2
|
|
|
- Εφροσύνη Κεδίκογλου
- 7 χρόνια πριν
- Προβολές:
Transcript
1
2 2
3 3
4 4
5 5
6 CT TOOHOERS CT Toolholder Standard B-Type 10 CT-ER Collet Chuck CT-30, 40, 50 11, 12 CT-TG Collet Chuck CT-40, CT-EM End Mill Holder CT-40, CT-SRK Thermal Shrinkin Holder CT CT-SRKIN Thermal Shrinkin Holder CT-40, CT-SEM Shell Mill Holder CT-40, CT-FM Face Mill Holder CT CT-Stub Stub rbor Holder CT-40, CT-C rill Chuck rbor CT-40, CT- dapter CT CT-MT Morse Taper dapter CT-40, CT-J Center lignment Collet Chuck CT-40, CT-J Center lignment Shank & Base CT-40, HSK TOOHOERS HSK Toolholder Standard Form,E & F 27, 28 HSK-ER Collet Chuck Metric HSK-E 32, 40, 50, HSK-ER Collet Chuck Metric HSK- 40, 50, 63, HSK-ER Collet Chuck Metric HSK-FM 63 33, 34 HSK-EM End Mill Holder HSK- 50, 63, HSK Thermal Shrinkin Holder HSK- 63, HSK Thermal Shrinkin Holder HSK-FM 63 39, 40 HSK Thermal Shrinkin Holder HSK-E 32, 40, 50, 63 41, 42 HSK Thermal Shrinkin Holder HSK , 44 HSK-SEM Shell Mill Holder HSK-E 32, 40, 50, HSK-SEM Shell Mill Holder HSK- 50, 63, HSK-FM Face Mill Holder HSK HSK-SEM Shell Mill dapter Metric HSK-E 32, 40, 50, HSK-SEM Shell Mill dapter Metric HSK- 40, 50, 63, HSK-FM Face Mill Holder Metric HSK HSK-SEM Shell Mill dapter HSK-FM 63 51, 52 HSK-MT Morse Taper dapter Metric HSK- 50, 63, HSK-ER Short Collet Chuck Metric HSK- 63, HSK-B Blank End Metric HSK- 50, 63,
7 BT TOOHOERS BT Toolhoder Standard BT-MS BT-ER Collet Chuck Metric BT 30, 40, 50 57, 58 BT-ER Short Collet Chuck Metric BT 30, 40, BT-TG Collet Chuck BT 40, BT-EM End Mill Holder BT 40, 50 61, 62 BT-SRKIN Thermal Shrinkin Holder Metric BT 40, BT-SRK Thermal Shrinkin Holder Metric BT BT-SEM Milling Holder with Shell End BT 40, BT-FM Face Mill Holder BT BT-STUB Face Mill/Shell Mill Holder BT 40, BT-C rill Chuck rbor BT 30, 40, BT-MT Morse Taper dapter Metric BT 30, 40, BT-J Center lignment Collet Chuck Metric BT 40, BT-J Center lignment Shank & Base Metric BT BT-GTI Tapping ttachment Metric BT 40, ST COET CHUCKS ST-ER Collet Chuck ST-SRK Straight Shank 81, 82 GTI-ST TPPING TTCHMENT 83 MT-ER COET CHUCK 84 J COET CHUCK J Center lignment Collet Chuck ER J Center lignment Shank & Base 86 7
8 ER COETS ER Collet Chucking System 87 ER Collet Standard 88 ER Top Clamping Nut IN ER Spring Collet IN ER Spring Collet IN TG+ Spring Collet 92 ER Coolit-Sealed JET Collet 1450 PSI 93 ER Coolit-Sealed JET2 Spring Collet 1450 PSI 94 TG 100 Coolit-Sealed Spring Collet 500 PSI 95 ER Spring Collet Sets 96, 97 Shrinkin Thermal Shrink Chucking Systems 98, 99 ER Thermal Shrink ER Collet IN , 101 QWIK-RW Induction Heating Unit 102 QWIK-RW Shrinkin Thermal Electrical Unit 103 RW-IN Thermal Heating Unit V2 Version 104 RW-IN Thermal Shrink SRK ER 32 Collet Set 105 GTIN-ER Tapping Collet 106, 107 CCESSORIES Pull Stud Clamping Nut Wrench 116 Preset Screw 117 ock Screw 118, 119 Preset Screw for SRKIN Thermal Shrink Collets Metric 120 Cooling Tube 121 Clamp 122, 123 Easyock Electrical Nut-Clamp Torque Control evice 124, 125 8
9 NRE TOOHOERS MONOFORCE High Precision Ultra-Tight Toolholder 128, 129 MONO d Collet Chuck Holder ER IN , 131 MONO d Weldon Toolholder W-IN 1835-B 132, 133 MONO d Mill Holder PF 134 Collets for MONOFORCE 135 Reductions 136 TOP RUN 137 9
10 CT - TOOHOER STNR f1 f2 1 f3 C 8 17'50" a 6 7 f1 d3 G d1 d8 d5 d6 b 4 d 30 d12 20 e1 B Type e1 CT.N.S.I. B5.50 b G d 3 C d 6 d 5 d 8 f 1 Shank ±.001 d d 1 UNC-2B ±.01 ±.01 ±.002 ±.002 ±.005 ±.005 CT / CT / CT f 2 f e 1 Shank MIN ±.002 ±.005 MIN ±.004 d12 a CT CT CT
11 CT - ER COET CHUCK Taper Size CT-30, 40 and T3 Taper HRc Ra 4µin G2.5 20,000 RPM 1 G J 2Ref ER Ref Ref ER25-50 esignation Range J G CT30 ER16X2.750* M10 1/2-13 CT40 ER16X M12 5/8-11 CT40 ER16X M12 5/8-11 CT40 ER16X M12 5/8-11 CT40 ER20X M12 5/8-11 CT40 ER20X M12 5/8-11 CT40 ER20X M12 5/8-11 CT50 ER16X3.937* M CT50 ER16X5.906* M CT50 ER16X8.000* M CT50 ER20X3.937* M CT50 ER20X5.906* M CT50 ER20X8.000* M dd B for internal coolant flange. *Balance to G RPM. 11
12 CT - ER COET CHUCK Taper Size CT-30, 40 and T3 Taper HRc Ra 4µin G2.5 20,000 RPM 1 G J 2Ref ER Ref Ref ER25-50 esignation Range J G CT30 ER32X3.268* M18X1.5 1/2-13 CT40 ER25X M16 5/8-11 CT40 ER25X M16 5/8-11 CT40 ER25X M16 5/8-11 CT40 ER32X M22X1.5 5/8-11 CT40 ER32X M22X1.5 5/8-11 CT40 ER32X M22X1.5 5/8-11 CT40 ER40X M28X1.5 5/8-11 CT40 ER40X M28X1.8 5/8-11 CT50 ER25X4.000* M CT50 ER25X6.000* M CT50 ER25X8.000* M CT50 ER32X4.000* M22X CT50 ER32 X6.000* M22X CT50 ER32 X8.000* M22X CT50 ER40 X4.000* M28X CT50 ER40 X6.000* M28X CT50 ER40 X8.000* M28X CT50 ER50 X4.000* M36X CT50 ER50 X6.000* M36X dd B for internal coolant flange. *Balance to G RPM. 12
13 CT - TG COET CHUCK Taper Size CT-40 and T3 Taper HRc Ra 4µin H= G J esignation Range J* G CT40 TG100X /8-16 5/8-11 CT40 TG100X /8-16 5/8-11 CT40 TG100X /8-16 5/8-11 CT50 TG100X / CT50 TG100X / CT50 TG100X / CT50 TG100X / dd B for internal coolant flange. Collet Chuck TG100 is interchangeable with the following collets: Kennametal TG 100, Command 1000, Valenite OSG, yndex *eft-hand thread. 13
14 CT - SHORT ENMI HOER Taper Size CT T3 Taper HRc Ra 4µin Ref 1 Ref G J G1 esignation d 1 G CT40 EM 3/8X /8-11 CT40 EM 1/2X /8-11 CT40 EM 5/8X /8-11 CT40 EM 3/4X /8-11 CT40 EM 1X /8-11 CT40 EM 1-1/4X /
15 CT - ENMI HOER Taper Size CT T3 Taper HRc Ra 4µin G d d esignation d 1 2 G CT40 EM 3/16X /8-11 CT40 EM 1/4X /8-11 CT40 EM 3/8X /8-11 CT40 EM 1/2X /8-11 CT40 EM 5/8X /8-11 CT40 EM 3/4X /8-11 CT40 EM 7/8X /8-11 CT40 EM 1X /8-11 CT40 EM 1-1/4X /8-11 CT40 EM 1-1/2X /8-11 dd B for internal coolant flange. 15
16 CT - ENMI HOER Taper Size CT T3 Taper HRc Ra 4µin 1 2 G d d 3 2 esignation d G CT50 EM 1/4 X CT50 EM 1/4 X CT50 EM 1/4 X CT50 EM 3/8 X CT50 EM 3/8 X CT50 EM 3/8X CT50 EM 1/2 X CT50 EM 1/2 X CT50 EM 1/2X CT50 EM 5/8 X CT50 EM 5/8X CT50 EM 5/8X CT50 EM 3/4 X CT50 EM 3/4 X CT50 EM 3/4X CT50 EM 7/8 X CT50 EM 7/8X CT50 EM 7/8X CT50 EM 1 X CT50 EM 1 X CT50 EM 1 X CT50 EM 1-1/4X CT50 EM 1-1/4X CT50 EM 1-1/4X CT50 EM 1-1/2X CT50 EM 1-1/2X CT50 EM 1-1/2X CT50 EM 2 X dd B for internal coolant flange. 16
17 CT - THERM SHRINKIN HOER Taper Size CT T3 Taper HRc Ra 4µin G2.5 25,000 RPM max min 4 G d J esignation d min max J G Key* Hex CT40 SRK 1/8x M6 5/ CT40 SRK 1/8x M6 5/ CT40 SRK 3/16x M6 5/ CT40 SRK 3/16x M6 5/ CT40 SRK 1/4x M8 5/ CT40 SRK 1/4x M8 5/ CT40 SRK 5/16x M10 5/ CT40 SRK 5/16x M10 5/ CT40 SRK 3/8x M12 5/ CT40 SRK 3/8x M12 5/ CT40 SRK 7/16x M10 5/ CT40 SRK 7/16x M10 5/ CT40 SRK 1/2x M10 5/ CT40 SRK 1/2x M10 5/ * Metric 17
18 CT - THERM SHRINKIN HOER Taper Size CT-40 and T3 Taper HRc Ra 4µin G2.5 25,000 RPM M6 max min 4.5 G d 1 2 J esignation d min max J G Key * Hex CT40 SRKIN 1/4X M5 5/ CT40 SRKIN 5/16X M6 5/ CT40 SRKIN 3/8 X M8 5/ CT40 SRKIN 7/16X M10 5/ CT40 SRKIN 1/2 X M10 5/ CT40 SRKIN 5/8 X M12 5/ CT40 SRKIN 3/4 X M16 5/ CT40 SRKIN 7/8 X M16 5/ CT40 SRKIN 1 X M16 5/ CT40 SRKIN 1-1/4 X M16 5/ CT50 SRKIN 1/4 X3.500** M CT50 SRKIN 5/16X3.500** M CT50 SRKIN 3/8 X3.750** M CT50 SRKIN 7/16X3.750** M CT50 SRKIN 1/2 X3.750** M CT50 SRKIN 5/8 X3.750** M CT50 SRKIN 3/4 X4.000** M CT50 SRKIN 7/8 X4.000** M CT50 SRKIN 1 X4.000** M CT50 SRKIN 1-1/4 X4.000** M * Metric ** Balanced to G2.5 20,000RPM. 18
19 CT - SHE MI PTER Taper Size CT-40 and T3 Taper HRc Ra 4µin I G esignation I G CT40 SEM 1/2X /8-11 CT40 SEM 3/4X /8-11 CT40 SEM 1X /8-11 CT40 SEM 1-1/4X /8-11 CT40 SEM 1-1/2X /8-11 CT50 SEM 1/2X CT50 SEM 1/2X CT50 SEM 3/4X CT50 SEM 3/4X CT50 SEM 3/4X CT50 SEM 3/4X1.920X CT50 SEM 1X CT50 SEM 1X CT50 SEM 1X CT50 SEM 1X2.42X CT50 SEM 1-1/4X CT50 SEM 1-1/4X CT50 SEM 1-1/4X CT50 SEM 1-1/4X2.92X CT50 SEM 1-1/4X ? CT50 SEM 1-1/2X CT50 SEM 1-1/2X CT50 SEM 1-1/2X CT50 SEM 2X CT50 SEM 2X
20 CT - FCE MI HOER Taper Size CT T3 Taper HRc Ra 4µin 1 G 1 G1 2 esignation G G 1 CT50 FM2-1/2X /
21 CT - STUB RBOR HOER Taper Size CT-40 and T3 Taper HRc Ra 4µin /2 G 1 2 W esignation W G CT40 STUB 1X /8-11 CT40 STUB 1-1/4X /8-11 CT40 STUB 1-1/2X /8-11 CT50 STUB 1 X CT50 STUB 1-1/4X CT50 STUB 1-1/2X CT50 STUB 2 X
22 CT - RI CHUCK RBOR Taper Size CT-40 and T3 Taper HRc Ra 4µin K G esignation K G CT40 C J2X1.500 J /8-11 CT40 C J3X1.500 J /8-11 CT40 C J33X1.500 J /8-11 CT40 C J4X1.500 J /8-11 CT40 C J6X1.500 J /8-11 CT50 C J2 X1.500 J CT50 C J3 X1.656 J CT50 C J33X1.500 J CT50 C J4 X1.500 J CT50 C J5 X1.625 J CT50 C J6 X1.500 J
23 CT - PTER Taper Size CT T3 Taper HRc Ra 4µin 1 G G1 K esignation K 1 G 1 G CT50 ISO 40X70 ISO /
24 CT - MORSE TPER PTER Taper Size CT-40 and T3 Taper HRc Ra 4µin K G esignation K G CT40 MT 1X1.750 MT /8-11 CT40 MT 2X2.250 MT /8-11 CT40 MT 3X2.765 MT /8-11 CT40 MT 4X3.625 MT /8-11 CT50 MT 1X1.500 MT CT50 MT 2X2.000 MT CT50 MT 3X2.500 MT CT50 MT 4X3.375 MT CT50 MT 5X3.750 MT
25 CT - CENTER IGNMENT COET CHUCK Taper Size CT-40 and T3 Taper HRc Ra 4µin G2.5 20,000 RPM 2 3 (1) 1 Ref. G 2 1 (2) Hex Key (1) Hex Key (2) esignation Range G (mm) (mm) J CT40 ER / J CT50 ER
26 CT - CENTER IGNMENT SHNK N BSE Taper Size CT-40 and T3 Taper HRc Ra 4µin G2.5 20,000 RPM 1 2 (1) G 2 1 Hex Key (1) esignation G (mm) J CT / J CT
27 HSK - STNR TOOHOER IN69893 FORM STNR - METRIC l6 60 d2 d5 d4 d16 d10 max d1 b1 f3 f1 l1 f2 HSK- d 1 d 2 d 4 d 5 d 10 d 16 l 1 l6 b1 f1 f2 f M12x M16x M18x M20x M24x HSK - IN69893 FORM E - METRIC l4 60 d1 d4 max d2 d9 d8 d16 f3 f1 l1 f2 HSK-E d 1 d 2 d 4 d 8 d 9 d 16 l 1 l 4 f 1 f 2 f 3 32* M10X M12X M16X M18X * Without cross hole. 27
28 HSK - STNR TOOHOER IN69893 FORM F STNR - METRIC l4 l2 60 d2 d9 d8 5 d10 max 12 d1 l1 f3 f1 f2 HSK-F d 1 d 2 d 4 d 8 d 9 l 1 l 2 l4 f 1 f 2 f
29 HSK - ER COET CHUCK - METRIC Taper Size HSK-E 32, 40, 50 & HRc N5 G2.5 40,000 RPM 1 HSK J 2Ref 1Ref Ref Ref 1 Ref esignation HSK-E Range J HSK E 32 ER16 X HSK E 32 ER20 X HSK E 32 ER25 X HSK E 40 ER16 X HSK E 40 ER16 X M10 HSK E 40 ER20 X M12 HSK E 40 ER25 X M18X1.5 HSK E 40 ER32 X M22X1.5 HSK E 50 ER16 X 80* M10 HSK E 50 ER16 X 100* M10 HSK E 50 ER16 X 100M* (1) M10 HSK E 50 ER20 X 80* M10 HSK E 50 ER25 X 80* HSK E 50 ER32 X 80* HSK E 50 ER32 X 100* M22X1.5 HSK E 63 ER16 X 80* M10 HSK E 63 ER16 X 100* M10 HSK E 63 ER32 X 80** HSK E 63 ER32 X 100** M22X1.5 *Balance to G2.5 35,000RPM. **Balance to G2.5 30,000 RPM. (1)Equipped with nut ER 16 MINI. 29
30 HSK - ER MINI COET CHUCK - METRIC Taper Size HSK- 50, 63 and HRc N5 G2.5 20,000 RPM 1 HSK J 1Ref 2Ref Ref esignation HSK- Range J HSK 50 ER16X100 M M10 HSK 50 ER16X120 M M10 HSK 50 ER20X100 M M12 HSK 50 ER20X120 M M12 HSK 63 ER16X100 M M10 HSK 63 ER16X120 M M10 HSK 63 ER16X160 M M10 HSK 63 ER20X100 M M12 HSK 63 ER20X120 M M12 HSK 63 ER20X160 M M12 HSK 100 ER16X100 M* M10 HSK 100 ER16X160 M* M10 HSK 100 ER20X100 M* M12 HSK 100 ER20X160 M* M12 *Balance to G6.3 12,000RPM. 30
31 HSK - ER COET CHUCK - METRIC Taper Size HSK- 40, 50, 63 & HRc N5 G2.5 20,000 RPM 1 HSK J 2Ref Ref 1Ref esignation HSK- Range J HSK 40 ER16X M10 HSK 40 ER16X M10 HSK 40 ER16X M10 HSK 50 ER16X M10 HSK 50 ER16X M10 HSK 50 ER20X M12 HSK 50 ER20X M12 HSK 63 ER16X M10 HSK 63 ER16X M10 HSK 63 ER16X M10 HSK 63 ER20X M12 HSK 63 ER20X M12 HSK 63 ER20X M12 HSK 100 ER16X100* M10 HSK 100 ER16X160* M10 HSK 100 ER20X100* M12 HSK 100 ER20X160* M12 *Balance to G6.3 12,000 RPM. 31
32 HSK - ER COET CHUCK - METRIC Taper Size HSK- 40, 50, 63 & HRc N5 G2.5 20,000 RPM 1 HSK J 2 1Ref Ref esignation HSK- Range J HSK 40 ER25X HSK 40 ER25X M18x1.5 HSK 40 ER25X M16 HSK 40 ER32X M22x1.5 HSK 50 ER25X M16 HSK 50 ER25X M16 HSK 50 ER32X M22x1.5 HSK 50 ER32X M22x1.5 HSK 63 ER25X M16 HSK 63 ER25X M16 HSK 63 ER25X M16 HSK 63 ER25X M16 HSK 63 ER32X M22x1.5 HSK 63 ER32X M22x1.5 HSK 63 ER32X M22x1.5 HSK 63 ER32X M22x1.5 HSK 63 ER32X M22x1.5 HSK 63 ER40X HSK 63 ER40X M28x1.5 HSK 63 ER40X M28x1.5 HSK 100 ER25X100* M16 HSK 100 ER25X120* M16 HSK 100 ER25X160* M16 HSK 100 ER32X100* M22x1.5 HSK 100 ER32X120* M22x1.5 HSK 100 ER32X160* M22x1.5 HSK 100 ER40X100* M28x1.5 HSK 100 ER40X120* M28x1.5 HSK 100 ER40X160* M28x1.5 HSK 100 ER50X100* *Balance to G2.5 12,000 RPM. 32
33 HSK - ER COET CHUCK - METRIC Taper Size HSK-FM HRc N5 G2.5 30,000 RPM HSK FM 63 1 J Used for MKINO s machine models MG3, MG4 and V77. These tools are based on the HSK63F type with two drive pins which improve torque transmission. 2 Ref 1 Ref Ref esignation HSK FM Range J HSK FM 63 ER16x M10 HSK FM 63 ER16x M10 HSK FM 63 ER16x M10 HSK FM 63 ER16x M10 *The driving pins can be removed, turning the toolholder into a standard HSK F63 type. 33
34 HSK - ER COET CHUCK - METRIC Taper Size HSK-FM HRc N5 G ,000 RPM HSK FM 63 J 2 Ref Used for MKINO s machine models MG3, MG4 and V77. These tools are based on the HSK63F type with two drive pins which improve torque transmission. 1 Ref Ref esignation HSK FM Range J HSK FM 63ER32x HSK FM 63ER32x M22x1.5 HSK FM 63ER40x HSK FM 63ER40x M28x1.5 * The driving pins can be removed, turning the toolholder into a standard HSK F63 type. 34
35 HSK - EN MI HOER Taper Size HSK- 50, 63 and HRc Ra 4µin 1 For d>7/8 HSK d d esignation HSK- d 1 HSK 50 EM3/16 X HSK 50 EM1/4 X HSK 50 EM3/8 X HSK 50 EM1/2 X HSK 50 EM5/8 X HSK 50 EM3/4 X HSK 50 EM7/8 X HSK 50 EM1 X HSK 63 EM3/16 X HSK 63 EM1/4 X HSK 63 EM3/8 X HSK 63 EM1/2 X HSK 63 EM5/8 X HSK 63 EM3/4 X HSK 63 EM7/8 X HSK 63 EM1 X HSK 63 EM1-1/4X HSK 100 EM3/16 X HSK 100 EM1/4 X HSK 100 EM3/8 X HSK 100 EM1/2 X HSK 100 EM5/8 X HSK 100 EM3/4 X HSK 100 EM7/8 X HSK 100 EM1 X ? HSK 100 EM1-1/4X HSK 100 EM1-1/2X
36 HSK - THERM SHRINKIN HOER Taper Size HSK- 63 and HRc Ra 4µin G2.5 25,000 RPM 1 M6 max min 4 30 HSK d J 2 1 esignation d min max J Hex Key** HSK 63 SRKIN 1/4X M5 2.5 HSK 63 SRKIN5/16X M6 3.0 HSK 63 SRKIN 3/8X M8 4.0 HSK 63 SRKIN7/16X M HSK 63 SRKIN 1/2X M HSK 63 SRKIN 5/8X M HSK 63 SRKIN 3/4X M HSK 63 SRKIN 7/8X M HSK 63 SRKIN1 X M HSK 63 SRKIN1-1/4X M HSK 100 SRKIN 1/4X3.500* M5 2.5 HSK 100 SRKIN 1/4X4.750* M5 2.5 HSK 100 SRKIN 1/4X6.250* M5 2.5 HSK 100 SRKIN5/16X3.500* M6 3.0 HSK 100 SRKIN5/16X4.750* M6 3.0 HSK 100 SRKIN5/16X6.250* M6 3.0 HSK 100 SRKIN 3/8X3.625* M8 4.0 HSK 100 SRKIN 3/8X4.750* M8 4.0 HSK 100 SRKIN 3/8X6.250* M8 4.0 HSK 100 SRKIN7/16X3.750* M HSK 100 SRKIN7/16X4.750* M HSK 100 SRKIN7/16X6.250* M HSK 100 SRKIN 1/2X3.750* M HSK 100 SRKIN 1/2X5.000* M HSK 100 SRKIN 1/2X6.250* M HSK 100 SRKIN 5/8X4.000* M HSK 100 SRKIN 5/8X5.000* M HSK 100 SRKIN 5/8X6.250* M HSK 100 SRKIN 3/4X4.125* M HSK 100 SRKIN 3/4X6.250* M HSK 100 SRKIN 7/8X4.125* M HSK 100 SRKIN 7/8X6.250* M HSK 100 SRKIN 1X4.500* M HSK 100 SRKIN1-1/4X4.75* M * Balanced to G2.5 20,000 RPM. ** Metric
37 HSK - THERM SHRINKIN HOER - METRIC Taper Size HSK HRc N5 G2.5 max 25,000 RPM 1 M6 min 4 30 HSK d J 2 1 esignation d min max J Hex Key HSK 63 SRKIN 6X M5 2.5 HSK 63 SRKIN 6X M5 2.5 HSK 63 SRKIN 6X M5 2.5 HSK 63 SRKIN 8X M6 3.0 HSK 63 SRKIN 8X M6 3.0 HSK 63 SRKIN 8X M6 3.0 HSK 63 SRKIN 10X M8 4.0 HSK 63 SRKIN 10X M8 4.0 HSK 63 SRKIN 10X M8 4.0 HSK 63 SRKIN 12X M8 4.0 HSK 63 SRKIN 12X M HSK 63 SRKIN 12X M HSK 63 SRKIN 14X M HSK 63 SRKIN 14X M HSK 63 SRKIN 14X M HSK 63 SRKIN 16X M HSK 63 SRKIN 16X M HSK 63 SRKIN 16X M HSK 63 SRKIN 18X M HSK 63 SRKIN 18X M HSK 63 SRKIN 18X M HSK 63 SRKIN 20X M HSK 63 SRKIN 20X M HSK 63 SRKIN 20X M HSK 63 SRKIN 25X M HSK 63 SRKIN 32X M
38 HSK - THERM SHRINKIN HOER - METRIC Taper Size HSK HRc N5 G2.5 20,000 RPM 1 M6 max min 4 30 HSK d J 2 1 esignation d min max J Hex Key HSK 100 SRKIN 6X M5 2.5 HSK 100 SRKIN 6X M5 2.5 HSK 100 SRKIN 6X M6 3.0 HSK 100 SRKIN 8X M6 3.0 HSK 100 SRKIN 8X M6 3.0 HSK 100 SRKIN 8X M6 3.0 HSK 100 SRKIN 10X M8 4.0 HSK 100 SRKIN 10X M8 4.0 HSK 100 SRKIN 10X M8 4.0 HSK 100 SRKIN 12X M HSK 100 SRKIN 12X M HSK 100 SRKIN 12X M HSK 100 SRKIN 14X M HSK 100 SRKIN 14X M HSK 100 SRKIN 14X M HSK 100 SRKIN 16X M HSK 100 SRKIN 16X M HSK 100 SRKIN 16X M HSK 100 SRKIN 18X M HSK 100 SRKIN 18X M HSK 100 SRKIN 20X M HSK 100 SRKIN 20X M HSK 100 SRKIN 25X M HSK 100 SRKIN 32X M Use only inductive heating device for SRKIN holders. 38
39 HSK - ER COET CHUCK FOR MKINO MG3, MG4 N V77 MCHINE MOES Taper Size HSK FM HRc Ra 4µin G2.5 30,000 RPM 1 max min 4 30 HSK FM 63 d Ref J 1 Ref 2 Ref esignation d min max J Hex* HSK FM 63 SRKIN 1/4x M5 2.5 HSK FM 63 SRKIN 5/16x M6 3.0 HSK FM 63 SRKIN 3/8x M8 4.0 HSK FM 63 SRKIN 1/2x M8 4.0 HSK FM 63 SRKIN 5/8x M8 4.0 HSK FM 63 SRKIN 3/4x HSK FM 63 SRKIN 3/4x M HSK FM 63 SRKIN 1x HSK FM 63 SRKIN 1x M * Metric ** The driving pins can be removed, turning the toolholder into a standard HSK F 63 type. Used for MKINO s machine models MG3, MG4 and V77 These tools are based on the HSK 63 F type with two drive pins which improve torque transmission. 39
40 HSK - ER COET CHUCK FOR MKINO MG3, MG4 & V77 MCHINE MOES - METRIC Taper Size HSK-FM HRc Ra 4µin G2.5 max 30,000 RPM 1 M6 min 4 30 HSK FM 63 d Ref J 1 Ref 2 Ref esignation d min max J Hex HSK FM 63 SRKIN 6x M5 2.5 HSK FM 63 SRKIN 8x M6 3.0 HSK FM 63 SRKIN 10x M8 4.0 HSK FM 63 SRKIN 12x M HSK FM 63 SRKIN 14x M HSK FM 63 SRKIN 16x M HSK FM 63 SRKIN 18x M HSK FM 63 SRKIN 20x M HSK FM 63 SRKIN 25x M HSK FM 63 SRKIN 32x M ** The driving pins can be removed, turning the toolholder into a standard HSK F 63 type. Used for MKINO s machine models MG3, MG4 and V77 These tools are based on the HSK 63 F type with two drive pins which improve torque transmission. 40
41 HSK - THERM SHRINKIN HOER Taper Size HSK-E 32, 40, 50 & HRc Ra 4µin G2.5 40,000 RPM 1 max min 4 HSK d J 2 1 esignation d min max J Hex key*** HSK E 32 SRK1/8X M4 2.0 HSK E 32 SRK3/16X M4 2.0 HSK E 32 SRK1/4X M4 2.0 HSK E 32 SRK5/16X M4 2.0 HSK E 32 SRK3/8X M4 2.0 HSK E 32 SRK1/2X M4 2.0 HSK E 40 SRK1/8 X M5 2.5 HSK E 40 SRK1/8 X M5 2.5 HSK E 40 SRK3/16X M4 2.0 HSK E 40 SRK3/16X M4 2.0 HSK E 40 SRK1/4 X M5 2.5 HSK E 40 SRK1/4 X M5 2.5 HSK E 40 SRK5/16X M5 2.5 HSK E 40 SRK5/16X M6 3.0 HSK E 40 SRK3/8 X M5 2.5 HSK E 40 SRK3/8 X M8 4.0 HSK E 40 SRK7/16X M5 2.5 HSK E 40 SRK7/16X M HSK E 40 SRK1/2 X M5 2.5 HSK E 40 SRK1/2 X M HSK E 50 SRK1/8 X1.750* M5 2.5 HSK E 50 SRK1/8 X3.000* M5 2.5 HSK E 50 SRK3/16X1.750* M6 3.0 HSK E 50 SRK3/16X3.000* M6 3.0 HSK E 50 SRK1/4 X1.750* M5 2.5 HSK E 50 SRK1/4 X3.000* M5 2.5 HSK E 50 SRK5/16X1.750* M6 3.0 HSK E 50 SRK5/16X3.000* M6 3.0 HSK E 50 SRK3/8 X1.750* M6 3.0 HSK E 50 SRK3/8 X3.000* M8 4.0 HSK E 50 SRK7/16X1.750* M6 3.0 HSK E 50 SRK7/16X3.000* M HSK E 50 SRK1/2 X1.750* M6 3.0 HSK E 50 SRK1/2 X3.000* M HSK E 63 SRK1/8 X1.750** M6 3 HSK E 63 SRK1/8 X3.000** M6 3 HSK E 63 SRK3/16X1.750** M6 3 HSK E 63 SRK3/16X3.000** M6 3 HSK E 63 SRK1/4 X1.750** M8 4 HSK E 63 SRK1/4 X3.000** M8 4 HSK E 63 SRK5/16X1.750** M6 3 HSK E 63 SRK5/16X3.000** M6 3 HSK E 63 SRK3/8 X1.750** M8 4 HSK E 63 SRK3/8 X3.000** M8 4 HSK E 63 SRK7/16X1.750** M8 4 HSK E 63 SRK7/16X3.000** M10 5 HSK E 63 SRK1/2 X1.750** M8 4 HSK E 63 SRK1/2 X3.000** M10 5 * Balanced to G2.5 35,000 RPM ** Balanced to G2.5 30,000 RPM *** Metric 41
42 HSK - THERM SHRINKIN HOER - METRIC Taper Size HSK-E 32, 40, 50 & HRc N5 G2.5 40,000 RPM 1 max min 4 HSK d J 2 1 esignation d min max J Hex Key 42 HSK E 32 SRK 3X M4 2.0 HSK E 32 SRK 4X M4 2.0 HSK E 32 SRK 5X M4 2.0 HSK E 32 SRK 6X M4 2.0 HSK E 32 SRK 8X M4 2.0 HSK E 32 SRK 10X M4 2.0 HSK E 32 SRK 12X M4 2.0 HSK E 40 SRK 3X M5 2.5 HSK E 40 SRK 3X M5 2.5 HSK E 40 SRK 4X M5 2.5 HSK E 40 SRK 4X M5 2.5 HSK E 40 SRK 5X M4 2.0 HSK E 40 SRK 5X M4 2.0 HSK E 40 SRK 6X M5 2.5 HSK E 40 SRK 6X M5 2.5 HSK E 40 SRK 8X M5 2.5 HSK E 40 SRK 8X M6 3.0 HSK E 40 SRK 10X M5 2.5 HSK E 40 SRK 10X M8 4.0 HSK E 40 SRK 12X M5 2.5 HSK E 40 SRK 12X M HSK E 50 SRK 3X 45* M5 2.5 HSK E 50 SRK 3X 80* M5 2.5 HSK E 50 SRK 4X 45* M5 2.5 HSK E 50 SRK 4X 80* M5 2.5 HSK E 50 SRK 5X 45* M6 3.0 HSK E 50 SRK 5X 80* M6 3.0 HSK E 50 SRK 6X 45* M5 2.5 HSK E 50 SRK 6X 80* M5 2.5 HSK E 50 SRK 8X 45* M6 3.0 HSK E 50 SRK 8X 80* M6 3.0 HSK E 50 SRK 10X 45* M6 3.0 HSK E 50 SRK 10X 80* M8 4.0 HSK E 50 SRK 12X 45* M6 3.0 HSK E 50 SRK 12X 80* M HSK E 63 SRK 3X 45** M6 3 HSK E 63 SRK 3X 80** M6 3 HSK E 63 SRK 4X 45** M6 3 HSK E 63 SRK 4X 80** M6 3 HSK E 63 SRK 5X 45** M6 3 HSK E 63 SRK 5X 80** M6 3 HSK E 63 SRK 6X 45** M8 4 HSK E 63 SRK 6X 80** M8 4 HSK E 63 SRK 8X 45** M6 3 HSK E 63 SRK 8X 80** M6 3 HSK E 63 SRK 10X 45** M8 4 HSK E 63 SRK 10X 80** M8 4 HSK E 63 SRK 12X 45** M8 4 HSK E 63 SRK 12X 80** M10 5 HSK E 63 SRK 12X 90** M8 4 * Balanced to G2.5 35,000 RPM ** Balanced to G2.5 30,000 RPM
43 HSK - THERM SHRINKIN HOER Taper Size HSK HRc Ra 4µin N5 G2.5 25,000 RPM 1 max min 4 HSK d J 1 2 esignation d min max J Hex Key* HSK 63 SRK1/8 X M6 3 HSK 63 SRK1/8 X M6 3 HSK 63 SRK3/16X M6 3 HSK 63 SRK3/16X M6 3 HSK 63 SRK1/4 X M8 4 HSK 63 SRK1/4 X M8 4 HSK 63 SRK5/16X M6 3 HSK 63 SRK5/16X M6 3 HSK 63 SRK3/8 X M8 4 HSK 63 SRK3/8 X M8 4 HSK 63 SRK7/16X M8 4 HSK 63 SRK7/16X M10 5 HSK 63 SRK1/2 X M8 4 HSK 63 SRK1/2 X M10 5 * Metric 43
44 HSK - THERM SHRINKIN HOER - METRIC Taper Size HSK HRc Ra 4µin N5 G2.5 25,000 RPM 1 max min 4 HSK d J 2 1 esignation d min max J Hex Key HSK 63 SRK 3X M6 3 HSK 63 SRK 3X M6 3 HSK 63 SRK 4X M6 3 HSK 63 SRK 4X M6 3 HSK 63 SRK 5X M6 3 HSK 63 SRK 5X M6 3 HSK 63 SRK 6X M8 4 HSK 63 SRK 6X M8 4 HSK 63 SRK 8X M6 3 HSK 63 SRK 8X M6 3 HSK 63 SRK 10X M8 4 HSK 63 SRK 10X M8 4 HSK 63 SRK 12X M8 4 HSK 63 SRK 12X M8 4 44
45 HSK - SHE MI PTER Taper Size HSK-E 32, 40, 50 & HRc Ra 4µin G2.5 15,000 RPM HSK esignation HSK-E HSK E 32 SEM3/4 X HSK E 40 SEM3/4 X HSK E 50 SEM3/4 X HSK E 63 SEM3/4 X HSK E 63 SEM 1 X Face mill IN
46 HSK - SHE MI PTER Taper Size HSK- 50, 63 and HRc Ra 4µin G2.5 15,000 RPM HSK 1 G esignation HSK HSK 50 SEM3/4 X HSK 50 SEM1 X HSK 50 SEM1-1/4 X HSK 63 SEM3/4 X HSK 63 SEM1 X HSK 63 SEM1-1/4 X HSK 63 SEM1-1/2 X HSK 63 SEM2 X HSK 100 SEM3/4 X3.000* HSK 100 SEM1 X2.375* HSK 100 SEM1-1/4 X1.875* HSK 100 SEM1-1/2 X1.875* HSK 100 SEM2 X2.375* * Balanced to G6.3 12,000 RPM 46
47 HSK - FCE MI HOER Taper Size HSK HRc Ra 4µin G2.5 15,000 RPM HSK 1 G esignation * G 1 * HSK 100 FM2-1/2x /8-11 * Exists only in FM holders 47
48 HSK - SHE MI PTER - METRIC Taper Size HSK-E 32, 40, 50 & HRc N5 G2.5 15,000 RPM HSK esignation HSK-E HSK E 32 SEM 16x HSK E 32 SEM 22x HSK E 40 SEM 16x HSK E 40 SEM 22x HSK E 50 SEM 22X HSK E 63 SEM 16X HSK E 63 SEM 22X
49 HSK - SHE MI PTER - METRIC Taper Size HSK- 40, 50, 63 & HRc N5 G2.5 15,000 RPM 2 G1 HSK esignation HSK HSK 40 SEM HSK 40 SEM HSK 50 SEM 16X HSK 50 SEM 22X HSK 50 SEM 27X HSK 63 SEM 16X HSK 63 SEM 22X HSK 63 SEM 27X HSK 63 SEM 32X HSK 63 SEM 40X HSK 100 SEM 22X 50* HSK 100 SEM 27X 50* HSK 100 SEM 32X 50* HSK 100 SEM 40X 60* HSK 100 SEM 50X 70* * Balanced to G6.3 12,000 RPM 49
50 HSK - FCE MI HOER - METRIC Taper Size HSK HRc N5 G2.5 15,000 RPM 2 G1 HSK esignation HSK * G 1 * HSK 100 FM 60X M16 * vailable only FM holders 50
51 HSK - SHE MI PTER FOR MKINO MG3, MG4 N V77 MCHINE MOES Taper Size HSK-FM HRc Ra 4µin G2.5 30,000 RPM HSK FM 63 1 Used for MKINO s machine models MG3, MG4 and V77. These tools are based on the HSK 63 F type with two drive pins which improve torque transmission. 2 1 esignation HSK FM 63 SEM 3/4x HSK FM 63 SEM 3/4x HSK FM 63 SEM 1x
52 HSK - SHE MI PTER FOR MKINO MG3, MG4 N V77 MCHINE MOES - METRIC Taper Size HSK-FM HRc Ra 4µin G2.5 30,000 RPM HSK FM 63 1 Used for MKINO s machine models MG3, MG4 and V77. These tools are based on the HSK 63 F type with two drive pins which improve torque transmission. 2 1 esignation HSK FM 63 SEM 22x HSK FM 63 SEM 27x HSK FM 63 SEM 32x * The driving pins can be removed, turning the toolholder into a standard HSK F type. 52
53 HSK - MORSE TPER PTER - METRIC Taper Size HSK- 50, 63 and HRc N5 1 HSK K esignation HSK- K 1 HSK 50 MT1X MT HSK 50 MT2X MT HSK 50 MT3X MT HSK 63 MT1X MT HSK 63 MT2X MT HSK 63 MT3X MT HSK 63 MT4X MT HSK 100 MT1X MT HSK 100 MT2X MT HSK 100 MT3X MT HSK 100 MT4X MT HSK 100 MT5X MT * Balanced to G2.5 35,000RPM 53
54 HSK - SHORT ER COET CHUCK - METRIC Taper Size HSK- 63 and HRc N5 G2.5 20,000 RPM 2 Ref HSK G1 1 Ref Ref esignation HSK- Range 1 2 G 1 HSK 63 ER32 SHORT M40x1.5 HSK 100 ER32 SHORT M40x1.5 HSK 100 ER40 SHORT M50x1.5 54
55 HSK - BNK EN - METRIC Taper Size HSK- 50, 63 and HRc N5 HSK 2 1 esignation HSK HSK 50 B16MN HSK 50 B16MN HSK 63 B16MN HSK 63 B16MN HSK 100 B16MN HSK 100 B16MN Material: Case hardened alloy steel. Shank hardness 58 HRc minimum. Nose hardness HRc. 55
56 BT - TOOHOER STNR f1 1 f3 a '50" d3 G d6 d5 b 4 d1 d 20 max. 35 d12 e1 e1 BT MS 403 Shank a b (H 12 ) d d 1 G d 3 (H 8 ) d 5 d 6 (H 8 ) f 1 ±0.1 BT M BT M BT M Shank f 3 1 ±0.2 4 MIN e 1 ±0.1 d 12 TPER T3 BT BT BT
57 BT - ER COET CHUCK - METRIC Taper Size BT 30, 40 and T3 Taper HRc N5 G2.5 20,000 RPM 1 G J 2Ref 1Ref Ref esignation Range G J BT30 ER16X70* M12 M10 BT30 ER16X100* M12 M10 BT30 ER20X70* M12 M12 BT40 ER16X M16 M12 BT40 ER16X M16 M12 BT40 ER16X M16 M12 BT40 ER16X M16 M10 BT40 ER20X M16 M12 BT40 ER20X M16 M12 BT40 ER20X M16 M12 BT40 ER20X M16 M12 BT50 ER16X100* M24 M12 BT50 ER16X125* M24 M12 BT50 ER16X150* M24 M12 BT50 ER16X200* M24 M10 BT50 ER20X100* M24 M12 BT50 ER20X125* M24 M12 BT50 ER20X150* M24 M12 BT50 ER20X200* M24 M12 dd B for coolant through the flange. * Balanced to G6.3 at 12,000RPM 57
58 BT - ER COET CHUCK - METRIC Taper Size BT 30, 40 and T3 Taper HRc N5 G ,000 RPM G J 2Ref 1Ref Ref esignation Range G J BT30 ER25X 60* M12 M16 BT30 ER32X 60* M12 M16 BT40 ER25X M16 M16 BT40 ER25X M16 M16 BT40 ER25X M16 M16 BT40 ER32X M16 M22x1.5 BT40 ER32X M16 M22x1.5 BT40 ER32X M16 M22x1.5 BT40 ER32X M16 M22x1.5 BT40 ER32X M16 M22x1.5 BT40 ER40X M16 M28x1.5 BT40 ER40X M16 M28x1.5 BT40 ER40X M16 M28x1.5 BT40 ER40X M16 M28x1.5 BT40 ER50X M16 M28x1.5 BT50 ER25X100* M24 M16 BT50 ER25X150* M24 M16 BT50 ER25X200* M24 M16 BT50 ER32X100* M24 M22x1.5 BT50 ER32X125* M24 M22x1.5 BT50 ER32X150* M24 M22x1.5 BT50 ER32X200* M24 M22x1.5 BT50 ER40X100* M24 M28x1.5 BT50 ER40X150* M24 M28x1.5 BT50 ER40X200* M24 M28x1.5 BT50 ER50X100* M24 M36x1.5 BT50 ER50X150* M24 M36x1.5 dd B for coolant through the flange. * Balanced to G6.3 at 12,000 RPM 58
59 BT - SHORT ER COET CHUCK - METRIC Taper Size BT 30, 40 and T3 Taper HRc N5 G2.5 20,000 RPM Ref 1Ref G1 G J esignation Range 1 J G G 1 BT30 ER20 SHORT M12 M12 M25x1.5 BT40 ER32 SHORT M16 M16 M40x1.5 BT40 ER40 SHORT M16 M16 M50x1.5 BT50 ER32 SHORT M22x1.5 M24 M40x1.5 BT50 ER40 SHORT M28x1.5 M24 M50x1.5 dd B for coolant through the flange 59
INDUSTRIAL SELF TIGHTEN INDUSTRIAL CHUCKS FOR COLUMN OR CNC DRILLING MACHINE
108 Drill chucks & accessories Pink
Supercut Spade Drill System
rill wide range of sizes with just one drill PMS 298 (Light lue) PMS (Text Metal Effect) 7 1 NEW EXTENE RANGE OR 214 TECH NEWS 7 PMS (Text Metal Effect) 1 Spade rill Holders Technical Guide Spade rill
MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Super. Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY EDITION 2019 High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
Tabela 1. Table 1 working slat. Spare parts. Rear-attached disc mower Z108/8 2,5m with swath spreader
1 2 12 2 1 2 1 1 2 21 2 2 2 0 2 11 2 1 1 2 2 1 1 1 Tabela 1 Table 1 working slat Table 1 Cat. No. or Standard Qty No. Part name Z/ 2.m Z/ Working slat set. Contains: tab.1. pos.: 1- /1-000 tab.2. pos.:
RDN-250i Application / Benefits Model No. Servo Motor Maker SPECIFICATIONS Table Dia. Horizontal [kg] Center Height Resister Dia.
![RDN-250i Application / Benefits Model No. Servo Motor Maker SPECIFICATIONS Table Dia. Horizontal [kg] Center Height Resister Dia.](/thumbs/90/101861915.jpg "RDN-250i Application / Benefits Model No. Servo Motor Maker SPECIFICATIONS Table Dia. Horizontal [kg] Center Height Resister Dia.")
RDN-250i Zero Backlash High-Definition Split System with ROLLER CAM DRIVE Zero Backlash with ROLLER CAM DRIVE Table Dia. 232 Center Height 210 105 Spindle Through Hole Dia. 70 Pneumatic Allowable Work
GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
KE434C Electronic lockstitch pattern tacker. 20,000 stitches (including 10,000 stitches which can be added.)
KE-434C Electronic Lockstitch Pattern Tacker KE-435C Electronic Lockstitch Pattern Tacker with Stepping Foot KE-434C-X KE-435C 1 Medium-weight 2 Heavy-weight Specifications Stitch formation Max. sewing
ROTARY TABLE SELECTION GUIDE
ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES RNE-SERIES RA-SERIES RBS-SERIES RN-MUTI SERIES (SHON
Small hole drilling. Page. H19 (3/4) Integral drill steels...5. H22 (7/8") Integral drill steels...6. Reaming tools...7
Page H19 (3/4) Integral drill steels...5 H22 (7/8") Integral drill steels...6 Reaming tools...7 H22 Tapered tools, 12 taper...8 H22 Tapered tools, 11 taper...9 Stone working tools...10 R22 (7/8") Extension
10.01. COLLET CHUCKS WITH SPRING COLLETS 6-8 - 9,5 Page 10.03. BUSHINGS Page 10.03. SETTING RINGS Page 10.03. DRILL HOLDERS Page 10.
10 BUSHINGS Page 10.03 COLLET CHUCKS WITH SPRING COLLETS 6-8 - 9,5 Page 10.03 SETTING RINGS Page 10.03 DRILL HOLDER-SLEEVE Page 10.03 DRILL HOLDERS Page 10.04 EXTENSION SHAFTS Page 10.04 EXTENSION SHAFTS
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Spindle Production Department
SPINDLE SERIES Spindle Production Department 1 2 Quality control & Accuracy measurement 1 2 1 Leitz pmm-c (Accuracy Grade.). 2 Concentricity & roundness measuring. Components inspection. 5 7 1 Single component
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 5 Part name Material Flammability FEATURES Cover Stainless steel (SUS 4) Slider Housing Moving ontat Fixed ontat pin Polyamido Polyphenylenesulphide Copper
CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
Group 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
Operating Instructions and Parts Manual 16-speed Woodworking Drill Press Models JDP-15F, JDP-15B
Operating Instructions and Parts Manual 16-speed Woodworking Drill Press Models JDP-15F, JDP-15B JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-716250 Ph.: 800-274-6848 Edition 1 10/2015
ΠANEΠIΣTHMIO ΠATPΩN TMHMA MHXANOΛOΓΩN ΚΑΙ ΑΕΡΟΝΑΥΠΗΓΩΝ MHXANIKΩN
ΠANEΠIΣTHMIO ΠATPΩN TMHMA MHXANOΛOΓΩN ΚΑΙ ΑΕΡΟΝΑΥΠΗΓΩΝ MHXANIKΩN Εργαστήριο Συστημάτων Παραγωγής και Αυτοματισμού Διδάσκων: Αναπλ. Καθηγητής Δ. Μούρτζης ΑΡΙΘΜΗΤΙΚΟΣ ΕΛΕΓΧΟΣ ΕΡΓΑΛΕΙΟΜΗΧΑΝΩΝ CNC Εργαστηριακή
Part II: Earthing system components.
Μέρος IΙ: Εξαρτήματα Συστημάτων γείωσης. Part II: Earthing system components. Τίτλος Ηλεκτρόδια γειώσεως Earth Electrodes Title Ράβδος γειώσεως κυκλικής διατομής Round Earthing Rode 182161415 t(250) St/e-Cu
SIEMENS Squirrel Cage Induction Standard Three-phase Motors
- SIEMENS Squirrel Cage Induction Standard Three-phase Motors 2 pole 3000 rpm 50Hz Rated current Power Efficiency Rated Ratio Noise Output Frame Speed Weight 3V 400V 415V factor Class 0%Load 75%Load torque
MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
ATLANTIS 150 ENGINE PARTS
ATLANTIS 150 ENGINE PARTS E-1 CYLINDER HEAD COVER 1 12310-FYIQ2-000 COVER, CYLINDER HEAD 1 2 12312-FYDQ-000 OIL FENDER 1 3 GB/T845-ST4.2*8-A2G CROSS TAPPING BOLT M4*8 4 4 90103-06025-00F5J HEX. FLANGE
Siemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
Synchronous motors Siemens 2009 FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height n red S P red ΔT=00 K rpm kw (P) Red power Stic torque M 0 ΔT=00 K Red torque ) M red ΔT=00
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
!"#$%&'()**+, Product Line-Up !"#$%!"#$$
!"#$%!"#$$!"#$%&'()**+,,,,(-./.0/12345667(/6.!!"#$%&#&'()*+$(!"#$%&'()'*+&$,-.$/0&'*123#$42'50&'1*067#$829:)0*(2#$850&'1')9#$;&+0)
ΓΙΑ ΤΗΝ ΑΝΑΘΕΣΗ ΤΗΣ ΠΡΟΜΗΘΕΙΑΣ: «Προμήθεια Αναλωσίμων»
ΠΡΟΣΚΛΗΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ KAI ΚΑΤΑΘΕΣΗΣ ΠΡΟΣΦΟΡΩΝ ΕΘΝΙΚΟ ΚΕΝΤΡΟ ΕΡΕΥΝΑΣ ΚΑΙ ΤΕΧΝΟΛΟΓΙΚΗΣ ΑΝΑΠΤΥΞΗΣ (Ε.Κ.Ε.Τ.Α.)/ ΙΝΣΤΙΤΟΥΤΟ ΧΗΜΙΚΩΝ ΔΙΕΡΓΑΣΙΩΝ ΚΑΙ ΕΝΕΡΓΕΙΑΚΩΝ ΠΟΡΩΝ (ΙΔΕΠ) 6 ο χλμ. Χαριλάου Θέρμης 57001
Oil grooved pads PFO series
Oil grooved pads PFO series Connector type Top Side Pad with locking fitting PFO K φ20 ~ 40 P237 Barb connector PFOTK PFOYK Pad with spring fitting NAPFO S Stroke(mm) φ20 ~ 40 6,15,30 P239 Female screw
Μηχανές Ηλεκτροσύντηξης & Μετ. Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης PΕ100 Υδρόμετρα Αντλίες
Units For Electro-fusion & utt-fusion Electro-fusion & utt-fusion Fittings PE00 Hydrometers Pumps Μηχανές Ηλεκτροσύντηξης & Μετ. Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης PΕ00 Υδρόμετρα
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Spare Parts P2~P6. Screws. Cartridges Clamp Sets Clamps Chipbreakers Wrenches Wrenches / Springs / Nuts / Punches / Others P13~P14 P15 P17~P18
1~18 Screws ins Shims artridges lamp Sets lamps hipbreakers Wrenches Wrenches / Springs / Nuts / unches / Others 2~6 7 8~12 12 13~14 15 16 17~18 18 1 Screws imension (mm) ngle ( ) Torque escription (N
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Dimensional Data - All tolerances (± 0.01) inches. 5.33 x 6.60.21" x.26" (Typ. 2) 11.68 x 12.95.46" x.51" (Typ. 2)
0-700 Volts, 100 Amps Bussmann BH-0 Series Dimensional Data - All tolerances (± 0.25) mm (± 0.01) inches B 54.23 2.135" 71.42 2.812" Catalog Symbol: BH-0 Series Base: Light-weight, high temperature thermoplastic
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
Parts catalogue LAWN MOWER
OREC ISSUED NO. GR535PRO-1 Parts catalogue LAWN MOWER (EXPORT MODEL) GR535PRO(2Action) MODEL GR535PRO CODE 0278- CONTENTS Fig.1 GEAR CASE------------------------------------------------------------ 1 Fig.2
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Ε Κ Ο Σ Η I S S U E 1 9. Bίδα Fasteners
Ε Κ Ο Σ Η I S S U E 1 9 Bίδα Fasteners Βίδα DIN 1 A1 Πύρος κωνικός Taper pin d 1 1,5 2 3 4 5 6 8 10 l 8-18 8-20 10-36 12-60 12-50 16-60 20-70 28-100 32-100 DIN 7 A1 ISO 2338 Πύρος κυλινδρικός Cylindrical
New typologies in S350 system Νέες τυπολογίες στην σειρά S350. «Fixed + Sliding + Fixed» typologies with sliding sash either inside or outside
10. PR. 2017 FETURES Description Profiles Typology omments Notes New typologies in system Νέες τυπολογίες στην σειρά «Fixed + Sliding + Fixed» typologies with sliding sash either inside or outside Τυπολογία
Biodiesel quality and EN 14214:2012
3η Ενότητα: «Αγορά Βιοκαυσίμων στην Ελλάδα: Τάσεις και Προοπτικές» Biodiesel quality and EN 14214:2012 Dr. Hendrik Stein Pilot Plant Manager, ASG Analytik Content Introduction Development of the Biodiesel
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
DEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
PCD CBN CVD Diamond. (Element Six TM )
PCD CBN CVD Diamond (Element Six TM ) 01744 889726 sales@rainfordprecision.com PCD/CVD/CBN cutting tools Table of Contents PCD End mills (CVD & CBN upon request) REF. 4010 Page PCD End mills with ball
SHRINK TUNNEL. uline.com TUNNEL ASSEMBLY
TUNNEL ASSEMBLY 27 3 28 1 2 8 23 28 21 30 2 30 3 3 2 1 2 0 17 1 17 7 13 0 2 31 1 18 2 0 3 3 3 38 3 1 PAGE 1 OF 8 TUNNEL ASSEMBLY PARTS LIST 1 Base Frame 1 ------------ C0 2 Tunnel Hood Frame 1 ------------
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Groove Milling High Precision Tools for Groove Milling
Groove Milling High Precision Tools for Groove Milling METRIC Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove Milling tools, for miniature and small
DIAMO VELOCITY 50cc ENGINE PARTS CATALOG
DIAMO VELOCITY 50cc ENGINE PARTS CATALOG First Edition January 2008 Copyright 2004-2008 LS MotorSports, LLC. Reproduction without written permission is completely forbidden. The information and diagrams
DC SERVO MOTORS. EC057B Series Salient Characteristics E E
US: + 267 933 25 Europe: +33 2 92 87 5 sia: +86 2 5763 58 Harleysville, P 438 DC SERO MOTORS 238XXXXNC Series BRUSHESS DC MOTORS The EC57B series brushless motor is a high torque model brushless motor
ED. 07/2010 ED. 07/2008 PART CATALOGUE TRUCK WHEEL BALANCER
ED. 07/2010 ED. 07/2008 PART CATALOGUE TRUCK WHEEL BALANCER ELECTRIC PANEL TAV.1.0 WHEEL GUARD TAV.2.0 SHAFT ASSEMBLY TAV.3.0 BODY AND COVERS TAV.8.0 DRIVING/BRAKING MECHANISM TAV.4.0 DISTANCE GAUGE TAV.7.0
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
COMPOSITE INSULATOR. ANSI Standard Type COMPOSITE LONGE ROD SUSPENSION INSULATOR. PDI 16mm Diameter Rod Deadend Insulators
COMPOSITE LONGE ROD SUSPENSION INSULATOR PDI 16mm Diameter Rod Deadend Insulators Mechanical Characteristics Item of Length Diameter Net Wt. Torsion SML RTL Proof Cat. Sheds (kg) (N-m) (kn) (kn) (kn) 1
Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You
Replacement Guide Wilo Circulators for Heating and Secondary Hot Water Circulation 2013 Pioneering for You Grundfos Single pumps Wilo new High-efficiency pumps infinitely variable, 1~230V, 50Hz Stratos
Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
2.4mm Series Connectors
2.4mm Series Connectors Table of Contents 2.4mm Series Connectors(DC~50GHz)... 1 2.4mm Replaceable Connectors... 2 2.4mm Receptacle (Round Contact) Connectors... 7 2.4mm Receptacle (Exposed Teflon) Connectors...
Injection Molded Plastic Self-lubricating Bearings
Injection Molded Plastic Self-lubricating Bearings Injection Molded Plastic Self-lubricating Bearings CSB-EPB : Injection molded thermoplastic P-P CSB-EPB Plastic Compound Bearings RoHS Structure CSB-EPB
Groove Milling. High Precision Tools for Groove Milling INCH. Innovative Grooving & Turning Solutions
Groove Milling High Precision Tools for Groove Milling INCH Innovative Grooving & Turning Solutions Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove
TIRE CHANGER GT REVISION A-06
0 0 0 0 0 0 0 TIRE CHANGER GT0.00.00 REVISION A-0 GT0.00.00 TIRE CHANGER A-0 000 SCREW MX0-N 0000 PRESS COVER 0000 TURNTABLE ASSEMBLY 0000 SCREW MX0 000 PLAIN WASHERS 000 CLAMP RING 0000 BPLT MX--N 000
E-1:(Cylinder head assembly)
E-1:(Cylinder head assembly) 1 2.20.0101.10010 DD255FM-0101100 (Head comp,cylinder) 1 2 2.30.0101.0220R DD150-4-0101022 (Bolt stud M6 35) 4 3 2.20.0108.0060S DD250E-0108006A Bolt M6 65 1 4 2.99.43.060000R
Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3
Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3 Model #714500 shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-714500 Ph.: 800-274-6848
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
RSX Series. Radius Cutter for Machining of Stainless Steel and Exotic Material. Non-ferrous Metal. High Performance Milling Systems.
High Performance illing Systems RSX Series Radius Cutter for achining of Stainless Steel and Exotic aterial. Non-ferrous etal Stainless Steel Exotic aterial RSX Features & Benefits Wide application range
Spare Parts. Cartridges. Chipbreakers Wrenches / Spanners Springs / Washers / Plugs / Nuts / Punches
1~20 Screws ins Shims artridges lamps lamp Sets hipbreakers Wrenches / Spanners Springs / Washers / lugs / Nuts / unches 2~6 7 8~11 12 13 14~15 16 17~18 19 1 Screws escription imension (mm) ngle ( ) H
ΗΛΕΚΤΡΙΚΟΣ ΔΙΑΔΡΟΜΟΣ FT-200
ΗΛΕΚΤΡΙΚΟΣ ΔΙΑΔΡΟΜΟΣ FT-200 ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ ΠΕΡΙΕΧΟΜΕΝΑ 1. ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ --------------------------------- P1 2. ΠΡΟΦΥΛΑΞΕΙΣ --------------------------------- P2-P3 3. ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ ---------------------------------
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
PREMIER SERIES BY P1206RB-7
PREMIER SERIES BY P1206RB-7 1. Casting Mechanism Line Part Number Description Qt. Notes 1 100 1001 Face plate 1 2 100 1002 Screw 2 3 100 1003 Thread guide 1 4 100 1004 Thread guide
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
HΛΕΚΤΡΙΚΟΣ ΙΑ ΡΟΜΟΣ UPOWER 202
HΛΕΚΤΡΙΚΟΣ ΙΑ ΡΟΜΟΣ UPOWER 202 Ευχαριστούµε που διαλέξατε τα όργανα γυµναστικής µας. Για καλύτερα αποτελέσµατα και για αποφυγή τραυµατισµών, πάντα να κάνετε ασκήσεις προθέρµανσης πριν χρησιµοποιήσετε τον
Parts catalogue LAWN MOWER
OREC ISSUED NO. GRH535PRO-3 Parts catalogue LAWN MOWER (EXPORT MODEL) GRH535PRO(2Action) MODEL GRH535PRO CODE 0276- CONTENTS Fig. 1 GEAR CASE -------------------------------------- 1 Fig. 2 GEAR CASE INSIDE,
1 2 3 1) Milling Cutting heads Insert screw (thread) Key (Torx Plus) Screwdriver (Torx Plus)
GNRAL TURNING Spare parts CoroTurn SL cutting heads T-Max P lever design 1 2 3 4 5 6 Cutting heads Lever Screw Key (mm) Shim For insert Thickness (radius) Shim pin Shim pin punch R/L 571.31C-323222-12
IABPF/ABPF. Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULAR STYLE FEATURES
Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULA STYLE FEATUES ATH Coated Inserts are ideal for high-speed and high-efficiency machining of hardened steels ACS Coated Inserts are
MIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
T624 IT REVISION A-24 TIRE CHANGER
T IT.00.00 REVISION A- TIRE CHANGER 0 0 0 0 0 0 0 0 0 T IT.00.00 TIRE CHANGER A- 00000 WASHER 0000 SCREW MX-N 0000 INFLATOR COVER ASSEMBLY 000 SCREW MX 0000 PRESS COVER 0000 TURNTABLE ASSEMBLY 0000 SCREW
Drum Head Assembly Exploded View
Drum Head Assembly Exploded View 27 Drum Head Assembly Parts List 1...70-4102... Motor... 1-3/4HP, 115V... 1...70-4102MF... Motor Fan (not shown)...... 1...70-4102MFC... Motor Fan Cover (not shown)......
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V
Pn kw PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 VOLTAGE Speed RPM Eff % P.F. COSΦ LRT LRA RLA BDT Noise LwdB(A) W kg J Kgm2 380 400 415 63 M1 0.18 0.53 0.50 0.48 2720 65.0 0.80 2.3 5.5 2.2 50 14.00031
High Efficiency Machining Center. V-12iP/V-20S/V-30S/V-30M V-40L/V-40M/V-50L V-60S/V-60i/V-80i LEADWELL CNC MACHINES MFG., CORP.
High Efficiency Machining Center V-12iP/V-2S/V-3S/V-3M V-4L/V-4M/V-L V-6S/V-6i/V-8i No. 23 Gong 33th Road, Taichung Industrial Park Taichung 4, Taiwan T: 886-4 - 239188 / F: 886-4 - 239, 886-4 - 23938
Territory 500cc Engine Parts Manual
Territory 500cc Engine Parts Manual 1. CYLINDER HEAD 1 Cylinder Head Assy(EFI Engine) 1 Cylinder Head Assy(Carburetor Engine) 1 2. CYLINDER HEAD 1 12200-F18-0000 Cylinder Head Comp(EFI Engine) 1 2 91201-F11-0000
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
1 9/64 1 7/64 1 1/16 1 1/32 1 1/16 1 1/32 1 3/8 1 11/ / /64 1 1/4 1 7/ Hex 22*108(7/8*4 1/4) 1 3/16 1 9/ / /32
Integral Drill Rod Integral Drill Steel Series D mm inch mm ft inch L 9 1 9/ 00 1' " 001909 1.0 1 7/ 00 ' 7" 00190.10 Hex 19*10(7/* 1/) 1 7 1 1/1 1 1/ 100 00 ' " 7' 10" 001917 0019.90.0 1 00 10' " 0019
1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
THREAD TURNING CONTENTS. Technical Information 30. External Toolholders 34. Inrernal Toolholders 35. Thread Turning Inserts 36
THREA TURNING CONTENTS Technical Information 0 N External Toolholders Inrernal Toolholders Thread Turning s Kit with ifferent s External U-Toolholders Inrernal U-Toolholders U-Thread Turning s Toolholders,
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
SPARE PARTS ORDER LIST
SPARE PARTS ORDER LIST GODEX EZ-DT-4 Godex Spare Part Order List EZ-DT-4 Release Version:V. Release Date:200.06.5 CHAPTER PRINTER ASSEMBLY PARTS LIST... 2. THERMAL PRINT HEAD MODULE... 2.2 MAIN BOARD ASSEMBLY
500HSF. CYLINDER HEAD No. Part No. Description Q TY
500HSF CYLINDER HEAD No. Part No. Description Q TY 1 12200-F18-0000 Cylinder Head Comp(EFI Engine) 1 2 91201-F11-0000 O-Ring 58 2.4 2 3 12361-F11-0000 Value Cover 2 4 70.1-6-20 Inner Hexangular Screw M6
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3
Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3 Model #714500 shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-714500 Ph.: 800-274-6848
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging