Low Resistance Flat Chip Resistors Type SR73
|
|
- Ανθούσα Τάνις Αντωνόπουλος
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. AHA 11/11/01 CERTIFIED 2. Type Designation The type designation shall be in the following form: SR73 Style K Type 2A Power Rating T Termination TE Packaging 1R00 Resistance J Resistance Tolerance H: ±100 ppm K: ±200 ppm M: ±500 ppm M: ±800 ppm M: ±1000 ppm Depending on resistance value 1E: W (1/16W) 1J: 0.1 W (1/10W) 2A: W (1/8W) 2B: 0.25 W (1/4W) 2E: 0.5 W (1/2W) 2H: 0.75 W (3/4W) 3A: 1 W (1W) T: 100% Sn L: Sn/Pb TP: Punched Paper Tape, Pitch-2mm (1E only) T: Punched Paper TE: Embossed Plastic TDD: 10" Punched Paper TED: 10" Embossed Plastic ±1%: 3 Significant Figures + Multiplier ±2%/±5%: 2 Significant Figures + Multiplier R: Indicates decimal point F: ± 1% G: ± 2% J: ± 5% 3. Dimensions and Structure 3-1 Dimensions a b L a b W H 1 E 1 J 2 A 2 B 2 E L W H a b (1.0 ± +0.1 ) (0.5 ± +0.1 ) (0.35 ± 0.05) (0.25 ± 0.1) (0.25 ± 0.1) (1.6 ± 0.2) (0.8 ± ) (0.45 ± 0.1) (0.35 ± 0.1) (0.35 ± 0.1) (2.0 ± 0.2) (1.25 ± 0.1) (0.5 ± 0.1) (0.4 ± 0.2) (0.3 ± ) (3.2 ± 0.2) (1.6 ± 0.2) (0.6 ± 0.1) (0.5 ± 0.3) (0.4 ± ) (3.2 ± 0.2) (2.6 ± 0.2) (0.6 ± 0.1) (0.5 ± 0.3) (0.4 ± ). 2 H (5.0 ± 0.2) (2.5 ± 0.2) (0.6 ± 0.1) (0.5 ± 0.3) (0.4 ± ) 3 A (6.3 ± 0.2) (3.1 ± 0.2) (0.6 ± 0.1) (0.5 ± 0.3) (0.4 ± ) PAGE 1 OF 8
2 3-2 Structure Protective Coat (Epoxy on Glass) Low Range Resistive Element Alumina Substrate Inner Termination 5 5 Termination (Nickel & Solder Plating) 4. Standard Applications Resistance Range (Ω) Max. Max. Operating Rated Type T.C.R. Power F: ±1% G: ±2% J: ±5% Working Overload Temp. Ambient (ppm/ C) Rating E96-E24 E24 E24 Voltage Voltage Range Temp. ± 200 * 0.51 ~ ~ ~ 10. SR73H1E ± W * 0.2 ~ ~ ~ V 1.98 V SR73K1E ± 500 * 0.1 ~ ~ ~ 0.18 SR73H1J ± ~ ~ ~ W 0.32 V 0.79 V SR73K1J ± ~ ~ ~ 0.18 SR73H2A ± ~ 10 SR73K2A ± ~ ~ W 1.11 V 2.79 V ± ~ SR73M2A ± ~ SR73H2B ± ~ 10 SR73K2B ± ~ ~ C 0.25 W 1.58 V 3.95 V SR73M2B ± ~ C ~ ± ~ C SR73H2E ± ~ 10 SR73K2E ± ~ ~ W 2.23 V 5.59 V ± ~ SR73M2E ± ~ SR73H2H ± ~ 10 SR73K2H ± ~ ~ W 2.73 V 6.84 V ± ~ SR73M2H ± ~ SR73H3A ± ~ 10 SR73K3A ± ~ ~ W 3.16 V 7.90 V ± ~ SR73M3A ± ~ * (F: ±1% E-24 only) PAGE 2 OF 8
3 5. Rating 5-1 Rating Percent Rated Wattage (%) For temperature in excess of 70 C, the load shall be derated in accordance with the following figure Ambient Temperature ( C) 5-2 Voltage Rating Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-mean-square (RMS) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: E = P x R Where: E = Rated voltage (V) P = Rated power (W) R = Nominal resistance (Ω) In no case shall be rated DC or R.M.S. continuous working voltage be greater than the applicable maximum value. 6. Body and Marking Type Tolerance Coating Color Marking Color SR73 F (±1%) Indigo White/ 4 digit SR73 G (±2%) J (±5%) Indigo White/ 3 digit Marking: a effective number and a multiplier. R means a decimal point. 7. Marking Method 3 Digit 4 Digit This character indicate Ω unit and F 4 digit express 4 effective numbers. R means a decimal point. R Ω R200 This character indicate Ω unit and G, J 3 digit express 3 effective numbers. R means a decimal point. 4R7 4.7 Ω 4R70 PAGE 3 OF 8
4 8. Characteristics 8-1 Mechanical Characteristics Item Requirement Test Methods (JIS C 5202) Withstanding No visual damage 6.10 Soldering Heat ± 1.0% 260 C ± 5 C 10 ± 1 sec. Solderability More than 95% of the surface of the termination 6.11 must be covered new solder 230 C ± 5 C 3 ± 0.5 sec. Termination Strength ± 1.0% ) Bending 2A, 2B Circuit board bending 5mm Circuit board bending 2mm 2) Shear 3) Pull-off strength Vibration ± 0.5% 6.3 Condition A Each direction / 2hrs Withstanding Solvent No visual & mechanical damage 1) 4.2 and 4.9 2) MIL-STD-202F Test method Electrical Characteristics Item Requirement Test Methods (JIS C 5202) Resistance Within tolerance 5.1 Measuring Voltage A, 25 C Resistance of Within specified R.T.C 5.2 Condition B Temperature Coefficient -55 C/125 C Short Time Overload ± 2.0% 5.5 Condition A Intermittent Overload ± 5.0% 5.8 Applied Voltage: RV x 2.5 Insulation Above 10 4 MΩ V DC The following sketch: \ PAGE 4 OF 8
5 8-2 Electrical Characteristics (Continued) Item Requirement Test Methods (JIS C 5202) Insulation Above 10 3 MΩ V DC The following sketch: \ Withstanding Voltage ± 0.5% V DC 60 ± 10/0 sec. The following sketch: \ Temperature Rise 1) Surface temp. rise: 100 C 5.4 (Rated Load) 2) R ± 0.5% 1) Test board 90mm x 10mm x 1.6mm 2) Recommended land dimensions 8-3 Environmental Characteristics Item Requirement Test Methods (JIS C 5202) Thermal Shock ± 1.0% -40 C 30 minutes (Air to Air) 125 C 30 minutes 100 cycles High Temperature ± 1.0% 7.2 Exposure 125 ± 3 C 1000 hrs. Load Life in Humidity ± 2.0% ± 2 C 90 ~ 95% RH 1000 hrs. Load Life ± 2.0% ± 3 C 1000 hrs. PAGE 5 OF 8
6 9. Recommended Land Dimensions 9-1 Flow Soldering Type Style Resistor Size A B C D B 1 E x D A (1.0 x 0.5) (0.5) (1.5) (0.5) (0.5) 1 J x (1.6 x 0.8) (1.0) (2.4) (0.8) (0.7) C 2 A x (2.0 x 1.25) (1.3) (3.1) (1.25) (0.9) Soldering Pad SR73 2 B x (3.2 x 1.6) (2.2) (4.4) (1.6) (1.1 ) Chip Resistor 2 E x (3.2 x 2.5) (2.2) (4.4) (2.5) (1.1 ) 2 H x (5.0 x 2.5) (3.5) (6.3) (2.5) (1.4 ) 3 A x (6.4 x 3.2) (4.6) (8.0) (3.2) (1.7) 9-2 Reflow Soldering D B A Soldering Pad Chip Resistor C Type Style Resistor Size A B C D 1 E x (1.0 x 0.5) (0.5) (1.3) (0.3) (0.4) 1 J x (1.6 x 0.8) (1.0) (2.0) (0.6) (0.5) 2 A x (2.0 x 1.25) (1.3) (2.5) (1.05) (0.6) SR73 2 B x (3.2 x 1.6) (2.2) (4.0) (1.4) (0.9 ) 2 E x (3.2 x 2.5) (2.2) (4.0) (2.3) (0.9 ) 2 H x (5.0 x 2.5) (3.5) (6.3) (2.3) (1.4 ) 3 A x (6.4 x 3.2) (4.6) (8.0) (3.0) (1.7) 10. Taping 10-1 Taped Configuration End tape (Empty) Leader tape (Empty) (Top tape) 7.87 (200) min (50) min (400) min. PAGE 6 OF 8
7 10-2 Dimensions of Punched Paper Tape T2 ød E T2 A B F W Embossed Carrier T1 P1 (TP) P1 P2 P0 Direction of Feed Packaging Size Code A B W E F T1 T2 P0 P1 P2 ød (TP) 7" 1H (0201) Paper Tape 1E (0402) (1.15 ± 0.1) (0.65 ± 0.1) (8.0 ± 0.2) (1.75 ± 0.1) (3.5 ± 0.05) (0.45 ± 0.1) (4.0 ± 0.1) (2.0 ± 0.05) (2.0 ± 0.05) (1.5 ± ) (2 mm Pitch) J (0603) " " " " " " (1.9 ± 0.1) (1.1 ± 0.1) (0.60 ± 0.1) (4.0 ± 0.1) A (0805) " " " (T) 7" (2.4 ± 0.1) (1.65 ± 0.1) (0.75 ± 0.1) PaperTape B (1206) " " " " (3.5 ± 0.1) (1.9 ± 0.1) E (1210) " " " " (3.5 ± 0.1) (2.8 ± 0.1) A (0805) " " " (2.4 ± 0.2) (1.45 ± 0.15) (0.85 ± 0.1) (0.25 ± 0.1) B (1206) " " " " (3.5 ± 0.1) (1.9 ± 0.2) (1.0 ± 0.1) (TE) 7" Embossed 2E (1210) (3.6 ± 0.15) (2.9 ± 0.15) (0.2 ± 0.1) Plastic H (2010) " " (5.4 ± 0.2) (2.9 ± 0.2) (12.0 ± 0.1) (5.5 ± 0.5) (0.85 ± 0.1) A (2512) " " " " (6.9 ± 0.2) (3.6 ± 0.2) (4.0 ± 0.1) J (0603) (1.9 ± 0.1) (1.1 ± 0.1) (8.0 ± 0.2) (1.75 ± 0.1) (3.5 ± 0.05) (0.60 ± 0.1) (TDD) 10" 2A (0805) " " " (2.4 ± 0.1) (1.65 ± 0.1) (0.75 ± 0.1) Paper Tape 2B (1206) " " " " (3.5 ± 0.1) (1.9 ± 0.1) E (1210) " " " " (3.5 ± 0.1) (2.8 ± 0.1) A (0805) " " " (2.4 ± 0.2) (1.45 ± 0.15) (0.85 ± 0.1) (0.25 ± 0.1) B (1206) " " " " (3.5 ± 0.1) (1.9 ± 0.2) (1.0 ± 0.1) (TE) 7" Embossed 2E (1210) (3.6 ± 0.15) (2.9 ± 0.15) (0.2 ± 0.1) Plastic H (2010) " " (5.4 ± 0.2) (2.9 ± 0.2) (12 ± 0.1) (5.5 ± 0.5) (0.85 ± 0.1) A (2512) " " " " (6.9 ± 0.2) (3.6 ± 0.2) (4.0 ± 0.1) PAGE 7 OF 8
8 t 11-5 Dimensions of Reel w øa øb Size øa max. Code 7" 10" øb w t øc ød e 1 H (0201) 1 E (0402) J (0603) (80 ± 2.0) (10 ± 1.0) (27 ± 2.0) (3.0 ± 0.5) 2 A (0805) B (1206) (178) (255) (1.5 ± 0.05) (13 ± 0.5) øc ød e 2 E (1210) H (2010) (60 ± 2.0) (14 ± 1.0) (21 ± 2.0) (2.0 ± 0.5) 3 A (2512) Quantity per reel or reel size are requested to designate at the time of ordering. Contents on label: (1) Article number (SR73K2ATD J) (4) Customer s code number (subject to change) (2) Quantity (5) Production lot number (3) Nominal Resistance and the (6) Manufacturer s name chip marking [Ex: 0.2 Ω (R20)] 10. Packing 10-1 Bulk Packing 1000 pcs or 5000 pcs chip are packed in a polyethylene package. The package shall be marked: (1) Article number (SR73K2A J) (2) Nominal Resistance Value (3) Quantity (4) Production lot number (5) Manufacturer s name (6) Customer s code number (subject to change) (7) Product order number Lot number (8 digits) Production Date Additional year, month day number 71 January, December, January, December, Packaging Method Size TE 7" Embossed TP 7" Punched T 7" Punched TED 10" Embossed TDD 10" Punched Code Plastic Paper Paper Plastic Paper 1 E (0402) 10,000 1 J (0603) 10,000 5,000 10,000 2 A (0805) 4,000 10,000 5,000 10,000 10,000 2 B (1206) 4,000 5,000 10,000 10,000 2 E (1210) 4,000 5,000 10,000 10,000 2 H (2010) 4,000 10,000 3 A (2512) 4,000 10,000 PAGE 8 OF 8
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραCSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Διαβάστε περισσότεραSPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότεραAnti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
Διαβάστε περισσότεραSPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραAutomotive Grade Thin Film Precision Chip Resistor
Features Construction D1 L -AEC-Q200 Compliance -Advanced thin film technology -RoHS compliant - Special materials, design, and processing for high sulfur applications - Test proven immunity to humidity,
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor. RCV Series. Features. Applications. Construction
High Voltage Thick Film Chip Resistor High Voltage Thick Film Chip Resistor Features Highly reliable multilayer electrode construction High component and equipment reliability Excellent performance at
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραThick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραApplication. Features
Thick Film Chip Resistor TCR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραThick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραData Sheet. Size: 0201/0402/0603/0805/1206/1210/2010/2512 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70,
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin film passivated ir resistor -Very tight tolerance down to ±0.01% -Extremely low R down to ±5 PPM/ -ide resistance range 1ohm ~ 3Meg ohm -Miniature
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραThick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
FEATURE Operating Temperature: -40 C ~ +125 C Storage Temperature: 15~28 C; Humidity < 80%RH Ceramic base provide high SRF Ultra-compact inductors provide high Q factors Low profile, high current are available
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin Film Passivated ir Resistor -Very ight olerance from ±0.01%~1% -Extremely Low R from ±5~ PPM/ -ide R-Value onstruction Marking pplications -Medical
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
Διαβάστε περισσότεραNTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Διαβάστε περισσότεραCEMENT FIXED RESISTORS
Self extinguishing Excellent flame and moisture resistance Extremely small sturdy and mechanically safe Non-inductive types available for all Royal Ohm Cement Types Too low or too high ohmic values on
Διαβάστε περισσότεραRS Series Current Sensing Thick Film Chip Resistor Current Sensing Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures -Low inductance -Highly reliable multilayer electrode construction -Higher
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραAutomotive Grade Chip Resistor-CR..A Series
CR.. Series -CR.. Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -EC-Q200 Compliance -Highly reliable multilayer
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραAutomotive Grade Anti-Sulfurated Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing environment
Διαβάστε περισσότερα