MVSI. Technical features. Motor shaft In treated steel alloy (Isothermic hardening) resistant to stress.
|
|
- Ευτέρπη Γούναρης
- 7 χρόνια πριν
- Προβολές:
Transcript
1 Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single-phase V, 60Hz and V, 50Hz (single-phase types are supplied without capacitor); suitable for use with an inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2, 4, 6 and 8 standard poles, 10 and 12 poles on request. Conformity with European Directives Low voltage 2006/95/EC; TEX 94/9/EC. Reference Regulations EN , IEC/EN , IEC/EN Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information, contact our technical assistance office. Range extended up to Kgf. (300 kn), with centrifugal force adjustable from 0 to 100%. Mechanical protection IP 66 according to IEC 529, EN Protection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request. Tropicalization Standard on all vibrators, with vacuum encapsulation up to gr. F 33 and 35, with drop by drop trickle system for larger sizes. mbient temperature From -20 C to +40 C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130 C (DIN ) from size 70, on request for smaller sizes. On request, thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator In all positions and therefore without restriction. Lubrication ll vibrators are lubricated in the factory and do not require further lubrication if used in normal operating conditions ( FOR LIFE lubrication). In heavy duty operating conditions periodical re-lubrication may be applied to size 35 and larger. Terminal box Large fixed electrical connections. Special shaped terminals allow to fix the power supply cable, protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to requirements of vibrating machines. Insulated windings using vacuum encapsulating up to size 35; using the drop by drop trickle system with class H resin for larger sizes. The rotor is die cast aluminium. Casing In high-tensile aluminium alloy up to size 60, in spheroidal cast iron for larger sizes. Patented shape that improves heat dispersion and lowers normal working temperature at full load. Bearing flange Constructed in cast iron (spheroidal or grey) or in aluminium with steel bearing seat. The geometry of the flange transmits the load to the casing uniformly. Bearings Custom made with particular geometry, especially designed for Italvibras, suitable to support both high radial and axial loads. Motor shaft In treated steel alloy (Isothermic hardening) resistant to stress. Eccentric weights llow continual adjustment of the centrifugal force. This adjustment is realized by a graduated scale, which expresses the centrifugal force as a percentage of the maximum centrifugal force. patented system (patent N MO ), called RS, prevents adjustment errors. Weight covers In aluminium alloy. On several sizes split covers are available, please refer to section MVSI-TS on page 14. On request stainless steel ISI 304 weight covers can be supplied. Painting Electrostatic surface treatment based on polymerised epoxy polyester powder in oven at 200 C. Tested in salt spray for 500 hours. Stainless steel protection On request, corrosion high grade protection (stainless steel micro suspensions in a polyurethanic paint) is available. Several sizes are available with different mounting bolt patterns. Please contact sales office at Italvibras. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
2 2 poles /3600 rpm Description Code Type SIZE II2D Temp. class Static moment* mm Mechanical specifications kn MVSI 3/100-S C MVSI 3/200-S C MVSI 3/300-S C MVSI 3/500-S C MVSI 3/700-S C MVSI 3/800-S C MVSI 3/1100-S C MVSI 3/1300-S08 F C MVSI 3/1500-S08 F C MVSI 3/1600-S C MVSI 3/1800-S C MVSI 3/2010-S90 F C MVSI 3/2310-S90 F C MVSI 3/3200-S02 F C MVSI 3/4000-S02 F C MVSI 3/5000-S02 F C MVSI 3/6510-S C MVSI 3/9000-S C Weight 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz Electrical specifications Max input Max. current power W I/lN 400 V 460 V 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz Single-phase MVSI 3/100-S C MVSI 3/200-S C MVSI 3/300-S C MVSI 3/500-S C V 50 Hz 115 V 60 Hz MVSI 3/700-S C MVSI 3/800-S C * Working moment = 2 x static moment. I/lN = ratio between start-up current and maximum current. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
3 2 poles /3600 rpm Type Dimensional specifications (mm) Holes Fig. B C D E øg N F H I L M N 220 V 50 Hz Capacitor (μf) MVSI 3/100-S ** M20x1,5 MVSI 3/200-S ** M20x1,5 MVSI 3/300-S M20x1,5 MVSI 3/500-S M25x1,5 115 V 60 Hz Cable entry thread Fig. MVSI 3/700-S M25x1,5 MVSI 3/800-S M25x1,5 MVSI 3/1100-S , M25x1,5 MVSI 3/1300-S , M25x1,5 MVSI 3/1500-S , M25x1,5 MVSI 3/1600-S M25x1,5 MVSI 3/1800-S M25x1,5 MVSI 3/2010-S M25x1,5 MVSI 3/2310-S M25x1,5 MVSI 3/3200-S M25x1,5 MVSI 3/4000-S M25x1,5 MVSI 3/5000-S M25x1,5 MVSI 3/6510-S M32x1,5 MVSI 3/9000-S M32x1,5 Single-phase MVSI 3/100-S ** M20x1,5 MVSI 3/200-S ** M20x1,5 MVSI 3/300-S M20x1,5 MVSI 3/500-S M25x1,5 MVSI 3/700-S M25x1,5 MVSI 3/800-S M25x1,5 ** Slot. Several sizes are available with different mounting bolt patterns. Please contact sales office at Italvibras. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
4 4 poles /1800 rpm Description Code Type SIZE II2D Temp. class Static moment* mm Mechanical specifications kn MVSI 15/35-S C MVSI 15/80-S C MVSI 15/100-S C MVSI 15/200-S C Weight 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz Electrical specifications Max input Max. current power W I/lN 400 V 460 V 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz MVSI 15/400-S C MVSI 15/550-S C MVSI 15/700-S C MVSI 15/900-S C MVSI 15/1100-S C MVSI 15/1410-S C MVSI 15/1710-S C MVSI 15/2000-S C MVSI 15/2410-S C MVSI 15/3000-S C MVSI 15/3810-S C MVSI 15/4300-S C MVSI 15/5010-S C MVSI 15/6000-S C MVSI 15/7000-S C MVSI 15/9000-S C MVSI 15/9500-S C MVSI 15/11500-S C MVSI 15/14500-S C single-phase MVSI 15/35-S C MVSI 15/80-S C MVSI 15/100-S C MVSI 15/200-S C V 50 Hz 115 V 60 Hz MVSI 15/400-S C MVSI 15/550-S C MVSI 15/700-S C * * Working moment = 2 x static moment. CS certification on request, with feeding line included. I/lN = ratio between start-up current and maximum current. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
5 4 poles /1800 rpm Type MVSI 15/35-S ** M20x1,5 MVSI 15/80-S ** M20x1,5 MVSI 15/100-S (50Hz) 235 (60Hz) ** (50Hz) 58 (60Hz) M20x1,5 MVSI 15/200-S M20x1,5 MVSI 15/400-S M25x1,5 MVSI 15/550-S M25x1,5 MVSI 15/700-S M25x1,5 MVSI 15/900-S M25x1,5 MVSI 15/1100-S M25x1,5 MVSI 15/1410-S M25x1,5 MVSI 15/1710-S M25x1,5 MVSI 15/2000-S M25x1,5 MVSI 15/2410-S M25x1,5 MVSI 15/3000-S M25x1,5 MVSI 15/3810-S M25x1,5 MVSI 15/4300-S02 Dimensional specifications (mm) Holes Fig. B C D E øg N F H I L M N 666 (50Hz) 584 (60Hz) (50Hz) 137 (60Hz) M25x1,5 MVSI 15/5010-S M32x1,5 MVSI 15/6000-S M32x1,5 MVSI 15/7000-S M32x1,5 MVSI 15/9000-S , M32x1,5 MVSI 15/9500-S02 C M32x1,5 MVSI 15/11500-S90 C M32x1,5 MVSI 15/14500-S90 C M32x1,5 220 V 50 Hz Capacitor (μf) 115 V 60 Hz Cable entry thread Fig. Fig. C single-phase MVSI 15/35-S ** M20x1,5 MVSI 15/80-S ** M20x1,5 MVSI 15/100-S (50Hz) 235 (60Hz) ** (50Hz) 58 (60Hz) M20x1,5 MVSI 15/200-S M20x1,5 MVSI 15/400-S /12 35 M25x1,5 MVSI 15/550-S /12 40/35 M25x1,5 MVSI 15/700-S /16 160/40 M25x1,5 ** Slot Start-up capacitor / Running capacitor. Several sizes are available with different mounting bolt patterns. Please contact sales office at Italvibras. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
6 6 poles /1200 rpm Description Code Type SIZE II2D Temp. class Static moment* mm Mechanical specifications kn MVSI 10/40-S C MVSI 10/100-S C MVSI 10/200-S C MVSI 10/310-S C MVSI 10/550-S C MVSI 10/650-S C MVSI 10/810-S C MVSI 10/1110-S C MVSI 10/1400-S C MVSI 10/1610-S C MVSI 10/2100-S C MVSI 10/2610-S C MVSI 10/3000-S C MVSI 10/3810-S C MVSI 10/4700-S C MVSI 10/5150-S C MVSI 10/5200-S C MVSI 10/5700-S C MVSI 10/6500-S C MVSI 10/6600-S C MVSI 10/7000-S C MVSI 10/8000-S C MVSI 10/9000-S C MVSI 10/10000-S C MVSI 10/11200-S C MVSI 10/12000-S C MVSI 10/13000-S C MVSI 10/15000-S C MVSI 10/17500-S C MVSI 10/19500-S C MVSI 10/22000-S C MVSI 10/25000-S C MVSI 10/30000-S Weight 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz Electrical specifications Max input Max. current power W I/lN 400 V 460 V 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz * Working moment = 2 x static moment. For special application. CS certification on request, with feeding line included. I/lN = ratio between start-up current and maximum current. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
7 6 poles /1200 rpm Fig. Dimensional specifications (mm) Holes Type Fig. B C D E øg N F H I L M N Cable entry thread MVSI 10/40-S M20x1,5 MVSI 10/100-S M20x1,5 MVSI 10/200-S M25x1,5 MVSI 10/310-S M25x1,5 MVSI 10/550-S M25x1,5 MVSI 10/650-S02 MVSI 10/810-S (50Hz) 435 (60Hz) (50Hz) 448 (60Hz) (50Hz) 117,5 (60Hz) M25x1,5 134 (50Hz) 108 (60Hz) M25x1,5 MVSI 10/1110-S M25x1,5 MVSI 10/1400-S M25x1,5 MVSI 10/1610-S (50Hz) 537 (60Hz) (50Hz) 137 (60Hz) M25x1,5 MVSI 10/2100-S M25x1,5 MVSI 10/2610-S M25x1,5 MVSI 10/3000-S M25x1,5 MVSI 10/3810-S M32x1,5 MVSI 10/4700-S M32x1,5 MVSI 10/5150-S M32x1,5 MVSI 10/5200-S M32x1,5 MVSI 10/5700-S M32x1,5 MVSI 10/6500-S M32x1,5 MVSI 10/6600-S02 C M32x1,5 MVSI 10/7000-S M32x1,5 MVSI 10/8000-S M32x1,5 MVSI 10/9000-S M32x1,5 MVSI 10/10000-S02 C M32x1,5 MVSI 10/11200-S02 C M32x1,5 MVSI 10/12000-S90 C M32x1,5 MVSI 10/13000-S02 C M32x1,5 MVSI 10/15000-S02 F M32x1,5 MVSI 10/17500-S02 F M32x1,5 MVSI 10/19500-S02 F M32x1,5 MVSI 10/22000-S90 F M32x1,5 MVSI 10/25000-S90 F M32x1,5 MVSI 10/30000-S02 Q M32x1,5 Fig. C Fig. F Fig. Q For special application. Several sizes are available with different mounting bolt patterns. Please contact sales office at Italvibras. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
8 8 poles - 750/900 rpm Description Code Type SIZE II2D Temp. class Static moment* mm Mechanical specifications kn MVSI 075/150-S C MVSI 075/250-S C MVSI 075/400-S C MVSI 075/530-S C MVSI 075/660-S C MVSI 075/910-S C MVSI 075/1310-S C MVSI 075/1750-S C MVSI 075/2110-S C MVSI 075/3110-S C MVSI 075/3800-S C MVSI 075/4200-S C MVSI 075/5300-S C MVSI 075/6500-S C MVSI 075/6800-S C MVSI 075/10000-S C MVSI 075/12000-S C MVSI 075/14000-S C MVSI 075/17000-S C MVSI 075/22000-S C MVSI 075/26000-S C MVSI 075/30000-S Weight 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz * Working moment = 2 x static moment. For special application. CS certification on request, with feeding line included. I/lN = ratio between start-up current and maximum current. Electrical specifications Max input Max. current power W I/lN 400 V 460 V 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
9 Fig. Dimensional specifications (mm) Holes Type Fig. B C D E øg N F H I L M N Cable entry thread MVSI 075/150-S M25x1,5 MVSI 075/250-S M25x1,5 MVSI 075/400-S M25x1,5 MVSI 075/530-S M25x1,5 MVSI 075/660-S M25x1,5 Fig. C MVSI 075/910-S M25x1,5 MVSI 075/1310-S M25x1,5 MVSI 075/1750-S M25x1,5 MVSI 075/2110-S M25x1,5 MVSI 075/3110-S M32x1,5 MVSI 075/3800-S M32x1,5 MVSI 075/4200-S M32x1,5 MVSI 075/5300-S M32x1,5 MVSI 075/6500-S M32x1,5 Fig. F MVSI 075/6800-S02 C M32x1,5 MVSI 075/10000-S02 C M32x1,5 MVSI 075/12000-S90 C M32x1,5 MVSI 075/14000-S90 F M32x1,5 MVSI 075/17000-S90 F M32x1,5 MVSI 075/22000-S90 F M32x1,5 MVSI 075/26000-S90 F M32x1,5 MVSI 075/30000-S02 Q M32x1,5 Fig. Q For special application. Several sizes are available with different mounting bolt patterns. Please contact sales office at Italvibras. Italvibras Sp - I Fiorano Modenese MO - Via Ghiarola Nuova, 22/26 - tel fax italvibras@italvibras.it -
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραLowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Διαβάστε περισσότεραSIEMENS Squirrel Cage Induction Standard Three-phase Motors
- SIEMENS Squirrel Cage Induction Standard Three-phase Motors 2 pole 3000 rpm 50Hz Rated current Power Efficiency Rated Ratio Noise Output Frame Speed Weight 3V 400V 415V factor Class 0%Load 75%Load torque
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραApplications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Διαβάστε περισσότεραLowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
Διαβάστε περισσότεραFinish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραHigh hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)
VLR/VLRI/VLR VLR Vertical multistage centrifugal pumps The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming. High hydraulic efficiency
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραHigh pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
Διαβάστε περισσότεραFDL - FXDL FBDL SERIES
FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).
Διαβάστε περισσότεραDLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραLOWARA e-nsce, e-nscs, e-nscf
End suction pumps LOWARA e-nsce, e-nscs, e-nscf Pumps made of cast iron e-nscs e-nscf e-nsce Description Specifications e-nsc normal priming pumps are designed for applications in the industrial and agricultural
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραCreative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
Διαβάστε περισσότεραVertical multistage centrifugal pumps in AISI 316 stainless steel
VLRI/X Vertical multistage centrifugal pumps in AISI 316 stainless steel The VLRI/X are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming.
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότερα7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR squirrel cage induction motors 7AACC63-100 SINGLE-PHASE MOTORS CAP START - CAP RUN Electric Motors Division WELLINGBOROUGH 7AACC63-100 EXICO LIMITED, 16
Διαβάστε περισσότεραHeat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Διαβάστε περισσότεραHSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότερα2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραSpherical Bearings Product Overview
Spherical Bearings Product Overview Table of Contents EN4613 R EN4613 S EN4614 R EN4614 S FMGB....4 FMGN....4 FMGS....4 FMGU....4 EN2584 / FRE EN2585 / FRL EN3048 EN4037 EN4038 EN4039 FRA EN2335 EN4265
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραVERTICAL MULTI-CELL CENTRIFUGAL PUMPS IN AISI 316 STAINLESS STEEL
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 NOCCHI VLRI/X HIGH HYDRAULIC EFFICIENCY, ENTIRELY IN AISI 34 STAINLESS STEEL (VLRI) OR AISI 316 (VLRX), STANDARDIZED MOTOR
Διαβάστε περισσότεραSiemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
Synchronous motors Siemens 2009 FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height n red S P red ΔT=00 K rpm kw (P) Red power Stic torque M 0 ΔT=00 K Red torque ) M red ΔT=00
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότερα50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE
F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραDC040B Series Salient Characteristics
US: +1 7 9 25 sia: +86 21 5763 58 Harleysville, P 438 DC SERO MOTORS BRUSH COMMUTTED DC MOTORS The DC4B series brush commutated DC motor is a 4 mm diameter unit offered in 6 lengths with continuous output
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότεραQUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότεραACTORS IEC CONT Ex9C
IEC CONTCTORS Ex9C Ex9C Product Overview Features C-3 contactor ratings from 630 and C-1 contactor ratings to 800 voltages from 24~600, 50/60 Hz Full Non-Reversing (FVNR) and Full Reversing (FVR) 5 k @
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραUDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Διαβάστε περισσότεραThermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότεραΑ ιθ EL. 3. Κα ασ ασ ής: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, Waldachtal, α ία. Tumlingen,
Η ΩΣΗ ΠΙ ΟΣ Ω Α ιθ. 0020 EL 1. Μο α ι ός ω ι ός α ο οί σ ς ο ύ ο ο οϊό ος: fischer η ώ α ο ώ α ύ ιο FH II, FH II-I 2. Π οβ ό - ς χ ήσ - ις : Π οϊό Α ύ ιο ιασ ο ής χό ς α ό ο ι έ η/ ς ήση/ ις ω σ έ ω σ
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραDC SERVO MOTORS Previous N23XX Series. EC057C Series Salient Characteristics
US: +1 267 933 215 Europe: +33 2 92 87 51 sia: +86 21 5763 18 Harleysville, P 438 DC SERO MOTORS BRUSHESS DC MOTORS The EC57C series brushless DC motor is a high torque density model brushless motor in
Διαβάστε περισσότεραMATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Διαβάστε περισσότεραDC SERVO MOTORS. EC057B Series Salient Characteristics E E
US: + 267 933 25 Europe: +33 2 92 87 5 sia: +86 2 5763 58 Harleysville, P 438 DC SERO MOTORS 238XXXXNC Series BRUSHESS DC MOTORS The EC57B series brushless motor is a high torque model brushless motor
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραDC054B Series Salient Characteristics
www.pittman-motors.com US: +1 7 933 25 sia: +86 57 58 Harleysville, P 4 DC SERO MOTORS BRUSH COMMUTTED DC MOTORS Previous XXX Series The DC54B series brush commutated DC motor is a 54 mm diameter unit
Διαβάστε περισσότεραDEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραHORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
Διαβάστε περισσότεραGroup 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
Διαβάστε περισσότεραPERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V
Pn kw PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 VOLTAGE Speed RPM Eff % P.F. COSΦ LRT LRA RLA BDT Noise LwdB(A) W kg J Kgm2 380 400 415 63 M1 0.18 0.53 0.50 0.48 2720 65.0 0.80 2.3 5.5 2.2 50 14.00031
Διαβάστε περισσότεραELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Διαβάστε περισσότεραKarta Katalogowa CATALOGUE CARD
2001-11-12 KK-01/02 Edycja 6 Strona 1 z 8 Karta Katalogowa CATALOGUE CARD 7UÑMID]RZHVLOQLNLLQGXNF\MQH ZLHORELHJRZH ]ZLUQLNLHPNODWNRZ\P 7KUHHSKDVHLQGXFWLRQ PXOWLSOHVSHHGPRWRUV ZLWKVTXLUUHOFDJHURWRU )$%5
Διαβάστε περισσότερα- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Διαβάστε περισσότεραIE3 IE2. 100% From Europe. Squirrel-Cage Low Voltage Motor. Premium Efficiency. High Efficiency. Made in Europe. Converter fed Motor.
Made in urope Best Choise of nergy Saving I3 Squirrel-Cage ow Voltage Motor According to IC034-30:2008 standard CNS140:2012 standard Premium fficiency I2 High fficiency rom urope Protectoin IP55,TC Insulation,
Διαβάστε περισσότερα- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραMMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραFirst Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραPPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Διαβάστε περισσότεραWestfalia Bedienungsanleitung. Nr
Westfalia Bedienungsanleitung Nr. 108230 Erich Schäfer KG Tel. 02737/5010 Seite 1/8 RATED VALUES STARTING VALUES EFF 2 MOTOR OUTPUT SPEED CURRENT MOMENT CURRENT TORQUE TYPE I A / I N M A / M N Mk/ Mn %
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραBMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
Διαβάστε περισσότεραTechnical Report. General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor
Technical Report General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor Tasos Lazaridis Electrical Engineer CAD/CAE Engineer tasoslazaridis13@gmail.com Three-Phase Induction Machine
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ
ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ ZOOM Modern LE Ds lamp of cold light with a 5X magni - fication. The intensity of light can be adjusted. Its articulated arm eases the movement
Διαβάστε περισσότεραSMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Διαβάστε περισσότεραRod End > Spherical Bearings Product Overview
Rod End > Spherical Bearings Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 FMW3E_.4 / NSA8143 Rod End > Spherical Bearings Schematic
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραBreaking capacity: ~200kA Rated voltage: ~690V, 550V. Operating I 2 t-value (A 2 s) Power
SYSTEM NV-NH NV/NH SERIES TYPES gr UQ M M, M-striker pin ~ 5V ~9V Technical data on page 8 Technical data: Application: MCUQ/5A/9V Standards: IEC 9- Breaking capacity: ~ka Rated voltage: ~9V, 55V For battery
Διαβάστε περισσότερα