.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES
MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell Stable Mating / Un-mating by Long Guide Pin Broad Product Line Up >Pin Count : 8p~24p >Right Angle Type / Vertical Type / Straddle Type / Slim Type >Sequential contact by Ground Pins / Signal Pins / Power Pins through Mating and Un-mating Rated Current Rated Voltage D.W. Voltage Insulation Resistance Durability MINIDOCK Connector is designed for board to board connection and features small size with.635mm Pitch for applications in high density packaging. It also employs metallic Diecast Shell to minimize EMI noise. For Docking Station of Note-Book PC / Server / Medical Equipment / instrumentation / Small-Sized Electrical Devices.5A AC/DC 25V AC/DC AC 5V 1M ohm MIN. 5 cycles Material and Finish Product Parts Material Plating/Color INSULATOR PPS UL94V- BLACK PLUG LOCATOR PLATE PA UL94V- BLACK CONTACT COPPER ALLOY *1 Au FLASH METAL SHELL Zinc ALLOY Ni INSULATOR PPS UL94V- BLACK LOCATOR PLATE PA UL94V- BLACK RECEPTACLE CONTACT COPPER ALLOY *1 Au FLASH GUIDE PIN STEEL Ni METAL SHELL Zinc ALLOY Ni *1 Solder Tail Plating of (P/N)347, 359, 382 is Au Plating 1 I-PEX Co.,Ltd.
Mating Type Pattern 1 Standard Type Right Angle PLUG Right Angle RECE Pattern 2 Standard Type Right Angle PLUG Vertical RECE PLUG 31, 357, 375,382 RECE 32 PLUG RECE 31, 357, 375,382 37, 39 Pattern 3 Standard Type Pattern 4 Standard Type Right Angle PLUG Straddle RECE Straddle PLUG Right Angle RECE PLUG 31 RECE 36 PLUG 35 RECE 32 Pattern 5 Standard Type Straddle PLUG Straddle RECE PLUG 35 RECE 36 PLUG 387 RECE 388 Pattern 6 Slim Type Pattern 7 Slim Type Right Angle PLUG Right Angle RECE Right Angle PLUG Vertical RECE PLUG 329 RECE 33 PLUG RECE 346, 359, 395 356 PLUG RECE 346, 359, 395 347 2
Product Overview <PLUG> STANDARD Type Type Sequence Contact Series No. Pin Count Mating No. Note View Page Standard (All Long Pin) 31 1p 12p 16p 2p 24p 32 36 37 39 5 Random sequence 357 16p 32 39 Guide Wall Type 6 Right Angle All Middle Pin 375 2p 32 37 7 Random sequence 382 1p 32 36 8 All Long Pin Offset Type 394 2p 37-2T-3F Only 9 Straddle Standard (All Long Pin) Standard (All Long Pin) 35 1p 32 36 387 8p 388 Staggered Type 1 11 SLIM type Type Sequence Contact Series No. Pin Count Mating No. Note View Page 2 Sequence 329 8p 33 12 Right Angle 2 Sequence 346 16p 3 Sequence 359 16p 347 356 347 356 13 14 3 Sequence 395 158p 347 356 15 3 I-PEX Co.,Ltd.
<RECEPTACLE> STANDARD Type Type Series No. Pin Count Mating No. Note View Page Right Angle 32 Vertical 1p 12p 16p 2p 24p 37 2p 39 16p 31 35 357 375 382 31 375 394 31 357 16 17 18 Straddle 36 1p 31 35 388 8p 387 Staggered type 19 2 SLIM type Type Series No. Pin Count Mating No. Note View Page 33 8p 329 21 22 Right Angle 347 16p Vertical 356 16p 346 359 395 346 359 395 23 24 4
MINIDOCK Standard Type PLUG Right Angle 1p/12p/16p/2p/24p All Long Pin ( Standard ) 31- ** # T - ** F 1 2 3 4 1 : 1pos 12: 12pos 16: 16pos NON Without Screw 1 POS. 2: 2pos 24: 24pos With Screw (P/N: 923-1) 1 Finish of Au Flash 4 Screw 1pos,12pos,16pos,2pos 2 Contact Area A Au.75u m Min. With Screw (P/N: 923-1) 2 3 Packaging T Tray 24pos C (AT PIN END).635 (AT PIN END) D (AT PIN END) C (AT PIN END) 2-M2.5 P.45 (SEE P/N923-1) 2.38 I J.25 9.4 A B 2-M2.5 P.45 (SEE P/N923-1) C.635 E C ORIGINAL SHAPE 2- φf 2- φn 9.9 11.13 5.57 16.9 5.6 11.3 5.4 1.5 6.35 ONLY 31-24*T-F, 31-24*T-2F (WITH GUIDE WALL TYPE) 2.37 G H D MODIFIED (BOTH SIDE) 47.5 (D DIM.) MAX. (.635x24=) 15.24 (C DIM.) (.635x24=) 15.24 (C DIM.).635.635 1- φ.5 +.1 FOOTPRINT PATTERN t=1.6±.1 (1P ONLY) 2- φ3 +.1 5 MAX. +.1 NO. of POS.- φ.5 C D.635.635 C FOOTPRINT PATTERN t=1.6±.1 (OTHERS) 2- φ3 +.1 5 PART NO. POS. A B C D E F G H I J N 31-1#T-**F 1p 51.65 42.25 15.24 47.5 37.35 38.85 2.5 2.1 3.6 φ3. φ4.2 31-12#T-**F 12p 58. 48.6 18.42 53.85 43.7 45.2 31-16#T-**F 16p 73.7 6.81 24.77 66.68 2.77 φ3.7 56. 57.9 φ4.7 3.1 2.5 31-2#T-**F 2p 83.4 74. 31.12 79.25 69.1 7.6 3.6 φ3. φ4.2 31-24#T-**F 24p 96.1 86.7 37.47 91.95 81.8 83.3 5 I-PEX Co.,Ltd.
MINIDOCK Standard Type PLUG Right Angle 16p Random Sequence Guide Wall Type 357-16T-F L-Pin (L=5.36) S-Pin (L=3.96) Screw 17,18,31,32,45,46,59,6,73,74,87,92 17,11,121,125,128,129,141,152,159 OTHERS With (P/N:923-1) 66.68 24.765 (AT PIN END) 24.765.635 (AT PIN END) (AT PIN END) (AT PIN END) 2-M2.5 P.45 2.38 3.1 2.5 16.9 5.6 11.3.25 5.4 1.5 6.35 L 73.7 2-M2.5 P.45.635 6.81 24.765 24.765 No.79 No.81 2- φ3.7 59 5.57 2.77 11.13 No.8 No.82 2.37 56. 57.9 66.68 6 MATED VIEW No.3 66.68 24.765 24.765.635 No.79.635 59 57 2- φ3 +.1 MAX. No.4 +.1 NO. of POS.- φ.5 No.8 No.81 No.82 FOOTPRINT PATTERN (t=1.6±.1) 6 58 5 6
MINIDOCK Standard Type PLUG Right Angle 2p All Middle Pin 375-2T-F Pin Type Mating Travel of Contact Screw M-Pin (L=4.66) 1.4 With (P/N:923-1) 2-M2.5 P.45 (SEE P/N923-1) 9.4 (AT PIN END) 79.25 31.12 (AT PIN END) 31.12 (AT PIN END).635 (AT PIN END) 16.9 5.6 11.3 5.4 1.5 2.38 3.1 (2.12) 2.5.25 6.35 L (CONTACT LENGTH) (1.755).635 83.4 74. 31.12 31.12 2- φ4.2 9.9 3.6 99 2- φ3. 11.13 5.57 2.37 69.1 7.6 79.25 2-M2.5 P.45 (SEE P/N923-1) P/N 375-2T-F (R/A) P/N 37-2T-**F (Vertical) MATED VIEW 79.25 31.12.635 31.12 99 2- φ3 +.1 MAX. 2- φ.5 +.1 FOOTPRINT PATTERN (t=1.6±.1) 5. 7 I-PEX Co.,Ltd.
MINIDOCK Standard Type PLUG Right Angle 1p Random Sequence 382-1T-F L-Pin (L=5.36) M-Pin (L=4.66) Screw 1,2,49~52,99,1 OTHERS With (P/N:923-1) 47.5 15.24 (AT PIN END) 15.24.635(AT PIN END) (AT PIN END) 2-M2.5 P.45 (SEE P/N923-1) 2.38 2.5 2.1 5.6 5.4 L.25 9.4 16.9 11.3 1.5 6.35 9.9 51.65 No.5 42.25 15.24 15.24.635 φ4.2 11.13 3.6 5.57 2- φ3 2-M2.5 P.45 (SEE P/N923-1) 2.37 37.35 38.85 47.5 No.51 47.5 No.5 15.24 15.24.635 No.49 2- φ3 +.1 5. MAX. 1- φ.5 +.1 FOOTPRINT PATTERN (t=1.6±.1) No.51 8
MINIDOCK Standard Type PLUG Right Angle 2p All Long Pin Offset Type 394-2T-F *To Be Mated : 37-2T-3F Only 79.25 2-M2.5 P.45 9.4 11.13 5.57 3.6.635 83.4 74. 31.12 A 2- φ3.. 2-M2.5 P.45 9.9 17.65 6.35 6.15 1.5 (2.12) 2.38 2.37 69.1 7.6 A 6.35 2.5 3.1 SECT A-A 79.25 31.12.635 2- φ3 +.1 MAX. 2- φ.5 +.1 FOOTPRINT PATTERN 5. 9 I-PEX Co.,Ltd.
MINIDOCK Standard Type PLUG Straddle 1p All Long Pin ( Standard ) 35-1T-F 47.5 2- M2.5 P.45 2.38 1.45 9.4 5.6 16.9 11.3 5.4 1.5 3. 51.65 3.6.635 15.24 42.25 15.24 2- φ3. 2-M2.5 P.45 11.13 5.57 2.37 37.35 38.85 47.5 ±.1 47.8 15.24 15.24.635.635 2- φ2.8 R.5 5. 3. 7.58 2. ±.1 R1 1. +.1 8.8 3 +.1 5.5 ±.2.51 34.54 FOOTPRINT PATTERN ( t=1.6±.1 ) 1
MINIDOCK Standard Type PLUG Straddle Staggered Type 8p All Long Pin ( Standard ) 387-8T-F 26.55 24.765.635.25 A 2-M2.5 P.45 2- φ1.5 2.38.82 17.8 4. 6.47 2.57.35 18.16 2.7 28.88 3. A.2 8.17 1. 5.77 1. 4.95 MAX 3.5 MAX 4.53 SECT A-A 1.52 3.42 2-M2.5 P.45.635 36.24 24.765 P/N 387-8T-F 4.53 6.49 8.97 11.13 5.57 3. 2.37 3.56 42.49 46.39 P/N 388-8T-F 2.5 C/T MATING LENGTH MATED VIEW.76 42.49 ±.1 3.42 1.4 R.5 C ±.1 24.765 2- φ2.8 1.52 DETAIL C.635 5. 2. 3- R1 25.185 26.34 3 +.1 5.5 +.1 1.83 ±.1 7.84 FOOTPRINT PATTERN (t=1.57±.1) (BOTH SIDES SAME PATTERN) 11 I-PEX Co.,Ltd.
MINIDOCK Slim Type PLUG Right Angle 8p 2 Sequence 329-8T- ** F PART NO. A L-Pin ( L=5.36 ) M-Pin ( L=4.66 ) BOSS NOTE 329-8T-F 2.3 With Screw (P/N:942-1) Without Boss 329-8T-1F 2.3 Without Screw 1,2,79,8 OTHERS 329-8T-2F 3.1 With Screw (P/N:942-1) With Boss 329-8T-3F 3.1 Without Screw 32. 26.55 24.765 (AT PIN END).635.25 2-M2. P.4 (AT PIN END) 12.9 9.4 L 2.46 1.46 18.16 2.7 28.88 3..25 5.46 SECT X-X 4.65 WITHOUT BOSS WITH BOSS φ2.9.8 36. 32.44 X φ2.2 No.79 6.47 8.56 5.945 7.65 4.58 6.78 X 33. 5. No.8 3-M2. P.4 14.55 1. 3.81 (AT PIN END) (AT PIN END) (AT PIN END).82 1.2 2.2~2.7 2.4~2.9 2.38 (AT PIN END) No.3 8- φ.58 ±.5 No.79 2- φa ±.1 7.34 No.4.635 24.765 32. No.8 2.3 3.81 FOOTPRINT PATTERN t=1.6 12
MINIDOCK Slim Type PLUG Right Angle 16p 2 Sequence 346-16T- ** F PART NO. L-Pin ( L=5.36 ) M-Pin ( L=4.66 ) NOTE 346-16T-F With Screw (P/N:961-1) 1,2,79,8,81,82,159,16 OTHERS 346-16T-1F Without Screw 59.12 53.8 24.77 24.77.635 2-M1.6 P.35 9.4 3.9 2.46 1.5 P/N 356-16T-F P/N 356-16T-1F 17.53 P/N 346-16T-F P/N 346-16T-1F 54.5 56. 57.12 MATED VIEW φ2.2 Z No.79 62. 58.44 3-M1.6 P.35 No.81 59 (16.8) 5.71 11.9 L (14.51) 5.95 8.56 4.58 7.6 6.78 5. Z No.8 59.4 No.82 6 9.9.25 2.5 3.1 2.38.815 SECT. Z-Z 6.35 59.12 24.77.635 No.79 No.81 24.77 59 2- φ2 +.1 5. MAX. 16- φ.5 +.1 No.8 No.82 FOOTPRINT PATTERN (t=1.6±.1) 6 13 I-PEX Co.,Ltd.
MINIDOCK Slim Type PLUG Right Angle 16p 3 Sequence 359-16T- ** F PART NO. L-Pin ( L=5.36 ) M-Pin ( L=4.66 ) S-Pin ( L=3.96 ) NOTE 359-16T-F With Screw (P/N:961-1) 77 ~ 84 OTHERS 1 ~ 4, 157 ~ 16 359-16T-1F Without Screw 9.4 3.9 2.46 1.5.635 59.12 53.8 24.77 24.77 2-M1.6 P.35 (SEE P/N 961-1) (16.8) 5.71 11.9 2.38 3.1.82 2.5.25 6.35 L (CONTACT LENGTH).635 24.77 57.12 24.77 9.9 SECT X-X 62. 58.44 (14.51) 5.95 8.56 4.58 7.6 6.78 5. φ2.2 X No.79 3-M1.6 P.35 No.81 59 P/N 356-16T-F (Vertical) or P/N 347-16T-**F (R/A) P/N 359-16T-F P/N 359-16T-1F X 24.77 24.77 59.4 No.8 No.82.635 6 MATED VIEW No.3 59.12 24.77 24.77.635 No.79.635 59 No.81 2- φ2 +.1 MAX. No.4 16- φ.5 +.1 No.8 No.82 FOOTPRINT PATTERN (t=1.6±.1) 6 5. 14
MINIDOCK Slim Type PLUG Right Angle 158p 3 Sequence 395-158T- F PART NO. L-Pin ( L=5.36 ) M-Pin ( L=4.66 ) S-Pin ( L=3.96 ) Nothing 395-158T-F 77 ~ 84 OTHERS 1 ~ 4, 157 ~ 16 8, 81.635 59.12 53.8 24.77 24.77 Y Z 2-M1.6 P.35 2.38 3.1 2.5.82 9.4 3.9 2.46 1.5.25 (16.8) 5.71 11.9 6.35 L (CONTACT LENGTH).635 Z Y 24.77 24.77 57.12 No.79 9.9 No.81 C/T NOTHING SECT. X-X φ2.2 X 62. 58.44 3-M1.6 P.35 A 59 No.8 C/T NOTHING DETAIL A No.82 (14.51) 5.95 8.56 4.58 7.6 6.78 5. X 24.77 24.77 59.4.635 6 P/N 356-16T-F (Vertical) or P/N 347-16T-**F (R/A) P/N 395-158T-F MATED VIEW No.3 24.77.635 No.79 59.12.635 No.81 24.77 59 2- φ2 +.1 MAX. No.4 16- φ.5 +.1 No.8 No.82 FOOTPRINT PATTERN (t=1.6±.1) 6 5. 15 I-PEX Co.,Ltd.
MINIDOCK Standard Type RECEPTACLE Right Angle 1p/12p/16p/2p/24p 32- ** # T - ** F 1 2 3 4 1 : 1pos 12: 12pos 16: 16pos NON Without Screw 1 POS. 2: 2pos 24: 24pos 1 With Screw (P/N: 923-1) Finish of Au Flash 4 Screw 2 Contact Area A Au.75u m Min. With Screw (P/N: 923-1) 2 3 Packaging T Tray Guide Pin 14.mm (16p Only) 2.38 N 2-M2.5 PO.45 (SEE P/N923-1) M G 9.4 K 2.3 11.3 1.5.25 9 6.35 2-M2.5 PO.45 (SEE P/N923-1) φf.635 C 6.1 B A.635 C φ3.6 (9.7) 47.5 (D DIM.) (.635x24=) 15.24 (C DIM.) (.635x24=) 15.24 (C DIM.).635.635 2- φ3 +.1 E 11.13 5.57 2.37 MAX. 1- +.1 φ.5 D C.635.635 FOOTPRINT PATTERN t=1.6±.1 (1P ONLY) C 2- φ3 +.1 2.49 3.6 2.49 H J D 7.9 MAX. 9.7 NO. OF POS. - φ.5 +.1 FOOTPRINT PATTERN t=1.6±.1 (OTHERS) 5 PART NO. POS. A B C D E F G H J K M N 32-1#T-**F 1p 51.65 42.25 15.24 47.5 37.35 38.85 2.8 2.8 3.6 φ2.9 14. 32-12#T-**F 12p 58. 48.6 18.42 53.85 43.7 45.2 32-16#T-**F 19. 2.5 16p 73.7 6.81 24.77 66.68 2.77 φ3.6 56. 57.9 32-16#T-2F 14. 2.5 3.1 32-2#T-**F 2p 83.4 74. 31.12 79.25 68.58 7.6 32-24#T-F 3.6 φ2.9 14. 2.5 24p 96.1 86.7 37.47 91.95 81.8 83.3 32-24#T-1F 5.3 16
MINIDOCK RECEPTACLE 2p Standard Type Vertical 37-2T- ** F PART NO. G NOTE 37-2T-F 5.7 37-2T-3F 6.45 To Be Mated 394 14. 2.5 G 6.16 2.5 9. 15.16 φ2.9 74. 83.4 11.13 5.57 3.6.635 31.12.635 31.12 2- M2.5 P.45 9.7 66.5 68.58 79.25 79.25 31.12 31.12.635.635 2- φ3 +.1 NO OF POS.- φ.5 +.1 FOOTPRINT PATTERN t=1.6±.1 5.57 17 I-PEX Co.,Ltd.
MINIDOCK RECEPTACLE 16p Standard Type Vertical 39-16T- F φ.8 6.81 5.7 19 5.83 1.2 16.3 3.3 3.6 6.81 73.7 (.635x39=) 24.765 (.635x39=) 24.765.635 2.77 2-M2.5 PO.45 11.13 5.57 9.7 53.8 56 66.68 66.68 6.81 24.765 24.765.635 φ.9 +.1 2-φ3 +.1 16- φ.5 +.1 FOOTPRINT PATTERN (t=1.6±.1) 5.57 5.7 18
MINIDOCK RECEPTACLE 1p Standard Type Straddle 36-1T- F 47.5 2-M2.5 P.45 2.38 14. 2.5 9.4 3.6 2.3 9 11.3 1.5 φ2.9 42.25 15.24 51.65 15.24.635.635 2-M2.5 P.45 2.37 11.13 5.57 37.35 38.85 47.5 47.5 ±.1 R.5 15.24 15.24.635.635 φ2.8 ±.1 2 7.58 5 3 ±.1 R1 5.5 8.8 1 +.1 +.1 3 ±.2.51 34.54 FOOTPRINT PATTERN 19 I-PEX Co.,Ltd.
MINIDOCK Standard Type RECEPTACLE Straddle Staggered Type 8p 388-8T- F 46.39 42.49 26.55 24.765.635.25 A 2- M25 P.45 2- φ1.5.82 2.38 (21.6) 8.97 12.9 26.15 28.75 A 4 φ2 φ3.5 6.58 2.46 14 9.5 MAX 4.95 MAX 3.5 SECT A-A 6.49 1.52 3.42 36.24 24.765 P/N 387-8T-F.635 4.53 6.49 2- M25 P.45.35 11.13 5.57 3 2.37 42.49.76 3.42 1.4 2.5 8.97 MATED VIEW P/N 387-8T-F C/T MATING LENGTH ±.1 42.49 R. 5 C ±.1 24.765 2- φ2.8 5 1.52 DETAIL C.635 2 3- R1 25.185 26.34 3 5.5 +.1-1.83 +.1-7.61 ±.1 FOOTPRINT PATTERN (T=1.57±.1) (BOTH SIDES SAME PATTERN) 2
MINIDOCK RECEPTACLE 8p Slim Type Right Angle 33-8T- ** F 32 26.55 24.765 B 3.3.635.25 2-M2. P.4 4.65 11.78 2.46 1.46 12.9 9.4 C 5.225 8.97 B 33.15 WITHOUT GUIDE PIN X 26.15 28.7 32.44 X φ2 MATED VIEW.4MIN. 36 32.44 8.97 8.56 5.945 7.65 4.58 6.78 14.55 7.9.82 2.38 5.225 WITHOUT GUIDE PIN 33 3-M. P.4 3.81 2.2~2.5 2.5~2.8 WITHOUT GUIDE PIN 8- φ.58 2- φa ±.1 7.34.635 ±.1 24.765 2.3 3.81 ±.1 32 FOOTPRINT PATTERN t=1.6 21 I-PEX Co.,Ltd.
PART NO. Guide Pin Type BOSS A B C NOTE 33-8T-**F 33-8T-F TAPER TOP With Screw ( P/N : 942-1) 33-8T-1F SPHERE TOP 15.5 33-8T-2F TAPER TOP Without BOSS 2.3 Without Screw 33-8T-3F SPHERE TOP 33-8T-4F Without Guide Pin With Screw ( P/N : 942-1) - 33-8T-5F Without Nut, Washer Without Screw 33-8T-6F TAPER TOP With Screw ( P/N : 942-1) 33-8T-7F SPHERE TOP 15.5 33-8T-8F TAPER TOP With BOSS 3.1 Without Screw 33-8T-9F SPHERE TOP 33-8T-1F Without Guide Pin 2.4 With Screw ( P/N : 942-1) - 33-8T-11F Without Nut, Washer Without Screw 33-8T-12F With Screw ( P/N : 942-1) Without BOSS 2.3 33-8T-13F Without Screw 2'nd SPHERE TOP 15.5 33-8T-14F With Screw ( P/N : 942-1) With BOSS 3.1 33-8T-15F Without Screw 33-8T-16F SPHERE TOP 13. 33-8T-17F 33-8T-18F TAPER TOP (MTL:STAINLESS STEEL) SPHERE TOP (MTL:STAINLESS STEEL) Without BOSS 33-8T-19F SPHERE TOP With BOSS 3.1 14. 4. With Screw ( P/N : 942-1) 2.3 15.5 Without Screw DETAIL X GUIDE PIN TYPE TAPPER TOP SPHERE TOP 2nd SPHERE TOP.8 φ2.9 WITHOUT BOSS WITH BOSS 22
MINIDOCK RECEPTACLE 16p Slim Type Right Angle 347-16T- ** F PART NO. NOTE Guide Pin Type 347-16T-F 347-16T-2F 347-16T-4F With Screw ( P/N : 961-1) With Screw ( P/N : 961-1) With Screw ( P/N : 961-1) 347-16T-1F 347-16T-3F 347-16T-5F Without Screw Without Screw Without Screw TAPER TOP SPHERE TOP 2'nd SPHERE TOP.635 59.12 53.8 24.77 24.77 2- M1.6 P.35 (SEE P/N 961-1) DETAIL A TAPER TOP GUIDE PIN TYPE 15.5 11.9 9.4 1.5 SPHERE TOP 2nd SPHERE TOP φ2 53.41 62 A 59 No.81 58.44 55.8 3- M1.6 P.35 No.79 (2.9) 9. (11.9) 7.8 2.5 (14.51) 5.95 8.56 7.6 4.58 6.78 6 No.82 59.4 No.8 59.12 9.7 9.7 7.9 6.35.25.82 2.5 3.1 2.38 24.77.635 24.77.635 2- φ2 +.1 MAX. 16- φ.5 +.1 FOOTPRINT PATTERN (t=1.6±.1) 5. 23 I-PEX Co.,Ltd.
MINIDOCK Slim Type RECEPTACLE Vertical 16p 356-16T- ** F PART NO. 356-16T-F 356-16T-1F NOTE With Screw (P/N:961-1) Without Screw.635 24.765 24.765.25 15.5 7.3 1.2 16.3 3.3 59 φ2 53.41 62 58.44 55.8 53.8 No.81 No.79 (14.51) 5.95 8.56 7.6 6.78 2- M1.6 P.35 6 No.82 53.8 59.4 No.8 9.7 P/N 356-16T-F P/N 356-16T-1F 17.53 MATED VIEW P/N 346-16T-F P/N 346-16T-1F P/N 359-16T-F P/N 359-16T-1F P/N 395-16T-F 59.4 59 24.765.635 No.81 No.79 24.765 2- φ2 +.1 8.56 6 16- φ.5 +.1 No.82 No.8 FOOTPRINT PATTERN (t=1.6±.1) 5.95 24
Addendum Screw Overview PART NO. Drawing Adaptation 31-***T-**F M2.5 P.45 32-***T-**F 923-1 φ3.4 357-16T-F.5 MAX 375-2T-F 2.4 1.3 5. 382-1T-F M2. P.4 329-8T-**F 942-1 φ4. 33-8T-**F 2.2 1.46 5. 961-1 1.5 φ3. (φ3.2 MAX) R2.5 1.3 5. M1.6 P.35 346-16T-**F 347-16T-**F 356-16T-**F 359-16T-**F 25 I-PEX Co.,Ltd.
~ MEMO ~ 26
MINIDOCK SERIES CONNECTORS I-PEX Co.,Ltd. Head e Of S i K TEL T N HKon ei n g apo A Product design and specification is subject to change for improvement without notice in advance. Please inquire to I-PEX representative for your confirmation. 26 I-PEX Co., Ltd. 26/7