MF-R Series - PTC Resettable Fuses
|
|
|
- Σέργιος Μελετόπουλος
- 8 χρόνια πριν
- Προβολές:
Transcript
1 *RoHS OMPLINT & **HLOGN FR Features Radial Leaded evices ured, flame retardant eoxy olymer insulating material meets UL 94V-0 requirements RoHS comliant* and alogen free** gency recognition: lications lmost anywere tere is a low voltage ower suly and a load to be rotected, including: omuters & erierals General electronics utomotive alications MF-R Series - PT Resettable Fuses lectrical aracteristics Model V Volts I ms Iold Itri Initial Resistance Oms Hour (R ) Post-Tri Resistance Oms Max. Time to Tri meres Seconds Tried Power issiation meres at at at at at Watts at Hold Tri Min. Max. Max. Ty. MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R *** MF-R ***Tested at 40 ams nvironmental aracteristics Oerating/Storage Temerature to +85 Maximum evice Surface Temerature in Tried State... 5 Passive ging , 000 ours...±5 % tyical resistance cange Humidity ging , 85 % R.H. 000 ours...±5 % tyical resistance cange Termal Sock to +85, 0 times...±0 % tyical resistance cange Solvent Resistance... MIL-ST-0, Metod 5...No cange Vibration... MIL-ST-88, Metod 007.,...No cange ondition Test Procedures nd Requirements For Model MF-R Series Test Test onditions ccet/reject riteria Visual/Mec.... Verify dimensions and materials...per MF ysical descrition Resistance... In still R Rmax Time to Tri... 5 times Iold, Vmax,...T time to tri (seconds) Hold urrent... 0 min. at Iold...No tri Tri ycle Life... Vmax, Imax, 00 cycles...no arcing or burning Tri ndurance... Vmax, 48 ours...no arcing or burning UL File Number TÜV File Number... R057 * RoHS irective 00/95/ Jan. 7, 00 including annex and RoHS Recast 0/65/U June 8, 0. ** ourns follows te revailing defi nition of alogen free in te industry. ourns considers a roduct to be alogen free if (a) te romine (r) content is 900 m or less; (b) te lorine (l) content is 900 m or less; and (c) te total romine (r) and lorine (l) content is 500 m or less. Secifi cations are subject to cange witout notice. Te device caracteristics and arameters in tis data seet can and do vary in different alications and actual device erformance may vary over time. Users sould verify actual device erformance in teir secific alications.
2 dditional Features ulk ackaging, tae and reel and mmo-pak available on most models MF-R Series - PT Resettable Fuses Product imensions (see next age for outline drawing) Model Pysical aracteristics Max. Max. Nom. Tol. ± Min. Max. Style Lead ia. Material MF-R (0.5) (0.7) (0.0) (0.08) (0.99) (0.) (0.06) Sn/Niu MF-R (0.9) (0.5) (0.0) (0.08) (0.99) (0.) (0.00) Sn/Niu MF-R (0.9) (0.5) (0.0) (0.08) (0.99) (0.) (0.00) Fe MF-R (0.9) (0.5) (0.0) (0.08) (0.99) (0.) (0.00) Fe MF-R (0.9) (0.5) (0.0) (0.08) (0.99) (0.) (0.00) Fe MF-R (0.9) (0.58) (0.0) (0.08) (0.99) (0.) (0.00) Fe MF-R (0.9) (0.59) (0.0) (0.08) (0.99) (0.) (0.00) Fe MF-R (0.) (0.59) (0.0) (0.08) (0.99) (0.) (0.00) MF-R (0.8) (0.598) (0.0) (0.08) (0.99) (0.) (0.00) MF-R (0.409) (0.60) (0.0) (0.08) (0.99) (0.) (0.00) MF-R (0.46) (0.657) (0.0) (0.08) (0.99) (0.) (0.00) MF-R (0.9) (0.480) (0.0) (0.08) (0.99) (0.8) (0.00) Fe MF-R (0.50) (0.55) (0.0) (0.08) (0.99) (0.8) (0.00) MF-R (0.50) (0.744) (0.0) (0.08) (0.99) (0.8) (0.00) MF-R (0.40) (0.66) (0.0) (0.08) (0.99) (0.8) (0.00) MF-R (0.47) (0.74) (0.0) (0.08) (0.99) (0.8) (0.00) MF-R (0.47) (0.70) (0.0) (0.08) (0.99) (0.8) (0.0) MF-R (0.47) (0.70) (0.0) (0.08) (0.99) (0.8) (0.00) Fe MF-R (0.47) (0.70) (0.0) (0.08) (0.99) (0.8) (0.0) MF-R (0.567) (0.976) (0.0) (0.08) (0.99) (0.8) (0.0) MF-R (0.685) (0.980) (0.40) (0.08) (0.99) (0.8) (0.0) MF-R (0.760) (.56) (0.40) (0.08) (0.99) (0.8) (0.0) MF-R (0.870) (.7) (0.40) (0.08) (0.99) (0.8) (0.0) MF-R (0.95) (.95) (0.40) (0.08) (0.99) (0.8) (0.0) MF-R (0.95) (.95) (0.40) (0.08) (0.99) (0.8) (0.0) MF-R (0.95) (.95) (0.40) (0.08) (0.99) (0.8) (0.0) Packaging otions: ULK: ll models = 500 cs. er bag TP & RL: MF-R005-MF-R60.7 mm device itc = 000 cs. er reel MF-R85-MF-R mm device itc = 500 cs. er reel MF-R500~MF-R mm device itc = 000 cs. er reel MMO-PK: MF-R005-MF-R60.7 mm device itc = 000 cs. er ack MF-R85-MF-R mm device itc = 000 cs. er ack MF-R500~MF-R mm device itc = 500 cs. er ack (6WG) (4WG) 0.8 (0WG) IMNSIONS: MM (INHS) Secifi cations are subject to cange witout notice. Te device caracteristics and arameters in tis data seet can and do vary in different alications and actual device erformance may vary over time. Users sould verify actual device erformance in teir secific alications.
3 MF-R Series - PT Resettable Fuses Product imensions (see revious age for dimensions) Style Style Style Style 4 NOT: Kinked lead otion is available for board standoff. ontact factory for details. NOT: lso available wit straigt leads. ontact factory for details. Termal erating art - Iold / Itri (ms) Model mbient Oerating Temerature -40 º -0 º 0 º º 40 º 50 º 60 º 70 º 85 º MF-R / / / / / / / / / 0.05 MF-R / / / / / / / / / 0.08 MF-R / / / / / / / / / 0.4 MF-R00 0. / / / / / / / / / 0.6 MF-R / / / / / / / / / 0.0 MF-R / / / / / / / / / 0.4 MF-R / / / / / / / / / 0. MF-R / / / / / / / / / 0.40 MF-R065.0 / / / / / / / / / 0.5 MF-R075.6 /..0 / / / / / / / / 0.60 MF-R /.80. / / / / / / / / 0.7 MF-R /.80. / / / / / / / / 0.7 MF-R0.60 /.0.4 /.86.7 /.54.0 / / / / / /.4 MF-R5.96 /.9.76 /.5.55 /.0.5 /.70. /.4.04 / / / /.40 MF-R60. / / / /.0. /.66. / / / /.66 MF-R85.68 / / 4.8. / / /.08.4 /.84.6 /.5. / /.9 MF-R50.6 / / / / / / /.40.5 /.06.0 /.60 MF-R / / / / / / /.40.5 /.06.0 /.60 MF-R / / / / / / / / /. MF-R / / / / / / / / / 4.6 MF-R / / / / / / / / / 5.0 MF-R / / / / / / / / 7.. / 6.4 MF-R / / / / / / / / / 7.8 MF-R800.6 /. 0.4 / / / /. 6.6 / / / / 8. MF-R900.0 / 6..7 /.4 0. / / / /.7 6. / / / 9.6 MF-R00 6. / / 9.. / 6..0 / / / / / / 0.4 Secifi cations are subject to cange witout notice. Te device caracteristics and arameters in tis data seet can and do vary in different alications and actual device erformance may vary over time. Users sould verify actual device erformance in teir secific alications.
4 MF-R Series - PT Resettable Fuses Tyical Time to Tri at º Time to tri (Seconds) MF-R005 MF-R00 MF-R07 MF-R00 MF-R05 MF-R00 MF-R050 MF-R065 MF-R075 MF-R090 MF-R Fault urrent (ms) -0-9 MF-R0 MF-R5 MF-R090 MF-R60 MF-R85 MF-R50, MF-R00 MF-R400 MF-R600 MF-R700 MF-R800 MF-R900 MF-R500 MF-R00 How to Order MF - R Multifuse Product esignator Series R = Radial Leaded omonent Hold urrent, Iold (0.05 ms -.0 ms) Packaging Otions - = ulk Packaging witout art number suffi x otion = ulk Packaging wit art number suffi x otion - = Tae and Reel witout art number suffi x otion* = Tae and Reel wit art number suffi x otion - P = mmo-pak* = Kinked leads were straigt leads are standard = Straigt leads were kinked leads are standard Part Number Suffi x Otion - 99 = s of date code ril, 005 all MF-R models are RoHS comliant. Te suffi x -99 can be used if a new art number is required to reference te RoHS comliance. xamles: MF-R0...ulk ackaging MF-R ulk ackaging wit art number MF-R0-...Tae and reel ackaging MF-R Tae and reel ackaging wit art number MF-R ulk ackaging wit art number MF-R ulk ackaging wit art number *Packaged er I486- Time to tri (Seconds) Fault urrent (ms) Tyical Part Marking: MF-R005 - R05 Reresents total content. Layout may vary. PRT INTIFITION MNUFTURR'S TRMRK MF-R SRIS, RV., 08/5 Secifi cations are subject to cange witout notice. Te device caracteristics and arameters in tis data seet can and do vary in different alications and actual device erformance may vary over time. Users sould verify actual device erformance in teir secific alications T O: WK OF 000 = 0 (YR & WK) WK 7 OF 000 = 0 (WK & YR) Tyical Part Marking: MF-R00 - R00 Reresents total content. Layout may vary. PRT INTIFITION T O (FIRST IGIT = LST IGIT OF YR; NXT THR IGITS = Y OF YR) R50 080T MNUFTURR'S TRMRK LOT NO. (T = TIWN S = HIN)
5 MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/7 Series Tae and Reel Secifications evices taed using I468 /I86- standards. See table below and Figures and for details. I I imensions imension escrition Mark Mark imensions Tolerance 8-0.5/+.0 arrier tae widt W W (.709) (-0.0/+.09) Hold down tae widt W 0 W 4 min. (.4) Hold down tae No rotrusion To distance between tae edges W W 6 (.8) 9-0.5/+0.75 Srocket ole osition W W 5 (.54) (-0.0/+0.0) 4 ±0. Srocket ole diameter 0 0 (.57) (±.0078) bscissa to lane (straigt lead) H H 8.5 ±.0 (.78) (±.8) 6 ±0.5 bscissa to lane (kinked lead) H 0 H 0 (.6) (±.0) bscissa to to (straigt lead) H H 8.0 (.496) bscissa to to (kinked lead) H H. (.68) 55.0 Overall widt w/lead rotrusion (straigt lead) (.65) 4. Overall widt w/lead rotrusion (kinked lead) (.7) 54.0 Overall widt w/o lead rotrusion (straigt lead) (.6) 4.5 Overall widt w/o lead rotrusion (kinked lead) (.67).0 Lead rotrusion I L (.09) Protrusion of cutout L L (.4) Protrusion beyond old-down tae I I Not secified Srocket ole itc P 0 P 0 Pitc tolerance evice itc: MF-R005 MF-R60, MF-R/90, evice itc: MF-R85 MF-R400, MF-R/600, MF-RX0 MF-RX75 MF-RX0/7 MF-RX75/7 Tae tickness t t.7 ±0. (0.5) (±.0) 0 consecutive ± (±.09).7 ±0. (0.5) (±.0) 5.4 ±0.6 (.0) (±.04) Tae tickness wit slice: MF-R00 MF-R60, t.5 MF-RX0/7 MF-RX85/7 (.059) Tae tickness wit slice: MF-R50 MF-R00, t. MF-RX0 MF-RX75, MF-R/90, MF-RX50/7-MF-RX75/7 (.09) Slice srocket ole alignment 0 ody lateral deviation Δ Δ 0 ody tae lane deviation Δ Δ (.05) Secifications are subject to cange witout notice. Te device caracteristics and arameters in tis data seet can and do vary in different alications and actual device erformance may vary over time. Users sould verify actual device erformance in teir secific alications. ±0. (±.0) ±.0 (±.09) ±. (±.05) IMNSIONS: MM (INHS)
6 MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/7 Series Tae and Reel Secifications I I imensions imension escrition Mark Mark imensions Tolerance Lead sacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/7 F F 5.08 ±0. (0.) (±0.008) 56.0 Reel widt w W (.05) Reel diameter d a 70.0 (4.57) Sace between flanges less device W 4.75 ±.5 (.87) (±.8) rbor ole diameter f c 6.0 ±.0 (.04) (±.47) ore diameter: MF-R, MF-RX, MF-R/90 n 80 (.5) ore diameter: MF-R/600 n 9 (.58) ox: MF-R, MF-RX, MF-R/ (.44) (4.0) (.6) nom. ox: MF-R/ (.5) (4.6) (4.5) onsecutive missing laces: MF-R, MF-RX, MF-R/90 onsecutive missing laces: MF-R/600 Reference lane mty laces er reel: MF-R, MF-RX, MF-R/90 Not secified P H H mty laces er reel: MF-R/600 F H 0. % Taed omonent imensions - Figure L W 0 H 0 W W none I I P 0 P H L 0 Reference lane F H 0 W W 0 W User direction of feed ross section - H H t I I P 0 0 User direction of feed ross section - Reel imensions - Figure t Reel f d User direction of feed Uer side Tae Lower side w Uer side Tae User Secifications are subject to cange witout notice. Te device caracteristics and arameters in tis data d direction seet can and do vary in different alications and actual device erformance may vary over time. of Users sould verify actual device erformance in teir secific alications. feed Lower side Reel IMNSIONS: MM (INHS)
MF-RX/72 Series - PTC Resettable Fuses
*RoHS COMPLINT & **HLOGEN FREE RX0 480S Features n 7 V rated n Radial leaded devices n Cured, flame retardant epoxy polymer insulating material meets UL 94 V-0 requirements n RoHS compliant* and alogen
Polymer PTC Resettable Fuse: KRT Series
Polymer PT Resettable use: KRT Series Radial Lead Type or Telecom pplications eatures 1. RoHS & Halogen-ree (H) compliant 2. Hold current ratings from 0.08 to 0.18 3. High operating voltage rating :100Vdc/250Vdc
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
PolySwitch Resettable Devices Radial-Leaded Devices
T Circuit Protection s PolySwitch radial-leaded products represent the most comprehensive and complete set of PPTC products available in the industry today: RG series for hold currents up to 14 RH series
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Current Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Current Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
SCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Trimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
XKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Unshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Packaging Chip Resistors
Packaging Chip esistors Chip esistor eel Nominal Dimensions Inches () Packaging: Chips Per EI Standard S-481 inches B C D E F G H J 1 0.16 ± 0.01 4.0 ± 0.1 0.08 ± 0.01 2.0 ± 0.1 0.16 ± 0.01 4.0 ± 0.1 0.06
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
10.16mm PITCH TERMINAL CONNECTOR 4.34(0.171) 3.5(0.138) 9.5(0.374) 19.5(0.768) 3(0.118) 7.085(0.279) 8.485(0.334) 21(0.827) 14(0.
7010 SRIS 10.16mm PITH TRMINL ONNTOR 4.345 (0.171) 3.5 (0.138) 19.5(0.768) 9.5 (0.374) 4.34(0.171) Ref. 10.585(0.417) Ref. 1.9(0.075) Ref. 2.2(0.087) ORR O 7010 160 : RoHS ompliance ontact name 160 : Receptacle
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Ferrite Chip Inductor
FTURS SURFC MOUNT CS SIZS (0402 ~ 1206) DURL MULTILYR CONSTRUCTION MGNTICLLY SHILDD TP & RL PCKGING FOR UTOMTIC INSRTION OTH FLOW ND RFLOW SOLDRL Pb-FR/RoHS COMPLINT SPCIFICTIONS Case NFI04 NFI06 NFI08
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
ZNR Transient/Surge Absorbers (Type D)
ZNR Transient/Surge Absorbers Type: Series: V Features arge withstanding surge current capability in compact sizes arge Energy andling Capability absorbing transient overvoltages in compact sizes ide range
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
NPN SILICON OSCILLATOR AND MIXER TRANSISTOR
FEATURES NPN SILICON OSCILLATOR AND MIXER TRANSISTOR LOW COST HIGH GAIN BANDWIDTH PRODUCT: ft = MHz TYP LOW COLLECTOR TO BASE TIME CONSTANT: CC r b'b = 5 ps TYP LOW FEEDBACK CAPACITANCE: CRE=.55 pf TYP
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Ferrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
RS Series Current Sensing Thick Film Chip Resistor Current Sensing Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures -Low inductance -Highly reliable multilayer electrode construction -Higher
TSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Thin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin film passivated ir resistor -Very tight tolerance down to ±0.01% -Extremely low R down to ±5 PPM/ -ide resistance range 1ohm ~ 3Meg ohm -Miniature
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
SAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
High Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Ceramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. PPD series are disc and PPL are leaded type 3. rating:12v ac ~1000V ac 4. range:0.3ω~10kω 5. Stable over a long time 6. Operating temperature range:0 ~ +60 C (V=Vmax) -25
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
MIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
CEMENT FIXED RESISTORS
Self extinguishing Excellent flame and moisture resistance Extremely small sturdy and mechanically safe Non-inductive types available for all Royal Ohm Cement Types Too low or too high ohmic values on
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit
MZ.GEV- THRU MZ.GEV-. MZ.GF SERIES MZ.GEV THRU MZ.GEV TECHHICAL SPECIFICATION FEATURES Silicon Planar Power Diodes Standard Voltage Tolerance is ±% DO- Glass Case High Reliability Weight: Approx..g DO-
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
NTC Thermistor:SCK Type
Features 1. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+150 Φ8~Φ10mm:-40~+170
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
POLY-FUSE Resettable PTCs. 1812L Series. Surface Mount > 1812L Series E183209 R50119118. Description
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
CPTC Thermistor:PS Series
Features 1. RoHS compliant Two versions available PSA versions are uncased, metallized disk for clamp-contacting PSB versions are cased 2. Voltage ratings: from 160V AC to 500V AC 3. Stable over a long
Anti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
HFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
APPLICATIONS TECHNOLOGY. Leaded Discs N.03 N.06 N.09
NC Disc hermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICAIONS ND or NE: Commerical, Industrial and Automotive Applications AEC-Q200 Qualified NV: Professional Applicationsl Alarm and temperature measurement