Είμαστε στην ευχάριστη θέση να σας ανακοινώσουμε ότι αποτελούμε ΑΠΟΚΛΕΙΣΤΙΚΟΥΣ ΑΝΤΙΠΡΟΣΩΠΟΥΣ της εταιρίας Edison opto στην Ελλάδα και τη Κύπρο.

Σχετικά έγγραφα
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor

SPECIFICATIONS. PRODUCT NAME: AC COB15W LED module (3120) General Customer MODEL NAME: CUSTOMER P/N: DATE:

First Sensor Quad APD Data Sheet Part Description QA TO Order #

1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

LR Series Metal Alloy Low-Resistance Resistor

Precision Metal Film Fixed Resistor Axial Leaded

Transient Voltage Suppressor

LR Series Metal Alloy Low-Resistance Resistor

NPI Unshielded Power Inductors

ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013

LR(-A) Series Metal Alloy Low-Resistance Resistor

Multilayer Chip Inductor

FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012

SMD Transient Voltage Suppressors

Metal Oxide Leaded Film Resistor

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T

Thin Film Chip Inductor

Multilayer Ceramic Chip Capacitors

Metal Oxide Varistors (MOV) Data Sheet

Metal Oxide Leaded Film Resistor

Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C

ΗΛΕΚΤΡΟΝΙΚΟΣ ΚΑΤΑΛΟΓΟΣ ΠΡΟΙΟΝΤΩΝ e-catalog 2014

Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en

RoHS ASPI. Test Condition. DCR IDC Marking

Aluminum Electrolytic Capacitors (Large Can Type)

Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.

SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification

Surface Mount Aluminum Electrolytic Capacitors

YJM-L Series Chip Varistor

NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES

Strain gauge and rosettes

SMBJ SERIES. SMBG Plastic-Encapsulate Diodes. Transient Voltage Suppressor Diodes. Peak pulse current I PPM A with a 10/1000us waveform See Next Table

Multilayer Ceramic Chip Capacitors

NTC Thermistor:TSM type

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1

Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15

XKT. Metal Oxide Varistor FEATURES

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

DATA SHEET Surface mount NTC thermistors. BCcomponents

Thin Film Chip Resistors

Aluminum Electrolytic Capacitors

2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER

YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

RCS750 3-circuit square track system flexible and multifunctional

SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)

Metal Film Leaded Precision Resistor

Fixed Inductors / AL TYPE

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

ΗΛΕΚΤΡΟΝΙΚΟΣ ΚΑΤΑΛΟΓΟΣ ΠΡΟΙΟΝΤΩΝ 2014

High Current Chip Ferrite Bead MHC Series

Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead

Carbon Film Leaded Resistor

Bulletin 1489 UL489 Circuit Breakers

Metal Film Flame-Proof Resistors

Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG

38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)

Polymer PTC Resettable Fuse: KRG Series

0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance

Metal thin film chip resistor networks

Polymer PTC Resettable Fuse: KMC Series

AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM

Metal Film Leaded Precision Resistor

SMD Power Inductor-VLH

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

NPN SILICON OSCILLATOR AND MIXER TRANSISTOR

VAR Series Zinc Oxide Varistor

Dimensional Data - All tolerances (± 0.01) inches x " x.26" (Typ. 2) x " x.51" (Typ. 2)

Injection Molded Plastic Self-lubricating Bearings

RC series Thick Film Chip Resistor

THICK FILM LEAD FREE CHIP RESISTORS

± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.

S /5000 BTU/Hr. 1000/1500 Watt

Return Line Filters Type RTF10/25

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)

Thin Film Chip Inductor

SmartForm top-class lighting in a fresh, appealing design

STANDARD LED LAMPS (ROUND TYPES)

SMD Power Inductor-VLH

Πόμολα Πόρτας Door Handles

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

Series AM2DZ 2 Watt DC-DC Converter

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

NTC Thermistor:SCK Series

[1] P Q. Fig. 3.1

POWER OVER ETHERNET (PoE) MAGNETICS

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type

Data sheet Thin Film Chip Inductor AL Series

SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions

HFC SERIES High Freq. Wound Ceramic Chip Inductors

Fixed Inductors / AL TYPE

Transcript:

Η εταιρία Edison opto με έδρα τη Taiwan ιδρύθηκε το 2001 και πλέον ανταγωνίζεται στη πρώτη πεντάδα με τις μεγαλύτερες παγκοσμίως κατασκευάστριες εταιρίες module Led. Η Edison προσφέρει μια ολοκληρωμένη σειρά προϊόντων που ξεκινούν από 1 Watt έως και 150 Watt single chip - multi chip. Είμαστε στην ευχάριστη θέση να σας ανακοινώσουμε ότι αποτελούμε ΑΠΟΚΛΕΙΣΤΙΚΟΥΣ ΑΝΤΙΠΡΟΣΩΠΟΥΣ της εταιρίας Edison opto στην Ελλάδα και τη Κύπρο. 150

www.edison-opto.com.tw Solid-State Lighting Series PLCC Lightbar FPC Series Datasheet PLCC Lightbar FPC is a strip lighting module available in varying length. Its flexible circuit board not only enables novel design thinking with bendable light source, but also fers a wide range applications with dividable lighting segments. Features : High Brightness SMD LED Low Requirement & Energy Efficient Easily customized for any length Suitable for Restricted Space Typical Applications : Auditorium Walkway Lighting Stairway Accent Lighting Cabinet Lighting Specification : : Copyright 2009 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 151

Electro-Optical Characteristics (T a =25 C) LBKx-M480/x0238 Series LBKW-M480/ A0238 LBKH-M480/ D0238 LBKX-M480/ D0238 LBKR-M480/ N0238 LBKG-M480/ N0238 LBKB-M480/ N0238 LBKA-M480/ N0238 LBKY-M480/ N0238 CCT(K)/ λd(nm) Cool White 480 24 34.56 1440 120 6000K 1747 Neutral White 480 24 34.56 1440 120 4100K 1622 Warm White 480 24 34.56 1440 120 3050K 1498 Red 480 24 34.56 1440 120 620~630nm 537 Green 480 24 34.56 1440 120 520~535nm 1176 Blue 480 24 34.56 1440 120 465~475nm 346 Amber 480 24 34.56 1440 120 610~620nm 537 Yellow 480 24 34.56 1440 120 585~595nm 537 Table 2 : LBKx-M480/x0238 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. LBKx-J300/x0227 Series LBKW-J300/ A0227 LBKH-J300/ D0227 LBKX-J300/ D0227 LBKR-J300/ N0227 LBKG-J300/ N0227 LBKB-J300/ N0227 LBKA-J300/ N0227 LBKY-J300/ N0227 CCT(K)/ λd(nm) Cool White 300 12 21.60 1800 120 6000K 1092 Neutral White 300 12 21.60 1800 120 4100K 1014 Warm White 300 12 21.60 1800 120 3050K 936 Red 300 12 21.60 1800 120 620~630nm 336 Green 300 12 21.60 1800 120 520~535nm 735 Blue 300 12 21.60 1800 120 465~475nm 189 Amber 300 12 21.60 1800 120 610~620nm 336 Yellow 300 12 21.60 1800 120 585~595nm 336 Table 3 : LBKx-J300/x0227 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. ΤΙΜΗ 4 ΜΕΤΡΩΝ ΡΟΛΛΟΥ ΤΙΜΗ 5 ΜΕΤΡΩΝ ΡΟΛΛΟΥ 78,00 74,00 152

Electro-Optical Characteristics (T a =25 C) LBKx-M192 Series LBKW-M192/ A0253 LBKH-M192/ D0253 LBKX-M192/ D0253 LBKR-M192/ N0253 LBKG-M192/ N0253 LBKB-M192/ N0253 LBKA-M192/ N0253 LBKY-M192/ N0253 CCT(K)/ λd(nm) Cool White 192 24 46.08 1920 120 6000K 2083 Neutral White 192 24 46.08 1920 120 4100K 1949 Warm White 192 24 48.08 1920 120 3050K 1640 Red 192 24 46.08 1920 120 620~630nm 737 Green 192 24 48.08 1920 120 520~535nm 1465 Blue 192 24 46.08 1920 120 465~475nm 390 Amber 192 24 46.08 1920 120 610~620nm 737 Yellow 192 24 46.08 1920 120 585~595nm 737 Table 4 : LBKx-M192 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. ΤΙΜΗ 4 ΜΕΤΡΩΝ ΡΟΛΛΟΥ 134,0 0 LBKRTB-M240 Series RGB 3in1 CCT(K)/ λd(nm) LBKRTB-M240/ N0652 Red 240 24 19.20 800 120 620~630nm 288 Green 240 24 19.20 800 120 520~535nm 652 Blue 240 24 19.20 800 120 465~475nm 192 172,0 0 Table 5 : LBKRTB-M240 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. ΤΙΜΗ 5 ΜΕΤΡΩΝ ΡΟΛΛΟΥ 153

Environmental Compliance PLCC lightbar FPC series are compliant to the Restriction Hazardous Substances Directive or RoHS. The restricted materials including lead, mercury cadmium hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ether (PBDE) are not used in PLCC lightbar FPC series to provide an environmentally friendly product to the customers. Application Notes PLCC Lightbar FPC series are available in cool white, neutral white and warm white for application such as under-cabinet lighting, cove lighting and wall washing. Moreover, additional fine-tuned high color rendering index (CRI) version white, neutral white and warm white all make PLCC Lightbar FPC series the ideal lighting choice for vividly displaying fruit and vegetables and/or refrigeration products, presenting the true color the products and reflecting the freshness goods. 154

ΤΙΜΗ 4 ΜΕΤΡΩΝ ΡΟΛΛΟΥ 155

ΤΙΜΗ ΡΟΛΛΟΥ 4 ΜΕΤΡΩΝ 156

www.edison-opto.com.tw Solid-State Lighting Series PLCC Lightbar with Heatsink Series Datasheet (IP67) With the newly introduced PLCC Lightbar from Edison Opto, users can now fashion their own choices lighting without the excess limitation a lighting fixture. The PLCC Lightbar features multi-chips packaged 5050 PLCC SMDs on an extruded heat-sink 20mm (0.8 ) wide and length up to 120cm (47.2 ). The plastic caps at both ends the heat-sink combine with the slim linear are designed specifically to allow easy screw-tight installation at compact spaces where traditional light source cannot fit in. Features : High Brightness SMD LED Low Requirement & Energy Efficient Easily customized for length with several options IP67 Typical Applications : Tube Light Source Auditorium Walkway Lighting Stairway Accent Lighting Cabinet Lighting Specifications : CRI 80 : Copyright 2009 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 157

Absolute Maximum Ratings Parameter Symbol Rating Units LED Junction Temperature T J 125 C Operating Temperature T opr -30 ~ +85 C Storage Temperature T stg -40 ~ +85 C Table 1 : Absolute maximum ratings for PLCC lightbar with heatsink series. Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum at all time. 2. are not designed to be driven in reverse bias. Electro-Optical Characteristics (T a =25 C) LBMx-F16 Series λd(nm)/ CCT(K) LBMR-F16/N0247 Red 16 15 2.40 160 120 620~630nm 58 LBMY-F16/N0247 Yellow 16 15 2.40 160 120 585~595nm 62 LBMA-F16/N0247 Amber 16 15 2.40 160 120 610~620nm 58 LBMG-F16/N0247 True Green 16 24 3.84 160 120 520~535nm 133 LBMB-F16/N0247 Blue 16 24 3.84 160 120 465~475nm 37 LBMW-F16/A0247 Cool White 16 24 3.84 160 120 6000K 192 LBMH-F16/D0247 Neutral White 16 24 3.84 160 120 4100K 163 LBMX-F16/D0247 Warm White 16 24 3.84 160 120 3050K 163 Table 2 : LBMx-F16 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. 158

LBMx-F24 Series λd(nm)/ CCT(K) LBMR-F24/N0248 Red 24 15 3.60 240 120 620~630nm 87 LBMY-F24/N0248 Yellow 24 15 3.60 240 120 585~595nm 94 LBMA-F24/N0248 Amber 24 15 3.60 240 120 610~620nm 87 LBMG-F24/N0248 True Green 24 24 5.76 240 120 520~535nm 200 LBMB-F24/N0248 Blue 24 24 5.76 240 120 465~475nm 56 LBMW-F24/A0248 Cool White 24 24 5.76 240 120 6000K 288 LBMH-F24/D0248 Neutral White 24 24 5.76 240 120 4100K 245 LBMX-F24/D0248 Warm White 24 24 5.76 240 120 3050K 245 Table 3 : LBMx-F24 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. LBMx-F32 Series λd(nm)/ CCT(K) LBMR-F32/N0249 Red 32 15 4.80 320 120 620~630nm 116 LBMY-F32/N0249 Yellow 32 15 4.80 320 120 585~595nm 125 LBMA-F32/N0249 Amber 32 15 4.80 320 120 610~620nm 116 LBMG-F32/N0249 True Green 32 24 7.68 320 120 520~535nm 266 LBMB-F32/N0249 Blue 32 24 7.68 320 120 465~475nm 75 LBMW-F32/A0249 Cool White 32 24 7.68 320 120 6000K 384 LBMH-F32/D0249 Neutral White 32 24 7.68 320 120 4100K 326 LBMX-F32/D0249 Warm White 32 24 7.68 320 120 3050K 326 Table 4 : LBMx-F32 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. 159

LBMx-F48 Series λd(nm)/ CCT(K) LBMR-F48/N0250 Red 48 15 7.20 480 120 620~630nm 175 LBMY-F48/N0250 Yellow 48 15 7.20 480 120 585~595nm 187 LBMA-F48/N0250 Amber 48 15 7.20 480 120 610~620nm 175 LBMG-F48/N0250 True Green 48 24 11.52 480 120 520~535nm 399 LBMB-F48/N0250 Blue 48 24 11.52 480 120 465~475nm 112 LBMW-F48/A0250 Cool White 48 24 11.52 480 120 6000K 576 LBMH-F48/D0250 Neutral White 48 24 11.52 480 120 4100K 490 LBMX-F48/D0250 Warm White 48 24 11.52 480 120 3050K 490 Table 5 : LBMx-F48 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. LBMx-F64 Series λd(nm)/ CCT(K) LBMR-F64/N0251 Red 64 15 9.60 640 120 620~630nm 233 LBMY-F64/N0251 Yellow 64 15 9.60 640 120 585~595nm 250 LBMA-F64/N0251 Amber 64 15 9.60 640 120 610~620nm 233 LBMG-F64/N0251 True Green 64 24 15.36 640 120 520~535nm 532 LBMB-F64/N0251 Blue 64 24 15.36 640 120 465~475nm 150 LBMW-F64/A0251 Cool White 64 24 15.36 640 120 6000K 768 LBMH-F64/D0251 Neutral White 64 24 15.36 640 120 4100K 630 LBMX-F64/D0251 Warm White 64 24 15.36 640 120 3050K 630 Table 6 : LBMx-F64 series electric-optical characteristics. Note : Flux is measured with an accuracy ± 10%. 160

LBMRTB-Nxx/N06xx Series λd(nm)/ CCT(K) Red 620~630nm 16.8 LBMRTB-N14/ N0647 True Green 14 24 0.96 40 120 520~535nm 38.08 Blue 465~475nm 11.2 Red 620~630nm 25.2 LBMRTB-N21/ N0648 True Green 21 24 1.44 60 120 520~535nm 57.12 Blue 465~475nm 16.8 Red 620~630nm 36.6 LBMRTB-N28/ N0649 True Green 28 24 1.92 80 120 520~535nm 76.16 Blue 465~475nm 22.4 Red 620~630nm 50.4 LBMRTB-N42/ N0650 True Green 42 24 2.88 120 120 520~535nm 114.24 Blue 465~475nm 33.6 Red 620~630nm 67.2 LBMRTB-N56/ N0651 True Green 56 24 3.84 160 120 520~535nm 152.32 Blue 465~475nm 44.8 Table 7 : LBMRTB-Nxx/N06xx series electrico-optical characteristics. Note : Flux is measured with an accuracy ± 10%. 161

Assembly Instructions 1.Use M3 screw to secure the clamp on a level surface. 2.Push-lock the lightbar. Lightbar Screw Clamp Level Surface Figure 21 : PLCC lightbar with heatsink series (IP67) Assembly Instructions. Note : Every lightbar comes with a set accessories including two clamps and two M3 screws. Environmental Compliance PLCC lightbar with heatsink series are compliant to the Restriction Hazardous Substances Directive or RoHS. The restricted materials including lead, mercury cadmium hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ether (PBDE) are not used in PLCC lightbar with heatsink series to provide an environmentally friendly product to the customers. 162

Application Notes PLCC Lightbar series are available in red, yellow, green, blue, white, neutral white and warm white for application such as under-cabinet lighting, cove lighting and wall washing. Moreover, additional fine-tuned high color rendering index (CRI) version white, neutral white and warm white all make PLCC Lightbar the ideal lighting choice for vividly displaying fruit and vegetables and/or refrigeration products, presenting the true color the products and reflecting the freshness goods. 163