Turning Inserts for teel ZZ HADMETA ZZ HADMETA is a professional manufacturer of cemented carbide cutting tools. Our turning inserts for steel processing with imported raw powder materials, through a special sintering process, have a peculiar gradient cobalt-rich on surface of the substrates which can ensure the inserts' high performance when finishing the CVD coating. Our CVD coating is the most advanced in the world. The coating materials are MT-TiCN0- Al2O3 with thickness of 14μm, which have high abrasion resistance. After special management on the surface of the coating inserts, the internal stress and surfaceness of coating were reduced while cutting resistance was also cut down. Our Z P series grade can cutting steel and alloy steel from finish machining, to semifinish and rough machining. Advantages: Cobalt - rich structure on the surface of the substrate makes the inserts' edge safety. α- Al2O3 coating makes the inserts high stability, high abrasive resistance and high resistance of plastic deformation pecial surface management makes the internal stress reduced and small surfaceness of coating. imported raw powder material Hi-accuracy CNC press machine pecial sintering technology Hi-accuracy mould system Pressure sintering furnace teady technology Guarantee of mould's accuracy Guarantee of products teady quality of carbide substrate Good coating quality guaranteed by the cobalt-rich on the substrate
ZZ HADMETA Turning Inserts for teel Bi-color inserts TiN identifying layer α- Al2O 3 abrasision resistance layer Columnar TiCN layer pecial transit layer for enlarging bonded quality Cobalt-rich layer substrate with high level hardness,ensuring it's high hardness and high resistance of plastic deformation P teel & Alloy teel Best Application for ecommended application CVD Coated PVD Coated Uncoated ZP101 ZP251 ZP301 ZP726 ZP20 ZP35 Hardness trength P01 P05 P10 P15 P20 P25 P30 P35 P40 02
ZZ HADMETA Turning Inserts for teel P teel & Alloy teel Finishing oughing Negtive-Type Finishing emi ounghing C ounghing Finishing FW MD A Interupted Varying Depth of Cut Good Condition Cutting peed Cutting peed Cutting peed ZP251 ZP251 ZP301 ZP301 80-150 70-120 70-120 55-90 ZP101 ZP251 ZP251 ZP301 105-220 100-220 100-210 100-150 ZP101 ZP101 ZP251 ZP251 135-330 105-310 105-280 105-210 P teel & Alloy teel Finishing oughing Positive-Type FW Finishing MD emi Finishing A ounghing Interupted Cutting pee ZP251 ZP251 ZP301 80-150 70-120 70-120 Varying Depth of Cut Good Condition Cutting peed Cutting peed ZP101 ZP251 ZP301 105-220 100-210 100-210 ZP101 ZP101 ZP251 135-330 105-310 105-310 03
ZZ HADMETA Turning Inserts for teel CNMG CNMG CNMG CNMM Type Dimesion (mm) ecommended ecommended Holder (IO) (inch) Φ Φ ZP101 ZP251 ZP301 090304-FW 321-FW 9.7 9.525 3.18 3.81 090308-FW 322-FW 120404-FW 431-FW 120408-FW 432-FW 12.9 12.7 4.76 5.16 120412-FW 433-FW 1.2 090304-MD 321-MD 9.7 9.525 3.18 3.81 090308-MD 322-MD 120404-MD 431-MD 120408-MD 432-MD 12.9 12.7 4.76 5.16 120412-MD 433-MD 1.2 120416-MD 434-MD 1.6 160608-MD 542-MD MCN/ PCN/ DCN/ MCBN/ PCBN/ MCKN/ MCFN/ MCGN/ MCN/ MCMNN ****-MCKN/ ****-MCWN/ 160612-MD 543-MD 16.1 15.875 6.35 6.35 1.2 ****-MCN/ 160616-MD 544-MD 1.6 190608-MD 642-MD 190612-MD 643-MD 19.3 19.05 6.35 7.94 1.2 190616-MD 644-MD 1.6 120408-A 432-A 120412-A 433-A 12.9 12.7 4.76 5.16 1.2 120416-A 434-A 1.6 160608-A 542-A 160612-A 543-A 1.2 16.1 15.875 6.35 6.35 160616-A 544-A 1.6 160624-A 546-A 2.4 190608-A 642-A 190612-A 643-A 1.2 19.3 19.05 6.35 7.93 190616-A 644-A 1.6 190624-A 646-A 2.4 250924-A 866-A 25.79 25.4 9.525 9.12 2.4 120408-C 432-C 0.8 120412-C 433-C 12.9 12.7 4.76 5.16 1.2 120416-C 434-C 1.6 160608-C 542-C 0.8 160612-C 543-C 1.2 16.1 15.875 6.35 6.35 160616-C 544-C 1.6 160624-C 546-C 2.4 190612-C 643-C 1.2 190616-C 644-C 19.3 19.05 6.35 7.94 1.6 190624-C 646-C 2.4 250924-C 866-C 2.4 25.79 25.4 9.525 9.12 250932-C 868-C 3.2 04
Turning Inserts for teel ZZ HADMETA DNMG DNMG DNMG DNMM NMG NMG Type Dimesion (mm) ecommended (IO) (inch) Φ Φ ZP101 ZP251 ZP301 110404-FW 331-FW 110408-FW 332-FW 11.6 9.525 4.76 3.81 110412-FW 333-FW 1.2 150404-FW 431-FW 150408-FW 432-FW 4.76 150412-FW 433-FW 1.2 15.5 12.7 5.16 150604-FW 441-FW 150608-FW 442-FW 6.35 150612-FW 443-FW 1.2 110404-MD 331-MD 110408-MD 332-MD 11.6 9.525 4.76 3.81 110412-MD 333-MD 1.2 150404-MD 431-MD 150408-MD 432-MD 4.76 150412-MD 433-MD 1.2 150604-MD 441-MD 15.5 12.7 5.16 150608-MD 442-MD 6.35 150612-MD 443-MD 1.2 150616-MD 444-MD 1.6 150408-A 432-A 150412-A 433-A 4.76 1.2 150416-A 434-A 1.6 15.5 12.7 5.16 150608-A 442-A 150612-A 443-A 6.35 1.2 150616-A 444-A 1.6 150608-C 442-C 150612-C 443-C 15.5 12.7 6.35 5.16 1.2 150616-C 444-C 1.6 120408-FW 432-FW 12.7 12.7 4.76 5.16 120412-FW 433-FW 1.2 090304-MD 321-MD 9.525 9.525 3.18 3.81 090308-MD 322-MD 120404-MD 431-MD 120408-MD 432-MD 12.7 12.7 4.76 5.16 120412-MD 433-MD 1.2 120416-MD 434-MD 1.6 150612-MD 543-MD 1.2 15.875 15.875 6.35 6.35 150616-MD 544-MD 1.6 ecommended Holder MDJN/ PDJN/ DDJN/ MDPNN MDQN/ ****-MDQN/ ****-MDUN/ ****-MDZN/ PBN/ MDNN PDNN MKN/ PKN/ 05
ZZ HADMETA Turning Inserts for teel NMG NMM TNMG TNMG Type Dimesion (mm) ecommended (IO) (inch) Φ Φ ZP101 ZP251 ZP301 120408-A 432-A 120412-A 433-A 12.7 12.7 4.76 5.16 1.2 120416-A 434-A 1.6 150608-A 542-A 150612-A 543-A 1.2 15.875 15.875 6.35 6.35 150616-A 544-A 1.6 150624-A 546-A 2.4 190608-A 642-A 190612-A 643-A 1.2 19.05 19.05 6.35 7.94 190616-A 644-A 1.6 190624-A 646-A 2.4 250716-A 854-A 7.94 1.6 250724-A 856-A 25.4 25.4 9.12 2.4 9.525 250924-A 866-A 2.4 120408-C 432-C 12.7 12.7 4.76 5.16 120412-C 433-C 1.2 150612-C 543-C 1.2 15.875 15.875 6.35 6.35 150616-C 544-C 1.6 190612-C 643-C 1.2 190616-C 644-C 19.05 19.05 6.35 7.94 1.6 190624-C 646-C 2.4 250724-C 856-C 2.4 7.94 250732-C 858-C 3.2 25.4 25.4 9.12 250924-C 866-C 2.4 9.525 250932-C 868-C 3.2 160404-FW 331-FW 160408-FW 332-FW 16.5 9.525 4.76 3.81 160412-FW 333-FW 1.2 220408-FW 432-FW 22 12.7 4.76 5.16 220412-FW 433-FW 1.2 160404-MD 331-MD 160408-MD 332-MD 16.5 9.525 4.76 3.81 160412-MD 333-MD 1.2 220404-MD 431-MD 220408-MD 432-MD 22 12.7 4.76 5.16 220412-MD 433-MD 1.2 220416-MD 434-MD 1.6 ecommended Holder MN/ PN/ DN/ BC/ ****-MKN/ MTQN/ MTBN/ MTENN MTJN/ MTFN/ MTGN/ MTAN/ MTTN/ MTN/ ****-MTFN/ ****-MTQN/ ****-MTJN/ 06
Turning Inserts for teel ZZ HADMETA TNMG TNMM VNMG VNMG WNMG WNMG WNMG Type Dimesion (mm) ecommended ecommended Holder (IO) (inch) Φ Φ ZP101 ZP251 ZP301 160408-A 332-A ****-MTUN/ 16.5 9.525 4.76 3.81 160412-A 333-A 1.2 ****-MTWN/ 220408-A 432-A 220412-A 433-A 22 12.7 4.76 5.16 1.2 220416-A 434-A 1.6 270608-A 542-A 270612-A 543-A 27.5 15.875 6.35 6.35 1.2 270616-A 544-A 1.6 330716-A 654-A 7.94 1.6 33 19.05 7.94 330924-A 666-A 9.525 2.4 160408-C 332-C 16.5 9.525 4.76 3.81 160412-C 333-C 1.2 220416-C 434-C 22 12.7 4.76 5.16 1.6 160404-FW 331-FW MVJN/ 16.5 9.525 4.76 3.81 160408-FW 332-FW MVQN/ 160408-MD 332-MD 0.8 MVUN/ MVVNN ****-MVQN/ 160412-MD 333-MD 16.5 9.525 4.76 3.81 ****-MVUN/ 1.2 ****-MVWN/ ****-MVXN/ ****-MVVN/ 060404-FW 331-FW MWN/ 060408-FW 332-FW 6.5 9.525 4.76 3.81 WWN/ 060412-FW 333-FW 1.2 PWN/ 080404-FW 431-FW DWN/ 080408-FW 432-FW 8.7 12.7 4.76 5.16 ****-MWN/ 080412-FW 433-FW 1.2 060408-MD 332-MD 6.5 9.525 4.76 3.81 060412-MD 333-MD 1.2 080408-MD 432-MD 080412-MD 433-MD 8.7 12.7 4.76 5.16 1.2 080416-MD 434-MD 1.6 060408-A 332-A 6.5 9.525 4.76 3.81 060412-A 333-A 1.2 080408-A 432-A 080412-A 433-A 8.7 12.7 4.76 5.16 1.2 080416-A 434-A 1.6 07
ZZ HADMETA Turning Inserts for teel CCMT CCMT CCMW Type Dimesion (mm) ecommended (IO) (inch) Φ Φ ZP101 ZP251 ZP301 060202-FW 2(1.5)0-FW 6.4 6.35 2.38 2.8 060204-FW 2(1.5)1-FW 09T302-FW 3(2.5)0-FW 09T304-FW 3(2.5)1-FW 9.7 9.525 3.97 4.4 09T308-FW 3(2.5)2-FW 120404-FW 431-FW 12.9 12.7 4.76 5.5 060204-MD 2(1.5)1-MD 6.4 6.35 2.38 2.8 060208-MD 2(1.5)2-MD 09T304-MD 3(2.5)1-MD 9.7 9.525 3.97 4.4 09T308-MD 3(2.5)2-MD 120404-MD 431-MD 12.9 12.7 4.76 5.5 120408-MD 432-MD 09T304 3(2.5)1 9.7 9.525 3.97 4.4 09T308 3(2.5)2 ecommended Holder CAC/ CFC/ CMCN CC/ ****-CKC/ ****-CC/ ****-CZC/ CCMT DCMT DCMT DCMT CMT CMT 060208-A 2(1.5)2-A 6.4 6.35 2.38 2.8 09T308-A 3(2.5)2-A 9.7 9.525 3.97 4.4 09T312-A 3(2.5)3-A 1.2 120408-A 432-A 12.9 12.7 4.76 5.5 120412-A 433-A 1.2 070202-FW 2(1.5)0-FW 7.75 6.35 2.38 2.8 070204-FW 2(1.5)1-FW 11T302-FW 3(2.5)0-FW 11T304-FW 3(2.5)1-FW 11.6 9.525 3.97 4.4 11T308-FW 3(2.5)2-FW 070202-MD 2(1.5)0-MD 7.75 6.35 2.38 2.8 070204-MD 2(1.5)1-MD 11T304-MD 3(2.5)1-MD 11T308-MD 3(2.5)2-MD 11.6 9.525 3.97 4.4 11T312-MD 3(2.5)3-MD 1.2 11T308-A 3(2.5)2-A 11.6 9.525 3.97 4.4 11T312-A 3(2.5)3-A 1.2 09T304-FW 3(2.5)1-FW 9.525 9.525 3.97 4.4 09T308-FW 3(2.5)2-FW 09T304-MD 3(2.5)1-MD 9.525 9.525 3.97 4.4 09T308-MD 3(2.5)2-MD 120404-MD 431-MD 120408-MD 432-MD 12.7 12.7 4.76 5.5 120412-MD 433-MD 1.2 DJC/ DFC/ DAC/ DNCN DQC/ ****-DWC/ ****-DQC/ ****-DC/ ****-DUC/ ****-DZC/ BC/ DCN KC/ C/ ****-KC/ ****-C/ 08
Turning Inserts for teel ZZ HADMETA Type Dimesion (mm) ecommended (IO) (inch) Φ Φ ZP101 ZP251 ZP301 ecommended Holder CMW 09T308 3(2.5)2 9.525 9.525 3.97 4.4 120408 432 12.7 12.7 4.76 5.5 CMT TCMT TCMT TCMW 09T308-A 3(2.5)2-A 9.525 9.525 3.97 4.4 09T312-A 3(2.5)3-A 1.2 120408-A 432-A 12.7 12.7 4.76 5.5 120412-A 433-A 1.2 090202-FW 1.8(1.5)0-FW 9.6 5.56 2.38 2.5 090204-FW 1.8(1.5)1-FW 110302-FW 220-FW 110304-FW 221-FW 11 6.35 3.18 2.8 110308-FW 222-FW 16T304-FW 3(2.5)1-FW 16.5 9.525 3.97 4.4 090204-MD 1.8(1.5)1-MD 9.6 5.56 2.38 2.5 090208-MD 1.8(1.5)2-MD 110304-MD 221-MD 110308-MD 222-MD 11 6.35 3.18 2.8 110312-MD 223-MD 1.2 16T304-MD 3(2.5)1-MD 16T308-MD 3(2.5)2-MD 16.5 9.525 3.97 4.4 16T312-MD 3(2.5)3-MD 1.2 220408-MD 432-MD 22 12.7 4.76 5.5 110204 2(1.5)1 11 6.35 2.38 2.8 16T308 3(2.5)2 16.5 9.525 3.97 4.4 TFC/ TGC/ TWC/ ****-TFC/ ****-TUC/ ****-TWC/ TCMT VBMT VBMT 110308-A 222-A 11 6.35 3.18 2.8 110312-A 223-A 1.2 16T308-A 3(2.5)2-A 16.5 9.525 3.97 4.4 16T312-A 3(2.5)3-A 1.2 220408-A 432-A 22 12.7 4.76 5.5 220412-A 433-A 1.2 110302-FW 220-FW 110304-FW 221-FW 11 6.35 3.18 2.8 110308-FW 222-FW 110312-FW 223-FW 1.2 160402-FW 330-FW 160404-FW 331-FW 16.6 9.525 4.76 4.4 160408-FW 332-FW 160412-FW 333-FW 1.2 160404-MD 331-MD 160408-MD 332-MD 16.6 9.525 4.76 4.4 160412-MD 333-MD 1.2 09 VVBN VJB/ VQB/ VUB/ ****-VQB/ ****-VUB/ ****-VWB/ ****-VXB/ ****-VZB/
ZZ HADMETA Turning Inserts for teel Type Dimesion (mm) ecommended ZP101 ZP251 ZP301 ecommended Holder