Document No. EO A Original Jan., 2003 (Revised Feb., 2003)

Transcript

1 TEC Thermal Printer B-SX4T/SX5T SERIES List Document No. Original Jan., 2003 (Revised Feb., 2003) NOTE : Model names that end with "-R" are RoHS compliant models. If "-R" is not attached, that model is non RoHS compliant. Never install non RoHS compliant optional equipment or parts on a RoHS compliant machine which is supposed to be used in the countries that enforce the RoHS directive, as doing this is legally prohibited.

2 (Revision Date: May 9, 2006) TABLE OF CONTENTS HOW TO USE THIS PARTS LIST MECHANICAL PARTS 1. RIGHT SIDE BLOCK LEFT SIDE BLOCK SUPPLY DRIVE BLOCK PRINT HEAD BLOCK PINCH ROLLER BLOCK MISCELLANEOUS PARTS 6-1 OPTIONAL PARTS 30. SWING CUTTER MODULE (B-4205-QM/B-4205-QM-R) ROTARY CUTTER MODULE (B-8204-QM/B-8204-QM-R) OTHER OPTIONAL KITS RFID MODULE(B-9704-RFID-U1-US/EU, B-9704-RFID-H1-QM) WIRELESS LAN MODULE (B-9700-WLAN-QM-R) 34-1 ELECTRONIC PARTS 50. MAIN PC BOARD ASS'Y PCMCIA PC BOARD ASS'Y LAN PC BOARD ASS'Y USB PC BOARD ASS'Y ROTARY CUTTER PC BOARD ASS'Y MAIN 2 PC BOARD ASS'Y MAIN 3 PC BOARD ASS'Y 56-1 CAUTION! 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. 3. Please refer to your local Authorised Service representative with regard to any queries you may have in Copyright 2003 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

3 HOW TO USE THIS PARTS LIST 1) Indication of Ref. No. 1-1 Section No Section Name Consecutive Number 1 ~ 29 MECHANICAL PARTS Section Number 30 ~ 49 OPTIONAL PARTS 50 ~ 69 ELECTRONIC PARTS 2) Remarks column indicates the following information: (1) Interchangeability of parts (2) Accessory (3) Service part (4) Date when the parts are added/deleted/changed 3) The columns from A through K indicate the quantity/unit for each model. The letters A to K represent the model names which are described in the foot note. 4) The recommended parts column indicates the recommendation of parts stock. Q ty/100 Units Class A 10 Class B 7 Class C 5 Class D 3 Class E 1 5) Miscellaneous parts (screws, washers, etc.) shall be ordered in minimum lots of ) As a rule, parts not listed in this parts list cannot be ordered and we will not be responsible for problems concerning these parts. 7) The name of the electronic parts are abbreviated as below: 8) Please locally purchase the electronic parts without part numbers after referring to the descriptions. 9) The illustrations are provided by PDF files and attached to the list of each section. To refer to the illustrations, double-click on the PDF f 10) RoHS-compliant parts are indicated with "R" in the RoHS column. NOTES: 1. The parts shown in this list may be modified by TOSHIBA TEC together with issuing the parts information, if necessary. 2. The illustrations in this parts list are provided for reference and may be different from the actual parts in shape. 3. with no Ref. No. and quantity are interchangeable parts. 4. For the underlined assembly parts, the components are available separately. 5. Excepting the electronic parts, " " in the Part No. cell in place of a part number means that the part is an optional equipment and should be ordered from the Sales Department.

4 MECHANICAL PARTS 1 RIGHT SIDE BLOCK 1/2 (Revision Date: Mar. 1, 2005) SMW-3x6 E SMW-3x E-7 E A B E A B TT-3x5 SMW-3x6 11 SMW-2.6x6 4 12* * Note: The parts "Ref.No.1-12" of the B-SX5T series are different from that of B-SX4T series in shape. E-3 1-1

5 1 RIGHT SIDE BLOCK 2/2 (Revision Date: Mar. 1, 2005) E-5 27 E-5 E-5 E-5 TT-4x TT-4x8 34 SW NOTE: 7FM (for B-SX4T-GS10/20-CN, SX5T-TS12/22) does not contain Ref. Nos (1-28 to 1-31) and 1-27, and E E W-2 51 PT-2x6 W-8 N PT-2.6x12 58 N-4 E-7 E-7 PT-3x

6 1. RIGHT SIDE BLOCK 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 1-1 7FM Top Cover Ass'y for TEC brand model, gray FM Top Cover Ass'y for Century Systems model, dark gray Added: 10/' FM Top Cover Ass'y (See Note2) for TEC brand model, gray Changed:6/' FM Top Cover Ass'y for METO model, Pantone 432C Changed:6/' FM Top Cover Ass'y for TOSHIBA brand model, cool black Added: 2'/05, GS20/TS22 model FM Top Cover Ass'y for TOSHIBA brand model, cool black Added: 1/' HZC Damper TD16A1-25K-01 R FM Media Sensor Shaft FMEC Front Plate FMEC Front Plate HAA Set Screw M-4x6 (*1) A 7FM Set Screw M-4x6 (*1) Added: 1/' A 1-6 FMDB Holder Plate Shaft FM Ribbon Shaft Holder Plate Ass'y FM Ribbon Shaft Holder Plate Ass'y Added: 04/' Ribbon Shaft Holder Plate Ass'y Added: 1/' FM FM Media Sensor Ass'y B 7FM Media Sensor Ass'y Added: 1/' B 1-9 7FM Media Sensor Guide F Shaft Holder F8-23 R F Press Stud TL-161 R FM Ribbon Stopper Ass'y FMHC Ribbon Stopper Ass'y FMBD Supply Holder Ass'y C FMBD Supply Holder Ass'y Added: 1/' C 1-14 FMQB Damper Spring FM Damper Arm Ass'y FM Damper Arm Ass'y Added: 1/' FMEB Damper Washer FMHB Damper Spacer FMBB FAN Filter Accessory FMHB Filter Retainer Accessory FMQB Filter Pad Accessory E FM CD-ROM for TEC brand model Accessory FM Changed:6/' FM CD-ROM for TEC brand model Accessory FM Changed:6/' FM CD-ROM for METO model Accessory Added: 5/'04 7FM CD-ROM for TOSHIBA brand model Accessory, GS20/TS22 model Added: 2/'05 7FM CD-ROM for TOSHIBA brand model Accessory, GS20/TS22 model Added: 2/'05 7FM CD-ROM for RoHS compliant model Added: 1/' A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

7 1. RIGHT SIDE BLOCK 2 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 1-22 FBCB Power Cord US Accessory D 1-23 EKA Power Cord EU Accessory D EKA Changed: 2/' FM Firmware FDK Service part for B-SX4T FM Firmware FDK Service part for B-SX5T Deleted: 10/' FMCD Top Cover FMCD Top Cover Added: 1/' FMBB Damper Link Ass'y FMDB Damper Shaft S FMEB Damper Link S FMDB Damper Shaft L FMQB Damper Spring FMEB Damper Link L FMHB Edge Guard FM Front Cover for TEC brand model, gray FM Front Cover for Century Systems model, dark gray Added: 10/' FM Front Cover for METO model, Pantone 432C Added:5/' FM Front Cover for TOSHIBA brand model, cool black Added: 2/'05, GS20/TS22 model FMHD Supply Window JFQB Flat Push Nut FMHC Ribbon Holder Knob FM Head Lever Position Label FM Head Lever Position Label Added: 04/' FM Media Sensor Label FM Sensor Cap FM Upper Sensor (TR) B 7FM Upper Sensor (TR) Added: 1/' B FM Upper Sensor Holder FM Sensor Cover FM Fulcrum Shaft FM Lower Sensor Holder FM Lower Sensor (LED) B 7FM Lower Sensor (LED) Aded: 1/' B 1-46 FMHC Ribbon Flange FMHC Ribbon Flange Hook FMBD Supply Holder Sub Ass'y FMHD Supply Core A FMHC Supply Rack Gear L D 1-51 FMHC Supply Rack Gear R D 1-52 FMHB Supply Gear D 1-53 FMHB Supply Core Spacer A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

8 1. RIGHT SIDE BLOCK 3 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 1-54 FMHE Supply Core B X20K Hex. Bolt H-8x X Hex. Bolt H-8x80 R Added: 1/' FMHE Supply Holder L FMEB Holder Lock Plate FMBC Supply Holder R Ass'y FMHB Damper Roller FM Damper Shaft FMCB Damper Arm Sub Ass'y D Ferrite Core TFT Txxxxxx or before F Cable Band ALT-096S T-100 3Txxxxxx or before FMMC Warranty Sticker for TEC brand model Added: 04/' FM Warranty Sticker for TOSHIBA brand model Added: 2/'05, GS20/TS22 model FM CD-ROM Accessory Added: 2/' FM Power Cord CN Accessory Added: 2/'05 NOTE 1: Same in this List Ref. No. Ref. No. Description (*1) Head Up/Slit Sensor TLP1242 (C6) (*2) Cable Bush OLB-13 (*3) Cable Clamp K-103G (*4) Idler Gear (*5) Holder Stopper (*6) Locking Support LCBT-3S (*7) Motor Drive Harness Ref. No and 3-49 are the optional parts for the B-9904-H-QM, therefore these are listed individually. NOTE 2: These parts are supplied only as an assembly. Ref. Nos to 3-40 are only for the ribbon shaft ass'y (Feed) (FMBC /FMBC ). A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

9 2 LEFT SIDE BLOCK 1/3 (Revision Date: Jan. 23, 2006) B B 49 B B C 2 SMW-3x6 A 1 SMW-3x6 SMW-3x6 SMW-3x6 W-3* C (B) A B C SMW-4x D E A 9 D 47 SMW-3x6 E-6 SMW-3x6 SMW-3x6* F 6 12 E 4 F SMW-3x

10 2 LEFT SIDE BLOCK 2/3 (Revision Date: Oct. 31, 2003) 23 B-4x35 B SMW-3x6 B N-4 B-4x SMW-3x6 A 31 A

11 2 LEFT SIDE BLOCK 3/ PT-2x6 W-3 W-3 PT-3x8 PT-3x SMW-3x6 SMW-3x SMW-3x6 SMW-3x E-4 E-5 E

12 2. LEFT SIDE BLOCK 1 (Revision Date: Jun. 7, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 2-1 7FM MAIN PC Board Ass'y (Service No. B ) 3T or before E 7FM MAIN 2 PC Board Ass'y (Service No. B ) 3T to 4Pxxxxxx Added:10/'03 7FM MAIN 2 PC Board Ass'y (Service No. B ) 4Sxxxxxx or later Added: 9/'04 7FM MAIN PC Board Ass'y (Service No. B ) 3T or before E 7FM MAIN 2 PC Board Ass'y (Service No. B ) 3T to 4Pxxxxxx Added:10/'03 7FM MAIN 2 PC Board Ass'y (Service No. B ) 4Sxxxxxx or later Added: 9/'04 7FM MAIN PC Board Ass'y (Service No. B ) 3Txxxxxx or before E 7FM MAIN 2 PC Board Ass'y (Service No. B ) 3Wxxxxxx to 4Pxxxxxx Added:10/'03 7FM MAIN 2 PC Board Ass'y (Service No. B ) 4Sxxxxxx or later Added: 9/'04 7FM MAIN PC Board Ass'y (Service No. B ) 3Txxxxxx or before E 7FM MAIN 2 PC Board Ass'y (Service No. B ) 3Wxxxxxx to 4Pxxxxxx Added: 10/'03 7FM MAIN 2 PC Board Ass'y (Service No. B ) 4Sxxxxxx or later 7FM MAIN 3 PC Board Ass'y (Service No. B ) R Added: 1/' FM MAIN 3 PC Board Ass'y (Service No. B ) R Added: 1/' FM Blind Plate FM Blind Plate Expansion I/O VD PS Unit (QP) E 7FM Changed:6/'04 8VD PS Unit (QQ) E 7FM Changed:6/'04 7FM PS Unit (QM) Added: 1/' FM Ribbon Motor Ass'y FM Ribbon Motor Ass'y Added: 1/' FM Spring FM Magnet Attachment Plate F Magnet MC-0099 No C 2-9 FMHB Nut Cap FM Solenoid B-9904-R-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 D 7FM Solenoid Type 2 B-9904-R2-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 Added: 10/'03 7FM Solenoid Type 2 B-9904-R2-QM-R (1) 1 Added: 1/' FM Head Block Fulcrum Shaft C Head Up/Slit Sensor TLP1242 (C6) (*1) B C Head Up/Slit Sensor TLP1242 (C6 F) (*1) R Added: 1/' FM Sensor Attachment Plate FM Operation Panel Ass'y for TEC brand model, gray FM Operation Panel Ass'y for Century Systems model, dark gray Added: 10/' FM Operation Panel Ass'y for METO model, Pantone 432C Added: 5/' A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

13 2. LEFT SIDE BLOCK 2 (Revision Date: Jun. 7, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 7FM Operation Panel Ass'y for TOSHIBA brand model, cool black Added: 2/'05, GS20/TS22 model FM Operation Panel Ass'y for TOSHIBA brand model, cool black Added: 1/' HCMB Energy Star Label R FM Model Name Label for TEC brand model 4Txxxxxx or before FM Model Name Label (RFID ready) for TEC brand model 4Wxxxxxx or later Added: 10/'04 7FM Model Name Label for TEC brand model 4Txxxxxx or before FM Model Name Label (RFID ready) for TEC brand model 4Wxxxxxx or later Added: 10/'04 7FM Model Name Label for METO model Added: 5/' FM Model Name Label (RFID ready) for TOSHIBA brand model Added: 2/'05, GS20/TS22 model FM Model Name Label (RFID ready) for TOSHIBA brand model Added: 2/'05, GS20/TS22 model FMMC Supply Set Label R Deleted:2/' FMMC Supply Set Label Added 04/' F Cable Clamp CKN-13 Deleted:10/' FM Sensor Harness E 2-20 F Cable Clamp CKN F Cable Clamp DKN-10G R Added:10/' F Cable Clamp CKN-05 R F Cable Clamp DKN-5G R Added: 10/' FM Power Harness E 7FM Power Harness Added: 1/' FM Side Panel (L) FMQB Fan Spacer VD Fan Motor R D FM Fan Base SX4T: 3T or before SX5T: 3Txxxxxx or before FM Fan Cover SX4T: 3T or before SX5T: 3Txxxxxx or before 2-28 F Locking Support LCBT-3S R B-9904-R/R2-QM (3) (3) 3 3 (3) (3) 3 (3) 3 (3) (3) FMBB RSV Interface PC Board Ass'y B-9904-R/R2-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E 7FM RSV Interface PC Board Ass'y B-9904-R2-QM-R (1) 1 Added: 1/' FM Solenoid Harness B-9904-R/R2-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) 1 E 2-31 FMMC Caution Label ABC FMMC PL Caution Label ET-2100 Added: 04/' FM Supply Loading Instruction Label FM Supply Loading Instruction Label Added: 04/' FM Front Panel for TEC brand model, gray FM Front Panel for Century Systems model, dark gray Added: 10/' FM Front Panel for METO model, Pantone 432C Added: 5/' FM Front Panel for TOSHIBA brand model, cool black Added: 2/'05, GS20/TS22 model FM Front Panel for TOSHIBA brand model, cool black Added: 1/' FM LED PC Board Ass'y E 7FM LED PC Board Ass'y Added: 1/' FM LCD E 7FM LCD Added: 1/' A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

14 2. LEFT SIDE BLOCK 3 (Revision Date: Jun. 7, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L FM LED-LCD Cable E 7FM LED-LCD Cable Added: 1/' FM LED PC Board Cable E FM Slit Sensor Mounting Plate (Feed) FM Ribbon Motor (Feed) D 7FM Ribbon Motor (Feed) Added: 1/' FM Ribbon Motor (Take-up) D 7FM Ribbon Motor (Take-up) Added: 1/' FM Slit Sensor Mounting Plate (Take-up) FMHC Ribbon Take-up Slit Gear D 2-44 FMHC Ribbon Feed Slit Gear D 2-45 FMHB Idler Gear R D 2-46 FMBC EXPIO PC Board Ass'y (NOTE 1) (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E EXPIO PC Board Ass'y R (NOTE 1) Added: 1/' (1) 1 E 2-47 FMCB EXPIO Harness (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E FMCB EXPIO Harness Added: 1/' (1) 1 E FM USB PC Board Ass'y (NOTE 2) B-9700-USB-QM/QM-R (1) (1) (1) (1) 1 (1) (1) (1) (1) (1) (1) (1) E Added: 10/' FM Blind Plate Added: 1/' Note: Same List Ref. No. Ref. No. Description (*1) Head Up/Slit Sensor TLP1242 (C6) ( ): Option NOTES: 1. The EXPIO PC Board Ass'y (Ref. No. 2-46) is included as a standard part of the B-SX5T series. However, this is the optional equipment for the B-SX4T series. If you would like to purchase this PC Board Ass'y, please order from the Sales Department of TOSHIBA TEC CORPORATION Headquaters. 2. The USB PC Board Ass'y (Ref. No. 2-48) is included as a standard part of the B-SX4T-GS10-QQ-CCS series. However, this is the optional equipment for the B-SX4T and B-SX5T series. If you would like to purchase this PC Board Ass'y, please order from the Sales Department of TOSHIBA TEC CORPORATION Headquarters. A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

15 3 SUPPLY DRIVE BLOCK 1/3 (Revision Date: Mar. 1, 2005) SMW-3x6 1 2 W-4 A SW-6 N-6 W-8 W-4 B 6 7 * C SMW-3x D SMW-3x SMW-3x W A C D B

16 3 SUPPLY DRIVE BLOCK 2/3 (Revision Date: Oct. 15, 2004) E-5 31 E-5 32 SMW-3x6 E-5 3 D-3x E E B-3x3 W-4 W-4 E B-3x3 W-4 E-3 3-2

17 3 SUPPLY DRIVE BLOCK 3/ FL-3x5 FL-3x5 55 SMW-3x5* N-6 SW-6 A SMW-3x E-10 W E E-5 E E-5 B-3x4 52 FL-3x FL-3x5 45 FL-3x5 A W-6 E-5 Note: The Rewinder Ass'y is the option for the B-SX4T. 3-3

18 3. SUPPLY DRIVE BLOCK 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 3-1 C Head Up/Slit Sensor TLP1242 (C6) (*1) B C Head Up/Slit Sensor TLP1242 (C6 F) (*1) R Added: 1/' F Cable Bush OLBT-13 (*2) R F Edge Guard LES-1010 R F Edge Guard EDS FM Main Frame Ass'y FM Main Frame Ass'y FM Main Frame Ass'y Added: 1/' FM Main Frame Ass'y Added: 1/' FCA Timing Belt 60S2M172UG B F R Added:10/'03 F Timing Belt 60S2M164UG B 3-7 7FM Stepping Motor Ass'y FM Stepping Motor Ass'y FM Stepping Motor Ass'y Added: 1/' FM Stepping Motor Ass'y Added: 1/' FMBB Stepping Motor E FMBB Stepping Motor FMBB Stepping Motor Added: 1/' FMBB Stepping Motor Added: 1/' FMBD Rewinder Guide Plate B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 FMBD Rewinder Guide Plate B-9904-H-QM-R (1) 1 Added: 1/' FM Base Ass'y FM Base Ass'y Added: 1/' Plastic Foot 1325 R Cable Clamp K-103G (*3) F R Added:10/' FMHB Rewind Paper Guide B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) FMBB Rewind Full Sensor (LED) B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 B FMBB Rewind Full Sensor (LED) B-9904-H-QM-R (1) FMBB Strip Sensor (LED) B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 B FMBB Strip Sensor (LED) B-9904-H-QM-R (1) FMBB Strip Sensor (TR) B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 B FMBB Strip Sensor (TR) B-9904-H-QM-R (1) 1 Added: 1/' FMQB Anti-static Brush 135 mm F Shaft Holder RNR-1760X2ZZ B FM Platen Holder FM Feed Roller Holder FM Strip Shaft FM Platen B FM Feed Roller B FM Media Guide Ass'y E 7FM Media Guide Ass'y Added: 1/' A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

19 3. SUPPLY DRIVE BLOCK 2 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 3-25 FMBC Ribbon Shaft Ass'y (Take-up) FMBC Corrected:10/'03 FMBC Ribbon Shaft Ass'y (Take-up) FMBC Corrected:10/'03 FMBC Ribbon Shaft Ass'y (Take-up) Added: 1/' FMBC Ribbon Shaft Assy (Take-up) Added: 1/' FMBC Ribbon Shaft Ass'y (Feed) FMBC Corrected:10/'03 7FM Interchangeable (NOTE 2) Added:10/'03 FMBC Ribbon Shaft Ass'y (Feed) FMBC Corrected:10/'03 7FM Interchangeable (NOTE 2) Added:10/'03 7FM Ribbon Shaft Ass'y (Feed) Added: 1/'06 (NOTE 2) FM Ribbon Shaft Ass'y (Feed) Added: 1/'06 (NOTE 2) FMBD Rewinder Ass'y B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 FMBD Rewinder Ass'y B-9904-H-QM-R (1) 1 Added: 1/' FM EU Standard Label for TEC brand model FM EU Standard Label for TOSHIBA brand model Added: 2/'05, GS20/TS22 model FMMB FCC Label R FMMB DOC Label R FMBB ROM Version up label FM Platen Pulley D 3-32 FMHB Idler Gear (*4) R D 3-33 FDB PCB Support CS-10S F Changed: 10/' FMQB Damper Stopper Rubber FMDC Ribbon Shaft FM Ribbon Shaft (Feed) FMCB Ribbon Holder FMCB Ribbon Holder FMCB Ribbon Holder FMQB Holder Stopper (*5) R FMQB Ribbon Back Tension Washer FMEB Back Tension Stopper FMBC Ribbon Back Tension Block A 3-41 FMHB Dummy Spacer FDB Locking Support LCBT-3S (*6) B-9904-H-QM (3) (3) 3 3 (3) (3) 3 (3) 3 (3) F Locking Support LCBT-3S (*6) R (3) 3 FDB Locking Support KGLS-3S Interchangeable F R 3-43 FMHB Idler Gear (*4) R B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) 1 D 3-44 FMHB Take-up Gear B-9904-H-QM/QM-R (3) (3) 3 3 (3) (3) 3 (3) 3 (3) (1) 1 D A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

20 3. SUPPLY DRIVE BLOCK 3 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 3-45 FMDC Take-up Shaft B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) FMCB Take-up Holder B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 FMCB Take-up Holder B-9904-H-QM-R (1) FMEB Ribbon Shaft Stopper B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 FMEB Ribbon Shaft Stopper B-9904-H-QM-R (1) FMDC Take-up Clip B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) FMQB Holder Stopper (*5) R B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) FM Rewinder Motor B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E 7FM Rewinder Motor B-9904-H-QM-R (1) FMCB Motor Drive Harness (*7) R B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) 1 E FM PWA-SX PC Board Ass'y B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E 7FM PWA-SX PC Board Ass'y B-9904-H-QM-R (1) FMBB Rewind Full Sensor (TR) B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 B FMBB Rewind Full Sensor (TR) B-9904-H-QM-R (1) FMBB Slide Switch B-9904-H-QM (1) (1) 1 1 (1) (1) 1 (1) 1 (1) 0 0 E 7FM Slide Switch B-9904-H-QM-R (1) FMMB Slide Switch Label B-9904-H-QM/QM-R (1) (1) 1 1 (1) (1) 1 (1) 1 (1) (1) FM Platen Frame Side Added: 9/' FM Platen Frame Top Added: 9/' FM RFID Attachment Plate B Added: 10/' FM RFID Attachment Plate A Added: 10/' ( ): Option NOTE 1: Same in this List Ref. No. Ref. No. Description (*1) Head Up/Slit Sensor TLP1242 (C6) (*2) Cable Bush OLB-13 (*3) Cable Clamp K-103G (*4) Idler Gear (*5) Holder Stopper (*6) Locking Support LCBT-3S (*7) Motor Drive Harness Ref. No and 3-49 are the optional parts for the B-9904-H-QM, therefore these are listed individually. NOTE 2: These parts are supplied only as an assembly. Ref. Nos to 3-40 are only for the ribbon shaft ass'y (Feed) (FMBC /FMBC ). A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

21 4 PRINT HEAD BLOCK 1 2 E SMW-3x SMW-3x6 6 E E-2 E SMW-3x6 SMW-2.6x6* SMW-2.6x6* SMW-3x SMW-3x8*

22 4. PRINT HEAD BLOCK 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 4-1 7FM Head Harness (Power) E 4-2 7FM Head Harness (Signal) E 4-3 7FM Ribbon End Sensor Harness E 4-4 F Cable Band ALT-096S T F Cable Band CV-100 Added:10/' SX5T: Reduced: 10/'03 SX4T: Reduced: 11/' FM Head Fulcrum Shaft FMQB Anti-static brush 30 mm FM Anti-static brush FM Cord Keep FM Head Up Sensor Plate FM Head Cam Shaft FM Head Bracket Ass'y FM Head Bracket Ass'y Added: 1/' FM Print Head Ass'y 4Pxxxxxx or before A 7FM Print Head 2 Ass'y 4Sxxxxxx or later A Added: 9/'04 7FM Print Head Ass'y 4Txxxxxx or later A 7FM Print Head 2 Ass'y 4Wxxxxxx or later A Added:11/'04 7FM Print Head 2 Ass'y Added: 1/' A 7FM Print Head 2 Ass'y Added: 1/' A FM Head Up Bush F Bracket F4-43 (*1) R F Bracket S4-58 (*2) R FM Ribbon Guide Shaft FM Head Lever FM Ribbon End Sensor Cover FM Ribbon End Sensor B 7FM Ribbon End Sensor R Added: 1/' B FM Ribbon End Sensor Attachment Plate FMQB Anti-static Brush 22mm Notes: Same List Ref. No. Ref. No. (*1) Bracket F4-43 (*2) Bracket S4-58 Description A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

23 5 PINCH ROLLER BLOCK (Revision Date: May 12, 2006) 14 A 15 3 N SMW-3x6 16 E-4 A 7 SMW-3x SMW-3x6 8 9 E-2 E

24 5. PINCH ROLLER BLOCK 1 (Revision Date: May 12, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L 5-1 HDG Plastic Head Screw M-3x FM Plastic Head Screw M-3x8 Added: 1/' FM Media Sensor Attachment Plate FM Bush FM Joint FM Pinch Roller Spring FM Sheet F Timing Belt 40S3M219UG B 5-8 F Bracket F4-43 (*1) R F Bracket S4-58 (*2) R FM Pinch Roller Gear D FM Gear Stud FM Pinch Roller Ass'y E 7FM Pinch Roller Ass'y E FM Pinch Roller Shaft FM Pinch Roller Cover Assy Added: 5/' FM Pinch Roller Cover Assy Added: 5/' FM Pinch Roller Cover Added: 5/' FM Pinch Roller Spring Plate Added: 5/' FM Pinch Roller Frame Added: 5/' Notes: Same List Ref. No. Ref. No. (*1) Bracket F4-43 (*2) Bracket S4-58 Description A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

25 6. MISCLANEOUS PARTS 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L B-3x3 24B Bind Screw M-3x3 B-3x4 24B Bind Screw M-3x4 R Added: 1/'06 B-4x5 X Bind Screw M-4x5 R B-4x35 X Bind Screw M-4x35 D-3x6 X Dish Head Screw M-3x6 X Dish Head Screw M-3x6 R Addedd: 1/'06 FL-3x5 X Flanged Screw M-3x5 X Flanged Screw M-3x5 R Added: 1/'06 FL-4x6 X Flanged Screw M-4x6 X Flanged Screw M-4x6 R Added: 1/'06 FL-4x8 X Flanged Screw M-4x8 X Flanged Screw M-4x8 R Added: 1/'06 PT-2x6 X P-TITE Screw M-2x6 X P-TITE Screw M-2x6 Added: 1/'06 PT-2.6x12 X P-TITE Screw M-2.6x12 X P-TITE Screw M-2.6x12 R Added: 1/'06 PT-3x6 X P-TITE Screw M-3x6 Added:5/'05 PT-3x8 X P-TITE Screw M-3x8 X P-TITE Screw M-3x8 R Added: 1/'06 PT-3x10 X P-TITE Screw M-3x10 X P-TITE Screw M-3x10 R Added:1/'06 SM-4x6C X Sems Screw M-4x6 (SMW-4x6) X Sems Screw M-4x6 R Added: 1/'06 SM-4x8C X Sems Screw M-4x8 SMW-2x6 X Double Sems Screw M-2x6 SMW-2x10 X Double Sems Screw M-2x10 Added:5/'05 SMW-2x16 X Double Sems Screw M-2x16 SMW-2.6x6 X Double Sems Screw M-2.6x6 X Double Sems Screw M-2.6x6 Added: 1/'06 SMW-2.6x6* X Double Sems Screw M-2.6x6 Small washer X Double Sems Screw M-2.6x6 Added: 1/'06 SMW-3x5 X Double Sems Screw M-3x5 X Double Sems Screw M-3x5 R Added: 1/'06 SMW-3x5* X Double Sems Screw M-3x5 Small washer X Double Sems Screw M-3x5 R Added: 1/'06 SMW-3x6 X Double Sems Screw M-3x6 X Double Sems Screw M-3x6 R Added: 1/'06 SMW-3x6* X Double Sems Screw M-3x6 Small washer SMW-3x6** X Double Sems Screw M-3x6 R Small washer Added:5/'05 SMW-3x6*** X Double Sems Screw M-3x6 R Added:5/'05 SMW-3x8 X Double Sems Screw M-3x8 SMW-3x8* X Double Sems Screw M-3x8 Zinc X Double Sems Screw M-3x8 R Added: 1/'06 SMW-3x8** X Double Sems Screw M-3x8 Small washer SMW-3x10 X Double Sems Screw M-3x10 A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

26 6. MISCLANEOUS PARTS 2 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L SMW-3x12 X Double Sems Screw M-3x12 SM-3x15B X Double Sems Screw M-3x15 (SWM-3x15) X Double Sems Screw M-3x15 R Added: 1/'06 SMW-4x6 X Double Sems Screw M-4x6 X Double Sems Screw M-4x6 R Added: 1/'06 SMW-4x6* X Double Sems Screw M-4x6 Small washer X Double Sems Screw M-4x8 X Double Sems Screw M-4x8 R * X Double Sems Screw M-4x8 Small Washer X Double Sems Screw M-4x8 R Small washer Added: 1/'06 SMW-4x10 X Double Sems Screw M-4x10 Small washer X Double Sems Screw M-4x10 Added: 1/'06 TT-3x5 X TAP-TITE Screw M-3x5 TT-4x8 X TAP-TITE Screw M-4x8 E-2 X Retaining Ring E type M-2 R E-3 X Retaining Ring E type M-3 R E-4 X Retaining Ring E type M-4 R E-5 X Retaining Ring E type M-5 R E-6 X Retaining Ring E type M-6 R E-7 X Retaining Ring E type M-7 R E-10 X Retaining Ring E type M-10 N-2 X Nut M-2 N-3 X Nut M-3 X Nut M-3 Added: 1/'06 N-4 X Nut M-4 X Nut M-4 R Added: 1/'06 N-6 X Nut M-6 X Nut M-6 R Added: 1/'06 N-8 X Nut M-8 X Nut M-8 R Added: 1/'06 W-2 X Washer M-2 X Washer M-2 R Added: 1/'06 W-3 X Washer M-3 X Washer M-3 Added: 1/'06 W-3* X Washer M-3 W-4 X Washer M-4 W-6 X Washer M-6 Added: 1/'06 X Washer M-6 R Added: 1/'06 W-6* X Washer M-6 R Added: 1/'06 W-8 X Washer M-8 X Washer M-8 R Added: 1/'06 SW-4 X Spring Washer M-4 SW-6 X Spring Washer M-6 X Spring Washer M-6 R Added: 1/'06 A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

27 OPTIONAL PARTS 30 SWING CUTTER MODULE (B-4205-QM/B-4205-QM-R) (Revision Date: Jan. 23, 2006) SM-4x6C 5 20 SM-4X8C SM-3x15B 16 FL-4x FL-4x8C FL-3x5 22 FL-4x

28 30. SWING CUTTER MODULE 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K 30-1 GFM Cutter Unit 1 0 E G Cutter Unit Added: 1/' FMBC Media Guide B White Screw M-3x4 (*1) 1 0 A 7FM White Screw M-3x4 (*1) Added: 1/' FMCC Media Guide A R FMQB Brush 128 mm R HDA Cover Holding Screw 2 0 A F Cover Holding Screw R Added: 1/' FDB Locking Support LCBT-3S (*2) R FMBB CUT I/F PC Board Ass'y (Service No. B ) 1 0 E 7FM CUT I/F PC Board Ass'y R (Service No. B ) Added: 1/' FMBB Cover Open Switch 1 0 E 7FM Cover Open Switch Added: 1/' FMDB Cutter Attaching Screw R 2 2 A FMBC Cutter Cover 1 0 E FMBD Cutter Cover Added: 1/' FMCB Motor Drive Harness (*3) R 1 1 E FMQB Cleaner (*4) R 1 1 A ZBA Arm and Clutch Kit Service part FMEB Cutter Link Cover R 1 0 FMEB Cutter Link Cover Added: 1/' FMEC Cutter Guide Plate B R FMEC Cutter Guide Plate A R ZBA Cutter Micro Switch Ass'y FMED Cutter Frame R 1 0 FMED Cutter Frame Added: 1/' FMEB Cutter Release Lever R 1 0 FMEB Cutter Release Lever Added: 1/' FMQB Cutter Guide Sheet R F Cable Bush OLBT-13 (*5) R Cable Band 2 0 F Cable Band PLT1M R Added: 1/' NOTE: B-4205-QM is exclusively for the B-SX4T, SP40II, or B-SX5T series. B-4205-QM-R is exclusively for the B-SX4T-R or B-SX5T-R model. Notes: Same List Ref. No. Ref. No. Description (*1) White Screw M3x4 (*2) Locking Support LCBT-3S (*3) Motor Drive Harness (*4) Cleaner (*5) Cable Bush OLBT-13 A: B-4205-QM B: B-4205-QM-R

29 31 ROTARY CUTTER MODULE (B-8204-QM) (Revision Date: Mar. 2, 2005) SMW-4x6* SMW-3x12 SMW-4x6 SMW-4x6* SMW-4x6* SMW-3x8** SMW-3x6 D-3x6 SMW-4x6 SMW-4x6 A SMW-3x6 SMW-3x8** A 31-1

30 31. ROTARY CUTTER MODULE 1 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description Remarks A B C D E F G H I J K 31-1 FMEC Cutter Paper Guide C R GFM Cutter Unit 1 0 E G Cutter Unit Added: 1/' FMBB Paper Guide A White Screw M-3x4 (*1) 1 0 A 7FM White Screw M-3x4 (*1) Added: 1/' FMBB Paper Guide B Cable Clamp K-103G (*2) 1 1 F R Changed:10/' DDA Ferrite Bead SFC D Ferrite Bead SFC-4 R Added: 1/' FMCB Motor Drive Harness (*3) R 1 1 E 31-9 FMBC Rotary Cutter PC Board Ass'y (Service No. B ) 1 0 E 7FM Rotary Cutter PC Board Ass'y (Service No. B ) Added: 1/' FMEC Rotary Cutter Guide Plate C 1 1 FMEC Changed: 1/'05 7FM Rotary Cutter Frame B Changed:3/' FMEC Rotary Cutter Guide Plate B 1 1 7FM Rotary Cutter Frame A Changed:3/' FMEC Rotary Cutter PC Board Cover 1 0 FMEC R Corrected: 6/2003 FMEC Rotary Cutter PC Board Cover Added: 1/' FMCD Cutter Cover R 1 0 E FMCD Cutter Cover Added: 1/' HDA Cover Holding Screw TL-233 No A F Cover Holding Screw TL R Added: 1/' HZC Speed Nut TM F Speed Nut TM R Added: 1/' FMEB Cutter Support Plate A R 1 0 FMEB Cutter Support Plate A Added: 1/' FMCC Main Frame R 1 0 FMCC Main Frame Added: 1/' FMEB Cutter Support Plate R 1 0 FMEB Cutter Support Plate Added: 1/' FMEC Rotary Cutter Frame B R 2 0 FMEC Rotary Cutter Frame B Added: 1/' FMCB Cutter Interlock Switch 1 0 E 7FM Cutter Interlock Switch Added: 1/' FMEB Switch Plate R 1 0 FMEB Switch Plate Added: 1/' FMCB Cutter Harness R 1 1 E FMCB Home Position Sensor 1 0 B 7FM Home Position Sensor Added: 1/' FMEB Release Lever R FMMB Jam Clear Label R FMEB Sensor Plate R 1 0 FMEB Sensor Plate Added: 1/' A: B-8204-QM B: B-8204-QM-R

31 31. ROTARY CUTTER MODULE 2 (Revision Date: Jan. 23, 2006) Ref. No. Part No. Description Remarks A B C D E F G H I J K FMEC Cutter Paper Guide D R FDB Locking Support LCBT-3S Deleted:3/' FMCB Cutter DRV Harness B R 1 1 E HAA Set Screw M-4x6 (*4) 2 0 A 7FM Set Screw M-4x6 (*4) Added: 1/' ZBA Trigger Solenoid 1 0 D FMQB Cleaner (*5) R 1 1 A F Cable Bush OLBT-13 R FMBC B-SX Cutter Paper Guide C Accessory 1 1 Added: 10/' FDB Spacer PS-303 Added: 1/' NOTE: B-8204-QM is exclusively for the B-SX4T, SP40II, or B-SX5T series. B-8204-QM-R is exclusively for the B-SX4T-R or B-SX5T-R model. NOTE: Same in this List Ref. No. Ref. No. Description (*1) White Screw M3x4 (*2) Cable Clamp K-103G (*3) Motor Drive Harness (*4) Set Screw M4x6 (*5) Cleaner A: B-8204-QM B: B-8204-QM-R

32 32 OTHER OPTIONAL KITS (Revision Date: Jan. 23, 2006) PCMCIA PC Board (B-9700-PCM-QM/B-9700-PCM-QM-R) 1 SMW-3x6 Expansion I/O PC Board (B-7704-IO-QM/B-7704-IO-QM-R) Built-in LAN PC Board (B-9700-LAN-QM/B-9700-LAN-QM-R) 5 SMW-3x6 USB PC Board (B-9700-USB-QM/B-9700-USB-QM-R) 6 SMW-3x6 Fanfold Paper Guide (B-4905-FF-QM/B-4905-FF-QM-R)

33 32. OTHER OPTIONAL KITS 1 (Revision Date: Jun. 7, 2006) Ref. No. Part No. Description RoHS Remarks A B C D E F G H I J K L B-9700-PCM-QM/B-9700-PCM-QM-R PCMCIA PC Board FM PCMCIA PC Board Ass'y E PCMCIA2 PC Board Ass'y B-7704-IO-QM/B-7704-IO-QM-R Expansion I/O PC Board 32-2 FMBC EXPIO PC Board Ass'y (NOTE 1) E EXPIO PC Board Ass'y R (NOTE 1) FMCB EXPIO Harness E FMCB EXPIO Harness FDB Locking Support WLS F Locking Support WLS-16-0 R B-9700-LAN-QM/B-9700-LAN-QM-R Built-in LAN PC Board FM LAN PC Board Ass'y E LAN2 PC Board Ass'y B-9700-USB-QM/B-9700-USB-QM-R USB PC Board FM USB PC Board Ass'y (NOTE 2) E USB2 PC Board Ass'y B-4905-FF-QM/B-4905-FF-QM-R Fanfold Paper Guide Fanfold Paper Guide Fanfold Paper Guide R NOTES: 1. The EXPIO PC Board Ass'y (Ref. No. 3-2) is included as a standard part of the B-SX5T series. However, this is the optional equipment for the B-SX4T series. If you would like to purchase this PC Board Ass'y, please order from the Sales Department of TOSHIBA TEC CORPORATION Headquaters. 2. The USB PC Board Ass'y (Ref. No. 2-48) is included as a standard part of the B-SX4T-GS10-QQ-CCS series. However, this is the optional equipment for the B-SX4T and B-SX5T series. If you would like to purchase this PC Board Ass'y, please order from the Sales Department of TOSHIBA TEC CORPORATION Headquarters. 3. B-9700-PCM-QM, B-7704-IO-QM, B-9700-LAN-QM, B-9700-USB-QM, and B-4905-FF-QM are exclusively for the B-SX4T, SP40II, or B-SX5T model. B-9700-PCM-QM-R, B-7704-IO-QM-R, B-9700-LAN-QM-R, B-9700-USB-QM-R, and B-4905-FF-QM-R are exclusively for the B-SX4T-R or B-SX5T-R model. A: 4T-GS10/20-QP B: 4T-GS10/20-QQ C: 5T-TS12/22-QP D: 5T-TS12/22-QQ E: 4T-GS10-QQ-CCS F: 4T-GS10/20-QQ-US G: 5T-TS12/22-QQ-US H: 4T-GS10/20-CN I: 5T-TS12/22-CN J: SP40II K: 4T-GS20-QM-R L: 5T-TS22-QM-R

34 33 RFID MODULE (B-9704-RFID-U1-US/EU, B-9704-RFID-H1-QM) (Revision Date: May 26, 2006) B-9704-RFID-U1-US/EU PT-3x6 SMW-3x6*** SMW-3x6* PT-3x6 SMW-3x6** SMW-3x6* PT-3x6 SMW-3x6*** SMW-3x6** 14 B-9704-RFID-H1-QM PT-3x6 SMW-3x6*** SMW-2x

35 33. RFID MODULE 1 (Revision Date: May 26, 2006) Ref. No. Part No. Description RoHS Remarks A B C D FM Antenna Ass'y E FM Antenna Ass'y E 33-3 E RFID Flexible Cable E E Changed: 9/' FM RFID PC Board Ass'y E FM RFID Interface Cable E 33-6 F Cable Clamp CKN F Bush OLBT FM RFID Interface Cable E 33-9 F Nylon Washer PA6/W F Spacer C FM Antenna Cover Added: 5/' FM Antenna Panel Added: 5/' FM Antenna Frame Added: 5/' FM Ribbon Guide Added: 5/' FM RFID Module Frame Added: 5/' G RFID Module EU Added: 5/' E RFID Module US Added: 5/' E FM RFID Module Cover Added: 5/' FM CE Sticker Added: 5/' FCC Sticker Added: 5/' A: B-9704-RFID-U1-US B: B-9704-RFID-U1-EU C: B-9704-RFID-H1-QM