R MIL-TL-353 Micro- onnector MIL-TL-353 Micro- onnector R04J Series rimp ontact Type Introduction Micro- connectors Twist pin contact, high density interconnection Metal shell,plated nickel or cadmium ontacts:eu,gold over nickel plating old thikness:.27micron minimum Iinsulator:20% PPS (20% glass filled polyphenylene sulfide) rimp contact type 2 2 2 The sectional area of cable:0.mm ~0.5mm,0.07mm Meet MIL-TL-353 Specification ontact arrangements nvironment nvironmenttemperature: temperature:-55-55 ~~25 25 0z~2000z, Vibration: Vibration: 0z~2000z 96m/s22 22 Random Random vibration: vibration: Power spectrum spectrum density density0.4 0.4/ /z rootroot mean square value of of z, mean square value total total acceleration acceleration.. 735m/s22 ms Shock: Shock: 3 Rated Ratedcurrent: current : 3 0 ontact ontactresistance: resistance: mω 0 mω 5000 Insulation Insulationresistance: resistance: Ω 5000MΩ 00V ielectric ielectricstrength: strength: urability: urability: 500 times 9 5 6 3 R04J-25 pins R04J-2 pins 5 20 37 4 25 2 R04J-5 pins 7 3 2 9 5 R04J-9 pins 36 9 35 6 66 45 9 R04J-66 pins R04J-5 pins 5 40 2 74 57 39 20 46 24 R04J-37 pins R04J-3 pins 00 76 75 5 52 27 26 R04J-74 pins R04J-00 pins ace view plug connector ow To Order rimp ontact onnectors Sample part number R04J -25 PI W7 Series: R04J standard type R04J fast lock type R04J Sn-P bronze shell, finish nickel R04J assembly hole is threaded hole:m2-6 R04JS glue sealing ontact number: 9, 5, 2, 25, 3, 37, 5, 66, 74, 00pins ontact type : PI pin in plug R socket in receptacle Locking component type: blank without Regarding locking component type,please see page2 Shell material and finish : lank luminum shell,finish nickel luminum shell,finish cadmium able clamp type: blank without 2 2 type type 3 3 type, the datasheet, please see page3 xtended Series : lank standard type with anti-rotation slot on the outer shell (9.6) the width of flange is 9.6mm Q widen the flange (.6) the width of flange is.6mm the outlet direction of cable is vertical to contacts Q the flange size and assembly hole size are enlarged from R04J crimp contact basic type Remark: The accessories is not included in the order information, please mark the cable type. or example:the sectional area, the length and the color of cable. If the cable is special, please provide the drawing and spec. to us. sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
R MIL-TL-353 Micro- onnectors R04J crimp contact type free end locking component W 7. W #2-56UN-2 7. Outline dimension ssembly picture Matched with locking component Q,Q0,Q2,Q3,Q4,Q5,Q7,Q,Q9,Q0,Q, Q4,Q5,Q7,Q,Q25,Q29,Q32,Q35, Q36,Q37,Q4,Q42,Q43,Q45,Q46 Type 5.9 Q Q,Q0,Q2,Q3,Q4,Q5,Q7,Q,Q9,Q0,Q, Q4,Q5,Q7,Q,Q25,Q29,Q32,Q35, Q36,Q37,Q4,Q42,Q43,Q45,Q46 7. 7..3 (3.5) W7.5 M2-6 2. (3.5) W9.2 2.6 Q,Q0,Q2,Q3,Q4,Q5,Q7,Q,Q9,Q0,Q, Q4,Q5,Q7,Q,Q25,Q29,Q32,Q35, Q36,Q37,Q4,Q42,Q43,Q45,Q46 Note W9 just suitable for R04J series product. Ø4 Q,Q0,Q2,Q3,Q4,Q5,Q7,Q,Q9,Q0,Q, Q4,Q5,Q7,Q,Q25,Q29,Q32,Q35, Q36,Q37,Q4,Q42,Q43,Q45,Q46 #2-56UN-2 5.9 7.7 N 7. N Q R04J crimp contact type fixed end locking component rief introduction Type Outline dimension Matched with locking component ssembly picture 2.6 W, W7, W9, N Q 2.6 W, N 5.6 Q9 2.6 Q0 4. 0.6 2.6 Q3 3.3.4 2.6 Q4 2.5 2.2 2.6 Q.3 3.4 2.6 Q45 2.7 2 20 W,W7,W9,N Note: just suitable for front panel mounting W,W7,N M2-5 #2-56UN-2 #2-56UN-2 Q W, W7, W9, N 2.6 Q Mounting panel Note: These Kinds components just suitable for rear panel mounting M2-5 M3-6h 0.5 3.3min Q36 M3-6h 6 min Q37 0 2.min Q43 M3-6h.7 4 min Q29 W,W7,W9,N Note:. Just suitable for front panel mounting 2. Suitable for R04JS series.3 2.6 4. Mounting panel 2.6 2.6 Q44 4. 4..3.3.3 Mounting panel Mounting panel front panel mounting front panel mounting rear panel mounting rear panel mounting Note:. Not need to lock with locking component of free end 2. ront panel mounting, dimension is 2.5~3.5mm 3. Rear panel mounting, ()Mated with connector without locking component, dimension is 3.5mm max (2) Mated with connector which have fixed end locking component, dimension =-.3-(distance between bolt and flange of mated with connector) Remark:. ixed end locking component apply to fix the connector on the mounting panel or the P.Most fixed end locking component can mate with free end locking component. ew fixed end locking component can't mate with free end locking component.(eg. : Q44) 2. ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 2
R R04J series cable clamp Type Stereogram Outline dimension Using condition cable clamp suitable for R04J crimp contact basic type,usually apply to free end locking component Plug with cable clamp 0.7 0.7 2 2 cable clamp just suitable for R04J-9~5PI/R-Q Plug with 2 cable clamp 3 5.6 0.7 MIL-TL-353 Micro- onnector Without connector, only cable clamp Without connector, only 2 cable clamp 3 cable clamp suitable for R04J crimp contact basic type and R04J solder cup basic type Without connector, only 3 cable clamp Pin ount Plug with 3 cable clamp 2 3 9 5 2 25 3 37 5 66 74 00 9.9.6 0.4.7 22 3.4 9.6 9.9.2 0.4 27 3.. 0.4 5.6 22 3.4 3..2 0.4 27 7.6.6 0.4 9.4 22 3.4 27.4 7.6 9.2 0.4 2 20.2.6 0.4 22 22 3.4 29. 20.2 9.2 0.4 2 24.6 0.4 25. 22 3.4 33.6 24 9.2 0.4 2 27..6 0.4 29.6 22 3.4 37.4 27. 9.2 0.4 2 26.6 26.6.2 2.4 22 36.4 26.6 2.2.2 30 33 26.6.2 --- --- --- 42.9 29. 2.2.2 30 29. 30 2 --- --- --- 3. 29. 2.2 2 30 40.7 30 2 --- --- --- 5 40.7 2.2 2 30 Remark: ll dimensions are in mm 3 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
R04J series crimp contact basic type ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R() Shell Plating inish: Nickel, admium MIL-TL-353 Micro- onnectors Plug:PI Receptacle:R Outline imension Plug:PI Receptacle:R 0.5 R04J- PI R04J- R Part Number R04J-9PI/PI 9.6 4.3 7.6.3 9.9 R04J-5PI/PI.2 7.6 2.3 3. R04J-2PI/PI 27.4 22 7.6 6 7.6 R04J-25PI/PI 29. 24.5 7.6.6 20.2 R04J-3PI/PI 33.6 2.3 7.6 2 24 R04J-37PI/PI 37.4 32.2 7.6 26.3 27. R04J-5PI /PI 36.4 30.6.7 25 26.6 5. 7.9 R04J-66PI /PI 42.9 37.3.7 3.4 33 5. 7.9 R04J-74PI /PI 3. 33.5 9.7 27.5 29. 9. R04J-00PI/PI 5 45.7 9.7 35 36.6 9. R04J-9R/R 9.6 4.3 7.6 9. 9.9 R04J-5R /R.2 7.6 3.7 3. R04J-2R /R 27.4 22 7.6 7.4 7.6 R04J-25R /R 29. 24.5 7.6 20 20.2 R04J-3R /R 33.6 2.3 7.6. 24 R04J-37R /R 37.4 32.2 7.6 27.7 27. R04J-5R /R 36.4 30.6.7 26.5 26.6 7.2 7.9 R04J-66R /R 42.9 37.3.7 32.9 33 7.2 7.9 R04J-74R /R 3. 33.5 9.7 29 29..3 9. R04J-00R /R 5 45.7 9.7 36.6 36.65.2 9. Remark: ll dimensions are in mm Outline imension after mating cable Plug receptacle The main view R04J series crimp contact basic type The left view Sn-P bronze outer shell,plated nickel ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R Outline dimension: same as R04J crimp contact basic type,please see above datasheet sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 4
MIL-TL-353 Micro- onnector R04J series crimp contact extended type- The outlet direction of cable is vertical to the contacts, termination type is crimp contact. ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R- Plug:PI- Receptacle:R- Outline imension 5. 6.5 9. 0. 9 R04J-9 37 PI- R04J-5, 66PI- R04J-74, 00PI- The left view for R04J-9 00 PI- size for 5 pins is 5.5 size for 66 pins is 7. R04J-9 37R- R04J-5, 66 R- R04J-74, 00R- The left view for R04J-9 00 PI- size for 5 pins is 5.5 size for 66 pins is 7. Part Number PI- R- RQ4J-9PI/R- 9.6 4.3.3 9. 9.9 R04J-5PI/R-.2 2.3 3.7 3. R04J-2PI/R- 27.4 22 6 7.4 7.6 R04J-25PI/R- 29. 24.5.6 20 20.2 R04J-3PI/R- 3.6 2.3 2. 24 R04J-37PI/R- 37.4 32.2 26.3 27.7 27. R04J-5PI/R- 36.4 30.6 25 26.5 26.6 R4J-66PI/R- 42.9 37.3 3.4 32.9 33 R4J-74PI/R- 3. 33.5 27.5 29 29. R04J-00PI/R- 5 45.7 35 36.6 36.6 Remark: ll dimensions are in mm The outlet direction of cable for R04J- PI- is opposite to R04J- R-. 5 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
R04J series crimp contact extended type- With anti-rotation slots on the flange ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R- Plug:PI- 0.5 0.6 R04J- PI- Receptacle:R- 3 MIL-TL-353 Micro- onnectors Outline imension 0.6 4.3 R04J- P- Part Number R04J-9PI/R- R04J-5PI/R- R04J-2PI/R- R04J-25PI/R- R04J-3PI/R- R04J-37PI/R- R04J-5PI/R- R04J-66PI/R- R04J-74PI/R- R04J-00PI/R- Remark: ll dimensions are in mm PI- R- PI- R- 9.6 4.3 7.6.3 9. 9.9.2 7.6 2.3 3.7 3. 27.4 22 7.6 6 7.4 7.6 29. 24.5 7.6.6 20 20.2 33.6 2.3 7.6 2. 24 37.4 32.2 7.6 26.3 27.7 27. 36.4 30.6.7 25 26.5 26.6 5. 7.2 7.9 42.9 37.3.7 3.4 32.9 33 5. 7.2 7.9 3. 33.5 9.7 27.5 29 29..3 9. 5 45.7 9.7 35 36.6 36.6 / 36.65.2 9. R04J series crimp contact extended type(9.6) The width of flange is 9.6mm Plug:PI(9.6) ontacts: R04J- 9, 5, 2, 25, 3, 37,PI/R(9.6) Receptacle:R(9.6) Outline imension 0.5 R04J- PI(9.6) R04J- R(9.6) Part Number R04J-9PI/R(9.6) R04J-5PI/R(9.6) R04J-2PI/R(9.6) R04J-25PI/R(9.6) R04J-3PI/R(9.6) R04J-37PI/R(9.6) 9.6 27.4 29. 33.6 37.4 4.3.2 22 24.5 2.3 32.2 9.6 9.6 9.6 9.6 9.6 9.6 PI R.3 9. 2.3 3.7 6 7.4.6 20 2. 26.3 27.7 9.9 3. 7.6 20.2 24 27. Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 6
R MIL-TL-353 Micro- onnector R04J series crimp contact extended type(.6) The width of flange is.6mm ontacts: R04J- 9, 5, 2, 25, 3, 37,PI/R(.6) Receptacle:R(.6) Plug:PI(.6) Outline imension 2-..2 R 9.6 4.3.6.3 9. 9.9 R04J-5PI/R(.6).2.6 2.3 3.7 3. R04J-2PI/R(.6) 27.4 22.6 6 7.4 7.6 R04J-25PI/R(.6) 29. 24.5.6.6.6 20 20.2 R04J-3PI/R(.6) 33.6 2.3.6 2. 24 R04J-37PI/R(.6) 37.4 32.2.6.6 26.3 27.7 27. R04J- PI(9.6) / R04J- PI(.6) R04JPI(.6) 2-..2 PI R04J-9PI/R(.6) Part Number 0.5 0.5 R04J- R(.6)/ R04J series crimp contact extended type-q rubber cushion the flange is widened with a rubber cushion,thickness:mm Shell Plating inish: Nickel, admium ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R-Q/Q Outline imension Receptacle:R-Q Plug:PI-Q 0.5 0.5 Receptacle:R-Q Plug:PI-Q R04J- PI-Q R04J- PI-Q R04J- R-Q R04J- R-Q rubber cushion Part Number R04J-9PI/R-Q R04J-5PI/R-Q R04J-2PI-Q R04J-2PI/R-Q R04J-25PI-Q R04J-25PI/R-Q R04J-3PI-Q R04J-3PI/R-Q R04J-37PI/R-Q R04J-5PI/R-Q R04J-66PI/R-Q R04J-77PI/R-Q R04J-00PI/R-Q 26 29.9 33. 36.2 40 43. 42.6 49.3 45.2 6. 2 2 2.7 3.2 35 3.9 37.6 44 40.2 5 4 4 4 4 4 4 5.2 5.2 PI.3 R.3 9. 2.3 3.7 6 7.4.6 20 2. 26.3 27.7 25 26.5 3.4 32.9 27.5 29 35 36.6 9.9 3. 7.6 20.2 24 27. 26.6 33 29. 36.6 / 36.65 PI 5. 5. R 7.2 7.2.3.2. 7.9 7.9 9. 9. Remark: ll dimensions are in mm 7 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
MIL-TL-353 Micro- onnectors Sn-P bronze outer shell,plated nickel R04J series crimp contact extended type-q Outline dimension: Same as R04J- * R-Q,please see above datasheet ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 R-Q the flange is widened with a rubber cushion,thickness:mm R04J series crimp contact extended type-q The flange size and assembly hole size are enlarged from R04J crimp contact basic type ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R-Q Plug:PI-Q Receptacle:R-Q Outline imension 0.5 R04J- PI-Q R04J- R-Q Part Number PI-Q R-Q PI-Q R-Q R04J-9PI-Q/R-Q R04J-5PI-Q/R-Q RQ4J-2PI-Q/R-Q RQ4J-25PI-Q/R-Q R04J-3PI-Q/R-Q R04J-37PI-Q/R-Q R04J-5PI-Q/R-Q 2.4.6.3 9..7 25.3 20.6 2.3 3.7 5.6 29.2..6 6 7.4 9.4 3.6 26.3.6.6 20 22 35.4 30..6 2. 25. 39.2 34.6 26.3 27.7 29.6 3.2 32.6 2.6 25 26.5 2.4 5. 7.2 7.9 Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
MIL-TL-353 Micro- onnector R04J series crimp contact extended type- with anti-rotation slots on the flange with shielded cable clamp on the tail of outer shell ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R- Plug:PI- Receptacle:R- Outline imension 0.6 3 4.3 2-Φ3.2 R04J- PI- R04J- R- Part Number RQ4J-9PI-/R- R04J-5PI-/R- R04J-2PI-/R- R04J-25PI-/R- R4J-3PI-/R- R04J-37PI-/R- R04J-5PI-/R- R04J-66PI-/R- R04J-74PI-/R- R04J-00PI-/R- PI- R- PI- R- PI- R- 9.6 4.3.3 9. 9.9.2 2.3 3.7 3. 27.4 22 6 7.4 7.6 29. 24.5.6 20 20.2 33.6 2.3 2. 24 37.4 32.2 26.3 27.7 27. 36.4 30.6 25 26.5 26.6 5. 7.2 9 42.9 37.3 3.4 32.9 33 5. 7.2 9 3. 33.5 27.5 29 29..3 25 25.5 5 45.7 35 36.6 3.2 25 25.5 Remark: ll dimensions are in mm 9 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
R MIL-TL-353 Micro- onnectors R04J series crimp contact basic type -/ with shielded cable clamp on the tail of outer shell Shell Plating inish: Nickel ontacts: 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R- R04JReceptacle Plug:PI- Receptacle:R- with shielded cable clamp on the tail of outer shell Shell Plating inish: admium ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R- Plug:PI- Receptacle:R- Outline imension 2-Φ3.2 R04J-9~00R-/ R04J-9~00PI-/ Pin ount 9PI/R 5PI/R 2PI/R 25PI/R 3PI/R 37PI/R 5PI/R 66PI/R 74PI/R 00PI/R 9.6 27.4 29. 33.6 37.4 36.4 42.9 3. 5 4.3.2 22 24.5 2.3 32.2 30.6 37.3 33.5 45.7 Remark: ll dimensions are in mm PI.3 2.3 6.6 2 26.3 25 3.4 27.5 35 R 9. 3.7 7.4 20. 27.7 26.5 32.9 29 36.6 9.9 3. 7.6 20.2 24 27. 26.6 33 29. 3 PI 5. 5. R 7.2 7.2.3.2 9 9 PI 25 25 R 25.5 25.5 9~66pins pins 9~66 25.5 25.5 5.7 5.7 5.7 5.7 receptacle receptacle plug plug ppearance dimension dimension ppearance plug plug receptacle receptacle 2-Φ3.2 74,00 00pins pins 74, sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 0
MIL-TL-353 Micro- onnector R04J series crimp contact extended type-(9.6) The width of flange is 9.6mm With shielded cable clamp on the tail of outer shell ontacts: R04J- 9, 5, 2, 25, 3, 37,PI/R-(9.6) Plug:PI-(9.6) Receptacle:R-(9.6) Outline imension 9.6 9.6 R04J-9~37PI-(9.6) R04J-9~37R-(9.6) Part Number PI-(9.6) R-(9.6) R04J-9PI/R-(9.6) 9.6 4.3.3 9. 9.9 R04J-5PI/R-(9.6).2 2.3 3.7 3. R04J-2PI/R-(9.6) 27.4 22 6 7.4 7.6 R04J-25PI/R-(9.6) 29. 24.5.6 20 20.2 R04J-3PI/R-(9.6) 33.6 2.3 2. 24 R04J-37PI/R-(9.6) 37.4 32.2 26.3 27.7 27. Remark: ll dimensions are in mm R04J series crimp contact extended type-(.6) The width of flange is.6mm With shielded cable clamp on the tail of outer shell With anti-rotation slots on the flange ontacts: R04J- 9, 5, 2, 25, 3, 37R-(.6) Outline imension 2-3.6 2-3.6.6 0.6 0.6 Receptacle:R-(.6) Part Number R04J-9R-(.6) 9.6 4.3 9. 9.9 R04J-5R-(.6).2 3.7 3. R04J-2R-(.6) 27.4 22 7.4 7.6 R04J-25R-(.6) 29. 24.5 20 20.2 R04J-3R-(.6) 33.6 2.3. 24 R04J-37R-(.6) 37.4 32.2 27.7 27. Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 R04J-9~37R-(.6)
MIL-TL-353 Micro- onnectors R04J series crimp contact extended type-2q The flange size and assembly hole size are enlarged from R04J-*PI/R With shielded cable clamp on the tail of outer shell ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 74, 00 PI /R-2Q Plug:PI-2Q Receptacle:R-2Q Outline imension 2-Φ3.2 2-Φ3.2 R04J-9~00P I -2Q R04J-9~00R-2Q Part No. R04J-9PI/R-2Q R04J-5PI/R-2Q R04J-2PI/R-2Q R04J-25PI/R-2Q R04J-3PI/R-2Q R04J-37PI/R-2Q R04J-5PI/R-2Q R04J-74PI/R-2Q R04J-00PI/R-2Q PI-2Q R-2Q PI-2Q R-2Q PI-2Q R-2Q 2.4.6.3 9. 9.9 25.3 20.6 2.3 3.7 3. 29.2..6 6 7.4 7.6 3.6 26.3.6.6 20 20.2 35.4 30..6 2. 24 39.2 34.6 26.3 27.7 27. 3.2 32.6 2.6 25 26.5 26.6 5. 7.2 9 40.6 37. 3. 27.5 29 29..3 25 25.5 56.5 49.3 3. 35 36.6 3.2 25 25.5 Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 2
2 R MIL-TL-353 Micro- onnector R04J series crimp contact extended type-q Outer shell is plated with cadmium With shielded cable clamp on the tail of outer shell Plug:PI-Q Receptacle:R-Q The flange is widened ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI /R-Q Outline imension R04J-9~00PI-Q R04J-9~00R-Q Pin ount 9PI/R-Q 5PI/R-Q 2PI/R-Q 25PI/R-Q 3PI/R-Q 37PI/R-Q 5PI/R-Q 66PI/R-Q 74PI/R-Q 00PI/R-Q PI R 2 4.3 9. 2 4 2.3 3.7 2.7 4 6 7.4 3.2 4.6 20 35 4 2. 3.9 4 26.3 27.7 37.6 5.2 25 26.5 26 29.9 33. 36.2 40 43. 42.6 49.3 45.2 6. 44 5.2 3.4 32.9 40.2 27.5 29 5 35 36.6 9.9 3. 7.6 20.2 24 27. 26.6 33 29. 3 PI R PI R 5. 7.2 9 5. 7.2 9.3 25 25.5.2 25 25.5 R04J series crimp contact of fast lock type---r04j With fast lock function rimp contact termination type Plug: R04J-* PI Receptacle: R04J-*R ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI / R 2.6 2-Ø2. R04J- PI R04J- R Remark: ll dimensions are in mm 6.4 Part number Part number R04J-9PI.2.4. R04J-9R.4.6 7.6 4.3 9. 6.5 R04J-5PI 22. 2.3. R34J-5R 27.4 22.6 7.6.3 3. 6.5 R04J-2PI 25. 6. R04J-2R 3. 26.3 7.6 22 7.5 6.5 R04J-25PI 2.4.6. RMJ-25R 33.7 2.9 7.6 2 20. 6.5 R04J-3PI 32.2 2. R4J3R 37.5 32.7 7.6 2.4 24. 6.5 R04J-37PI 36 26.3. RQ4J-37R 4.4 36.6 7.6 32.3 27. 6.5 R04J-5PI 34. 25 5. 0 R4J-5R 40. 35.3.7 3 26.5 7.6 7.9 R04J-74PI 37.3 27.5 R4J-74R 42.6 37. 9. 33.5 29.7 9 R04J-00PI 44. 35 R04J-00RI 50. 45.3 9. 4 36.5.7 9 Solid picture and appearance dimension after mating 3 Outline imension Part number Part number R04J-9PI/R.4. R04J-37PI/R 4.4. R04J-5PI/R 27.4. R04J-5PI/R 40. 0 R04J-2PI/R 3., R04J-74PI/R 42.6 R04J-25PI/R 33.7. R04J-00PI/R 50. R04J-3PI/R 37.5. 3 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
MIL-TL-353 Micro- onnectors R04J series crimp contanct extended type---r04j The assembly hole is threaded hole : M2-6 rimp contact termination type Plug: R04J-* PI ontacts: R04J- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 PI / R Receptacle: R04J-* R Outline imension 0.5 2-M2-6 2-M2-6 Plug Receptacle Part number R04J-9PI/R R04J-5PI/R R04J-2PI/R R04J-25PI/R R04J-3PI/R R04J-37PI/R R04J-5PI/R R04J-66PI/R R04J-74PI/R R04J-00PI/R Remark: ll dimensions are in mm PI R PI R 9.6 4.3 7.6.3 9. 9.9.2 7.6 2.3 3.7 3. 27.4 22 7.6 6 7.4 7.6 29. 24.5 7.6.6 20 20.2 33.6 2.3 7.6 2. 24 37.4 32.2 7.6 26.3 27.7 27. 36.4 30.6.7 25 26.5 26.6 5. 7.2 7.9 42.9 37.3.7 3.4 32.9 33 5. 7.2 7.9 3. 33.5 9.7 27.5 29 29..3 9. 5 45.7 9.7 35 36.6 36.6 / 36.65.2 9. Solid picture and appearance dimension after mating able Plug Receptacle The main view The left view sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 4
MIL-TL-353 Micro- onnector R04J series crimp contanct of gule sealing type---r04js sealing cushion lue sealing With a sealing cushion,thickness:mm Insulation resistance: Ω 2000-2 3 The air leakage rate: X0 Pa. M /S rimp contact termination type Receptacle: R04JS-* R ontacts: R04JS- 9, 5, 2, 25, 3, 37, 5, 66, 74, 00 R 5 Outline imension Part number R04JS-9R 9.6 4.3 2 9. 9.9 R04JS-5R.2 2 3.7 3. R04JS-2R 27.4 22 2 7.4 7.6 R4JS-25R 29. 24.5 2 20 20.2 R4JS-3R 33.6 2.3 2. 24 R04JS-37R 37.4 32.2 2 27.7 27. R04JS-5R 36.4 30.6 3 26.5 26.6 7.2 7.9 R04JS-74R 3. 33.5 4 29 29..3 9. R04JS-00R 5 45.7 4 36.65 3 3.2 9. R04J series crimp contact type - mounting hole dimension Suitable for product: R04J-*PI/R R04J-*PI/R- R04J-*PI/R R04J-*PI/R(9.6) R04J-*PI/R(.6) R04J-*PI/R R04J-*R 2-R 2.3 2-R 3.2 R.5 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins Pin ount 4.3 0.2 7 6.3 37 pins 32.2 2. 7 6.3.2 4. 7 6.3 5pins 30.6 26.9. 7.4 22 7.9 7 6.3 66 pins 37.3 33.4. 7.4 24.5 20.5 7 6.3 74 pins 33.5 29.4 9.3.6 3 pins 2.3 24.3 7 6.3 00 pins 45.7 37 9.3.6 - - Remark:. R04JS is sealing product,we suggest to use un-throught threaded mounting hole for front panel mounting 2. ll dimensions are in mm 5 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
MIL-TL-353 Micro- onnectors R04J series crimp contact type - mounting hole dimension Suitable for product: R04J-*PI/R-Q R04J-*PI/R-Q R04J-*R-Q 2-2.3 R.5 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins 3 pins Pin ount 2 0.2 7 6.3 37 pins 3.9 2. 7 6.3 2 4. 7 6.3 5pins 37.6 26.9. 7.4 2.7 7.9 7 6.3 66 pins 44 33.4. 7.4 3.2 20.5 7 6.3 74 pins 40.2 29.4 9.3.6 35 24.3 7 6.3 00 pins 5 37 9.3.6 Suitable for product: R04J-*PI/R-Q 2-φ2.3 2-φ3.2 R.5 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins Pin ount 2 7 6.3 3 pins 30. 2 7 6.3 20 5.9 7 6.3 37 pins 34 29.9 7 6.3. 9.7 7 6.3 5pins 32.6 2.7. 7.4 26.3 22.3 7 6.3 Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250 6
MIL-TL-353 Micro- onnector R04J series crimp contact type - mounting hole dimension Suitable for product: R04J-*PI/R- R04J-*PI/R- R04J-*PI/R- R04J-*PI/R-(9.6) R04J-*PI/R-(.6) R04J-*PI/R-(.6) 2-R 3.2 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins Pin ount 4.3 0.2.2 6.3 37 pins 32.2 2..2 6.3.2 4..2 6.3 5pins 30.6 26.9 9.2 7.4 22 7.9.2 6.3 66 pins 37.3 33.4 9.2 7.4 24.5 20.5.2 6.3 74 pins 33.5 29.4.2.6 3 pins Suitable for product: R04J-*PI/R-2Q 2.3 24.3.2 6.3 00 pins 45.7 37.2.6 2-φ3.2 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins Pin ount 0.2.2 6.3 3 pins 30. 24.3.2 6.3 20 4..2 6.3 37 pins 34 2..2 6.3. 7.9.2 6.3 5pins 32.6 26.9 9.2 7.4 26.3 20.5.2 6.3 Remark: ll dimensions are in mm 7 sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250
MIL-TL-353 Micro- onnectors R04J series crimp contact type - mounting hole dimension Suitable for product: R04J-*R 2-R 2.3 Pin ount 9 pins 5 pins Pin ount.6 0.2 7 37 pins 36.6 2. 7 22.6 4. 7 5pins 35.3 26.9. R.5 Mounting hole dimension for front panel mounting Suitable for product: R04J-*PI/R- 2 pins 25 pins 3 pins 26.3 7.9 7 74 pins 37. 29.4 9.3 2.9 20.5 7 00 pins 45.3 37 9.3 32.7 24.3 7 2-R 2.3 2-R 3.2 4-R 26 Mounting hole dimension for front panel mounting Mounting hole dimension for rear panel mounting Pin ount 9 pins 5 pins 2 pins 25 pins Pin ount 4.3 0.2.2 6.3 37 pins 32.2 2..2 6.3.2 4..2 6.3 5pins 30.6 26.9 9.3 7.4 22 7.9.2 6.3 66 pins 37.3 33.4 9.3 7.4 24.5 20.5.2 6.3 74 pins 33.5 29.4 0.3.6 3 pins 2.3 24.3.2 6.3 00 pins 45.7 37 0.3.6 Remark: ll dimensions are in mm sunkye International o., Limited. mail: sales@sunkye.com Tel: 0052-6946797 ax: 0052-3250