DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant stainless steel shells, they are designed for the harsh environments of engines. They offer different keying options. SPECIFICATIONS MATING COMPATIBILITY MIL-DTL-3723 Series III connectors ESC and ESC15 Connectors RUGGED Designed specifically for engines Antivibration screw coupling connectors RELIABLE RFI shell-to-shell continuity VERSATILE Wide range of connector shell configurations Configurable filter topologies DESIGNED FOR HARSH ENVIRONMENTS Vibration and shock Temperature extremes High humidity Altitude Salt spray Environmental Temperature Range: -55 C to 5 C Physical Shock: Typical to EIA-364-27 Vibration: Typical to EIA-364-2 Fungus Resistance: Based on MIL-STD- Fluid Immersion: Typically tested to EIA-364- Salt Spray: Typically based on EIA/ECA-364-26 Humidity: Typically EIA-364-31 test method IV Durability: 500 cycles per MIL-DTL-3723 Electrical Grounded Line Resistance (Typ.): 15 mω Insulation Resistance (Typ.): >5 GΩ Dielectric Withstand (Typ.): <5 ma DWV: up to 00 VDC Working Voltage: up to 00 VDC Typical Test Specifications Used: MIL-STD-: Test Method Standard MIL-STD-2: Electrical & Electronic Component Parts RTCA DO-0: Test Procedures for Airborne Equipment EIA-364: Electrical Connector & Socket Test Procedures Filtering Capacitance Range: pf to 4 F Capacitance Tolerance: Typically % Unfiltered Line Cap (Typ.): 15 pf Filtering Topologies: L, C, LC, CL, Pi, T, Double T Transient protection available as per RTCA Publication DO 0 (see page 55). AEROSPACE, DEFENSE & MARINE /// DEUTSCH FILTER CONNECTORS PAGE 41
Jam Nut Receptacles 19.5 3 (1.496) 2.50 (.09) 3.1 (.5) (.315) 19.5 39.50 (1.555) F 4.06 (.0) 19.5 5 (2.23) 4.06 (.0) 2.50 (.09) 3.1 (.5) (.315) Solder Bucket 3. (.6) 1.50 (.059) Single Flange Double Flange Single Flange, Crimp Contacts A A/F B A/F L 4 Places T Flat S Dia. N 2 Places U Dia. C Dia. R Dia. P Sq. Double Flange Footprint Recommended Panel Cutout 1 2 A A/F Max. B A/F Max. C Dia. Max. F L Ref. Ref. N Ref. P Sq. R Dia. S Dia..9 (0.90) 2.04 (1.4) 32.79 (1.291) 35.33 (1.391) 3.51 (1.5) 41.6 (1.641) 44.6 (1.759) 49.63 (1.954) 52.1 (2.079) 59.21 (2.331) 21.06 (0.29).23 (0.953) 29.01 (1.2) 30.61 (1.5) 33.76 (1.329) 36.96 (1.455) 40.11 (1.579) 43.31 (1.705) 46.46 (1.29) 54.41 (2.00) 27.3 (1.07) 30.2 (1.192) 35.05 (1.30) 3.51 (1.5) 41.6 (1.641) 44.6 (1.759) 49.63 (1.954) 52.7 (2.07) 55.42 (2.12) 61.2 (2.434) 2.46 (0.097) 3.25 (0.) 1 1.00 (0.77) 1.65 (0.734) 25.25 (0.994) 2.40 (1.11) 31.55 (1.2) (1.35) 37.30 (1.469) 44.50 (1.752).00.00 17.00 (0.669) 1 (0.74) 25.00 (0.94) 27.00 (1.063) 2 (1.2) 31.00 (1.1) 35.00 (1.37) 32.06 (1.262) 35.06 (1.30) 39.06 (1.53) 42.06 (1.656) 45.06 (1.774) 4.06 (1.92) 51.06 (2.0) 56.06 (2.7).34.34 17.42 (0.66).72 (0.) 23.9 (0.941) 26.43 (1.041) 29.5 (1.5) 32.76 (1.290) 35.3 (1.411) 39.01 (1.536) Mounting Dims T Flat 1.67 (0.735) 23.42 (0.9) 25.02 (0.95) 2. (1.1) 31.25 (1.230) 34.42 (1.355) 37.59 (1.40) 40.77 (1.605) 47. (1.56).26 (0.640) 19.43 (0.765).1 (0.952) 25.7 (1.015) 2.96 (1.0) 32.13 (1.265) 35.31 (1.390) 3.4 (1.515) 41.65 (1.640) 4.01 (1.90) AEROSPACE, DEFENSE & MARINE /// DEUTSCH FILTER CONNECTORS PAGE 42
Square Flange Receptacles 1. (.71) 3 (1.496) D Dia. H Dia. 2.50 (.09) 3.1 (.5) (.315) 1. (.71) D Dia. 39.50 (1.555) 4. (.5) 2.50 (.09) 3.1 (.5) (.315) 1. (.71) D Dia. 59.50 (2.343) 4.06 (.0) Solder Bucket 3. (.6) 1.50 (.059) Single Flange Double Flange Single Flange, Crimp Contacts Main Polarizing Keyway A Sq. B Sq. L 4 Places B Sq. T Dia. S Dia. N 2 Places R Dia. P Sq. Double Flange Footprint Square Flange Mounting A Sq. Max. B Sq. D Dia. Max. H Dia. Max. L Ref. Ref. N Ref. P Sq. R Dia. S Dia. Mounting Holes T Dia..75 (0.17) 15.09 (0.594).27 (0.562).70 (0.500).00.34 15.0 (0.6) 23.93 (0.942) 1.26 (0.719) 17.47 (0.6) 15. (0.625).00.34 1.70 (0.736) 26.32 (1.036).62 (0.). (0.75) 19.05 (0.750) 1.65 (0.734) 17.00 (0.669) 32.06 (1.262) 17.42 (0.66) 23.40 (0.921) 2.71 (1.130) 31. (1.255) 23.01 (0.906).61 (0.969) 23.2 (0.93).23 (0.75) 25.40 (1.000) 1.00 (0.77) 25.25 (0.994) 1 (0.74) 35.06 (1.30) 39.06 (1.53).72 (0.) 23.9 (0.941) 3.05 (0.0).90 (0.90) 2.30 (1.1) 1 34. (1.34) 30.1 (1.1) 2.40 (1.11) 25.00 (0.94) 42.06 (1.656) 26.43 (1.041) 31. (1.2) 36.63 (1.442) 29.36 (1.156) 33.32 (1.3) 30.1 (1.17) 31.55 (1.2) 27.00 (1.063) 45.06 (1.774) 29.5 (1.5) (1.35) 39.0 (1.567) 31.75 (1.250) 36.53 (1.43) 33.32 (1.3) (1.35) 2 (1.2) 4.06 (1.92) 32.76 (1.290) 37.50 (1.476) 2 43.39 (1.70) 50.93 (2.005) 34.92 (1.375) 39.67 (1.562) 39.67 (1.562) 46.02 (1.) 36.50 (1.437) 44.45 (1.750) 1 37.30 (1.469) 44.50 (1.752) 31.00 (1.1) 35.00 (1.37) 51.06 (2.0) 56.06 (2.7) 35.3 (1.411) 3.0 39.01 (0.150) (1.536) 40.60 (1.59) 4 (1.90) AEROSPACE, DEFENSE & MARINE /// DEUTSCH FILTER CONNECTORS PAGE 43
Plugs A Dia. Max 21.30 (0.3).9 (0.90) 29.59 (1.5) W Thread Class 2A 0.5000- UNF 0.6250- UNEF 0.7500- UNEF A Dia. 3 (1.496) 2.50 (.09) 3.1 (.5) (.315) A Dia. 5 (2.23) 4.06 (.0) 31. (1.230) 34.42 (1.355) 0.750- UNEF 1.0000- UNEF Solder Bucket 3. (.6) PCB/Solder Bucket Contacts Crimp Contacts W Thread 1 37.34 (1.470) 41.91 (1.650) 1.0625-1 UNEF 1.175-1 UNEF Main Polarizing Keyway 44.07 (1.735) 1.35-1 UNEF 2 47. (1.60) 55. (2.175) 1.4375-1 UNEF 1.7500-1 UNS Keying Options (Plug Mating Face Shown) Keyway (In Degrees) Master Keyway A B Key/Keyway to 2 A B C D A B C D A B C D N (Normal) 5 0 215 265 5 0 215 265 5 0 215 265 6 2 132 3 2 132 3 1 192 259 C 7 0 11 230 3 0 11 230 3 92 152 2 342 35 0 5 275 35 0 5 275 4 152 4 334 D 9 64 155 234 304 64 155 234 304 135 199 0 Y 25 115 0 270 9 152 26 33 AEROSPACE, DEFENSE & MARINE /// DEUTSCH FILTER CONNECTORS PAGE 44
Insert Arrangements Filter Connector Series: 93 Industry Specification: MIL-DTL-3723 Series III Insert Arrangement Specification: MIL-STD-1554 1 Contact and Type Arrangement Quadrax 0-03 3 0-9 3-05 5-06 6-03 3 - -04 4-07 7-9 3-15 15 - - 1-02 2 1-0 1-1-31 31-04 4 - -25 19 6-2 4-39 37 2-41 41 - -19 19-30 6-32 26 6-39 27-55 55-30 30-57 55 2-61 61 2-06 6 2-42 42 AEROSPACE, DEFENSE & MARINE /// DEUTSCH FILTER CONNECTORS PAGE 45