F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between - C and + C mbient temperature between - C and + C Max. pressure in pump body bar (PN) Continuous service S CONSTRUCTION ND SFETY STNDRDS EN - EN - IEC - IEC - CEI - CEI - Pump body dimensions in compliance with EN EU REGULTION N. / INSTLLTION ND USE Water supply Pressure boosting Irrigation Water circulation in airconditioning units Cleaning sets gricultural Firefighting sets Industrial applications applications The pump should be installed in an enclosed environment or sheltered from inclement weather. OPTIONS VILLE ON REUEST Counter flange KIT complete with bolts, nuts and washers Other voltages or Hz frequency Compatibility with hotter or colder liquids Compatibility with hotter or colder environments CERTIFICTIONS Company with management system certified DNV ISO : ULITY ISO : ENVIRONMENT
PERFORMNCE RNGE Hz n= rpm Head H (metres) / / / / / / / / / / / / / / / / / / / / F l/min Flow rate PERFORMNCE DT Hz n= rpm POWER (P) PERFORMNCE Three-phase kw HP l/min F-/.... IE F-/.. F-/.. IE F-/... F-/ H... IE F-/ H.. F-/C... F-/. IE.. F-/... F-/.... IE F-/... F-/.. IE F-/... F-/ C... F-/. IE. F-/. F-/.. IE F-/.. F-/.. IE F-/.... F-/ C.. F-/.. IE F-/.. F-/ R. F-/ D... F-/ C. F-/. IE. F-/. F-/ R. POWER (P) PERFORMNCE Three-phase kw HP l/min F-/.. IE F-/... F-/ C... F-/. IE.. F-/.. F-/.. IE F-/ R F-/... IE F-/... F-/ D... F-/ C... IE F-/.. F-/. F-/. IE F-/.... F-/.... IE F-/. F-/-N... IE F-/-N.. F-/ C.. F-/.. IE.. F-/.... F-/... IE F-/... = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO Grade. Performance class of the three-phase motor (IEC--)
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw).... MEI. F-/ η = %..... P (HP) NPSH () H () l/min Flow rate POWER (P).... Three-phase kw HP l/min F-/........ F-/...... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw). MEI. F-/ η = %. l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/.... F-/..,... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/H CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/H F Head H (metres) bsorbed power P (kw).... MEI. F-/H Flow rate η = % H H.... l/min P (HP) NPSH () H () POWER (P)..... Three-phase kw HP l/min F-/H...... F-/H....... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw). MEI. F-/ F-/ F-/C. C F η =.% l/min P (HP) NPSH () H () Flow rate POWER (P)..... Three-phase kw HP l/min F-/C....... F-/......... F-/......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw)...... MEI. F-/ l/min η = %.... P (HP) NPSH () H () Flow rate POWER (P). Three-phase kw HP l/min F-/........ F-/......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw). MEI. F-/ l/min η = %. P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/...... F-/....... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) F-/ F-/ F-/C MEI. l/min η = %. C F P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C........ F-/..... F-/...... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw).... F-/ MEI.. Flow rate η = %,,, l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/......... F-/.......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ η = % Head H (metres) bsorbed power P (kw).. MEI. Flow rate. l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/........... F-/............. = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/R Head H (metres) bsorbed power P (kw) MEI. F-/ F-/ F-/C η = % C R P (HP) NPSH () H () l/min Flow rate POWER (P) Three-phase kw HP l/min F-/C..... F-/....... F-/....... F-/R...... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) MEI. F-/R F-/ F-/ F-/C F-/D η = % D R C F l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/D........... F-/C......... F-/.......... F-/......... F-/R...... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F Head H (metres) bsorbed power P (kw).. MEI. F-/ F-/ η = % l/min.. P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/......... F-/.......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/ Head H (metres) bsorbed power P (kw) F-/ F-/C MEI. η = % C l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C......... F-/.......... F-/......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/R Head H (metres) bsorbed power P (kw) F-/ MEI. l/min η = % R P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/......... F-/R.......... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F-/ F Head H (metres) bsorbed power P (kw) MEI. η = % l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/............. F-/.............. = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F- / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F-/ F Head H (metres) bsorbed power P (kw) MEI. F-/C F-/D η = % l/min C D P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/D........... F-/C.......... F-/.......... F-/...... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ Head H (metres) bsorbed power P (kw) MEI. η = % P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/....... F-/............ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) MEI. F-/ F-/ Flow rate η = % F l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/........... F-/..... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/-N F-/-N F Head H (metres) bsorbed power P (kw) MEI. η = % P (HP) NPSH () H () l/min Flow rate POWER (P) Three-phase kw HP l/min F-/-N........ F-/-N....... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ Head H (metres) bsorbed power P (kw) MEI. F-/C η = % C l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C.......... F-/............. F-/............ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/ Head H (metres) bsorbed power P (kw) MEI. F-/ η = % P (HP) NPSH () H () Flow rate l/min POWER (P) Three-phase kw HP l/min F-/............ F-/............ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
F POS. COMPONENT CONSTRUCTION CHRCTERISTICS PUMP ODY Cast iron, complete with flanged suction and delivery ports ODY CKPLTE Cast iron rass for F-/, /, /, /, /, / IMPELLER Cast iron for F-/, /, /, /, /, /, /, /, F-/, /, /, /, /, / MOTOR SHFT Stainless steel EN - -. MECHNICL SEL Pump Seal Shaft Materials Model Model Diameter Stationary ring Rotational ring Elastomer F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ F-/ F-/ FN- NU Ø mm Graphite Ceramic NR F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ FN- NU Ø mm Graphite Ceramic NR F-/ F-/ FH- NU Ø mm Graphite Ceramic NR ERINGS Pump Model Pump Model F-/ F-/ F-/ F-/ F-/ F-/ F-/ ZZ-C / ZZ ZZ-C / ZZ-C F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ ELECTRIC MOTOR F: with poles three-phase / V - Hz The three-phase pumps are fitted with high performance motors up to P=. kw in class IE and from P=. kw in class IE (IEC -) Insulation: class F Protection: IP ZZ-C / ZZ-C ZZ-C / ZZ-C
F DIMENSIONS ND WEIGHT a DN f n h DN h h w w n n s DIMENSIONS mm kg Three-phase DN DN a f h h h n n n w w s F-/. F-/. F-/. F-/. F-/H. F-/H. F-/C. F-/.. F-/. F-/. F-/. F-/. F-/. F-/C. F-/... F-/. F-/. F-/. F-/. F-/. F-/C. F-/. F-/. F-/R. F-/D. F-/C. F-/... F-/. F-/R. F-/. F-/. F-/C. F-/... F-/. F-/. F-/R. F-/. F-/. F-/D. F-/C. F-/... F-/. F-/. F-/. F-/. F-/. F-/-N. F-/-N. F-/C. F-/. F-/. F-/. F-/.
FLNGED PORTS COUNTER FLNGES (CN E ORDERED SEPRTELY) DN K D F K D DN FLNGES D K HOLES mm mm mm N. Ø (mm) DN FLNGES F D K HOLES mm COUNTER FLNGES mm mm N. Ø (mm) ¼ ½ ½ SORPTION VOLTGE Three-phase V V F-/.. F-/.. F-/.. F-/.. F-/H.. F-/H.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/C.. F-/.. F-/.. F-/R.. F-/D.. F-/C.. F-/.. F-/.. F-/R.. VOLTGE Three-phase V V F-/.. F-/.. F-/C.. F-/.. F-/.. F-/.. F-/R.. F-/.. F-/.. F-/D.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/-N.. F-/-N.. F-/C.. F-/.. F-/.. F-/.. F-/..