ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΥΠΟΥΡΓΕΙΟ ΠΑΙΔΕΙΑΣ, ΕΡΕΥΝΑΣ ΚΑΙ ΘΡΗΣΚΕΥΜΑΤΩΝ ΓΕΝΙΚΗ ΓΡΑΜΜΑΤΕΙΑ ΕΡΕΥΝΑΣ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΕΛΛΗΝΙΚΟ ΚΕΝΤΡΟ ΘΑΛΑΣΣΙΩΝ ΕΡΕΥΝΩΝ 46,7 ΧΛΜ ΛΕΩΦ. ΑΘΗΝΩΝ ΣΟΥΝΙΟΥ Τ.Θ. 712, Τ.Κ. 19013 ΑΝΑΒΥΣΣΟΣ Ανάβυσσος: 30/10/2017 Πληροφορίες: Αρ. Πρωτ.: 20011/8665 Κ. Μπαλωμένου Τηλ.: 2291076405 e-mail: balk@hcmr.gr Για τις τεχνικές προδιαγραφές: M. Τσαπάκης Τηλ: 2810 337828 e-mail: tsapakis@hcmr.gr ΠΡΟΣΚΛΗΣΗ ΕΚΔΗΛΩΣΗΣ ΕΝΔΙΑΦΕΡΟΝΤΟΣ ΓΙΑ ΤΗΝ ΠΡΟΜΗΘΕΙΑ ΧΗΜΙΚΩΝ ΑΝΤΙΔΡΑΣΤΗΡΙΩΝ, ΕΡΓΑΣΤΗΡΙΑΚΩΝ ΑΝΑΛΩΣΙΜΩΝ ΚΑΙ ΑΕΡΙΩΝ Το Ελληνικό Κέντρο Θαλάσσιων Ερευνών (ΕΛΚΕΘΕ) έχοντας υπόψη: 1. Tις διατάξεις του Ν. 4412 2. τον Οδηγό Προμηθειών του ΕΛ.ΚΕ.Θ.Ε. 3. την απόφαση του ΔΣ του ΕΛΚΕΘΕ (256 η Συνεδρία της 30-6-2017) 4. την υπάρχουσα πίστωση στον ΕΛΚΕ του προγράμματος TΑPAS ΑΝΑΚΟΙΝΩΝΕΙ Τη δημοσίευση της πρόσκλησης εκδήλωσης ενδιαφέροντος για την προμήθεια χημικών αντιδραστηρίων, εργαστηριακών αναλωσίμων και αερίων συνολικού ποσού 6.815,66 πλέον Φ.Π.Α. και αναλύεται ακολούθως: Tμήμα 1: Xημικά αντδραστήρια με κωδ. CPV 33696300-8, ποσού 1.899,96 πλέον ΦΠΑ Τμήμα 2: Εργαστηριακά αναλώσιμα με κωδ. CPV 33790000-4, ποσού 3.323,14 πλέον ΦΠΑ Τμήμα 3: Αέρια με κωδ. CPV 24100000-5, ποσού 1.592,56 πλέον ΦΠΑ.
Η τιμή προσφοράς είναι δεσμευτική για τον προμηθευτή μέχρι την οριστική παραλαβή του αντικειμένου. Γίνονται δεκτές προσφορές για ένα ή περισσότερα Τμήματα. Δεν γίνονται δεκτές και απορρίπτονται ως απαράδεκτες, προσφορές που υποβάλλονται για μέρος Τμήματος. Το κριτήριο κατακύρωσης είναι η πλέον συμφέρουσα από οικονομική άποψη προσφορά βάσει τιμής. H οικονομική τεχνική προσφορά κάθε ενδιαφερόμενου θα πρέπει να έχει κατατεθεί ή αποσταλεί ταχυδρομικά, σε συστημένο και σφραγισμένο φάκελο με την ένδειξη: «Πρόσκληση εκδήλωσης ενδιαφέροντος για την προμήθεια χημικών αντιδραστηρίων, εργαστηριακών αναλωσίμων και αερίων» στη Γραμματεία πρωτοκόλλου του ΕΛ.ΚΕ.Θ.Ε. Κρήτης, (Διεύθυνση: ΕΛ.ΚΕ.Θ.Ε., Πρώην Αμερικανική Βάση Γουρνών, Τ.Κ. 71500 Δ. Χερσονήσου, Ηράκλειο Κρήτης, Τηλ. 2810 337806), μέχρι την Παρασκευή 10 Νοεμβρίου 2017 και ώρα 12.00 μ.μ. Οι οικονομικές τεχνικές προσφορές θα πρέπει να ικανοποιούν τα προβλεπόμενα από την παρούσα Πρόσκληση και το Παράρτημα Τεχνικών Προδιαγραφών. Ο Πρόεδρος Δ.Σ. & Διευθυντής ΕΛ.ΚΕ.Θ.Ε. Καθηγητής Σπυρίδων Α. Μαυράκος
ΤΕΧΝΙΚΕΣ ΠΡΟΔΙΑΓΡΑΦΕΣ ΤΜΗΜΑ 1 ΧΗΜΙΚΑ ΑΝΤΙΔΡΑΣΤΗΡΙΑ CPV 33696300-8 ΠΟΣΟ: 1.899,96 ΠΛΕΟΝ ΦΠΑ α/α Ζητούμενο Είδος Περιγραφή είδους Ποιότητα Συσκ Ποσ 1 Hydrofluoric acid 47-51%, TraceSELECT, for trace analysis Hydrofluoric acid TraceSELECT, for trace analysis, 47-51%. Density 1.15g/mL at 25 o C (lit.), Vapor Pressure 25mmHg (20 o C), Vapor Density 1.27(vs air), Boiling point 105 o C, Freezing point -35 C, Density 1.170 g/cm 3 500ml 1 2 TraceSELECT, for trace analysis, 69.0% (T) 69.0%, TraceSELECT, for trace analysis. Density 1.41 g/ml at 20 C, Vapor Pressure 8 mmhg ( 20 C), Boiling point 122 C, Freezing point -38 C, Density 1.420 g/cm 3 1L 5 3 Hydrogen peroxide solution 30%, TraceSE- LECT Ultra, for ultratrace analysis Hydrogen peroxide solution for ultratrace analysis, shelf life ~5 yr, concentration 25-35% 500ml 3 4 puriss. p.a., reag. ISO, reag. Ph. Eur., for determinations with dithizone, 65% Puriss. p.a., reag. ISO, reag. Ph. Eur., for determinations with dithizone, 65%, Vapor pressure 8 mmhg ( 20 C),ign. residue 0.0005% (as SO4), bp 120.5 C(lit.), density 1.37-1.41 g/ml at 20 C(lit.). 2.5L 2 5 Sodium hydroxide puriss. p.a., ACS reagent, reag. Ph. Eur., K 0.02%, 98%, pellets 6 Acetone 7 Acetone Acetone 8 Hydrochloric acid (HCL) Sodium hydroxide Acetone Pro analysis ACS hydrochloric acid puriss. p.a., ACS reagent, reag. Ph. Eur., K 0.02%, 98%, pellets.vapor density >1 (vs air), vapor pressure <18 mmhg ( 20 C),3 mmhg ( 37 C), impurities 0.0003% total nitrogen (N) 1kg 2 puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur. 2.5L 3 Pesticide analysis. Assay (GC) min. 99.8 %. Nonvolatile matter max. 0.0005 %. Water (Karl Fischer) max. 0.2 %. Suitability for residue analysis max. 5 ng/l puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, 37%, APHA: 10 2.5 Lt 4 2,5lt 5 9 Ethanol absolute ethanol absoluteanalytical reagent grade 99,8+%,for analysis,absolute,ar,meets the spec.of BP and ph.eur 2,5lt 2 10 Sulfuric Acid puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0% 2.5L 2 11 L-ASCORBIC ACID L-ASCORBIC ACID puriss. p.a., 99.0% (RT) puriss. p.a., 99.0% (RT), optical activity [α]20/d +21±0.5, c = 10% in H2O, ign. residue 0.1% (as SO4), loss 0.1% loss on drying, 110 C 250gr 1 12 13 Ammonium molybdate tetrahydrate Sodium Hydroxide puriss. p.a., ACS reagent 99.0% (T) SODIUM HYDROXIDE PELLETS puriss. p.a., ACS reagent 99.0% (T),CAS:12054-85-2, MW:1235.86, d:2,498g/ml at 25oC(lit) Sodium hydroxide pellets gr for analysis (max. 0.0002% K) acs, reag 1kgr 1 250gr 1
14 Propanol-2 Propanol-2 HPLC gradient grade 2.5 Lt 2 15 zinc acetate Zinc acetate 99.99% trace metals basis 99.99% trace metals basis 25g 1 ΤΜΗΜΑ 2 ΕΡΓΑΣΤΗΡΙΑΚΑ ΑΝΑΛΩΣΙΜΑ (33790000-4 ), ΠΟΣΟ 3.323,14 ΠΛΕΟΝ ΦΠΑ α/ α Ζητούμενο Είδος Περιγραφή είδους Ποιότητα Συσκ 1 2 3 4 5 6 Balance boats 5ml, white, 31x53x5.3mm ept.i.p.s. Standard volume range 100-5000μL (suitable for eppendorf and isolab pipettes) ept.i.p.s. Standard volume range 50-1000μL (suitable for eppendorf and isolab pipettes) (Eppendorf 30000978 κωδικός Sigma Z640158) Gloves nitrile powderfree Polycarbonate filter, 0.8μm pore size, 142mm Polycarbonate filter,0.8 μm pore size, 47 mm Weighing dishes (boats) Diamond Shape, 5ml, white, 31x53x5.3mm, non contaminating (made of HIPS with hydrophobic surface) ept.i.p.s. Standard volume range 100-5000μL for eppendorf pipette, violet tip, non-sterile ept.i.p.s. Standard volume range 50-1000μL suitable for eppendorf pipette, violet tip, nonsterile Latex-free disposable examination gloves and personal protective equipment made of soft, blue-coloured nitrile rubber, powder-free; with an chlorinated inner surface for easy donning; texturing of the finger area ensures optimum grip; highly elastic and especially tear-resistant; excellent fit and high tactile sensitivity; can be worn left or right. Hard-wearing medical glove for single use in all areas where staff are at particular risk of contamination; especially suitable for persons prone to latex allergies or who experience hypersensitivity reactions to glove powder. Suitable for use as medical device according to EN 455 and as personal protective equipment according to EN 374 category III - in laboratories, handling chemicals and disinfectants. May be 31x53x5,3m m/5ml pkg/ 250 2 volume range 100-5000μL pkg/ 100 1 volume range 50-1000μL pkg/250 1 used in direct contact with food. pkg/100 5 Polycarbonate filter, 0.8μm pore size, 142mm, 50/pk. This 142 mm Isopore hydrophilic membrane with 0.8 µm pore size is a polycarbonate, Polycarbonat track-etched screen filter recommended for e 50/pckg 1 analyses of airborne contaminants & other particles using optical or electron microscopy. Track-Etched Polycarbonate Membranes, diam. 47mm, pore size 0.8μm. Polycarbonate membranes are manufactured from high-quality polycarbonate film and have sharply defined pore sizes, high flow rates, and excellent chemical and thermal resistance. The membranes have a smooth flat surface and exhibit very low levels of extractables.low protein binding and low extractables ensuring no sample contamination.high chemical resistance and good thermal Polycarbonat e 100/pckg 1 Ποσότητα
stability for a wide range of samples.low, consistent ash and tare weights. Smooth flat surface for good visibility of particles. 7 8 9 10 11 Polycarbonate filter, 1.0 μm pore size, 142 mm Nylon Net Filter, 20μm pore size, 90mm Polycarbonate filter, 20 μm pore size, 47 mm Glass microfiber filters Glass microfiber filters Track-Etched Membranes, diam. 142 mm, pore size 1.0 μm, polycarbonate. Polycarbonate membranes are manufactured from high-quality polycarbonate film and have sharply defined pore sizes, high flow rates, and excellent chemical and thermal resistance. The membranes have a smooth flat surface and exhibit very low levels of extractables.low protein binding and low extractables ensuring no sample contamination.high chemical resistance and good thermal stability for a wide range of samples.low, consistent ash and tare weights. Smooth flat surface for good visibility of particles. Nylon Net Filter, 20μm pore size, 90mm, Hydrophilic 50/pk. For use in Collection of algae & cells, particle analysis, large particulate filtration, prefiltration of solvents, paint monitoring. Maximum Operating Temperature : 100 C Polycarbonate filter, 20 μm pore size, 47 mm glass microfiber filters, Grade GF/F, 0.7 μm pore size, 47mm diam., 0.42 mm thickness. Suitable for (DNA binding and purification; very effective in filtering finely precipitated proteins) glass microfiber filters, Grade GF/F, 0.7 μm pore size, 25 mm diam., 0.42 mm thickness. Suitable for (DNA binding and purification; very effective in filtering finely precipitated proteins) Polycarbonat e 25/pckg 2 Nylon 50/pckg 1 Polycarbonat e 100/pckg 1 Grade GF/F circles, 47mm pkg /100 5 Grade GF/F circles, 25mm pkg /100 5 12 plastic zip bags (WXh) 20X30cm pkg /100 2 13 plastic zip bags (WXh) 8X12cm pkg /100 2 14 plastic zip bags (WXh) 12X18cm pkg /100 2 15 plastic zip bags (WXh) 10X15cm pkg /100 2 MWCO 3 kda, material polypropylene tube regenerated cellulose membrane styrenebutadiene 0.5 ml centrifugal filters, 3 kda MWCO pore 16 Centrifugal filters size housing 24EA 1 17 Syringe Filters A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. pore size 0.22 μm, diam. 32 mm, sterile (Ethylene oxide), PES membrane pkg /100 1
18 19 20 21 22 23 Reagent and centrifuge tube Reagent and centrifuge tube 15 ml, 17x120mm, conical base, screw cap, transparent PP body - Hgh Density Polyethylene (HD- PE) cap, sterile, nonpyrogenic, autoclavable to 121 C, with printed writing space and graduation, 15500 x g Centrifugation max (RCF) pkg/50 20 50 ml, 28 mm x 115mm, conical/skirted base, screw cap, PP, transparent, sterile, nonpyrogenic, autoclavable to 121 oc, withe printed writing space and graduation. bag / 25 4 Reagent and centrifuge tube Reagent and centrifuge tube Αναλώσιμα Κατάδυσης Surface Marker Buoy 1 Αναλώσιμα Κατάδυσης Spool with SS DBL Clip 150 ft 1 Αναλώσιμα Κατάδυσης finger Reel 50m 1 Δοχεία αποθήκευσης pet 1 lit 50 ΤΜΗΜΑ 3 ΑΕΡΙΑ CPV: 24100000-5, ΠΟΣΟ: 1.592,56 ΠΛΕΟΝ ΦΠΑ α/α Ζητούμενο Είδος Περιγραφή είδους Ποιότητα Συσκ Ποσότητα 1 Argon Gas Cylinder (4.8) Argon Gas Cylinder (4.8) Αέριο αργό καθαρότητας 4.8 (99.998%) σε φιάλη 50λίτρων/200bar χωρητικότητας 10.7m3 τεμ 3
2 Liquid Argon Dewar (4.8) Liquid Argon Dewar (4.8) Υγρό αργό καθαρότητας >99.998% σε φορητή δεξαμενή χωρητικότητας 259Kg ή 180L αργού(απόδοση δεξαμενής 180L: maximum working pressure 24 bar, nomimal evaporation Rate (O2-Ar) 1.3%per day, Gas flow (O2-Ar) 9.2Nm3/hr, Relief Valve Setting 24bar. τεμ 2 3 Ήλιον 5.6 Ήλιο καθαρότητας 5.6 (99,9996%) σε φιάλη 50 λίτρων /200 bar χωρητικότητας 9,1 m3 τεμ 2