SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input OUTPUT RIPPLE & NOISE(max.) Note. 0mVp-p 0mVp-p 0mVp-p 00mVp-p 00mVp-p INPUT DIMMING & ON/OFF CONTROL EFFICIENCY (max.) 9% at full load and VDC/VDC input for LDD-00~700L/LW ; 9% at full load and VDC input for LDD-00~700LS DC CURRENT Full load Note. 00mA 0mA 00mA 00mA No load ma FILTER Capacitor Leave open if not use REMOTE ON/OFF Power ON with dimming: DIM ~ >. ~ 8VDC or open circuit Power OFF : DIM ~ < 0.VDC or short FREQUENCY 00 ~ KHz QUIESCENT INPUT CURRENT ma at dimming OFF and VDC input IN SHUTDOWN MODE(max.) PROTECTION SHORT CIRCUIT Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed OVER TEMPERATURE Tj 0 typically(ic) detect on main control IC Protection type : Shut down, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY -0 ~ + 8 (Refer to derating curve) 0% ~ 90% RH non-condensing for LDD-00~700L/LW ; 0% ~ 8% RH non-condensing for LDD-00~700LS ENVIRONMENT STORAGE TEMP., HUMIDITY - ~ +, 0 ~ 9% RH TEMP. COEFFICIENT ± 0.0% / VIBRATION 0 ~ 00Hz, G 0min./ cycle, period for 0min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 00 SAFETY STANDARDS EAC TP TC 00 approved EMC EMC EMISSION Compliance to EN0, FCC part class B, EAC TP TC 00 EMC IMMUNITY Compliance to EN000--,,,,8, light industry level, criteria A, EAC TP TC 00 OTHERS NOTE SWITCHING FREQENCY 0KHz ~ 000KHz EXTERNAL CAPACITANCE LOAD (max.).uf VOLTAGE RANGE 9 ~ VDC for LDD-00~700L/LW ; 9~ VDC for LDD-00~700LS MTBF DIMENSION WEIGHT POTTING MATERIAL 000Khrs min. MIL-HDBK-7F ( ).*9.9*8.9mm or 0.89"*0.9"*0." inch (L*W*H) for LDD-00~700L/LW ;.*0.*9.mm or "*0."*0." inch (L*W*H) for LDD-00~700LS LDD-00~700L:g ; LDD-00~700LW:7.g ; LDD-00~700LS :.g Expoxy(UL9-V0) for LDD-00~700L/LW ; without potted for LDD-00~700LS File Name:LDD-L-SPEC 08-0-
SPECIFICATION ORDER NO. LDD-000L LDD-00L LDD-00L CURRENT RANGE 000mA 00mA 00mA VOLTAGE RANGE Note. ~ 0VDC OUTPUT CURRENT ACCURACY (Typ.) ±% at VDC input RIPPLE & NOISE(max.) Note..Vp-p.Vp-p.Vp-p SWITCHING FREQENCY 000KHz EXTERNAL CAPACITANCE LOAD (max.).uf VOLTAGE RANGE ~ VDC EFFICIENCY (max.) 9% at full load and VDC/VDC input for LDD-000~00L/LW INPUT Full load Note. 990mA 0mA 0mA DC CURRENT No load ma FILTER Capacitor Leave open if not use REMOTE ON/OFF Power ON with dimming: DIM ~ >. ~.VDC or open circuit Power OFF : DIM ~ < 0.VDC or short FREQUENCY 00 ~ 00Hz DIMMING & ON/OFF CONTROL ANALOG DIMMING & ON/OFF CONTROL PROTECTION ENVIRONMENT EMC OTHERS NOTE QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(max.) REMOTE ON / OFF SHORT CIRCUIT WORKING TEMP. -0 ~ + 7 (Refer to derating curve) WORKING HUMIDITY 0% ~ 90% RH non-condensing for LDD-000~00L/LW ; 0%~8% RH non-condensing for LDD-000~00LS STORAGE TEMP., HUMIDITY - ~ +, 0 ~ 9% RH TEMP. COEFFICIENT ± 0.0% / VIBRATION 0 ~ 00Hz, G 0min./ cycle, period for 0min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 00 SAFETY STANDARDS EAC TP TC 00 approved EMC EMISSION EMC IMMUNITY MTBF DIMENSION WEIGHT POTTING MATERIAL ma at dimming OFF and VDC input Leave open if not use Power ON with dimming : DIM ~ >0.~.VDC or open circuit Power OFF : DIM ~ <0.VDC or short Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed Compliance to EN0, FCC part class B, EAC TP TC 00 Compliance to EN000--,,,,8, light industry level, criteria A, EAC TP TC 00 000Khrs min. MIL-HDBK-7F ( ).8*0.*.mm or."*0.8"*0.8" inch (L*W*H) for LDD-000~00L/LW ;.8*0.*0.9mm or."*0.8"*0." inch (L*W*H) for LDD-000~00LS LDD-000~00L:.g ; LDD-000~00LW:8g ; LDD-000~00LS:.8g Expoxy(UL9-V0) for LDD-000~00L/LW ; without potted for LDD-000~00LS File Name:LDD-L-SPEC 08-0-
Mechanical Specification Pin Configuration Blank type(ldd-00~700l): Unit: mm (inch) 9.9 [0.9].8 [ 0. ]. [0.0] DIM ON/OFF and Dimming Don't connect to 7.78 [0.7]. [0.89] 7. [0.0] ψ0.0 8.9 [0.] NOTE: Pin tolerance ± 0.0mm W type(ldd-00~700lw): 9.9 [0.9] 8.9 [0.] ± mm 00± 0mm.[0.89] (Red) DIM (White) (Black) (Blue) (Yellow) ON/OFF and Dimming Don't connect to NOTE: All wires UL8 AWG S type(ldd-00~700ls): 7.78 [0.70] 0. [0.0]. [0.0] 7 8 0 9 0. [0.0] A 0. [0.0] 7,8 9,0 DIM ON/OFF and Dimming Don't connect to A 9. [0.] others N.C. [.00] 0.0 [0.].8 [0.0] Recommended PCB layout (for LDD-00~700LS).mm.mm 0 9.[0.8].[0.] TOP 7 8.[0.0].[0.].[0.0] File Name:LDD-L-SPEC 08-0-
Mechanical Specification Blank type(ldd-000~00l): Unit: mm (inch) Pin Configuration 0. [0.80].0 [0.08].8 [0.].8 [.],,,, +analog DIM Don't connect to ON/OFF and / analog Dimming. [0.]. [0.0] ψ0.0. [0.8] NOTE: Pin tolerance ± 0.0mm W type(ldd-000~00lw): 0. [0.80] ± mm 00± 0mm. [0.8] NOTE: All wires UL8 AWG.8 [.] (Black) (Blue) (Yellow) +analog DIM (White) (Red) Don't connect to ON/OFF and / analog Dimming S type(ldd - 000~00LS): 0.[0.00].[0.09]. [.00] 0. [0.80].0 [0.08] 0. [0.0].8 [.]. [0.0],,,, +analog DIM Don't connect to ON/OFF and / analog Dimming.0 [0.0] 0.9 [0.]. [0.] others N.C No connection Recommended PCB layout (for LDD-000~00LS).mm.mm.0[.0].7[0.9] TOP.0[0.08].[0.].[0.0] File Name:LDD-L-SPEC 08-0-
Reflow Soldering Curve (for LDD-00~00LS) Derating Curve Temperature ( ) 0 0 0 00 0 0 0 sec. Max. (>0 ) Time(sec.) Peak. Temp 0 0 sec. Max. 0 Remark : The curve applies only to the " Hot Air Reflow Soldering" Dimming Control (for 00~00mA) LOAD (%) 00 7 0 7 for 00~00mA -0 0 0 7 8 Ta ( ) 8 for 00~00mA 00 Io Adjustment by signal : 00 ~ : H L Dimming LDD-00~00L st LED Last LED H: >.~8VDC or open circuit L: < 0.VDC or short 000 ~ 00mA : H: >.~.VDC or open circuit L: < 0.VDC or short Signal Output Current { { H(V) L(0V) Max 0 ON ON ON OFF OFF OFF 00~KHz Frequency : 00~ : 00~ KHz 000~ 00mA : 00~00Hz During dimming operation, the output current will change to style. Iout(%) 00 7 0 Tol : ± %(Typ.) 0 0 7 00 Duty Cycle (%) Analog Dimming Control for 000~ 00mA only Io Adjustment by DC voltage : 0.~.VDC Dimming LDD-000~00L st LED Last LED 0% Vdc input 00% Iout 0% 0% 00 ma 00 ma 000 ma 0% 0%.0.9.8.7.......0.9.8.7.......0 0.9 0.8 0.7 0. 0. 0. 0. 0. 0. 0 Voltage control(0.~.vdc) File Name:LDD-L-SPEC 08-0-
Efficiency VS Output Voltage(Number of LEDs) Fig- VDC input, ~ LEDs(Vf=V) Fig- VDC input, ~7 LEDs(Vf=V) EFFICIENCY (%) 00% 9% 90% 8% 00mA 0mA 00mA 00mA 000mA 00mA 00mA EFFICIENCY (%) 00% 9% 90% 8% 00mA 0mA 00mA 00mA 000mA 00mA 00mA 7% 7% 70% Output Voltage(LEDs) 70% 7 Output Voltage(LEDs) Fig- 00% 9% 90% VDC input, ~0 LEDs(Vf=V) 00 ma 0 ma 00 ma 00 ma 700 ma 000 ma 00 ma 00 ma EFFICIENCY (%) 8% 7% 70% % 7 8 9 0 Output Voltage(LEDs) File Name:LDD-L-SPEC 08-0-