DRO MRL MRL HYDRAULIC LIFTS TYPE: HYD Version: 1.1 Date: 26/04/2012 Page: 1/17 Range of Application 1
Version: 1.1 Date: 26/04/2012 Page: 2/17 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING 2:1... 4 LAYOUT ARRANGEMENT: ACTING 2:1... 5 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 5 Plan view... 5 SINGLE ENTRANCE GUIDE RAILS AT REAR... 6 Plan view... 6 ADJACENT ENTRANCES GUIDE RAILS AT THE SIDE... 7 Plan view... 7 THROUGH CAR GUIDE RAILS AT THE SIDE... 8 Plan view... 8 GENERAL SECTION VIEW... 9 Section view... 9 TECHNICAL SPECIFICATION... 10 ACTING 1:1... 10 LAYOUT ARRANGEMENT: ACTING 1:1... 11 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 11 Plan view... 11 SINGLE ENTRANCE GUIDE RAILS AT REAR... 12 Plan view... 12 ADJACENT ENTRANCES GUIDE RAILS AT THE SIDE... 13 Plan view... 13 THROUGH CAR GUIDE RAILS AT THE SIDE... 14 Plan view... 14 GENERAL SECTION VIEW... 15 Section view... 15 CONTROLLER, CONTROL VALVES BLOCK AND OIL TANK... 16 CERTIFICATION... 17 MANUFACTURER S DECLARATION... 17 2
Version: 1.1 Date: 26/04/2012 Page: 3/17 3D layout 1. OIL TANK 2. MRL CABINET 3. LANDING DOORS 4. SHAFT WALL 5 GUIDE RAILS 6. GUIDE RAIL BRACKETS 7. WALL BRACKETS 8. PULLEY 9. ROPES 10. JACK 11. CAR SLING 12. GUIDE RAIL FISHPLATES 13. RAM SUPPORT BRACKET 14. CAR SLING SAFETY GEAR 15. RAM TUBE SUPPORT 16. RAM TUBE 17. BUFFER BASE 18. SUSPENSION BASE 3
Version: 1.1 Date: 26/04/2012 Page: 4/17 Technical specification Acting 2:1 *For car down speed > 0.63m/sec progressive safety gear is required for the car sling Type: HYDRAULIC LIFT MRL Rated Load: 450 Kg 630 Kg 750 Kg 1000 Kg No of Persons: 6 8 10 13 Min Headroom: 3350 mm 3350 mm 3350 mm 3350 mm Min Pit Depth: 1200 mm 1200 mm 1200 mm 1200 mm Car sling type: HFS-2237 HFS-2237 HFS-3137 HFS-3137 Guide Rails: T89x62x16 T89x62x16 T114x89x16 T114x89x16 Pulley Diameter & No of Ropes: Ø360x4 Ø400x4 Ø400x6 Ø400x6 MRL D100 Max travel: 8500 mm 8000 mm 5900 mm 5800 mm Piston (max): Ø90x5 Ø100x5 Ø110x5 Ø120x7 Max speed: 0.63 m/s 0.53 m/s 0.43 m/s 0.36 m/s Maximum motor power: Maximum pump capacity: 11 Kw 11 Kw 11 Kw 11 Kw 125 l/min 125 l/min 125 l/min 125 l/min MRL D300 Max travel: 22000 mm 20000 mm 20000 mm 20000 mm Piston (max): Ø110x12 Ø120x7 Ø130x7 Ø130x7 Max speed: 0.63 m/s 0.63 m/s 0.63 m/s 0.63 m/s Maximum motor power: Maximum pump capacity: 22.1 Kw 22.1 Kw 22.1 Kw 22.1 Kw 380 l/min 380 l/min 380 l/min 380 l/min 4
Version: 1.1 Date: 26/04/2012 Page: 5/17 Layout arrangement: acting 2:1 Single entrance guide rails at the side Plan view PASSENGERS CAPACITY (kg) CABIN WIDTH CW (mm) CABIN DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1600 1550 2PT 700x2000 8 630 1100 1400 1600 1800 2PT 800x2000 10 750 1200 1550 1700 1950 2PT 900x2000 13 1000 1300 1800 1800 2200 2PT 1000x2000 *2PT: 2 panel telescopic 5
Version: 1.1 Date: 26/04/2012 Page: 6/17 Layout arrangement: acting 2:1 Single entrance guide rails at rear Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1150 1100 1350 1800 2PT 700x2000 8 630 1400 1100 1600 1800 2PT 800x2000 10 750 1550 1200 1750 1900 2PT 900x2000 13 1000 1800 1300 2000 2000 2PT 1000x2000 *2PT: 2 panel telescopic 6
Version: 1.1 Date: 26/04/2012 Page: 7/17 Layout arrangement: acting 2:1 Adjacent entrances guide rails at the side Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1800 1550 2PT 700x2000 8 630 1100 1400 1800 1800 2PT 800x2000 10 750 1200 1550 1900 1950 2PT 900x2000 13 1000 1300 1800 2000 2200 2PT 1000x2000 *2PT: 2 panel telescopic 7
Version: 1.1 Date: 26/04/2012 Page: 8/17 Layout arrangement: acting 2:1 Through car guide rails at the side Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1600 1750 2PT 700x2000 8 630 1100 1400 1600 2000 2PT 800x2000 10 750 1200 1550 1900 2150 2PT 900x2000 13 1000 1300 1800 2000 2400 2PT 1000x2000 *2PT: 2 panel telescopic 8
Version: 1.1 Date: 26/04/2012 Page: 9/17 Layout arrangement: acting 2:1 General section view Section view HDR HEADROOM 3350 mm(min) UOT UP OVERTRAVEL 120 mm(min) T TRAVEL PD PIT DEPTH 1200 mm(min) DOT DOWN OVERTRAVEL 80 mm(min) 9
Version: 1.1 Date: 26/04/2012 Page: 10/17 Technical specification Acting 1:1 * For car down speed > 0.63m/sec progressive safety gear is required for the car sling Type: HYDRAULIC LIFT MRL Rated Load: 450 Kg 630 Kg 750 Kg 1000 Kg No of Persons: 6 8 10 13 Min Headroom: 3350 mm 3350 mm 3350 mm 3350 mm Min Pit Depth: 1200 mm 1200 mm 1200 mm 1200 mm Car sling type: HFS-2237-S HFS-2237-S HFS-3137-S HFS-3137-S Guide Rails: T82x68x9 T82x68x9 T89x62x16 T114x89x16 MRL D100 Max travel: 3200 mm 3200 mm 3200 mm 3200 mm Piston (max): Ø70x5 Ø70x5 Ø80x5 Ø90x5 Max speed: 0.63 m/s 0.63 m/s 0.63 m/s 0.63 m/s Maximum motor power: Maximum pump capacity: 22.1 Kw 22.1 Kw 22.1 Kw 22.1 Kw 380 l/min 380 l/min 380 l/min 380 l/min 10
Version: 1.1 Date: 26/04/2012 Page: 11/17 Layout arrangement: acting 1:1 Single entrance guide rails at the side Plan view PASSENGERS CAPACITY (kg) CABIN WIDTH CW (mm) CABIN DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1600 1550 2PT 700x2000 8 630 1100 1400 1600 1800 2PT 800x2000 10 750 1200 1550 1700 1950 2PT 1000x2000 13 1000 1300 1800 1800 2200 2PT 1100x2000 *2PT: 2 panel telescopic 11
Version: 1.1 Date: 26/04/2012 Page: 12/17 Layout arrangement: acting 1:1 Single entrance guide rails at rear Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1150 1100 1350 1800 2PT 700x2000 8 630 1400 1100 1600 1800 2PT 800x2000 10 750 1550 1200 1750 1900 2PT 900x2000 13 1000 1800 1300 2000 2000 2PT 1000x2000 *2PT: 2 panel telescopic 12
Version: 1.1 Date: 26/04/2012 Page: 13/17 Layout arrangement: acting 1:1 Adjacent entrances guide rails at the side Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1800 1550 2PT 700x2000 8 630 1100 1400 1800 1800 2PT 800x2000 10 750 1200 1550 1900 1950 2PT 900x2000 13 1000 1300 1800 2000 2200 2PT 1000x2000 *2PT: 2 panel telescopic 13
Version: 1.1 Date: 26/04/2012 Page: 14/17 Layout arrangement: acting 1:1 Through car guide rails at the side Plan view PASSENGERS CAPACITY (Kg) CAR WIDTH CW (mm) CAR DEPTH CD (mm) SHAFT WIDTH SW (mm) SHAFT DEPTH SD (mm) DOOR TYPE 6 450 1100 1150 1600 1750 2PT 700x2000 8 630 1100 1400 1600 2000 2PT 800x2000 10 750 1200 1550 1700 2150 2PT 900x2000 13 1000 1300 1800 1800 2400 2PT 1000x2000 *2PT: 2 panel telescopic 14
Version: 1.1 Date: 26/04/2012 Page: 15/17 Layout arrangement: acting 1:1 General section view Section view HDR HEADROOM 3350 mm(min) UOT UP OVERTRAVEL 120 mm(min) T TRAVEL 3200 mm(max) PD PIT DEPTH 1200 mm(min) DOT DOWN OVERTRAVEL 80 mm(min) 15
Version: 1.1 Date: 26/04/2012 Page: 16/17 Layout arrangement: Controller, control valves block and oil tank OIL TANK CABINET MEASURES TYPE MRL D100 MRL D300 TOTAL OIL QUANTITY 100 lit 300 lit RATED OIL QUANTITY 70 lit 240 lit OIL TANK A 285 mm 460 mm B 670 mm 870 mm C 1010 mm 1010 mm D 1250 mm 1300 mm CABINET E 335 mm 530 mm F 775 mm 970 mm 16
Version: 1.1 Date: 26/04/2012 Page: 17/17 Certification ΔΗΛΩΣΗ ΚΑΤΑΣΚΕΥΑΣΤΗ MANUFACTURER S DECLARATION Με το παρόν δηλώνεται ότι η εταιρεία: This is to declare that the company: DOPPLER S.A. ΒΙO.ΠΕ. Πολυκάστρου Πολύκαστρο, 61200 DOPPLER S.A. Industrial Park of Polikastro GR 61200, Polikastro Greece έχει εγκαταστήσει και εφαρμόζει ένα πλήρες Σύστημα Διασφάλισης Ποιότητας σύμφωνα με την οδηγία για τους ανελκυστήρες (95/16/ΕΚ, Παράρτημα ΧΙΙΙ, Ενότητα Η) και το πρότυπο ΕΝ ISO 9001:1994, για τo has established and operates a Quality Assurance System pursuant to the Lift Directive (95/16/EC, Annex XIII, Module H) and the EN ISO 9001:2000, for the Σχεδιασμό, Κατασκευή, Συναρμολόγηση, Μελέτες εγκατάστασης, Μέθοδοι για τον Τελικό Έλεγχο των Ανελκυστήρων Design, Manufacture, Assembly, Studies of Installation, Methods of final inspection and Testing of lifts. Το σύστημα αυτό εξασφαλίζει ότι ο ανελκυστήρας, Νο σχεδιάστηκε σύμφωνα με ένα ανελκυστήρα που ικανοποιεί όλες τις απαιτήσεις της οδηγίας των ανελκυστήρων και ο εγκαταστάτης μπορεί να τοποθετήσει τη σήμανση CE στον ανελκυστήρα ακολουθώντας μία από τις διαδικασίες που αναφέρονται στο άρθρο 8.2iii της οδηγίας. This system ensures that the lift, Nr was designed in accordance with a lift that satisfies all the requirements of the Lift Directive, and the installer may affix a CE marking on the Lift following the procedure drawn up to article 8.2.iii of the Directive. DOPPLER S.A. Βιομηχανία Ανελκυστήρων DOPPLER S.A. Lift Manufacturers Σταύρος Σταυρόπουλος Πρόεδρος & Διευθύνων Σύμβουλος Stavros Stavropoulos President & Managing Director 17