APPLICATIONS General low power DC/DC and LDO Entertainment / Infotainment systems Height restricted design
|
|
|
- Καλλίστρατος Διαμαντόπουλος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 FEATURES General purpose SMT chip tantalum series 17 case sizes available, standard and low profile down to 1mm maximum height CV range: μF / V J-lead construction APPLICATIONS General low power DC/DC and LDO Entertainment / Infotainment systems Height restricted design LEAD-FREE COMPATIBLE COMPONENT MARKING A, B, C, D, E, F, H, K, S, T, U, V, W, X, Y CASE Polarity Band (Anode+) P, R CASE Polarity Band (Anode+) HOW TO ORDER TAJ LOGO XXXXX C 227 A J Capacitance Value in pf 227 = 220µF Rated Voltage Code A = 10V ID Code Capacitance Value in pf 106 = 10µF Rated Voltage Code J = 6.3V 106 STANDARD CASE DIMENSIONS: millimeters (inches) Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W 1 ±0.20 A+0.30 (0.012) Code Metric (0.008) (0.004) (0.004) (0.008) (0.008) S Min. A (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) B (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) C (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) D (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) E (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) U (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173) V (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173) LOW PROFILE CASE DIMENSIONS: millimeters (inches) Code EIA EIA L±0.20 W+0.20 (0.008) W H 1 ±0.20 A+0.30 (0.012) Code Metric (0.008) (0.004) (0.008) (0.008) S Min. F (0.236) 3.20 (0.126) 2.00 (0.079) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) H (0.138) 2.80 (0.110) 1.50 (0.059) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) K (0.126) 1.60 (0.063) 1.00 (0.039) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) P (0.081) 1.35 (0.053) 1.50 (0.059) 1.00 ±0.10 (0.039±0.004) 0.50 (0.020) 0.85 (0.033) R (0.081) 1.30 (0.051) 1.20 (0.047) 1.00 ±0.10 (0.039±0.004) 0.50 (0.020) 0.85 (0.033) S (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) T (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) W (0.236) 3.20 (0.126) 1.50 (0.059) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) X (0.287) 4.30 (0.169) 1.50 (0.059) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Y (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) M W 1 dimension applies to the termination width for A dimensional area only. W 1 dimension applies to the termination width for A dimensional area only. 035 R NJ Type Case Size See table above Capacitance Code pf code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) Tolerance K = ±10% M = ±20% TECHNICAL SPECIFICATIONS Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel A = Gold Plating 7" Reel B = Gold Plating 13" Reel H = Tin Lead 7" Reel K = Tin Lead 13" Reel H, K = Non RoHS A, B, H, K = please contact manufacturer Specification Suffix NJ = Standard Suffix Additional characters may be added for special requirements V = Dry pack Option (selected ratings only) Technical Data: All technical data relate to an ambient temperature of +25 C Capacitance Range: 0.10 μf to 2200 μf Capacitance Tolerance: ±10%; ±20% Rated Voltage (V R ) +85 C: Category Voltage (V C ) +125 C: Surge Voltage (V S ) +85 C: Surge Voltage (V S ) +125 C: Temperature Range: -55 C to +125 C Reliability: 1% per 1000 hours at 85 C, V R with 0.1Ω/V series impedance, 60% confidence level Qualification: CECC issue 2 EIA 535BAAC for standard case sizes Termination Finished: Sn Plating (standard), Gold and SnPb Plating upon request For AEC-Q200 availability, please contact
2 STANDARD TANTALUMS CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated voltage DC (V R ) to 85 C μf Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) A A A A/B A A/B A A/B A A/B A/B/C A A A/B A/B/C A A A A/B A/B/C A A A A/B A/B/C B/C/D A A A/B A/B A/B A/B/C B/C/D A A A/B A/B A/B/C B/C C/D A A A/B A/B A/B/C A/B/C B/C/D C/D A A/B A/B A/B/C A/B/C B/C C/D C/D A A/B A/B/C A/B/C B/C B/C/D C/D/E D/E/V A/B A/B A/B/C A/B/C B/C/D C/D C/D D/E/V A A/B/C A/B/C B/C/D B/C/D C/D D/E V A A/B A/B/C A/B/C/D B/C/D C/D C/D/E D/E/V A A/B A/B/C/D B/C/D C/D C/D/E D/E E/V A A/B/C B/C/D B/C/D C/D C (M) /D/E D/E/V V A/B A/B/C B/C/D B/C/D/E C/D/E D/E/V E/V B B/C B (M) /C/D C/D/E D/E/V E/V V (M) B/D B/C/D C/D/E C/D/E E/V D C/D/E C/D/E D/E/V E (M) C/D C/D/E D/E/V E/U/V C/D/E D/E D/E/V E (M) /V (M) D (M) /E D/E/V E (M) /V (M) D/E/V (M) E/V (M) V (M) LOW PROFILE TANTALUMS CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated voltage DC (V R ) to 85 C μf Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) R/S R/S S R/S R R/S S R/S R R/S P/R/S R/S R R/S P/R (M) /S/T R/S R/S R/S/T S/T R/S R/S/T R/S P/S/T R/S R/S/T R/S/T P/R/S P/S/T W R/S R/S R/S P/R/S/T P/S/T T W R/S R/S R/S R/S/T P/R/S/T T T W R/S R/S R/S/T R/S/T T T/W W Y R R/S R/S/T R/S/T K/P/S/T T T/W W X/Y R R/S/T R/S/T P/R/S/T S/T T W Y Y R/S R/S/T P/R/S/T K/P/R (M) /S/T T/W W W X/Y R R/S/T K/P/R/S/T S/T/W T (M) /W W Y Y P/R K/P/R/S/T K/P (M) /S/T/W T/W W W/Y F/Y Y K/P/S K/P (M) /S/T/W T/W W W/Y X/Y Y P (M) /S T/W T/W H/W/Y W/X/Y X/Y Y T T/W W W/Y F/X/Y Y T/W T (M) /W W/Y W/X/Y F (M) /Y T (M) /W W/Y W/X/Y F/X (M) /Y Y (M) W/Y W/X/Y F/X/Y Y W (M) /Y F/X/Y Y F/Y Y Y Y Y (M) Y (M) Not recommended for new designs; higher voltage or smaller case size alternatives are available. (M tolerance only) Released ratings Engineering samples - please contact Note: Voltage ratings are minimum values. reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards
3 Voltage Temperature Voltage Temperature C TAJR475*002#NJ R TAJR685*002#NJ R TAJR106*002#NJ R TAJS106*002#NJ S TAJR156*002#NJ R TAJP226*002#NJ P TAJR226*002#NJ R TAJA336*002#NJ A TAJK336*002#NJ K TAJP336*002#NJ P TAJS336*002#NJ S TAJA476*002#NJ A TAJP476M002#NJ P TAJS476*002#NJ S TAJA686*002#NJ A TAJT686*002#NJ T TAJA107*002#NJ A TAJB107*002#NJ B TAJT107*002#NJ T TAJW107*002#NJ W TAJB157*002#NJ B TAJT157M002#NJ T TAJW157*002#NJ W TAJB227*002#NJ B TAJD227*002#NJ D TAJW227*002#NJ W TAJY227*002#NJ Y ) TAJD337*002#NJ D TAJW337M002#NJ W TAJY337*002#NJ Y ) TAJC477*002#NJ C TAJD477*002#NJ D TAJF477*002#NJ F TAJY477*002#NJ Y ) TAJC687*002#NJ C TAJD687*002#NJ D TAJE687*002#NJ E ) TAJY687*002#NJ Y ) TAJD108M002#NJ D TAJE108*002#NJ E ) TAJY108M002#NJ Y ) TAJD158*002#NJ D TAJE158*002#NJ E ) TAJV158M002#NJ V ) TAJV228M002#NJ V ) 4 85 C TAJR225*004#NJ R TAJS225*004#NJ S TAJR335*004#NJ R TAJS335*004#NJ S TAJR475*004#NJ R TAJS475*004#NJ S TAJR685*004#NJ R TAJS685*004#NJ S TAJT685*004#NJ T TAJR106*004#NJ R TAJS106*004#NJ S TAJT106*004#NJ T TAJR156*004#NJ R TAJS156*004#NJ S TAJT156*004#NJ T TAJK226*004#NJ K TAJP226*004#NJ P TAJR226*004#NJ R TAJS226*004#NJ S TAJT226*004#NJ T TAJA336*004#NJ A TAJK336*004#NJ K TAJP336M004#NJ P TAJS336*004#NJ S
4 Voltage Temperature Voltage Temperature TAJT336*004#NJ T TAJW336*004#NJ W TAJA476*004#NJ A TAJT476*004#NJ T TAJW476*004#NJ W TAJA686*004#NJ A TAJB686*004#NJ B TAJT686*004#NJ T TAJW686*004#NJ W TAJA107*004#NJ A TAJB107*004#NJ B TAJT107M004#NJ T TAJW107*004#NJ W TAJB157*004#NJ B TAJC157*004#NJ C TAJW157*004#NJ W TAJY157*004#NJ Y ) TAJB227*004#NJ B TAJC227*004#NJ C TAJD227*004#NJ D TAJW227*004#NJ W TAJX227*004#NJ X ) TAJY227*004#NJ Y ) TAJC337*004#NJ C TAJD337*004#NJ D TAJF337*004#NJ F TAJX337*004#NJ X ) TAJY337*004#NJ Y ) TAJC477*004#NJ C TAJD477*004#NJ D TAJE477*004#NJ E ) TAJY477*004#NJ Y ) TAJD687*004#NJ D TAJE687*004#NJ E ) TAJY687M004#NJ Y ) TAJD108*004#NJ D TAJE108*004#NJ E ) TAJV108*004#NJ V ) TAJE158*004#NJ E ) TAJV158M004#NJ V ) C TAJR155*006#NJ R TAJS155*006#NJ S TAJR225*006#NJ R TAJS225*006#NJ S TAJR335*006#NJ R TAJS335*006#NJ S TAJR475*006#NJ R TAJS475*006#NJ S TAJT475*006#NJ T TAJR685*006#NJ R TAJS685*006#NJ S TAJT685*006#NJ T TAJA106*006#NJ A TAJP106*006#NJ P TAJR106*006#NJ R TAJS106*006#NJ S TAJT106*006#NJ T TAJA156*006#NJ A TAJK156*006#NJ K TAJP156*006#NJ P TAJR156*006#NJ R TAJS156*006#NJ S TAJT156*006#NJ T TAJA226*006#NJ A TAJK226*006#NJ K TAJP226M006#NJ P TAJS226*006#NJ S TAJT226*006#NJ T TAJW226*006#NJ W TAJA336*006#NJ A
5 --- Voltage Temperature Voltage Temperature TAJT336*006#NJ T TAJW336*006#NJ W TAJA476*006#NJ A TAJB476*006#NJ B TAJC476*006#NJ C TAJT476*006#NJ T TAJW476*006#NJ W TAJB686*006#NJ B TAJC686*006#NJ C TAJW686*006#NJ W TAJB107*006#NJ B TAJC107*006#NJ C TAJW107*006#NJ W TAJY107*006#NJ Y ) TAJB157M006#NJ B TAJC157*006#NJ C TAJD157*006#NJ D TAJW157*006#NJ W TAJX157*006#NJ X ) TAJY157*006#NJ Y ) TAJC227*006#NJ C TAJD227*006#NJ D TAJE227*006#NJ E ) TAJF227*006#NJ F TAJX227*006#NJ X ) TAJY227*006#NJ Y ) TAJC337*006#NJ C TAJD337*006#NJ D TAJE337*006#NJ E ) TAJY337*006#NJ Y ) TAJD477*006#NJ D TAJE477*006#NJ E ) TAJV477*006#NJ V ) TAJY477*006#NJ Y ) TAJD687*006#NJV D TAJE687*006#NJ E ) TAJV687*006#NJ V ) TAJE108M006#NJ E ) TAJV108M006#NJ V ) C TAJR105*010#NJ R TAJS105*010#NJ S TAJR155*010#NJ R TAJS155*010#NJ S TAJR225*010#NJ R TAJS225*010#NJ S TAJR335*010#NJ R TAJS335*010#NJ S TAJT335*010#NJ T TAJA475*010#NJ A TAJR475*010#NJ R TAJS475*010#NJ S TAJT475*010#NJ T TAJA685*010#NJ A TAJP685*010#NJ P TAJR685*010#NJ R TAJS685*010#NJ S TAJT685*010#NJ T TAJA106*010#NJ A TAJK106*010#NJ K TAJP106*010#NJ P TAJR106M010#NJ R TAJS106*010#NJ S TAJT106*010#NJ T TAJA156*010#NJ A TAJB156*010#NJ B TAJS156*010#NJ S TAJT156*010#NJ T TAJW156*010#NJ W TAJA226*010#NJ A TAJB226*010#NJ B
6 Voltage Temperature Voltage Temperature TAJT226*010#NJ T TAJW226*010#NJ W TAJA336*010#NJ A TAJB336*010#NJ B TAJC336*010#NJ C TAJW336*010#NJ W TAJB476*010#NJ B TAJC476*010#NJ C TAJH476*006#NJ H TAJW476*010#NJ W TAJY476*010#NJ Y ) TAJB686*010#NJ B TAJC686*010#NJ C TAJW686*010#NJ W TAJY686*010#NJ Y ) TAJB107*010#NJ B TAJC107*010#NJ C TAJD107*010#NJ D TAJW107*010#NJ W TAJX107*010#NJ X ) TAJY107*010#NJ Y ) TAJC157*010#NJ C TAJD157*010#NJ D TAJE157*010#NJ E ) TAJF157*010#NJ F TAJX157M010#NJ X ) TAJY157*010#NJ Y ) TAJC227*010#NJ C TAJD227*010#NJ D TAJE227*010#NJ E ) TAJY227*010#NJ Y ) TAJD337*010#NJ D TAJE337*010#NJ E ) TAJV337*010#NJ V ) TAJE477*010#NJ E ) TAJU477*010RNJ U ) TAJV477*010#NJ V ) TAJE687M010#NJV E TAJV687M010#NJV V C TAJR684*016#NJ R TAJS684*016#NJ S TAJR105*016#NJ R TAJS105*016#NJ S TAJT105*016#NJ T TAJR155*016#NJ R TAJS155*016#NJ S TAJA225*016#NJ A TAJR225*016#NJ R TAJS225*016#NJ S TAJT225*016#NJ T TAJA335*016#NJ A TAJB335*016#NJ B TAJR335*016#NJ R TAJS335*016#NJ S TAJT335*016#NJ T TAJA475*016#NJ A TAJB475*016#NJ B TAJK475*016#NJ K TAJP475*016#NJ P TAJS475*016#NJ S TAJT475*016#NJ T TAJA685*016#NJ A TAJB685*016#NJ B TAJS685*016#NJ S TAJT685*016#NJ T TAJA106*016#NJ A TAJB106*016#NJ B TAJC106*016#NJ C TAJT106*016#NJ T TAJW106*016#NJ W
7 Voltage Temperature Voltage Temperature TAJA156*016#NJ A TAJB156*016#NJ B TAJC156*016#NJ C TAJT156M016#NJ T TAJW156*016#NJ W TAJB226*016#NJ B TAJC226*016#NJ C TAJD226*016#NJ D TAJW226*016#NJ W TAJB336*016#NJ B TAJC336*016#NJ C TAJD336*016#NJ D TAJW336*016#NJ W TAJY336*016#NJ Y ) TAJC476*016#NJ C TAJD476*016#NJ D TAJW476*016#NJ W TAJX476*016#NJ X ) TAJY476*016#NJ Y ) TAJC686*016#NJ C TAJD686*016#NJ D TAJF686*016#NJ F TAJX686*016#NJ X ) TAJY686*016#NJ Y ) TAJC107*016#NJ C TAJD107*016#NJ D TAJE107*016#NJ E ) TAJF107M016#NJ F TAJY107*016#NJ Y ) TAJD157*016#NJ D TAJE157*016#NJ E ) TAJV157*016#NJ V ) TAJY157M016#NJ Y ) TAJE227*016#NJ E ) TAJV227*016#NJ V ) TAJE337M016#NJ E ) C TAJR104*020#NJ R TAJS104*020#NJ S TAJR154*020#NJ R TAJS154*020#NJ S TAJR224*020#NJ R TAJS224*020#NJ S TAJR334*020#NJ R TAJS334*020#NJ S TAJR474*020#NJ R TAJS474*020#NJ S TAJR684*020#NJ R TAJS684*020#NJ S TAJT684*020#NJ T TAJA105*020#NJ A TAJR105*020#NJ R TAJS105*020#NJ S TAJT105*020#NJ T TAJA155*020#NJ A TAJP155*020#NJ P TAJR155*020#NJ R TAJS155*020#NJ S TAJT155*020#NJ T TAJA225*020#NJ A TAJB225*020#NJ B TAJP225*020#NJ P TAJR225*020#NJ R TAJS225*020#NJ S TAJT225*020#NJ T TAJA335*020#NJ A TAJB335*020#NJ B TAJT335*020#NJ T TAJA475*020#NJ A TAJB475*020#NJ B TAJT475*020#NJ T
8 Voltage Temperature Voltage Temperature TAJA685*020#NJ A TAJB685*020#NJ B TAJC685*020#NJ C TAJT685*020#NJ T TAJB106*020#NJ B TAJC106*020#NJ C TAJW106*020#NJ W TAJB156*020#NJ B TAJC156*020#NJ C TAJW156*020#NJ W TAJB226*020#NJ B TAJC226*020#NJ C TAJD226*020#NJ D TAJW226*020#NJ W TAJY226*020#NJ Y ) TAJC336*020#NJ C TAJD336*020#NJ D TAJX336*020#NJ X ) TAJY336*020#NJ Y ) TAJC476*020#NJ C TAJD476*020#NJ D TAJE476*020#NJ E ) TAJX476*020#NJ X ) TAJY476*020#NJ Y ) TAJC686M020#NJ C TAJD686*020#NJ D TAJE686*020#NJ E ) TAJY686*020#NJ Y ) TAJD107*020#NJ D TAJE107*020#NJ E ) TAJV107*020#NJ V ) TAJE157*020#NJ E ) TAJV157*020#NJ V ) C TAJR154*025#NJ R TAJR224*025#NJ R TAJR334*025#NJ R TAJA474*025#NJ A TAJR474*025#NJ R TAJS474*025#NJ S TAJA684*025#NJ A TAJR684*025#NJ R TAJS684*025#NJ S TAJA105*025#NJ A TAJP105*025#NJ P TAJR105*025#NJ R TAJS105*025#NJ S TAJA155*025#NJ A TAJB155*025#NJ B TAJP155*025#NJ P TAJS155*025#NJ S TAJT155*025#NJ T TAJA225*025#NJ A TAJB225*025#NJ B TAJT225*025#NJ T TAJA335*025#NJ A TAJB335*025#NJ B TAJT335*025#NJ T TAJW335*025#NJ W TAJA475*025#NJ A TAJB475*025#NJ B TAJT475*025#NJ T TAJW475*025#NJ W TAJB685*025#NJ B TAJC685*025#NJ C TAJW685*025#NJ W TAJB106*025#NJ B TAJC106*025#NJ C TAJD106*025#NJ D TAJW106*025#NJ W TAJC156*025#NJ C
9 Voltage Temperature Voltage Temperature TAJD156*025#NJ D TAJY156*025#NJ Y ) TAJC226*025#NJ C TAJD226*025#NJ D TAJF226*025#NJ F TAJY226*025#NJ Y ) TAJC336*025#NJ C TAJD336*025#NJ D TAJE336*025#NJ E ) TAJY336*025#NJ Y ) TAJD476*025#NJ D TAJE476*025#NJ E ) TAJY476*025#NJ Y ) TAJD686*025#NJ D TAJE686*025#NJ E ) TAJV686*025#NJ V ) TAJE107*025#NJ E ) TAJV107*025#NJ V ) TAJV157M025#NJ V ) C TAJA104*035#NJ A TAJR104*035#NJ R TAJS104*035#NJ S TAJA154*035#NJ A TAJR154*035#NJ R TAJS154*035#NJ S TAJA224*035#NJ A TAJR224*035#NJ R TAJS224*035#NJ S TAJA334*035#NJ A TAJR334*035#NJ R TAJS334*035#NJ S TAJA474*035#NJ A TAJB474*035#NJ B TAJR474*035#NJ R TAJS474*035#NJ S TAJT474*035#NJ T TAJA684*035#NJ A TAJB684*035#NJ B TAJP684*035#NJ P TAJS684*035#NJ S TAJT684*035#NJ T TAJA105*035#NJ A TAJB105*035#NJ B TAJP105*035#NJ P TAJS105*035#NJ S TAJT105*035#NJ T TAJA155*035#NJ A TAJB155*035#NJ B TAJC155*035#NJ C TAJT155*035#NJ T TAJA225*035#NJ A TAJB225*035#NJ B TAJC225*035#NJ C TAJT225*035#NJ T TAJB335*035#NJ B TAJC335*035#NJ C TAJW335*035#NJ W TAJB475*035#NJ B TAJC475*035#NJ C TAJD475*035#NJ D TAJW475*035#NJ W TAJC685*035#NJ C TAJD685*035#NJ D TAJY685*035#NJ Y ) TAJC106*035#NJ C TAJD106*035#NJ D TAJE106*035#NJ E ) TAJX106*035#NJ X ) TAJY106*035#NJ Y ) TAJC156*035#NJ C
10 Voltage Temperature Voltage Temperature TAJD156*035#NJ D TAJY156*035#NJ Y ) TAJD226*035#NJ D TAJE226*035#NJ E ) TAJY226*035#NJ Y ) TAJD336*035#NJ D TAJE336*035#NJ E ) TAJV336*035#NJ V ) TAJE476*035#NJ E ) TAJV476*035#NJ V ) TAJV686*035#NJ V ) C TAJA104*050#NJ A TAJS104*050#NJ S TAJA154*050#NJ A TAJB154*050#NJ B TAJS154*050#NJ S TAJA224*050#NJ A TAJB224*050#NJ B TAJP224*050#NJ P TAJR224*050#NJ R TAJS224*050#NJ S TAJA334*050#NJ A TAJB334*050#NJ B TAJP334*050#NJ P TAJR334M050#NJ R TAJS334*050#NJ S TAJT334*050#NJ T TAJA474*050#NJ A TAJB474*050#NJ B TAJC474*050#NJ C TAJS474*050#NJ S TAJT474*050#NJ T TAJA684*050#NJ A TAJB684*050#NJ B TAJC684*050#NJ C TAJA105*050#NJ A TAJB105*050#NJ B TAJC105*050#NJ C TAJW105*050#NJ W TAJB155*050#NJ B TAJC155*050#NJ C TAJD155*050#NJ D TAJW155*050#NJ W TAJB225*050#NJ B TAJC225*050#NJ C TAJD225*050#NJ D TAJW225*050#NJ W TAJC335*050#NJ C TAJD335*050#NJ D TAJY335*050#NJ Y ) TAJC475*050#NJ C TAJD475*050#NJ D TAJX475*050#NJV X TAJY475*050#NJ Y ) TAJC685*050#NJ C TAJD685*050#NJ D TAJY685*050#NJ Y ) TAJD106*050#NJ D TAJE106*050#NJ E ) TAJV106*050#NJ V ) TAJD156*050#NJ D TAJE156*050#NJ E ) TAJV156*050#NJ V ) TAJV226*050#NJ V ) 1 1) Dry pack option (see How to order) is recommended for reduction of stress during soldering. Dry pack parts should be treated as 3. Moisture Sensitivity Level () is defined according to J-STD-020. All technical data relates to an ambient temperature of +25 C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 261. NOTE: reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards
11 QUALIFICATION TABLE TEST Endurance *Initial Limit Humidity Temperature Stability Surge Voltage Condition Apply rated voltage (Ur) at 85ºC and / or category voltage (Uc) at 125ºC for 2000 hours through a circuit impedance of 0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step Temperature C Duration(min) Apply 1.3x category voltage (Uc) at 125ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω TAJ series (Temperature range -55ºC to +125ºC) Characteristics Visual examination DCL ΔC/C DF Visual examination DCL ΔC/C DF no visible damage 1.25 x initial limit within ±10% of initial value initial limit no visible damage initial limit within ±10% of initial value 1.2 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* ΔC/C n/a +0/-10% ±5% +10/-0% +12/-0% ±5% DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* Visual examination DCL ΔC/C DF no visible damage initial limit within ±5% of initial value initial limit
12 SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO2 F93 BE Low DCL
APPLICATIONS General low power DC/DC and LDO Entertainment / Infotainment systems Height restricted design
FEATURES General purpose SMT chip tantalum series 17 case sizes available, standard and low profile down to 1mm maximum height CV range: 0.10-2200μF / 2.5-50V J-lead construction APPLICATIONS General low
APPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches)
Low FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.15-1500μF / 2.5-50V 14 case sizes available Power supply applications APPLICATIONS General medium power DC/DC convertors
CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Item Performance Test condition (IEC ) Operating temperature 55ºC + 105ºC. Rated temperature + 105ºC. Range 3.3 μ F 1,000 μ F 120Hz
Low ESR / RoHS Compliant PS/L series is the standard product of NeoCapacitor TM. PS/L series can provide space-saving solution and low ESR. Performance Characteristics Item Performance Test condition (IEC
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
ALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
High Voltage Thick Film Chip Resistor. RCV Series. Features. Applications. Construction
High Voltage Thick Film Chip Resistor High Voltage Thick Film Chip Resistor Features Highly reliable multilayer electrode construction High component and equipment reliability Excellent performance at
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR
+105 C Tubular Axial Lead Aluminum Capacitors 601D Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR General Specifications- Operating Temperature: -55 to +105 C Voltage
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Ferrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES