SMB SERIES Subminiature Coaxial Connectors

SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors are pushed together and engaged with a retaining recess. Rapid connection and disconnection even in limited space and high packing factor. Subminiature coaxial connectors satisfy the need of the modern electronics industry for miniaturization of components and can be used in virtually all fields of electronics. 50Ω INTERFACE MATING DIMENSIONS PLUG: H I REF. PLANE ØB ØO R Q P G F ØL E ØM ØN ØA ØC ØD A 2.01 (.079) 2.06 (.081) B 3.05 (.120) 3.07 (.121) C 3.40 (.134) 3.45 (.136) D 3.73 (.147) 3.78 (.149) E ---- 1.63 (.064) F 0.29 (0.0115) 0.57 (0.0225) G 0.27 (.0105) 0.52 (.0205) H 0.10 (.0005) 0.29 (.0115) I 3.58 (.141) 3.78 (.149) J 0.64 (.025) 0.76 (.030) K ---- 0.08 (.0003) L 0.13 (.005) 0.23 (.009) M 0.56 (.0219) 0.60 (.0236) N 1.01 (.0396) 1.03 (.0404) O 0.97 (.0381) 0.99 (.0389) P ---- 1.65 (.065) Q 2.79 (.110) ---- R ---- 3.43 (.135) JACK: E F G REF. PLANE D I H 15º ØK ØL ØA ØB A 2.08 (.082) 2.16 (.085) B 3.05 (.120) 3.07 (.121) C 3.66 (.144) 3.71 (.146) D 3.48 (.137) 3.53 (.139) E 1.65 (.065) ---- F 0.17 (0.0065) 0.19 (0.0075) G 0.07 (.003) 0.13 (.005) H 0.04 (.0015) 0.24 (.0095) I 2.39 (.094) 2.72 (.107) J 2.51 (.099) 2.62 (.103) K ---- 0.25 (.010) L 0.48 (.019) 0.53 (.021) M 0.97 (.0381) 0.99 (.0389) ØM ØC J 41

75Ω STANDARD INTERFACE MATING DIMENSIONS PLUG: F D C REF. PLANE A --- 3.302 (.130) B --- 1.625 (.064) C --- 0.177 (.007) D 0.178 (.007) 0.939 (.037) ØA E 2.972 (.117) --- F 3.582 (.141) --- E B JACK: J I REF. PLANE K A --- 0.254 (.010) B 3.328 (.131) --- C --- 6.197 (.244) D 0.483 (.019) 0.533 (.021) ØC ØB ØD ØA E 0.254 (.010) --- F 1.321 (.052) --- G --- 2.971 (.117) H H 0 (.000) --- E F I --- 0.177 (.007) G J 3.328 (.131) 3.581 (.141) K 1.65 (.065) --- NOTES 1. THIS SERIES IS ALSO CALLED SMZ. 42

75Ω MINI INTERFACE MATING DIMENSIONS PLUG: A C D REF PLANE B A 2.971(.117) --- B --- 2.260 (.089) C --- 1.143 (.045) D 0.178 (.007) 0.685 (.027) JACK: D E REF PLANE F A 0.356 (.014) 0.381 (.015) B 2.083 (.082) 2.337 (.092) ØB ØA ØC C --- 3.708 (.146) D --- 2.971 (.117) E 2.184 (.086) --- F 2.286 (.090) --- 43

TECHNICAL DATA Electrical Data 50Ω 75Ω STANDARD & MINI Cable Dielectric Diameter 0.86(.034) 1.5(.059) 0.86(.034) 1.5(.059) Dielectric Withstanding Voltage(At Sea Level, In V Rms,50hz) 750 1000 750 1000 Working Voltage (At Sea Level, In V Rms,50hz) 250 335 250 335 Impedance 50Ω 75Ω Frequency Range DC up to 4GHz Insulation Resistance 10000MΩ Contact Resistance Lnner Conductor 6mΩ Contact Resistance Outer Conductor 1mΩ Mechanical Data (For 50Ω ;75Ω Standard & 75Ω MINI ) Disengagement Force Contact Captivation Durability( matings) Engagement Force Between 1.8 and 14.2 lbs 4 lbs 500 Between 1.8 and 14.2 lbs Environmental Data (For 50Ω ;75Ω Standard & 75Ω MINI ) Temperature Range Thermal Shock -65 C +165 C MIL-STD-202,Method 107,Condition B Moisture Resistance MIL-STD-202,Method 106 Corrosion MIL-STD-202, Method 101, Condition B VSWR (50Ω ) Frequency Range Cable Type 1GHz 3GHz 4GHz 1.15 1.35 1.35 RG316 1.15 1.35 1.35 RG55, RG142, RG223, RG400 Typical VSWR for Straight Connectors 1.15 1.35 1.35 RG58 1.15 1.35 1.35 RG174, RG188, RG316 1.15 1.35 1.35 RG178, RG196 1.15 1.35 1.35 Semi-rigid.085 1.15 1.35 1.35 Semi-rigid.141 1.15 1.3 1.3 RG316 1.15 1.3 1.3 RG55, RG142, RG223, RG400 Typical VSWR for Right Angle Connectors 1.15 1.3 1.3 RG58 1.15 1.3 1.3 RG174, RG188, RG316 1.15 1.3 1.3 RG178, RG196 1.15 1.3 1.3 Semi-rigid.085 1.15 1.3 1.3 Semi-rigid.141 44

ø6.35 ø3.1 (ø.122) ø4.4 (ø.173) ø6.35 ø2.3 (ø.091) 3 (ø.118) ø6.35 ø2.35 (ø.093) 21.6 (.850) 16 (.630) 16 (.630) Figure 1 Figure 2 Figure 3 1.6 MAX. (.063MAX.) 7 (.276) 8 HEX (.315 HEX) 1/4-36UNEF-2A 8.8 1.5 (.346) 16 (.059) (.630) ø8.5 (ø.335) 15.7 (.618) 14.25 (.561) ø3.1 (ø.122) ø4.4 (ø.173) 1 (.565) 12.45 (.490) Figure 4 Figure 5 Figure 6 13.25 (.522) 1 (.565) ø6.35 12.45 (.490) 13.25 (.522) L Figure 7 Figure 8 Figure 9 PART NUMBER Fig. Measurements M.H. Weight Material Suitable Cables Remarks PLUG CRIMP 3100-0058 1 4.22g C1 RG58, JBY195 3100W-0058 1 C2 RG58, JBY195 3100-0142 1 3.98g C1 RG55, RG142, RG142-E, RG400 3100W-0142 1 C2 RG55, RG142, RG142-E, RG400 3100W-0223 1 C2 RG223 3100-0223 1 3.98g C1 RG223 3100-0178 2 1.92g C1 RG178, RG178-FEP, RG196 3100-0179 3 =1.65 (.065) 2.12g C1 RG179, RG179-FEP 75ohm, Mini Interface 3100-0316 3 =1.6 (.063) 2.12g B1 RG174, RG188, RG316, RG316-E, RG316-FEP 3100D-0316 3 =1.6 (.063) 2.00g B1 RD316, RG316D-E, RD316-FEP For Double Braided 316 PLUG CRIMP FOR BULKHEAD 3105-0178 4 =1.4 (.055) =2.80 (.110) 99 1.82g C1 RG178,RG178-FEP,RG196 3105-0316 4 =1.55 (.061) =2.35 (.093) 99 2.78g C1 RG174,RG188,RG316,RG316-E,RG316-FEP PLUG CRIMP RIGHT ANGLE 3100-9058 5 4.38g C1 RG58, JBY195 3100W-9058 5 C2 RG58, JBY195 3100-9142 5 4.72g C1 RG55,RG142,RG142-E,RG400 3100W-9142 5 C2 RG55,RG142,RG142-E,RG400 3100-9223 5 C1 RG223 3100W-9223 5 C2 RG223 3100-9178 6 =1.0 (.039) =1.80 (.071) 3.22g B1 RG178, RG178-FEP,RG196 3100-9179 6 =1.65 (.065) =2.35 (.093) 3.04g B1 RG179,RG179-FEP 75 ohm Mini Interface 3100-9316 6 =1.6 (.063) =2.35 (.093) 3.28g B1 RG174,RG188,RG316,RG316-E,RG316-FEP 3100W-9316 6 =1.6 (.063) =2.35 (.093) 3.04g B2 RG174,RG188,RG316,RG316-E,RG316-FEP 3100D-9316 6 =1.6 (.063) =2.35 (.093) 3.10g B1 RD316,RG316D-E,RD316-FEP For Double Braided 316 3100A-9178 7 =1.0 (.039) =1.80 (.071) 2.92g B1 RG178,RG178-FEP, RG196 3100A-9316 7 =1.6 (.063) =2.35 (.093) 2.92g B1 RG174,RG188,RG316,RG316-E,RG316-FEP 3100AD-9316 7 =1.6 (.063) =2.35 (.093) 2.76g B1 RD316,RG316D-E,RD316-FEP For Double Braided 316 PLUG CLAMP RIGHT ANGLE 3200-9316 8 3.83g B1 RG174,RG188,RG316,RG316-E,RG316-FEP PLUG SOLDER 3300-0085 9 L=13.1(.516) =2.3 (.091) 1.70 g C1 Semi-rigid.085 =3.2 (.126) 3300-0141 9 L=15.8(.622) =3.65 (.144) =4.8 (.189) 1.78g C1 Semi-rigid.0141 45 1/4-36UNS-2B M.H 99

ø3.1 (ø.122) ø4.4 (ø.173) Ø6.35 (Ø.250) 20.1 (.791) Ø2.3 (Ø.091) Ø2.75 (Ø.108) Ø3.5 (Ø.138) 8.3 (.327) 4 (.157) 14.1 (.555) ø2.9 (ø.114) ø3.9 (ø.154) 6.35 (.250) L 9.05 (.356) Figure 1 Figure 2 Figure 3 13.25 (.522) ø2.3 (ø.091) ø3.2 (ø.126) 16.5 (.650) Ø2.3 (Ø.091) 0.5 3.94 1.01 4.08 (.020) (.155) (.040) (.161) 8.5 S.Q. 12.3 9.05 (.335 S.Q.) (.484) (.356) 11.45 (.451) Figure 4 Figure 5 Figure 6 Ø3.2 (Ø.126) ø6.35 ø0.95 ø6.35 ø0.95 14.7 (.579) ø0.95 ø6.5 (ø.256) 0.5 4 S.Q. 1.02 4.06 (.020) (.157) (.200 S.Q.) 3.35 0.5 3.94 (.040) (.160) 6.1 19.8 13.1 (.132) (.020)(.155) (.240) (.516) 13 (.780) (.512) Figure 7 Figure 8 Figure 9 0.8 (.031) ø2.3 (ø.090) ø3 (ø.118) Ød 2.35 (.093) 22.1 (.870) 13.4 (.528) Figure 10 Figure 11 Figure 12 15.9 (.626) PART NUMBER Fig. Measurements M.H. Weight Material Suitable Cables Remarks PLUG SOLDER 3375-0085J 1 2.99g B1 75Ω Semi-rigid.085 Impedance=75ohm; 75ohm mini Interface PLUG SOLDER RIGHT ANGLE 3100G-9316 2 2.33g B17 RG174,RG188,RG316, RG316-E,RG316-FEP 3300-9085 3 L=1 (.565) =2.3 (.091) =3.2 (.126) 2.70g B1 Semi-rigid.085 3300-9141 3 L=15.7 (.618) =3.65 (.144) =4.8 (.189) 3.05g C1 Semi-rigid.141 3300A-9085 4 2.52g B1 Semi-rigid.085 3375-9085 5 5.48g B1 75Ω Semi-rigid.085 Impedance=75ohm; 75ohm mini Interface PLUG P.C.B MOUNT 3400-0000 6 47 1.42g B1 3400B-0000 7 47 B1 PLUG P.C.B MOUNT RIGHT ANGLE 3400-9000 8 47 3.46g B1 3400-9075 8 47 4.06g B1 75ohm mini Interface 6400-9000 8 47 A1 Reverse Polarity Plug PLUG TERMINATOR 3900-0006 9 3.15g C1 2W Average; VSWR 1.2 up to 4GHz JACK CRIMP 8100-0058 10 3.1g A1 RG58, JBY195 8100-0142 10 2.91g A1 RG55, RG142, RG142-E, RG400 8100-0223 10 3.52g A1 RG223 8100-0178 11 1.84g A1 RG178, RG178-FEP, RG196 8100-0179 12 Ød=1.65 (.065) 1.68g A1 RG179,RG179-FEP 75ohm Mini Interface 8100-0316 12 Ød=1.6 (.063) 1.66g A1 RG174,RG188,RG316, RG316-E,RG316-FEP 8100D-0316 12 Ød=1.6 (.063) 1.48g A1 RD316,RG316D-E,RD316-FEP For Double Braided 316.5X4 (ø.059x4) MH47 46

13.8 (.543) 12.85 (.506) Figure 1 ø2.35 (ø.093) (.23) 11 (.433) Figure 2 2 17.5 (.079) (.689) 2.0 MAX. (.079 MAX.) ø6.5 (ø.256) 19.9 (.783) 12 (.472) 5.9 (.232) 2.0 MAX. (.079 MAX.).8 (ø.071).6 (ø.063) ø2.35 (ø.093) 1.65 (.065) 7.15 12.45 15.9 (.284) (.490) (.626) Figure 3 Figure 4 8.33 (.328) 2.2 (ø.480) ø2.36x2 (ø.093x2) 4.75 (.187) ø2.3 (ø.091) ø3.5 (ø.138) ø3.65 (ø.144) ø4.8 (ø.189) 13.7 (.539) 16.5 (.650) Figure 5 Figure 6 (.23) 11 (.433) L Figure 7 1.9 MAX. (.075 MAX.) L1 ø6.5 (ø.256) 4.5 (.177) Ø4.9 (Ø.193) ø4.9 (ø.193) ø4.85 (ø.191) ø2.36x2 (ø.093x2) M.H 1 M.H 94 M.H 9 4.165 (.164) 8.33 (.328) PART NUMBER Fig. Measurements M.H. Weight Material Suitable Cables Remarks JACK CRIMP RIGHT ANGLE 8100-9179 1 =1.65 (.065) 3.75g A1 RG179,RG179-FEP 75 ohm Mini Interface 8100-9316 1 =1.6 (.063) A1 RG174,RG188,RG316,RG316-E,RG316-FEP 8100D-9316 1 =1.6 (.063) 2.72g A1 RD316,RG316D-E,RD316-FEP JACK CRIMP FOR BULKHEAD 8105-0178 2 =2.3 (.091) =3 (.118) 1 1.40g A1 RG178,RG178-FEP,RG196 8105-0179 2 =1.65 (.065) =2.35 (.093) 1 1.72g A1 RG179,RG179-FEP 75ohm Mini Interface 8105-0316 2 =1.6 (.063) =2.35 (.093) 1 1.72g A1 RG174,RG188,RG316,RG316-E,RG316-FEP 8105D-0316 2 =1.6 (.063) =2.35 (.093) 1 1.59g A1 RD316,RG316D-E,RD316-FEP For Double Braided 316 JACK CRIMP FOR BULKHEAD RIGHT ANGLE 8105-9178 3 94 3.07g A1 RG178,RG178-FEP,RG196 JACK CRIMP FOR PANEL RECEPTACLE 8126-0316 4 9 1.67g 1 RG174,RG188,RG316,RG316-E,RG316-FEP JACK SOLDER 8300-0085 5 1.36g A1 Semi-rigid.085 8300-0141 6 1.84g A1 Semi-rigid.141 JACK SOLDER FOR BULKHEAD 8305-0085 7 L=15.3 (.602) L1= 2.0 (.079) 1 1.36g A1 Semi-rigid.085 =2.30 (.091) =3.5 (.137) 8305-0141 7 L=16.5 (.650) L1= 3.2 (.126) =3.65 (.144) =4.8 (.189) 1 1.65g A1 Semi-rigid.141 47

ø0.93 0 +0.0-0.2 1.01 (.040) 0.5 (.020) 11.95 (.470) 3.94 (.155) Figure 1 ø0.93 4.06 (.160) 0.5 (.020) 11.95 (.470) 3.94 (.155) Figure 2 0.5 (.020) Ø0.93 (Ø.037) 4.08 (.160) 1.01 (.040) 0.8 (.031) 6.51 1.5 (.256) 0.5 3.94 4.3 (.059) (.020) (.155) (.232) 8 2.41 11.95 6.7 SQ. (.315) (.095) (.470) 10.41 (.410) Figure 3 Figure 4 4.4 (.173) 5.7 (.224) 6.7 SQ. (.264 SQ.) 0.5 (.020) ø0.93 1.01 (.040) ø0.95 1.01 (.040) 5.8 (.228) 11.5 (.453) 0.5 3.94 3.9 4.08 (.020) (.155) (.154) (.160) 21.3 7 S.Q. (.839) (.276 S.Q.) Figure 5 Figure 6 4.08 (.161) ø0.5 (ø.020) 0.5 (.020) 5.2 (.205) 5.5 1.4 6.5 1.02 3.81 4.8 (.150) (.217) (.055) (.189) (.256) (.040) 12.85 6 8.8 6.35 S.Q. (.506) (.236) (.346) (.250 S.Q.) Figure 7 Figure 8.5X4 (ø.059x4).5x4 (ø.059x4) ø0.9 (ø.035).5x4 (ø.059x4) 0.21 1.2 0.21 (.008) (.047) (.008).7+0.1-0.0 (ø.067+.004-.000) 3±0.05 (.118±.002) 3±0.05 (.118±.002) Pattern and signal are on the same side Thickness of PCB: 1.6mm The material of PCB: Er=4.8 1 (.039) 0.63 0.63 (.025) (.025) Ø1.57 +0.1-0.0 +.004 (Ø.062 -.000) 4xØ1.5 (4xØ.059) 3±0.05 (.118±.002) 3±0.05 (.118±.002) Pattern and signal are on the same side Thickness of PCB: 1.6mm The material of PCB: Er=4.8.5X4 (ø.059)x4.1 (ø.043) Ø1 (Ø.039) (.100) M.H 47 M.H 48 M.H 127 M.H 127A M.H 95 M.H 142 Ø1 (Ø.039) (.100) PART NUMBER Fig. Measurements M.H. Weight Material Remarks JACK P.C.B MOUNT 8400-0000 1 =0.93 (.037) 47 0.82g A1 8475-0000 1 =0.83 (.033) 48 0.77g A1 75ohm Mini Interface 84RE-0000 2 d=0.93(.037) 127 A1 8475-SH00 2 d=0.51(.020) 127A 0.78g B1 Impedance=75 ohm ; 75 ohm Mini Interface 84CE-0000 3 95 0.77g A1 8402-0000 4 142 0.71g A1 84NG-0000 5 95 0.96g A1 8400L-0000 6 47 3.85g A1 8400S-0000 7 46 0.66g A1 Gold Plated Brass JACK P.C.B MOUNT 8400P-0000 8 93 1.14g A1 8475P-0000 8 93 1.11g A1 75ohm Mini Interface 1.9 (.075) 3.8 (.150) 6.35 (0.25) 6.35 (0.25) 3.17 (.125) 6.1 (.240) 4.9 (.193) 5.6 0.8 (. 2 2 0 ) 7.5 (. 0 3 1 ) (. 2 9 5 ) M.H 46 M.H 93 0.2 (.008) 0.8 (.031) 48 1.1 (.043)

7.9 (.311) 13.8 (.543) ø0.95 19.91 (.784) 1.02 (.040) 14.1 (.555) ø0.51 (ø.020) 0.76 (.030) 3.35 (.132) 11.18 (.440) 5.56 (.219) 5.56 (.2.19) 2.4 MAX. (.094 MAX.) 13 (.512) 3.94 (.155) Figure 1 Ø6.3 (Ø.248) Ø0.97 (Ø.038) 4.06 (.160) 6.1 (.240) 6.35 HEX. (.250 HEX.) 1.02SQ. x4 (.040SQ. x4) 3.35 3.94 (.132) (.155) 20.53 (.808) 13 (.512) Figure 2.27 (ø.050) 4.32 (.170) 5.84 (.230) 7 S.Q. (.276 S.Q.) 4.5 1.7 1.02 4.06 3.94 3.94 (.177) (.067) (.040) (.040) (.155)(.155) 11.05 6.35 S.Q. 9.7 7 S.Q. (.435) (.250 S.Q.) (.382) (.276 S.Q.) Figure 3 Figure 4 3.4 MAX. (.134 MAX.) 6.35 HEX (.250 HEX) 2.6 MAX. (.102 MAX.) 11.2 1.6 4.7 (.441) (.063)(.185) 17.5 (.689) 1.73 (.068) 3.56 (.140) 4.58 (.180) 7.5 (.295) 9.5 (.374) ø0.78 (ø.031) 2 (ø.472) (.23) 1 (.039) 7.1 (.280) 4.6 (.181) 15 (.591) 1.6 MAX. (.063 MAX.) 2.5 (.098).5 (ø.059) ø3.1 (ø.122) (.23) Figure 5 Figure 6.5X4 (ø.059x4).5x4 (ø.059)x4 ø0.6 (ø.024) M.H 47 M.H 78 ø4.9 (ø.193) M.H 94.5X4 (ø.059)x4.1 (ø.043) (.100).5x5 (ø.051x5) M.H 95 M.H 14 (.100) PART NUMBER Fig. M.H. Weight Material Remarks JACK P.C.B MOUNT RIGHT ANGLE 8400-9000 1 47 2.82g A1 8400-9075 2 78 3.36g A1 75ohm Mini Interface JACK P.C.B MOUNT RIGHT ANGLE FOR BULKHEAD 8405-9000 3 94&95 A1 8410-9000 4 14&94 3.56g A1 JACK P.C.B MOUNT END LAUNCH 8433-0000 5 1 2.1g A1 JACK FOR BULKHEAD 8500-0000 6 1 1.10g A1 Nut Screwed On From The Rear 4.5 (.177) M.H 1 Ø4.9 (Ø.193) 49

(.23) 1.6 MAX. (.063 MAX.) 6.1 (.240) 1 (.039) 5.6 (.220) 15 (.591) 2.5 (.098).5 (ø.059) ø3.1 (ø.122) (.23) (.23 ) 1.6 MAX. (.063 MAX.) 6.1 (.240) 1 (.039) 5.6 (.220) 15 (.591) 3.3 (.130) 1 (.039) 1.5 (.059) (.23 ) Figure 1 Figure 2 2.5 MAX. (.098 HEX.) 1 4.6 (.039)(.181) 11.7 (.461) 14.25 (.561) 2.55 (.100) Ød No.10-32UNF-2A (.23) 2.4 MAX. (.094 MAX.) 1.5 5 7.5 (.059) (.197) 7.1 (.295) 14.6 (.280) (.575) Ø0.7 (Ø.028) No.10-32UNF-2A (.23) Figure 3 Figure 4 4.5 MAX. (.177 MAX.) 11 HEX (.433 HEX).5 (ø.059) ø3 (ø.118) 3/8-32 UNEF-2A 11 HEX (.433 HEX) 13.95 (549).27 (ø.050) ø4.12 (ø.162) 3 (.118) 1.6 5 12.22 (.063) (.197) (.481) 16.2 6 (.638) (ø.630) 8.3 (.327) 2.6 (.102) fig:6-1 11.7 (.461) 12.5 (.492) Figure 5 Figure 6 ø2.6 (ø.102) 5.7 (.224) 8.64 (.340) 12.7 S.Q (.500 S.Q) fig:6-2 ø2.6 (ø.102) 8.64 (.340) 4.5 (.177) Ø4.9 (Ø.193) Ø4.15 (Ø.163) N0.10-32UNF-2B ø9.4 (ø.370) ø4.2 (ø.165) 6.11 (.241) ø2.6x2 (ø.102x2) 12.22 (.481) ø4.2 (ø.165) 4.32 (.170) ø2.6x4 (ø.102x4) 4.32 (.170) 8.64 (.340) M.H 1 M.H 103 M.H 92 M.H 19 M.H 18 PART NUMBER Fig. Measurements M.H. Weight Material Remarks JACK FOR BULKHEAD 8501-0000 1 1 1.16g A1 Nut Screwed On From The Front 8501A-0000 2 1 1.12g A1 Nut Screwed On From The Front 8502-0000 3 d=1.52(.060) 103 1.15g A1 Nut Screwed On From The Rear 8503-0000 3 d=0.70(.028) 103 1.12g A1 Nut Screwed On From The Rear 8504-0000 4 1 1.25g A1 8585-0000 5 92 2.68g A1 JACK FOR PANEL RECEPTACLE RIGHT ANGLE 8620-9000 6-1 19 3.69g A1 8640-9000 6-2 18 A1 50