MAGICRON EA ENAMEL (Code No. : 273 series) Magicron EA is solid paint for top coat, with thermo setting acrylic, and melamin resin as binder and epoxy resin to increasing the cor rosion resistant. Can be used without primer surfacer. Special for electric equipment. --- Electric appliances, such at refrigerator, washing machine, air conditioner, etc. --- 1. High gloss retention. 2. Good chemical resistance. 3. High solid contents. 4. Good corrosion resistance. --- Any colour. --- 20 Ltr. --- APPLICATION METHOD Air spray or electrostatic spray. --- Magicron EA Thinner. --- THINNING RATIO 25 up to 30% by volume. --- 20 sec / NK2 cup. --- DRY FILM THICKNESS 30 35 microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE --- SETTING TIME 10 minutes. --- 150ºC x 30 mins or 160ºC x 20 mins. --- NON VOLATILE + 60% for white colour. --- + 70 KU (25ºC). --- SPECIFIC GRAVITY + 1.27 for white colour (depend each colour). --- HARDNESS H to 2H (Mitsubishi pencil). --- FINENESS Below of 10 micron. --- HIDING POWER 40 micron after dry.

KANSAI NEW CHASSIS BLACK (Code No. : 116 006) Kansai new chassis black is shyntetic paint for chassis of automobile, truck and machinary. Chassis truck. 1. Good adhesion. 2. Good water and oil resistance. 3. High flexibility. 4. Fast dry. 5. Good corrosion resistance. Any colour, full gloss, semi gloss or matt. 20 Ltr. APPLICATION METHOD Spray. Chassis Thinner THINNING RATIO 25 up to 30% by volume. 18 20 sec./nk2 cup. DRY FILM THICKNESS 20 25 microns. THEORITICAL SPREADING 9 m²/ltr/coat. RATE SET TO TOUCH 15 mins at 30 C SEMI DRY 30 mins at 30 C HARD DRY 5 hrs at 30 C NON VOLATILE MATTER 49 + 3%. 70 + 2 KU (25 C). SPECIFIC GRAVITY 0.94 + 0.03. FINENESS max 25 micron. HIDING POWER 20 micron after dry.

AMILAC NO. 2 MO ENAMEL (Code No. : 192 series) A hig grade one coat finish baking enamel based on alkyd resin and melamine resin as binder system. --- Topcoat for automobiles. --- 1. High gloss. 2. Good appearance. 3. Good outdoor durability. 4. Good chemcial resistance. 5. Good physical properties. 6. High solid content at the spray viscosity. --- Available in many solid colours. --- 20 Ltr. --- APPLICATION METHOD Air spray or electrostatic spray. --- Amilac Thinner No.2. --- THINNING RATIO Enamel : thinner = 100 : 25 30 (by weight). --- 18 20 sec/nk-2. --- DRY FILM THICKNESS 30 40 microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat RATE --- OVERCOATING INTERVAL Min. 10 minutes. --- 150 C x 30 min.c --- NON VOLATILE 55 70% (dependent on the shade of color) --- 67 + 2 KU (25 C). --- SPECIFIC GRAVITY 1,00 1,40 (dependent on the shade of color). --- PENCIL HARDNESS HB - F (Mitsubishi UNI pencil). --- FINENESS Max. 10 micron. --- HIDING POWER Max. 40 microns (except special colors).

AMILAC PRIMER SURFACER (Code No. : 198 series) Alkyd melamine paint with Epoxy as additivve to set the satisfy properties as primer surfacer. One coat primer without Red Primer with baking system. For automative assembling plant, for commercial automitive like bus, truck etc. Able to use for primer of Amilac. (melamine resin paints) 1. To increase the gloss of top coat. 2. Good adhesion to steel and top coat. 3. Flexible and tough. 4. Long protection period. Grey and others. 20 Ltr. APPLICATION METHOD Air spray or electrostatic spray. Amilac Thinner. THINNING RATIO Up to 30% by volume. 18 20 sec/nk-2. DRY FILM THICKNESS 35 45 microns. THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE SETTING TIME 10 mins before oven. 150ºC X 30 mins. NON VOLATILE 65 70%. Y 60 65 ºKU (25ºC). SPECIFIC GRAVITY 1.30 + 0.05. FINENESS 30 micron maximum.

HARDNESS H (Mitsubishi UNI pencil) AMILAC 1 M DEEP BLACK (Code No. : 191 002) Alkyd modified melamine thermosetting 1 coat 1 bake. Steel parts especially fuel tank. 1. High gloss retention. 2. Good corrosion resistance. 3. Good Adhesion. Black gloss. 20 Ltr. APPLICATION METHOD By air spray or electrostatic gun spray. Amilac Thinner. 18 20 sec/iwata NK2 cup. DRY FILM THICKNESS 30 40 microns. GLOSS 60ºC > 90 150º - 160ºC X 30 mins. NON VOLATILE 53 + 3%. 65 + 3 KU (25ºC). SPECIFIC GRAVITY 1.00 + 0.03. FINENESS 10 micron maximum. HARDNESS B - HB (Mitsubishi UNI pencil) HIDING POWER (b/w) 30 microns maximum

AMILAC NO. 2 MC ENAMEL (Code No. : 192 series) A hig grade one coat finish enamel based on alkyd resin and melamine resin and epoxy resin as binder system. For electric appliances; air conditioner, electric fan, etc. 1. High gloss. 2. Good outdoor resistance. 3. Good chemcial resistance. 4. High solid content at the spray viscosity. 5. Tough and hard. Available in many solid colours. 20 Ltr. APPLICATION METHOD Air spray or electrostatic spray. Amilac Thinner No.2. 18 20 sec/nk-2. DRY FILM THICKNESS 30 40 microns. THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE SETTING TIME Min. 10 minutes. 150ºC x 20 min. NON VOLATILE 53 65% (dependent on the shade of color) VISCOSITY Approx. 64 KU (25ºC). SPECIFIC GRAVITY 1,00 1,40 (dependent on the shade of color). HARDNESS HB - F (Mitsubishi UNI pencil) FINENESS Max. 10 micron. HIDING POWER Max. 40 microns (except special colors).

AMILAC NO. 3 ENAMEL (Code No. : 193 series) - Alkyd melamin paint for top coat with oven dry. --- 1. Steel furniture (lockers, desks, chairs, shelves, etc). 2. Commercial automotive, and machinery. --- 1. High gloss retention. 2. Can be used at low temperature baking. 3. Good weathering resistance. 4. Good chemical resistance. --- Any colour for solid colour. --- 20 Kg. --- APPLICATION METHOD Air spray or electrostatic spray. --- Amilac Thinner. --- THINNING RATIO 25 30% by weight. --- 18 22 sec/nk-2. --- DRY FILM THICKNESS Minimum 30 microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE --- SETTING TIME 7 mins before oven. --- 120ºC x 30 mins. --- NON VOLATILE 53 65% (depends on the color) --- VISCOSITY 65 + 2 KU (25ºC). --- SPECIFIC GRAVITY 1,00 1,40 (depends on the color). --- HARDNESS HB - F (Mitsubishi UNI pencil). --- FINENESS Max. 10 micron. --- HIDING POWER 40 micron maximum after dry (exception for special colour). --- GLOSS/APPEARANCE Also available semi gloss and matt.

MAGICRON ALC-2 BASE COAT / CLEAR Magicron ALC-2 is thermosetting acrylic modified melamine and epoxy resin, outstanding performance for aluminium wheel coating Top coat for aluminium wheel. 1. Good gloss retention. 2. Good chemicals resistance. 3. Good adhesion on aluminium wheel substrate. 4. Good corrosion resistance. Base coat metallic color as undercoat. Clear coat transparent as Top Coat. 20 Ltr APPLICATION METHOD Air spray or electrostatic gun spraying. Magicron ALC-2 Thinner. Base coat Thinner (295 003) Top coat Thinner (295 065) (295 010) THINNING RATIO Base Coat : 20 40%. Clear Coat : 20 30%. Base Coat : 14 16 sec/nk2--> Bake 140ºC x 20. Clear Coat : 18 20 sec/nk2 --> Bake 140ºC x 20. DRY FILM THICKNESS Base Coat : 15 20 μ. Clear Coat : 30 40 μ dft. PAINTING SYSTEM 2 coat 2 bake. 140ºC x 20 30 mins. 63 65 KU (25ºC). SPECIFIC GRAVITY 0.94 1.00 HARDNESS Min Hb

MAGICRON AL-2500 BASE COAT 2 CIB Magicron ALC-2500 is thermosetting acrylic modified melamine and epoxy resin, good adhesion performance for aluminium wheel. Base coat aluminium wheel. 1. Good applicability. 2. Good chemicals resistance. 3. Good gloss retention. Base coat metallic color as undercoat. 20 Ltr/ APPLICATION METHOD Air spray or electrostatic gun spraying. Magicron ALC-2500 Thinner (295 003). THINNING RATIO Base Coat : 30 50%. Base Coat : 13 15 sec/nk2. DRY FILM THICKNESS 15 20 μ. RECOMMEND PAINTING 2 coat 1 bake. Wet on Wet Top Coat. SYSTEM TOP COAT Magicron ALC-2 Clear. 140ºC x 20 30 mins. 60 63 KU (25ºC). SPECIFIC GRAVITY 0.94 0.98. HARDNESS Min Hb PAINTING SYSTEM 1. Primer Coat ---> Baking. 2. Magicron AL-2500 Base Coat W/W. 3. Magicron ALC-2 Clear ---> Baking. HIDING POWER Max 20 μ ( DFT) LIFE TIME Keep indoor use for 3 months. (25 C)

AQUASOL BLACK. T (Code No. : 311 004) Water based epoxyester and melamine resin paint. Dipping type under coat for automobile body frame, metal parts, etc. 1. Good resistance againts corrosive condition. 2. Excellent water and humidity resistance. 3. Touch and hard. 4. Good physical property. Black. APPLICATION METHOD Dipping THINNING RATIO Aquasol Black = 100 Aquasol Thinner = 5 Water = 5 Water. 25 + 5''/NK-2 Cup at 30ºC. DIPPING TIME 5 10''. SETTING TIME 5 minutes. 170 C x 20 min. ph 7,5 8,5. RECOMMEND OF FILM 15 20 μ/coat. THICKNESS ALLOWABLE TEMPERATURE 18 35ºC (original paint and Bath paint). NON VOLATILE IN BATH 40 + 3%. PAINT 20 ltr, 180 ltr.

MAGICRON MO METALLIC BASE 272 SERI JENIS Cat untuk warna metallic dimana cat ini berfungsi sebagai cat dasar yang membentuk metallic. Sebagai bahan dasar digunakan thermosetting acrylic resin dan melamine resin sebagai pengikat. Proses pemanasan dilakukan setelah dilapisi dengan MAGICRON MO CLEAR. PEMAKAIN Mobil. KEISTIMEWAAN - Pembentukan metalic yang baik. - Keras dan elastis. WARNA Dapat dibuat untuk semua warna metallic. KEMASAN 20 liter. CARA PEMAKAIN Umumnya dengan spray gun biasa. MAGICRON 100 = 110, 120 Perbandingan cat dengan thinner = 100 : 80 100. KEKENTALAN SPRAY 12 13 detik/nk-2. KETEBALAN LAPISAN Sesudah kering 15 20 mikron. DAYA SEBAR 1 liter 8 10 m²/lapis. WAKTU TUNGGU Sebelum di oven minimum 10 menit. WAKTU PENGERINGAN 150ºC x 30 menit. (sesudah dilapisi MAGICRON MO CLEAR) KEPADATAN CAT + 41%. KEKENTALAN CAT + 63 KU (25ºC) BERAT JENIS + 0.96 (silver metallic) DAYA TUTUP Sesudah kering 15 20 mikron. KETERANGAN Tanpa menggunakan MAGICRON MO CLEAR tidak direkomendasikan.

MAGICRON PCM ENAMEL (Code No. : 275 series) Magicron PCM is solid paint for to coat, with thermosetting acrylic and melamin resin to increasing the corrosion resistant. Can be used without primer surfacer special for electric equipment. 1. High gloss retaintion. 2. Good chemicals resistance. 3. High solid contents. 4. Good corrosion resistance. Any colour. 20 Ltr and 23 kg. APPLICATION METHOD Air spray. Magicron PCM thinner. THINNING RATIO Up to 10% by volume. 80 100 sec (Iwata NK2 Cup) DRY FILM THICKNESS 10 20 μ. Baking 220ºC + 10ºC in 60 second. NON VOLATILE MATTER + 60% for white colour. VISCOSITY + 70 KU (25ºC). SPECIFIC GRAVITY + 1.27 for white colour. HARDNESS H 2 H (Mitsubishi pencil) FINNESS Below of 10 micron. HIDING POWER 40 micron max (after dry)

MAGICRON MO CLEAR JENIS Cat lapisan luar untuk warna metallic (MAGICRON MO CLEAR BASE) dimana cat berfungsi sebagai pelindung agar pembentukan metallic tidak teroksidasi dengan udara dan juga untuk mendapatkan daya kilau yang tinggi. Sebagai bahan dasar dipergunakan resin thermosetting acrylic dan bahan pengikat melamine resin, dengan menggunakan pengeringan dengan sistim pemanasan. PEMAKAIAN Mobil. KEISTIMEWAAN - Mempertinggi daya kilau. - Memperindah permukaan metallic. - Tahan terhadap bahan kimia. - Tidak mudah menguning. - Mempunyai daya tahan cuaca yang baik. WARNA Bening. KEMASAN 20 liter. CARA PEMAKAIN Dispray. MAGICRON 200, 210 Perbandingan cat dengan thinner = 100 : 20 25. KEKENTALAN SPRAY 22 25 detik/nk-2. KETEBALAN LAPISAN Sesudah kering 30 40 mikron. DAYA SEBAR Sebelum dioven 10 menit. WAKTU PENGERINGAN 150ºC x 30 menit. KEPADATAN CAT + 50%. KEKENTALAN CAT + 60 KU (25ºC) BERAT JENIS + 0.96. KEKERASAN CAT H 2H (pincil Mitsubishi UNI)

PCM PAINT / KP ENAMEL ( Code No: 311 series ) JENIS Cat yang terbuat dari resin Polyester, Melamine dan Epoxy. KEGUNAAN Untuk precoating steel dari produk produk bangunan. SIFAT - SIFAT - Mempunyai sifat fisika yang baik. - Mempunyai ketahanan gloss yang baik. - Mempunyai ketahanan cuaca yang baik. SPEC STANDAR VISCOSITAS 80 + 10 SEC Ford Cup 4 / 25ºC. BERAT JENIS 1.25 + 0.03. PADATAN 65 + 3%. WARNA Tersedia dalam banyak warna. APPLIKASI CARA APLIKASI Barcoater No.16; Natural roll coating. PENGENCER KP Colour No. 1205 Thinner. VISCOSITAS APLIKASI 50 + 20 sec Ford Cup 4 / 25ºC. PERB PENGENCER 10 20 % by weight. TEBAL LAPISAN CAT 15 + 2 μ. WAKTU PENGERINGAN 225ºC x 60. KUALITAS LAPISAN CAT RUBBING (GOSOKAN) (60x) atau lebih. (DENGAN XYLENE) GLOSS / DAYA KILAP 85 < KEKERASAN H < (Mitsubishi Uni) ADHESI 100 / 100 ( 1 x 1 mm x 100 ) BENTURAN 50 / 500 ( cm / gram ) KEMASAN 23 Kg. TITIK NYALA 43.9ºC.

ASCA COAT 400 NC BLACK Waterborne epoxy ester paint type for interior and exterior. 1. Excellent anti corrosion performance. 2. Water soluble and fire safety. 3. Applicable in dipping system. USAGE Automobile parts excellent anti corrosion. APPLICATION Air Spray Dipping Thinner D I Water D I Water / Additive : 2/1 Thinning Ratio 10 20% 15 25% Viscosity 20ºC 60 80 sec 40 60 sec DRYING CHARACTERISTIC 20ºC 50ºC 100ºC Set to Touch 60 minutes 15 minutes - Drying Hard 5 hours 1 hours 10 minutes Baking Oven 90ºC x 20 minutes DIPPING TANK CONDITION CHECK Temperature 20-32ºC Check 2 time / day Viscosity 40 60 sec/nk2 Before production ph 9.0 + 0.5 1 time / day NV 30 + 2 1 time / d PAINT CONDITION 1. One component type 2. Color Black 3. Specific Gravity 1.15 + 0.05 4. NV 35 + 3 5. Visc. Supply (KU/25ºC) 75 + 3

PAINT PERFORMANCE SPCC SD (0.8T) Pretreatment PB # 144 Dipping for 3 minutes and after 3 day for testing. Test Item Result Thickness (μ) Baking Oven Hardness Adhesion Impact Test Humidity Resistance Salt Spray Test Alkali Resistance Oil Resistance Out Door Test 15 25 90ºC x 20 minutes F 100/100 (M-2.5) 0.5 inch x 500 gr x 30 cm 50ºC, 98% RH, 48 hrs 120 hours / max 3mm both side 0.1 N NaOH 20ºC 8 hour ( OK ) 8 hours ( OK ) immer system W-O-M 240 hours PAINT COMPARASION AQUASOL ASCA COAT (1 st ) ASCA COAT (2 nd) COMPETITOR Baking Oven 170ºC x 20 minutes 90ºC x 20 minutes 90ºC x 20 minutes - Chalking Test Max 2 months Max 6 months 6 months - Salt Spray Test 72 hours 120 hours 240 hours - ISO 14001 Enviromental Cr content Free Content Content

EVAPORATOR PAINT ( Code No: 277 001 ) Acrylic Modified Epoxy & Melamine resin 1. Electric appliances, such as refrigerator, evaporator washing machine Air Conditioner. 2. Steel furniture, such as locker, cabinet etc. 3. Building material, such as steel door etc. 1. Excellent adhesion on Aluminium Substrate. 2. Excellent flexibility properties for bending. 3. Good applicability for all kind of painting machine. Special order APPLICATION METHOD Air spray or electrostatic spray. THINNING RATIO 20 up to 30 % by volume. Evaporator Thinner. VISCOSITY SPRAY 18 + 2''/NK-2 Cup at 30ºC. DRY FILM THICKNESS 25 40 μ ( depends on color) SETTING TIME 10 minutes. 150ºC x 30 mins. NON - VOLATILE 40 60% (depends on color). 67 + 2 KU (25 C) SPECIFIC GRAVITY 1.00 ( depends on color) PENCIL HARDNESS H < ( Mitsubishi pencil ) 20 ltr

KS 720 PRIMER ( Code No: 143 xxx ) Phenol Alkyd Resin Primer. 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. Yellow and Grey. 20 kg. APPLICATION METHOD Application Method Air Spray Airless Spray Thinner Enamel No.200 Thinner Thinner Ratio 20 30 % 15 20 % Apllication viscosity 20 + 2 sec /NK-2 40 + 10 sec/nk 2 Dry Film Thickness 30 40 μ Coverage Recoat Interval 100 135 g/m² 20 min 3 month 30 mins. NON - VOLATILE 67 + 3%. SPECIFIC GRAVITY 1.50 + 0.05

RETAN PG 60 NATURAL YELLOW (Code No. : 386 164) A weather resisting Polyurethane Enamel based on acrylic polyol resin and polyisocianate hardener. A top coat finish color for industrial uses. 1. Excellent gloss and color retention. 2. Excellent durability in chemicals and marine environment. 3. Good applicability. 4. Hight build and heavy duty coatings. 5. Provides hardener, abrasion resistance. Natural Yellow, etc. 65 70 KU (25ºC) NON FOLATILE MATTER 60 + 5%. SPECIFIC GRAVITY 1.15 + 0.05. PACKING 5 ltr / set 2 packing Base / Hardener. Retan PG 60 Thinner ( 295 060 ) THINNING RATIO 40 50 % ( Volume ) air spray. 20 30 % by airless. 11 13 sec / NK2 cup. DRY FILM THICKNESS 35 μ 45 μ. SET TO TOUCH 10 minutes. SEMI DRY 4 hours. HARD DRY 6 hours 130ºC. OVERCOATING INTERVAL Over Night. TIME MIXING RATIO Base / Hardener = 4 /1 ( by volume ) POT LIFE 3 hour at 30ºC.

TEMPERATURE RESISTANCE 100ºC (dry) SUPER FTALIT (Code No. : 118 series) A finish coat based on short oil alkyd resin. 1. For construction machines. 2. For Industrial machines. 3. For transport machines. 1. Quilk dry. 2. Good weathering resistance. 3. Good physical property. Available in many colors. 78 + 3 KU (25ºC) NON FOLATILE MATTER 57 + 3 (white). SPECIFIC GRAVITY 1.20 + 0.05 (white). PACKING 20 kg. Super Ftalit Thinner ( 294 018 ) THINNING RATIO 10 30 % by Weight. 20 25 sec / NK2 cup. DRY FILM THICKNESS 30 μ 40 μ. SET TO TOUCH 15 minutes at 30 C SEMI DRY 30 minutes at 30 C HARD DRY 5 hours at 30 C OVERCOATING INTERVAL Min. 6 hours at 30ºC. Max. 7 days at 30ºC.

SKZ PRIMER (Code No. : 143 xxx) A primer coat based on modified alkyd primer with zinc chromate rust preventive pigment. 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. 1. Good rust preventive property. 2. Fast drying. 3. Good compatibility with subsequent coat e.g. Short oil alkyd resin, polyurethane resin enamel. 4. Good Applicability. Yellow, Grey and Black. 75 + 2 KU (25ºC) NON VOLATILE 71 + 3%. SPECIFIC GRAVITY 1.50 + 0.05. PACKING 25 kg. KZ Primer Thinner (294-017) THINNING RATIO 10 30 % by Weight for air spray. 20 + 2 sec / NK2 cup. DRY FILM THICKNESS 30 μ 40 μ. SET TO TOUCH 10 minutes at 30 C SEMI DRY 20 minutes at 30 C HARD DRY 2 hours at 30 C OVERCOATING INTERVAL Over 16 hours at 30ºC.

KS 720 PRIMER (Code No. : 143 xxx) Phenol Alkyd Resin Primer. 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. Yellow, Grey and Black. 82 + 2 KU (25ºC) NON VOLATILE 67 + 3%. SPECIFIC GRAVITY 1.50 + 0.05. PACKING 25 kg. KZ Primer Thinner (294-017) THINNING RATIO 20 30 % Air Spray. 15 20 % Airless Spray. 20 + 2 sec / NK2 cup Air Spray 40 + 10 sec / NK2 cup by Airless Spray DRY FILM THICKNESS 30 μ 40 μ. 30 minutes. THEORITICAL SPREADING + 5 m²/ Kg / Coat RATE OVERCOATING INTERVAL Over 1 hour. TIME

YK COAT Solid baking enamel based on special thermosetting Acrylic Rosin, crosslinked with Melamine Resin and modified with Epoxy Resin. Special designed for Zipper. 1. Good chemical Resistance. 2. Excellent Resistance to Dry Clean Chemical. 3. Good Corrosion Resistance. White & Black color, other colors are available. APPLICATION METHOD Air spray. YK Coat Thinner. PACKING 5 Ltr; 20 Ltr. THINNING RATIO 20 30 %. 18-20 sec / NK-2. DRY FILM THICKNESS 20 μ + 5 μ. BAKING CONDITION 160 C x 20 minutes. HARDNESS H 2H (Mitsubishi UNI Pencil) NON VOLATILE 58 + 2% for white color. VISCOSITY 68 + 3 KU / 25 C SPECIFIC GRAVITY 1.23 + 0.03 for white color.