[3.2] 38.0[4.3] [12.9] , [.71] [.00021].8[.09] 13.2[6.0] 230

Σχετικά έγγραφα
8" Frame Brushless Servo Motor. 230 Series TORQUE RANGE: IN-LBS Nm. Motor Data (Trap)

Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1

DC040B Series Salient Characteristics

DC SERVO MOTORS. EC057B Series Salient Characteristics E E

DC SERVO MOTORS Previous N23XX Series. EC057C Series Salient Characteristics

ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA

DC054B Series Salient Characteristics

Siemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)

14 mm sq inch sq.

Dimensions in inches (mm)

Metal Oxide Leaded Film Resistor

Carbon Film Leaded Resistor

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

Metal Oxide Leaded Film Resistor

Submersible MOTORS PRODUCT CATALOGUE

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008

S /5000 BTU/Hr. 1000/1500 Watt

Westfalia Bedienungsanleitung. Nr

Metal Film Leaded Precision Resistor

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.

Metal Film Leaded Precision Resistor

No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor

Karta Katalogowa CATALOGUE CARD

SIEMENS Squirrel Cage Induction Standard Three-phase Motors

3M-Series Miniature Pushbutton Switches

LO-COG DC Gearmotors. BULLETIN LCG Series GM8000, GM9000, GM14900

Bulletin 1489 UL489 Circuit Breakers

ECOL Motors In Aluminum Housing

DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE

PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V

Precision Metal Film Fixed Resistor Axial Leaded

65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC

WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE

IDPV-45 series. 45W PWM Output LED Driver. File Name:IDPV-45-SPEC S&E

TRC ELECTRONICS, INC LED Driver Constant Voltage 45W MEAN WELL IDLV-45 Series

Metal Film Flame-Proof Resistors

RSDW08 & RDDW08 series

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Three-phase HV and LV asynchronous induction motors with squirrel-cage rotor and slip-ring rotor

ΠΡΟΣΚΛΗΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ KAI ΚΑΤΑΘΕΣΗΣ ΠΡΟΣΦΟΡΩΝ ΓΙΑ ΤΗΝ ΑΝΑΘΕΣΗ ΤΗΣ ΠΡΟΜΗΘΕΙΑΣ

No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor

60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC

65W PWM Output LED Driver. IDPV-65 series. File Name:IDPV-65-SPEC

Technical Report. General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor

THICK FILM LEAD FREE CHIP RESISTORS

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

IDPV-25 series. 25W PWM Output LED Driver. File Name:IDPV-25-SPEC S&E

E62-TAB AC Series Features

Rod End > Spherical Bearings Product Overview

OWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC

4 Way Reversing Valve

Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.

SMBJ SERIES. SMBG Plastic-Encapsulate Diodes. Transient Voltage Suppressor Diodes. Peak pulse current I PPM A with a 10/1000us waveform See Next Table

High pressure centrifugal pumps

Aluminum Electrolytic Capacitors

DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue

Aluminum Capacitors C, Tubular, Radial Lead

ROTARY TABLE SELECTION GUIDE

Aluminum Electrolytic Capacitors (Large Can Type)

Submittal Data Sheet Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator

NPN Silicon RF Transistor BFQ 74

motori elettrici electric motors

+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors

PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life

Single-channel Safety Barriers Series 9001

IE3 IE2. 100% From Europe. Squirrel-Cage Low Voltage Motor. Premium Efficiency. High Efficiency. Made in Europe. Converter fed Motor.

DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE

Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1

Study on Re-adhesion control by monitoring excessive angular momentum in electric railway traction

Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS

HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices

Safety Barriers. 6 Safety Barriers KP00 III en Preferred products in stock or available at short notice

Engineer Reference 1 / / A 35 7/16 X 7 7/8 X 23 5/8 31 1/8 X 21 7/8 X 11 1/4 14 T T 75 R410A oz/ft over 50' 265 / 318 / 388

SPBW06 & DPBW06 series

COPELAND SCROLL AIR COOLED CONDENSING UNITS

IXBH42N170 IXBT42N170

SMC SERIES Subminiature Coaxial Connectors

Return Line Filters Type RTF10/25

Metal Oxide Varistors (MOV) Data Sheet

NPN SILICON OSCILLATOR AND MIXER TRANSISTOR

SMC SERIES Subminiature Coaxial Connectors

Magnet Wire General Engineering Data Bare and Film Insulated Copper and Aluminum

CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

E62 AC Series Features

PowerFlex 700S ( 9-13) - Phase II. Phase II 9-13 PowerFlex 700S. PowerFlex 700S

Technical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%

Transient Voltage Suppressor

Chilisin Electronics Singapore Pte Ltd

Return Line Filters. Return Line Filters Type RTF10/25. C Technology. Filtration. Product Description. Technical Data. Options and Accessories

NMBTC.COM /

Thin Film Chip Resistors

Industrial Pressure Transmitter

Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz

GenX3 TM 300V IGBT IXGA42N30C3 IXGH42N30C3 IXGP42N30C3 V CES = 300V I C110. = 42A V CE(sat) 1.85V t fi typ. = 65ns

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)

INVERTER STUDER INNOTEC Inverter Studer-AJ275

BMA SERIES Subminiature Blind Mate Connectors

Transcript:

Series TORQUE RANGE: 38-116.2 IN-LBS 4.3-13.1 Nm Motor Data (Trap) Motor Parameters Units 1140ATG**** 1140BTG**** 1141ATG**** 1141BTG**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP[Nm/AMP] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 3800 28.0[] 6.0 18.0 6.2[.71] 15.3.76.56 1900 1400 34.0[3.8] 3.0 9.0 13.1 64.6 1.6 45.0[5.1] 8.7 30.5 6.2[0.71].82 6.1 1.2.88 50.0[5.6] 4.4 15.3 24.4 Motor Parameters Units 1142ATG**** 1142BTG**** 1143ATG**** 1143BTG**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP[Nm/AMP] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 2.5 69.1[7.8] 13.4 46.8 6.2[0.71].40 2.8 75.0[8.4] 6.7 23.4 12.6 4.6 3.4 96.8[10.9] 18.7 65.6 6.2[0.71].27 2.0 [0.2] 2.4 104.0[11.7] 9.4 32.8 1.1 8.1 [0.2] Brake Info: Min. Holding Torque: 240 IN-LBS Input Voltage: 24VD urrent :.88 Inertia:.000412 IN-LB-SE 2 Weight Adder: 6 LBS *25 Ambient with a maximum case temperature of 100 on motor. Motor mounted on a 12 x 12 x 1/2 aluminum heatsink. Thermostat in stator windings will open if winding temperature exceeds 155. This allows +10% headroom in the continuous torque rating before thermostat opens. Mechanical Notes: 1. Axial Load: 50 LBS. Max. 2. Radial Load: 100 LBS. Max. @ 1 from face 3. Motor Sealed to IP65 MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

Series TORQUE RANGE: 38-116.2 IN-LBS 4.3-13.1 Nm Motor Data (Sine) Motor Parameters Units 1140ASG**** 1140BSG**** 1141ASG**** 1141BSG**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP(RMS/φ)[Nm/AMP(RMS/φ)] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 3800 28.0[] 4.2 12.7 8.8[.99] 15.3.76.56 1900 1400 34.0[3.8] 6.4 13.1 64.6 1.60 45.0[5.1] 6.2 21.6 8.8[.99] 0.83 6.1 1.2.88 50.0[5.6] 3.1 10.8 24.4 Motor Parameters Units 1142ASG**** 1142BSG**** 1143ASG**** 1143BSG**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP(RMS/φ)[Nm/AMP(RMS/φ)] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 2.5 69.1[7.8] 9.5 33.1 8.8[.99].40 2.8 3 75.0[8.4] 4.7 16.5 12.6 4.6 3.4 96.8[10.9] 1 46.4 8.8[.99].27 2.0 [0.2] 2.4 104.0[11.7] 6.6 2 1.1 8.1 [0.2] Brake Info: Min. Holding Torque: 240 IN-LBS Input Voltage: 24VD urrent :.88 Inertia:.000412 IN-LB-SE 2 Weight Adder: 6 LBS *25 Ambient with a maximum case temperature of 100 on motor. Motor mounted on a 12 x 12 x 1/2 aluminum heatsink. Thermostat in stator windings will open if winding temperature exceeds 155. This allows +10% headroom in the continuous torque rating before thermostat opens. Mechanical Notes: 1. Axial Load: 50 LBS. Max. 2. Radial Load: 100 LBS. Max. @ 1 from face 3. Motor Sealed to IP65 MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

Series TORQUE RANGE: 38-116.2 IN-LBS 4.3-13.1 Nm Motor Data (Trap) Motor Parameters Units 1140TJ**** 1140DTJ**** 1141TJ**** 1141DTJ**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP[Nm/AMP] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 3800 28.0[] 3.0 9.0 12.0 64.0.76.56 1900 1400 34.0[3.8] 1.5 4.5 24.7[2.79] 49.0 2 1.6 45.0[5.1] 4.4 15.3 24.0 1.2.88 50.0[5.6] 2.2 7.6 24.7[2.79] 1 99.0 Motor Parameters Units 1142TJ**** 1142DTJ**** 1143TJ**** 1143DTJ**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP[Nm/AMP] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 2.5 69.1[7.8] 6.7 23.4 1 1.40.[16] 75.0[8.4] 11.7 24.7[2.79] 6.3 47.4 4.6 3.4 96.8[10.9] 9.4 32.8 7.8 [0.2] 2.4 104.0[11.7] 4.7 16.4 24.7[2.79] 3.9 29.6 [0.2] Brake Info: Min. Holding Torque: 240 IN-LBS Input Voltage: 24VD urrent :.88 Inertia:.000412 IN-LB-SE 2 Weight Adder: 6 LBS *25 Ambient with a maximum case temperature of 100 on motor. Motor mounted on a 12 x 12 x 1/2 aluminum heatsink. Thermostat in stator windings will open if winding temperature exceeds 155. This allows +10% headroom in the continuous torque rating before thermostat opens. Mechanical Notes: 1. Axial Load: 50 LBS. Max. 2. Radial Load: 100 LBS. Max. @ 1 from face 3. Motor Sealed to IP65 MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

Series TORQUE RANGE: 38-116.2 IN-LBS 4.3-13.1 Nm Motor Data (Sine) Motor Parameters Units 1140SJ**** 1140DSJ**** 1141SJ**** 1141DSJ**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP(RMS/φ)[Nm/AMP(RMS/φ)] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 3800 28.0[] 6.4 12.0 64.0.76.56 1900 1400 34.0[3.8] 1.1 34.9[3.94] 222.0 49.0 2 1.6 45.0[5.1] 3.1 10.8 24.0 1.2.88 50.0[5.6] 1.6 5.4 34.9[3.94] 1 99.0 Motor Parameters Units 1142SJ**** 1142DSJ**** 1143SJ**** 1143DSJ**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous Line urrent Peak urrent Max. Theoretical Accel. RAD/SE 2 Torque Sensitivity Kt IN-LBS/AMP(RMS/φ)[Nm/AMP(RMS/φ)] D.. Resistance (P-P) ±10% OHMS Rotor Inertia Jm IN-LBS-SE 2 [Kg-M 2 ] Static Friction Tf VA 2.5 69.1[7.8] 4.7 16.5 1 75.0[8.4] 2.3 8.3 34.9[3.94] 6.3 47.4 4.6 3.4 96.8[10.9] 6.6 2 7.8 [0.2] 2.4 104.0[11.7] 11.6 34.9[3.94] 3.9 29.6 [0.2] Brake Info: Min. Holding Torque: 240 IN-LBS Input Voltage: 24VD urrent :.88 Inertia:.000412 IN-LB-SE 2 Weight Adder: 6 LBS *25 Ambient with a maximum case temperature of 100 on motor. Motor mounted on a 12 x 12 x 1/2 aluminum heatsink. Thermostat in stator windings will open if winding temperature exceeds 155. This allows +10% headroom in the continuous torque rating before thermostat opens. Mechanical Notes: 1. Axial Load: 50 LBS. Max. 2. Radial Load: 100 LBS. Max. @ 1 from face 3. Motor Sealed to IP65 MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

NPT Motor "K (0.05).002 A "A" 3/4" NPT 1/2" NPT "B "J" "D" " "E" HOT SURFAE LABEL "M "F".004 A "G" "L" (0.10).004 A "N (0.10) 4 (114) English and Metric NPT Termination-Option 3 Motors Model A B D E F G MPM1140***6***.6245 (15.862).1890 (4.801).509 (12.93) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).6241 (15.852).1875 (4.763) 6 (47.1) MPM1140***7*** 18.999 (.7480) 5.99 (.236) 15.49 (.610) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 18.987 (.7475) 5.97 (.235) 49.5 (1.95) MPM1141***6***.6245 (15.862).1890 (4.801).509 (12.93) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).6241 (15.852).1875 (4.763) 6 (47.1) MPM1141***7*** 18.999 (.7480) 5.99 (.236) 15.49 (.610) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 18.987 (.7475) 5.97 (.235) 49.5 (1.95) MPM1142***6***.8750 (22.225).1890 (4.801).774 (19.65) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).8745 (22.212).1875 (4.763) 6 (47.1) MPM1142***7*** 24.000 (.9449) 7.998 (.3149) 19.90 (.784) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 23.988 (.9444) 7.963 (.3135) 49.5 (1.95) MPM1143***6***.8750 (22.225).1890 (4.801).774 (19.65) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).8745 (22.212).1875 (4.763) 6 (47.1) MPM1143***7*** 24.000 (.9449) 7.998 (.3149) 19.90 (.784) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 23.988 (.9444) 7.963 (.3135) 49.5 (1.95) ` Model J K L L w/ Brake M N MPM1140***6*** 1.71 (43.4) 3/8-16 UN-2B THRU (4) EQ SPD 9.05 (229.9) Max 15 (280.7) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1140***7*** 43.4 (1.71) 9.18 (.362) THRU (4) EQ SPD 229.4 (9.03) Max 280.2 (13) 0 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1141***6*** 1.71 (43.4) 3/8-16 UN-2B THRU (4) EQ SPD 10.30 (261.6) Max 12.30 (312.42) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1141***7*** 43.4 (1.71) 9.18 (.362) THRU (4) EQ SPD 26 (10.28) Max 311.9 (12.28) 0 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1142***6*** 1.71 (43.4) 3/8-16 UN-2B THRU (4) EQ SPD 12.80 (325.1) Max 14.80 (375.92) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1142***7*** 43.4 (1.71) 9.18 (.362) THRU (4) EQ SPD 324.5 (12.78) Max 375.4 (14.78) 0 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1143***6*** 1.71 (43.4) 3/8-16 UN-2B THRU (4) EQ SPD 15.30 (388.6) Max 17.30 (439.42) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1143***7*** 43.4 (1.71) 9.18 (.362) THRU (4) EQ SPD 388.0 (15.28) max 438.9 (17.28) 0 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) English = 6 Metric = 7 For Mechanical Dimensions on Termination Option 2 onsult Factory. MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

onnectorized Motor "K PT02E-14-18P(027) MATING ONNETOR PT06E-14-18S (476) "J" PT02E-14-5P(027) MATING ONNETOR PT06E-14-5S (476) (.002) 0.05 -A- "B "A" "H "D" "M " "G" "E" "F" "L" 0.10 (.004) A "N 0.10 (.004) A 4 (114) English and Metric onnectorized Termination-Option 1 Motors Model A B D E F G MPM1140***6***.6245 (15.862).1890 (4.801).509 (12.93) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).6241 (15.852).1875 (4.763) 6 (47.1) MPM1140***7*** 18.999 (.7480) 5.99 (.236) 15.49 (.610) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 18.987 (.7475) 5.97 (.235) 49.5 (1.95) MPM1141***6***.6245 (15.862).1890 (4.801).509 (12.93) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).6241 (15.852).1875 (4.763) 6 (47.1) MPM1141***7*** 18.999 (.7480) 5.99 (.236) 15.49 (.610) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 18.987 (.7475) 5.97 (.235) 49.5 (1.95) MPM1142***6***.8750 (22.225).1890 (4.801).774 (19.65) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).8745 (22.212).1875 (4.763) 6 (47.1) MPM1142***7*** 24.000 (.9449) 7.998 (.3149) 19.90 (.784) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 23.988 (.9444) 7.963 (.3135) 49.5 (1.95) MPM1143***6***.8750 (22.225).1890 (4.801).774 (19.65) 1.5 (38.1) Min.10 (2.5).53 (13.5) 1.90 (48.2).8745 (22.212).1875 (4.763) 6 (47.1) MPM1143***7*** 24.000 (.9449) 7.998 (.3149) 19.90 (.784) 37.0 (1.46) Min 3.0 (.12) 13.0 (.51) 50.5 (1.99) 23.988 (.9444) 7.963 (.3135) 49.5 (1.95) Model H J K L L w/ Brake M N MPM1140***6*** 2.8 (71) Max 1.5 (38.0) 3/8-16 UN-2B THRU (4) EQ SPD 7.36 (186.9) Max 9.36 (237.7) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1140***7*** 71 (2.8) Max 38.0 (1.5) 9.18 (.362) THRU (4) EQ SPD 186.4 (7.34) Max 237.2 (9.34) 1 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1141***6*** 2.8 (71) Max 1.5 (38.0) 3/8-16 UN-2B THRU (4) EQ SPD 8.61 (218.7) Max 10.61 (269.5) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1141***7*** 71 (2.8) Max 38.0 (1.5) 9.18 (.362) THRU (4) EQ SPD 218.2 (8.59) Max 269.0 (10.59) 1 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1142***6*** 2.8 (71) Max 1.5 (38.0) 3/8-16 UN-2B THRU (4) EQ SPD 11.11 (282.2) Max 13.11 (333.0) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1142***7*** 71 (2.8) Max 38.0 (1.5) 9.18 (.362) THRU (4) EQ SPD 281.7 (19) Max 332.5 (13.09) 1 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) MPM1143***6*** 2.8 (71) Max 1.5 (38.0) 3/8-16 UN-2B THRU (4) EQ SPD 13.61 (345.7) Max 15.61 (396.5) AS SHOWN ON 5.875 (149.23) B.. 4.499 (114.27) MPM1143***7*** 71 (2.8) Max 38.0 (1.5) 9.18 (.362) THRU (4) EQ SPD 345.2 (13.59) Max 396.0 (15.59) 1 (4.331) 114.3 (4.50) AS SHOWN ON 130.00 (5.118) B.. 109.98 (4.330) English = 6 Metric = 7 For Mechanical Dimensions on Termination Option 2 onsult Factory. MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

Termination 4" Motor with Encoder Feedback Option 1 Option 2 Motor onnector 270-00026 (PT02E-14-5P(027)) A φr RED B φs BLAK φt BLUE D PE GND GRN/YEL E - - Encoder onnector 270-00024 (PT02E-14-18P(027)) T GND BLAK K +5VD RED B H A BLUE H A\ BLUE/BLK N H B GREEN P H B\ GRN/BLK M H Z YELLOW U H Z\ YEL/BLK E H U BROWN R H U\ BRN/BLK F H V GRAY S H V\ GRAY/BLK G H W WHITE H H W\ WHT/BLK D GND/ABLE SHLD A THERM BLAK L THERM BLAK J GND GRN/YEL Motor Brake onnector 270-00256 (BEGA089NN0000001) 1 φr (U1) RED 2 PE GND GRN/YEL 3 φt (W1) BLUE 4 φs (V1) BLAK *A BRK (+) DIODE *B BRK ( ) 1N4007 THERM BLAK D THERM BLAK * USE ONLY WITH BRAKE OPTION Encoder onnector 270-00257 (AEGA052NN0000001) 1 GND (OV) BLAK 2 H A\ (A) BLUE/BLK 3 H A (A\) BLUE 4 H B (B) GREEN 5 H B\ (B\) GRN/BLK 6 H Z (Z) YELLOW 7 H Z\ (Z\) YEK/BLK 8 +5V (+5V) RED 9 - - 10 H U (RLG U) BROWN 11 H V (RLG V) GRAY 12 H W (RLG W) WHITE Option 1 with brake Motor Brake onnector 270-00032 (PT02E-16-8P(027)) A φr RED B φs BLAK φt BLUE D PE GND GRN/YEL E BRK SHLD - F BRK (+) DIODE G BRK ( ) 1N4007 H - - Option 3-onsult Factory MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.

Termination 4" Motor with Resolver Feedback Option 1 Option 2 Option 3 Motor onnector 270-00026 (PT02E-14-5P(027)) A φr RED B φs BLAK φt BLUE D PE GND GRN/YEL E - - Resolver onnector 270-00024 (PT02E-14-18P(027)) U THERM BLAK N THERM BLAK H SIN YELLOW G OS GND BLAK S OS RED F SIN GND BLUE R REF GND YEL/WHT E REF RED/WHT D RES SHLD GRN/YEL P GND GRN/YEL A - - B - - - - J - - K - - L - - M - - T - - Motor Brake onnector 270-00256 (BEGA0589NN0000009000) 1 φr (U1) RED 2 PE GND GRN/YEL 3 φt (W1) BLUE 4 φs (V1) BLAK *A BRK (+) DIODE *B BRK ( ) 1N4007 THERM BLAK D THERM BLAK * USE ONLY WITH BRAKE OPTION Resolver onnector 270-00257 (AEGA052NN0000001) 1 - - 2 REF (R1) RED/WHT 3 REF GND (R2) YEL/WHT 4 OS GND (S1) BLAK 5 OS (S3) RED 6 SIN (S2) YELLOW 7 SIN GND (S4) BLUE 8 - - 9 - - 10 - - 11 - - 12 - - onnection hart (NPT) Resolver Terminal Function Wire olor 1 φr RED 2 φs BLAK 3 φt BLUE 4 PE GND GRN/YEL *S11 BRK (+) BLUE *S10 BRK ( ) BLUE S9 REF GND YEL/WHT S8 REF RED/WHT S7 SIN YELLOW S6 OS RED S5 OS GND BLAK S4 SIN GND BLUE S3 THERM BLAK S2 THERM BLAK S1 RES SHLD GRN/YEL * USE ONLY WITH BRAKE OPTION PB 269-00005 R S T GND S9 S8 S7 S6 S5 S4 S2 S3 S1 S11 S10 D1 TB1 TB2 TH1 TB3 (MOTOR ONN) TB2 (BRAKE ONN) TB1 (RESOLVER & THERM ONN) REF GND REF SIN OS OS GND SIN GND THERM THERM SHLD 9337 AIRPAX 66L080 BRK+ BRK- + R1 R2 1 JP1 NORMAL DISABLE *DIODE 1N4007 * Option 1 with brake Motor Brake onnector 270-00032 (PT02E-16-8P(027)) A φr RED B φs BLAK φt BLUE D PE GND GRN/YEL E BRK SHLD - F BRK (+) DIODE G BRK ( ) 1N4007 H - - MaxPlus is a registered trademark of MTS Systems orporation. 2000 MTS Systems orporation.