CONSTRUCTION ㆍDielectric ㆍCase ㆍFilling ㆍTerminals : Metallized Polypropylene film with segmented pattern : PBT (UL94 V-0) : Epoxy resin (UL94 V-0) : Tinned copper wire (2-pin / 4-pin) FEATURE ㆍHigh capacitance density dc-link capacitor ㆍHigh safety, Self-healing and self-protecting function built in ㆍLow loss, Low ESR ㆍLong product life, high reliability ㆍStable capacitance at THB conditions QUICK REFERENCE DATA Capacitance range Capacitance tolerance Rated voltage (VRdc at 85 ) IEC Climatic category Rated temperature Maximum permissible case temperature Insulation resistance (IR) APPLICATION For DC filtering, dc-link circuit ㆍHEV, EV (power train, OBC etc.) ㆍRenewable energies inverters ㆍIndustrial power supplies ㆍInverter circuit in appliances (air conditioner etc.) ㆍMotor drive.5μf to 50μF ±5% 450Vdc to Vdc 40 / 05 / 56 85 05 (observing voltage derating) IRxC 0,000s at (500)Vdc, min For < 500Vdc, measuring voltage Vdc For > 500Vdc, measuring voltage 500Vdc Withstanding voltage between terminals.5 x VRdc applied for 0s Withstanding voltage between terminals and case 2KVAC 50-60Hz applied for 60s Life time expectancy,000 hours at VR, 70 40,000 hours at VR, 85 Reference IEC 607, IEC 60068 Please refer to caution and warning at http://www.pilkor.co.kr/download/introductions.pdf before using these products. DC VOLTAGE DERATINGS VRdc at 85 450V 700V 900V V VOPdc at 70 500V 840V 080V 320V VOPdc at 05 300V 490V 630V 770V TYPE SPECIFICATION P. OF 2
Ordering Information < 2-pin type > < 4-pin type > 2 3 4 5 6 7 8 9 0 2 3 4 P 2 4 6 Q 7 0 3 0 6 J A S 4 ~4 5 6~7 Code Series name Code Pitch Code Voltage P246 PCPW 246 L 27.5±0.4 45 450V Q 37.5±0.7 70 700V T 52.5±0.7 90 900V V 8~0 2 Code Capacitance Code Cap. tolerance Code Type 05 uf J 5% A Standard 06 0uF M Automotive 07 uf L Low profile 3 4 Code Lead length Code Lead type Packing L 25.0±.0mm 2 2-PIN Arrange S 5.0±.0mm 4 4-PIN Arrange F 4.0±0.5mm 8 3.8±0.5mm 7 3.7±0.5mm 5 3.5±0.5mm 4 3.4±0.5mm TYPE SPECIFICATION P. 2 OF 2
Arrange Packing Information DIMENSION b X h X l (mm).0 x 2.0 x 3.0 3.0 x 23.0 x 3.0 5.0 x 25.0 x 3.0 7.0 x 27.0 x 3.0 8.0 x 28.0 x 3.0 9.0 x 29.0 x 3.0 2.0 x 3.0 x 3.0 Ødt ARRANGE 2-PIN 4-PIN SPQ PQ 0.8mm (+0.08/-0.05) - 20 05 95 60 500 500 600 525 500 475 240 22.0 x 37.0 x 3.0 0.8mm (+0.08/-0.05) 0.8mm (+0.08/-0.05) 60 240 8.0 x 33.0 x 42.0 20.0 x 35.0 x 42.0 24.0 x 39.0 x 42.0 28.0 x 43.0 x 42.0 30.0 x 45.0 x 42.0 30.0 x 5.0 x 42.0.0mm (+0./-0.05).2mm (+0.2/-0.05) 90 75 65 60 60 400 360 300 95 80 80 30.0 x 45.0 x 57.0 35.0 x 50.0 x 57.0 40.0 x 53.0 x 57.0 45.0 x 55.0 x 57.0 45.0 x 65.0 x 57.0 -.2mm (+0.2/-0.05) 40 35 30 30 30 20 05 90 60 60 TYPE SPECIFICATION P. 3 OF 2
V Rdc = 450Vdc at 85 (500Vdc at 70 ) Dimension Irms () ESR (2) TanD (3) CAP. (mm) P P dv/dt Ipk (A) (mω) ( x0-4 Part No. ) (uf) (mm) (mm) (V/us) (A) b h l 2P 4P 2P 4P 2P 4P P246 4 2 3 27.5-30 20 4.7-2.3-85 - L45405JA** 5 3 23 3 27.5-30 50 5.6-9.9-85 - L45505JA** 6 5 25 3 27.5-30 80 6.5-8.5-85 - L45605JA** 7 5 25 3 27.5-30 20 6.9-7.5-85 - L45705JA** 8 5 25 3 27.5-30 240 7.4-6.6-85 - L45805JA** 9 7 27 3 27.5-30 270 8.2-6.0-85 - L45905JA** 0 8 28 3 27.5-30 300 8.8-5.5-85 - L4506JA** 5 2 3 3 27.5-30 450 0.8-4.3-85 - L4556JA** 20 22 37 3 27.5 0.2 30 600 3.5 2.9 3.4 3. 85 75 L45206JA** 20 8 33 42 37.5-2 420 0.0-6.0-60 40 Q45206JA** 22 20 35 42 37.5 0.2 2 462 0.2.4 5.6 5. 60 40 Q45226JA** 25 20 35 42 37.5 0.2 2 525 0.8 2.0 5.0 4.5 60 40 Q45256JA** 30 24 39 42 37.5 0.2 2 630 2.8 4.2 4.2 3.8 60 40 Q45306JA** 35 24 39 42 37.5 0.2 2 735 3.6 5. 3.7 3.4 60 40 Q45356JA** 40 28 43 42 37.5 0.2 2 840 5.6 7.3 3.3 3.0 60 40 Q45406JA** 45 28 43 42 37.5 0.2 2 945 6.4 8.2 3.0 2.7 60 40 Q45456JA** 50 30 45 42 37.5 20.3 2 050 7.8 9.8 2.7 2.5 60 40 Q45506JA** 55 30 45 42 37.5 20.3 2 55 8.5 20.6 2.5 2.3 60 40 Q45556JA** 60 30 5 42 37.5 20.3 2 260 20. 22.3 2.3 2. 60 40 Q45606JA** 60 30 45 57 52.5 20.3 4 840-9.2-3.2-250 T45606JA** 75 30 45 57 52.5 20.3 4 050-2.2-2.6-250 T45756JA** 35 50 57 52.5 20.3 4 400-25.9-2.0-250 T4507JA** 0 35 50 57 52.5 20.3 4 540-27.0 -.9-250 T457JA** 20 40 53 57 52.5 20.3 4 680-29.6 -.8-250 T4527JA** 30 40 53 57 52.5 20.3 4 820-30.5 -.7-300 T4537JA** 40 45 55 57 52.5 20.3 4 960-32.5 -.6-300 T4547JA** 50 45 55 57 52.5 20.3 4 2-33. -.6-300 T4557JA** () Maximum RMS current at +70, 0KHz, T=+5 (Hot spot temp. = Tamb + ΔT = 70 + 5 = 85 ) (2) Typical ESR values at 0KHz, 20 (Maximum ESR value : less than 2.5 x typical ESR value) (3) Maximum TanD value at 0KHz, 20 Capacitance P=27.5mm C 30uF C > 30uF C uf TanD (x 0-4 ) at KHz 0 5 20 30 TYPE SPECIFICATION P. 4 OF 2
V Rdc = 700Vdc at 85 (800Vdc at 70 ) Dimension Irms () ESR (2) TanD (3) CAP. (mm) P P dv/dt Ipk (A) (mω) ( x0-4 Part No. ) (uf) (mm) (mm) (V/us) (A) b h l 2P 4P 2P 4P 2P 4P P246 2 2 3 27.5-40 80 3.7-9.9-65 - L70205JA** 3 3 23 3 27.5-40 20 4.9-3.3-65 - L70305JA** 4 5 25 3 27.5-40 60 6.0-9.9-65 - L70405JA** 5 7 27 3 27.5-40 200 7.0-8.3-65 - L70505JA** 6 8 28 3 27.5-40 240 7.9-6.9-65 - L70605JA** 7 9 29 3 27.5-40 280 8.7-5.9-65 - L70705JA** 8 2 3 3 27.5-40 320 0. - 4.9-65 - L70805JA** 9 2 3 3 27.5 40 360 0.4-4.6-65 - L70905JA** 0 22 37 3 27.5 0.2 40.8 2.4 4. 3.7 65 55 L7006JA** 0 8 33 42 37.5-22 220 9.2-7. - 0 - Q7006JA** 2 20 35 42 37.5 0.2 22 264 0.0. 5.8 5.3 0 95 Q7026JA** 5 24 39 42 37.5 0.2 22 330 2.0 3.3 4.8 4.4 0 95 Q7056JA** 20 24 39 42 37.5 0.2 22 440 3.8 5.4 3.6 3.3 0 95 Q70206JA** 22 28 43 42 37.5 0.2 22 484 5.4 7. 3.3 3.0 0 95 Q70226JA** 25 28 43 42 37.5 0.2 22 550 6.4 8.3 2.9 2.7 0 95 Q70256JA** 30 30 45 42 37.5 20.3 22 660 8.3 20.3 2.5 2.3 0 95 Q70306JA** 35 30 5 42 37.5 20.3 22 726 20.5 22.8 2.2 2.0 0 95 Q70356JA** 40 30 45 57 52.5 20.3 5 600-7.0-4. - 220 T70406JA** 50 35 50 57 52.5 20.3 5 750-20.0-3.4-220 T70506JA** 60 35 50 57 52.5 20.3 5 925-2.5-3.0-220 T70606JA** 70 40 53 57 52.5 20.3 5 050-23.9-2.7-250 T70706JA** 80 45 55 57 52.5 20.3 5 200-26.3-2.4-250 T70806JA** 90 45 65 57 52.5 20.3 5 350-29.0-2.2-250 T70906JA** 45 65 57 52.5 20.3 5 500-30.9-2.0-250 T7007JA** () Maximum RMS current at +70, 0KHz, T=+5 (Hot spot temp. = Tamb + ΔT = 70 + 5 = 85 ) (2) Typical ESR values at 0KHz, 20 (Maximum ESR value : less than 2.5 x typical ESR value) (3) Maximum TanD value at 0KHz, 20 Capacitance P=27.5mm C 30uF C > 30uF C uf TanD (x 0-4 ) at KHz 0 5 20 30 TYPE SPECIFICATION P. 5 OF 2
V Rdc = 900Vdc at 85 (Vdc at 70 ) Dimension Irms () ESR (2) TanD (3) CAP. (mm) P P dv/dt Ipk (A) (mω) ( x0-4 Part No. ) (uf) (mm) (mm) (V/us) (A) b h l 2P 4P 2P 4P 2P 4P P246 2 3 27.5-75 75 3. - 28.6-50 - L9005JA** 2 3 23 3 27.5-75 50 4.7-4.5-50 - L90205JA** 3 5 25 3 27.5-75 225 6. - 9.8-50 - L90305JA** 4 8 28 3 27.5-75 300 7.6-7.4-50 - L90405JA** 5 9 29 3 27.5-75 375 8.7-6.0-50 - L90505JA** 6 2 3 3 27.5-75 450 9.9-5. - 50 - L90605JA** 7 22 37 3 27.5 0.2 75 525.4 2.0 4.4 4.0 50 45 L90705JA** 8 20 35 42 37.5 0.2 54 432 0.6-5.8-90 - Q90805JA** 0 24 39 42 37.5 0.2 54 540.5 2.8 5.2 4.7 90 80 Q9006JA** 2 24 39 42 37.5 0.2 54 648 2. 3.5 4.7 4.2 90 80 Q9026JA** 5 28 43 42 37.5 0.2 54 80 4. 5.7 4.0 3.6 90 80 Q9056JA** 8 30 45 42 37.5 20.3 54 972 5.6 7.3 3.5 3.2 90 80 Q9086JA** 20 30 45 42 37.5 20.3 54 080 6.4 8.2 3.3 3.0 90 80 Q90206JA** 22 30 5 42 37.5 20.3 54 88 7. 9.0 3.2 2.9 90 80 Q90226JA** 25 30 45 57 52.5 20.3 35 875-6.9-4. - 40 T90256JA** 30 35 50 57 52.5 20.3 35 050-9.9-3.5-40 T90306JA** 35 35 50 57 52.5 20.3 35 225-2. - 3. - 40 T90356JA** 40 40 53 57 52.5 20.3 35 400-23.5-2.8-40 T90406JA** 45 40 53 57 52.5 20.3 35 575-24.5-2.5-60 T90456JA** 50 45 55 57 52.5 20.3 35 750-26.9-2.3-60 T90506JA** 55 45 65 57 52.5 20.3 35 925-29.6-2. - 60 T90556JA** 60 45 65 57 52.5 20.3 35 2-30.8-2.0-60 T90606JA** () Maximum RMS current at +70, 0KHz, T=+5 (Hot spot temp. = Tamb + ΔT = 70 + 5 = 85 ) (2) Typical ESR values at 0KHz, 20 (Maximum ESR value : less than 2.5 x typical ESR value) (3) Maximum TanD value at 0KHz, 20 Capacitance P=27.5mm C 30uF C > 30uF C uf TanD (x 0-4 ) at KHz 0 5 20 30 TYPE SPECIFICATION P. 6 OF 2
V Rdc = Vdc at 85 (300Vdc at 70 ) Dimension Irms () ESR (2) TanD (3) CAP. (mm) P P dv/dt Ipk (A) (mω) ( x0-4 Part No. ) (uf) (mm) (mm) (V/us) (A) b h l 2P 4P 2P 4P 2P 4P P246 2 3 27.5-3.8 9. 40 - L05JA**.5 3 23 3 27.5-50 4.9 3.2 40 - L55JA** 2 5 25 3 27.5-200 6.0 0.0 40 - L205JA** 3 8 28 3 27.5-300 7.6 7.4 40 - L305JA** 4 2 3 3 27.5-400 9. 6.0 40 - L405JA** 5 22 37 3 27.5 0.2-500 0.3 0.8 5.4 4.9 40 35 L505JA** 5 8 33 42 37.5-73 365 9.2-7.0-70 - Q505JA** 6 20 35 42 37.5 0.2 73 438 9.4 0.5 6.6 6.0 70 60 Q605JA** 8 24 39 42 37.5 0.2 73 584.4 2.6 5.3 4.8 70 60 Q805JA** 0 28 43 42 37.5 0.2 73 730 3.6 5. 4.4 4.0 70 60 Q06JA** 2 28 43 42 37.5 0.2 73 876 4.5 6. 3.9 3.5 70 60 Q26JA** 5 30 5 42 37.5 20.3 73 095 7.2 9. 3.2 2.9 70 60 Q56JA** 5 30 45 57 52.5 20.3 50 750-4. - 5.9-20 T56JA** 20 30 45 57 52.5 20.3 50 0-7.2-4.6-20 T206JA** 25 35 50 57 52.5 20.3 50 250-8.9-3.8-20 T256JA** 30 40 53 57 52.5 20.3 50 500-2.4-3.4-40 T306JA** 35 45 55 57 52.5 20.3 50 750-23.8-3.0-40 T356JA** 40 45 65 57 52.5 20.3 50 2000-26.5-2.7-40 T406JA** 45 45 65 57 52.5 20.3 50 2250-27.8-2.5-40 T456JA** () Maximum RMS current at +70, 0KHz, T=+5 (Hot spot temp. = Tamb + ΔT = 70 + 5 = 85 ) (2) Typical ESR values at 0KHz, 20 (Maximum ESR value : less than 2.5 x typical ESR value) (3) Maximum TanD value at 0KHz, 20 Capacitance P=27.5mm C 30uF C > 30uF C uf TanD (x 0-4 ) at KHz 0 5 20 30 TYPE SPECIFICATION P. 7 OF 2
PERMISSIBLE VOLTAGE - These capacitors are designed only for DC voltage. So should not be used for AC line. - Use the peak voltage(vo-p) within the rated voltage. - Use the peak to peak ripple voltage(vp-p) within 0.2 x VR Non reversing recurrent wave form DC VOLTAGE & PEAK CURRENT & RMS CURRENT DERATING MAXIMUM REPETITIVE PEAK VOLTAGE Repetitive surge voltage Maximum duration / day. x VRdc 30% of on load duration.5 x VRdc 30min.2 x VRdc 5min.3 x VRdc min.5 x VRdc 0ms TYPE SPECIFICATION P.8 OF 2
CHARACTERISTICS ΔC/C[%] Capacitance change vs. temperature RC[s] Insulation resistance vs. Temperature 5 4 3 2 0 - -2-3 -4-5 -60-40 -20 0 20 40 60 80 20 Tamb [ ] 000 00 0-40 -20 0 20 40 60 80 20 Tamb [ ] TanD[x0-4 ] TanD vs. Temperature V OP /V R Life expectancy 500 400 300 200.3 70.2. 85.0 0.9 0.8 uf/700vdc (0KHz) 05 0.7 0.6 0-60 -40-20 0 20 40 60 80 20 Tamb [ ] 0.5 0 00 000 0000 Life expectancy [hrs] Z[mΩ] Impedance (450Vdc) Z[mΩ] Impedance (700Vdc) 0000 0000 000 00 5uF 50uF 50uF 000 00 8uF 30uF uf 0 0 0 0 0. 0 0 0. 0 0 Z[mΩ] Impedance (900Vdc) Z[mΩ] Impedance (Vdc) 0000 000 00 5uF 20uF 60uF 0000 000 00 3uF 2uF 45uF 0 0 0 0 0. 0 0 0. 0 0 TYPE SPECIFICATION P.9 OF 2
PERMISSIBLE CURRENT [Irms] Permissible current (450Vdc) [Irms] Permissible current (700Vdc) 50uF uf 0 50uF 0 30uF 5uF 8uF 0 0. 0 0 0. 0 [Irms] Permissible current (900Vdc) [Irms] Permissible current (Vdc) 60uF 45uF 0 20uF 0 2uF 5uF 3uF 0 0. 0 0 0. 0 TYPE SPECIFICATION P.0 OF 2
PRODUCT MARKING Capacitors are marked on the top with the following information :. Rated capacitance code in accordance with IEC 60062. Tolerance on rated capacitance : J : ± 5 % K : ± 0 %. Rated (DC) Voltage ( 450 V ). Manufacturer's type designation ( PCPW 246 ). Code for dielectric material (MKP). Manufacturer's name (PILKOR). Year and week code (WK720). Marking color : white Example of marking 20u J 450V PILKOR PCPW 246 MKP WK720 Marking on the top PACKAGE MARKING The package containing the capacitors is marked as shown. PILKOR Electronics MKP RAD POTTED TYPE 20uF ±5% 450V 40/05/56 BATCH NO C752500 400 P246Q45206JAS2 20uF ±5% DATE 720 450Vdc LINE MARKING EXPLANATION Manufacturer`s name 2 Sub family 3. Pb free marking(jedec-std-97) 4 Type description 5 Capacitance value, tolerance, Voltage and climatic category (IEC) 6 Batch no. & production period year and week code 7 Quantity and Product code (3NC) 8 Capacitance, tolerance and voltage TYPE SPECIFICATION P. OF 2
TEST REQUIREMENTS NO ITEM TEST CONDITIONS REQUIREMENTS Capacitance KHz at room temperature Shall be with in prescribed tolerance range 2 TanD 0KHz at room temperature With in specified limit 3 Insulation at V, min for V Rdc < 500V RC (Ω F) > 0,000 s 4 Resistance Voltage test between terminal 5 Surge discharge 6 Rapid change of temperature 7 Damp heat load 8 Endurance 9 Robustness of termination 0 Solderability Resistance to soldering heat 2 Vibration 3 Shock or impact at 500V, min for V Rdc 500V terminal-terminal :.5 x V Rdc, 0s terminal-case : 2,000V AC, 60s.3 x V Rdc (.3 x Ipk) Number of discharge : 0 Time lapse : within 2min (total 33.3hrs) -40±2 = lower category temp. +05±2 = upper category temp. Transition time = h 5 cycles No visible damage or puncture No flashover Cap. loss < 2% at KHz ΔTanD <.2 x initial TanD + 0.000 at 0KHz Visual : No abnormality Cap. loss < 2% at KHz ΔTanD < 0.050 at 0KHz 40±2, 93±3%RH, V R, 0hrs Cap. loss < 0% at KHz ΔTanD < 0.050 at 0KHz 85±2 :.3 x V Rdc, 0hrs 05±2 :.3 x V OPdc, 0hrs ) Lead pull test Wire dia. Load Time 0.8mm 0N 0 ± s > 0.8mm 20N 0 ± s 2) Lead bend test(2cycle) Wire dia. Load Time 0.8mm 0N 2~3 s/bend > 0.8mm 20N 2~3 s/bend Non-activated colophony flux 50 Solder bath temp. : 245 ± 5 Immerse time : 2 ± 0.5s No pre-drying Solder bath temp. : 260 ± 5 Dipping time : 0 ± s 0Hz to 55Hz ; Amplitude ±0.35mm or acceleration 98m/s2 Test duration : 0 frequency cycles 3 axes offset from each other by 90 octave/min Pulse shape : half sine Acceleration : 490 m/s2 Duration of pulse : ms Cap. loss < 5% at KHz ΔTanD < 0.050 at 0KHz 2) No abnormality such as cutting, slack of termination Good tinning as evidenced by free flowing of the solder with wetting of the terminations (>95%) Visual : No abnormality Cap. loss < 2% at KHz ΔTanD < 0.0050 at 0KHz No visible damage Cap. loss < 2% at KHz ΔTanD < 0.0050 at 0KHz No viisible damage Cap. loss < 2% at KHz ΔTanD < 0.0050 at 0KHz TYPE SPECIFICATION P.2 OF 2