Type. Capacities. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com LWN E
|
|
|
- Τελαμών Λόντος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Type 526 Flanged Safety Relief Valves spring loaded Capacities The-Safety-Valve.com LWN E
2 Approvals Orifice D E T Europe Coefficient of discharge K dr PED/DIN EN ISO Approval No Z0012/2/26 12/2013 S/G 0.45 L Germany Coefficient of discharge w PED/AD 2000-Merkblatt A2 Approval No. TÜV SV /2012 S/G 0.45 United States L Coefficient of discharge K ASME Sec. VIII Div. 1 Approval No. M37246 M37224 Canada S/G Rated slope acc. to ASME VIII. Div. 1 UG-131 (d) (2) G: 1.99 SCFM/psia S: 5.59 lb/hr/psia 1 Approval No. M37257 M37235 L Rated slope acc. to ASME VIII. Div. 1 UG-131 (d) (2) GPM/ psid Coefficient of discharge K Canada: CRN Approval No. For current approval no. see S/G L Rated slope acc. to ASME VIII. Div. 1 UG-131 (d) (2) G: 1.99 SCFM/psia S: 5.59 lb/hr/psia 1 Rated slope acc. to ASME VIII. Div. 1 UG-131 (d) (2) GPM/ psid China Coefficient of discharge w AQSIQ Approval No. For current approval no. see S/G 0.45 L Eurasian Custom Union Coefficient of discharge w EAC Approval No. For current approval no. see Classification societies Homepage Bureau Veritas BV Det Norske Veritas DNV Germanischer Lloyd GL Lloyd s register EMEA LREMEA U.S. Coast Guard U.S.C.G www uscg.org ClassNK NIPPON Kaiji Kyokai (Japan) S/G 0.45 L The valid certification number is changed with every renewal. For a sample certificate including the valid certification number see 89
3 Capacities Steam Metric units Capacities for saturated steam according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure. Capacities at 1 bar (14.5 psig) and below are based on 0.1 bar (1.45 psig) overpressure. AD 2000-Merkblatt A2 [kg/h] d 0 [mm] A 0 [mm 2 ] LEO S/G [inch 2 ] Set pressure [bar] Capacities [kg/h] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
4 Capacities Steam US units Capacities for saturated steam according to ASME Section VIII (UV), based on set pressure plus 10% overpressure. Capacities at 2.07 bar (30 psig) and below are based on 7 bar (3 psig) overpressure. ASME Section VIII [lb/h] d 0 [inch] A 0 [inch 2 ] LEOS/G [inch 2 ] Set pressure [psig] Capacities [lb/h] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
5 Capacities Air Metric units Capacities for air according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure at 0 C and 1013 mbar. Capacities at 1 bar (14.5 psig) and below are based on 0.1 bar (1.45 psig) overpressure. AD 2000-Merkblatt A2 [m n3 /h] d 0 [mm] A 0 [mm 2 ] LEOS/G [inch 2 ] Set pressure [bar] Capacities [m n 3 /h] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
6 Capacities Air US units Capacities for air according to ASME Section VIII (UV), based on set pressure plus 10 % overpressure at 16 C (60 F). Capacities at 2.07 bar (30 psig) and below are based on 7 bar (3 psig) overpressure. ASME Section VIII [S.C.F.M.] d 0 [inch] A 0 [inch 2 ] LEOS/G [inch 2 ] Set pressure [psig] Capacities [S.C.F.M.] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
7 Capacities Water Metric units Capacities for water according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure at 20 C (68 F). Capacities at 1 bar (14.5 psig) and below are based on 0.1 bar (1.45 psig) overpressure. AD 2000-Merkblatt A2 [10 3 kg/h] d 0 [mm] A 0 [mm 2 ] Set pressure [bar] LEOF [inch 2 ] Capacities [10 3 kg/h] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
8 Capacities Water US units Capacities for water according to ASME Section VIII (UV), based on set pressure plus 10 % overpressure at 21 C (70 F). Capacities at 2.07 bar (30 psig) and below are based on 7 bar (3 psig) overpressure. ASME Section VIII [US-G.P.M.] d 0 [inch] A 0 [inch 2 ] Set pressure [psig] LEOF [inch 2 ] Capacities [US-G.P.M.] Grey marked: LESER high pressure design. Set pressures and capacities exceed the limits of API
9 Determination of coefficent of discharge in case of lift restriction or back pressure Diagram for evaluation of ratio of lift / flow diameter (h/d 0) in reference to the coefficient of discharge (K dr/ w) Note: Lift restriction not approved for ASME-applications. Legend h d 0 h/d 0 = Lift [mm] = Flow diameter [mm] of selected safety valve, refer to table article numbers = Ratio of lift / flow diameter p a0 = Back pressure [bar a] p 0 = Set pressure [bar a] p a0/p 0 = Ratio of back pressure / set pressure K dr = Coefficient of discharge acc. to DIN EN ISO w = Coefficient of discharge acc. to AD 2000-Merkblatt A2 K b = Back pressure correction factor acc. to API 520 topic Steam and gases K dr = α w = f (h/d 0 ) Liquids K dr = α w = f (h/d 0 ) Orifice E-K "S/G" Orifice E-K "L" Coefficient of discharge K dr / αw Orifice L-T "S/G" Orifice D "S/G" , Ratio of lift / flow diameter h / d 0 Coefficient of discharge K dr / αw Orifice L-T "L" Orifice D "L" Ratio of lift / flow diameter h / d 0 Diagram for evaluation of coefficient of discharge (K dr/ w) or K b in reference to the ratio of back pressure / set pressure (p a0 /p 0) Orifice D K dr = α w = f (p a0 /p 0 ) and K b = f (p a0 /p 0 ) dr Orifice E T K dr = α w = f (p a0 /p 0 ) and K b = f (p a0 /p 0 ) dr 0 Coefficient of discharge K dr / αw Orifice D "S/G" Ratio of back pressure / set pressure p a0 / p Back pressure correction factor K b Coefficient of discharge K dr / αw Orifice E-T "S/G" Ratio of back pressure / set pressure p a0 / p 0 Back pressure correction factor K b 96
Type 441 DIN 442 DIN. Capacities. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com LWN E
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded Capacities The-Safety-Valve.com LWN 462.03-E Approvals Approvals DN I 20 200 DN O 32 300 Actual Orifice diameter d0 [mm] 18 165 Actual Orifice
Type. Capacities. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com LWN E
Type 441, 442 Full nozzle DIN Flanged Safety Relief Valves spring loaded Capacities The-Safety-Valve.com LWN 468.3-E Approvals Approvals DN O 5 65 8 Actual Orifice diameter d [mm] 23 37 46 Europe Coefficient
Type 441 DIN 442 DIN. Flanged Safety Relief Valves spring loaded
Type 442 DIN Plain lever H3 Open bonnet Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 441 DIN Packed lever H4 Closed bonnet Materials 01/02 Balanced bellows
Available Specification & Size of CSAC Aluminium Products
Available Specification & Size of CSAC Aluminium Products 1. Casting Ware Application Specification Alloy Temper or sand mode, shell mode & metal mode. JIS H5202 AC2A, AC2B, AC3A, AC4B, AC4C, AC7A, AC7B,
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
ΑΓΙΑ ΤΡΙΑ Α U-3020. 70 barg. 38,4 barg / 66,4 barg. 37,9 barg / 66,4 barg ΕΠΙ ΜΕΡΟΥΣ ΣΤΟΙΧΕΙΑ ΣΧΕ ΙΑΣΜΟΥ
ΜΕΡΟΣ Α: ΣΗΜΕΙΑ ΕΙΣΟ ΟΥ ΑΓΙΑ ΤΡΙΑ Α U-3020 ΘΕΡΜΟΚΡΑΣΙΑ ΣΧΕ ΙΑΣΜΟΥ -15 C / +50 C 38,4 barg / 66,4 barg ΕΛΑΧΙΣΤΗ / ΜΕΓΙΣΤΗ ΠΙΕΣΗ ΕΞΟ ΟΥ 37,9 barg / 66,4 barg ΕΛΑΧΙΣΤΗ / ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑ ΕΙΣΟ ΟΥ + 3 C
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
STEAM TABLES. Mollier Diagram
STEAM TABLES and Mollier Diagram (S.I. Units) dharm \M-therm\C-steam.pm5 CONTENTS Table No. Page No. 1. Saturated Water and Steam (Temperature) Tables I (ii) 2. Saturated Water and Steam (Pressure) Tables
COPELAND SCROLL AIR COOLED CONDENSING UNITS
R404A Refrigerant Scroll R507A Refrigerant R134A Refrigerant STANDARD UNIT WITH: Copeland ZB Scroll Compressors for medium temp applications on R404A/R507A/R134A Copeland ZB & ZF Scroll Compressors for
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN
Halogen- free low smoke fire resistant security power cables with copper concentric conductor CONSTRUCTION Conductors: bare copper conductor, circular solid class 1 (RE) or stranded circular or circular
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Ένταξη Υπαρχόντων Πλοίων στο Νηογνώμονα
Ένταξη Υπαρχόντων Πλοίων στο Για Τεχνικές Υπηρεσίες Παγκόσμιας Κλάσης Ένας παγκόσµιος ηγέτης στην ταξινόµηση πλοίων Καταχώρηση Υπαρχόντων Πλοίων στο Καταχώρηση Υπαρχόντων Πλοίων στο Αλλαγή (TOC) Η Αλλαγή
65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE
F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between
APPENDIX A. Summary of the English Engineering (EE) System of Units
Appendixes A. Summary of the English Engineering (EE) System of Units B. Summary of the International System (SI) of Units C. Friction-Factor Chart D. Oblique-Shock Charts (γ = 1.4) (Two-Dimensional) E.
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
RECIPROCATING COMPRESSOR CALCULATION SHEET
Gas properties, flowrate and conditions 1 Gas name Air RECIPRCATING CMPRESSR CALCULATIN SHEET WITH INTERCLER ( Sheet : 1. f 4.) Item or symbol Quantity Unit Item or symbol Quantity Unit 2 Suction pressure,
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
!"#$!"#$%!"#$ Application Note. Pharmaceutical. Udo Huber. ChemStore C/S! ChemStation Plus!"#$ LC LC/MSD CE GC A/D!"#$%&'()*+,!"#$%!"#$!
!"#$!"#$%!"#$ Application Note Pharmaceutical Udo Huber ChemStore C/S! ChemStation Plus!"#$ LCLC/MSDCEGC A/D!"#$%&'()*+,!"#$%!"#$!"#$% ChemStation Plus!"#$%!"#$%&'()*+,-!"#$%&!"#$%&'()!"#$% ChemStation
, / 230 4,6 / 2, , / 230 5,4 / 2,7
Einstufige Kompressoren mit Einphasen-Wechselstrom Motor; Volumenstrom bis zu 335 m 3 /h Single stage compressors with single phase AC motor; volume flow up to 335 m 3 /h Bestell-Nr. Motor (IP55, Wärmeklasse
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Project: Brimsmore, Ye... Job no: C08127 Designed By kristian Checked By Network W.12.5. Network Design Table for OUTFALL B.SWS
Page 9 Network Design Table for OUTFALL B.SWS Length Fall Slope (1:X) Area (ha) T.E. (mins) DWF k (mm) HYD SECT DIA (mm) 21.004 38.358 0.192 199.8 0.389 0.00 0.0 0.600 o 900 21.005 24.228 0.121 200.2 0.051
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Technical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
Series of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. φ δ δ φ φφ φ 86 δ φ δ An explanation of the taping dimensions can be found
15W DIN Rail Type DC-DC Converter. DDR-15 series. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Vortex Insertion Flow Meter
Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 180 degrees out of phase to each other, resulting
MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
ΕΦΑΡΜΟΓΗ ΚΑΝΟΝΙΣΜΩΝ ΝΗΟΓΝΩΜΟΝΩΝ
ΕΦΑΡΜΟΓΗ ΚΑΝΟΝΙΣΜΩΝ ΝΗΟΓΝΩΜΟΝΩΝ Ενότητα 01: Νηογμώμονες Α. Θεοδουλίδης Ιστορικά στοιχεία Το 1691 στο Λονδίνο ο Edward Lloyd ιδρύει ένα καφενείοτο οποίο σιγά-σιγά αρχίζει και γίνεται κέντρο συνευρέσεων
Engineer Reference 1 / / A 35 7/16 X 7 7/8 X 23 5/8 31 1/8 X 21 7/8 X 11 1/4 14 T T 75 R410A oz/ft over 50' 265 / 318 / 388
Slim Duct, single zone split system SUBMITTAL EH035CAV / UH035CAV Specifications Nominal Capacity Cooling/Heating (Btu/h) 12,000 / 13,600 Cooling (Btu/h) 3,300-14,300 Capacity Range Heating (Btu/h) 3,100-18,000
ΓΙΑ ΤΗΝ ΑΝΑΘΕΣΗ ΤΗΣ ΠΡΟΜΗΘΕΙΑΣ: «Προμήθεια Αναλωσίμων»
ΠΡΟΣΚΛΗΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ KAI ΚΑΤΑΘΕΣΗΣ ΠΡΟΣΦΟΡΩΝ ΕΘΝΙΚΟ ΚΕΝΤΡΟ ΕΡΕΥΝΑΣ ΚΑΙ ΤΕΧΝΟΛΟΓΙΚΗΣ ΑΝΑΠΤΥΞΗΣ (Ε.Κ.Ε.Τ.Α.)/ ΙΝΣΤΙΤΟΥΤΟ ΧΗΜΙΚΩΝ ΔΙΕΡΓΑΣΙΩΝ ΚΑΙ ΕΝΕΡΓΕΙΑΚΩΝ ΠΟΡΩΝ (ΙΔΕΠ) 6 ο χλμ. Χαριλάου Θέρμης 57001
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
TRC ELECTRONICS, INC LED Driver Constant Voltage 45W MEAN WELL IDLV-45 Series
LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series ~ A File Name:IDLV5SPEC 0707 TRC ELECTRONICS, INC..888.6.95 LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series TRC ELECTRONICS, INC. SPECIFICATION
RANGE OF APPLICATION HYDRO DL. ver sion 1.1 / web:
RANGE OF APPLICATION HYDRO DL ver sion 1.1 / 26-04-2012 Factory Head Office Polykastro Industrial Park 61200 Polykastro, Greece Tel.: +30 23430 20140, 20150 Fax: +30 23430 23701 Athens Office-Showroom
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΥΠΟΥΡΓΕΙΟ ΑΝΑΠΤΥΞΗΣ & ΑΝΤΑΓΩΝΙΣΤΙΚΟΤΗΤΑΣ
Τμ. Χημ. Αναλύσεων & Οργανολ. Δοκιμών Αριθμός πρωτοκόλλου: 65549/447 Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 ΠΡΟΣ: Ν. ΠΟΤΙΔΑΙΑ ΧΑΛΚΙΔΙΚΗ,
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
IDPV-25 series. 25W PWM Output LED Driver. File Name:IDPV-25-SPEC S&E
5W PWM Output LED Driver IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 5W PWM Output LED Driver IDPV5 series SPECIFICATION MODEL IDPV5 IDPV5 4 IDPV5 6 IDPV5 48 IDPV5 60 DC VOLTAGE V 4V 6V 48V 60V CONSTANT
Daewoo Technopark A-403, Dodang-dong, Wonmi-gu, Bucheon-city, Gyeonggido, Korea LM-80 Test Report
LM-80 Test Report Approved Method: Measuring Lumen Maintenance of LED Light Sources Project Number: KILT1212-U00216 Date: September 17 th, 2013 Requested by: Dongbu LED Co., Ltd 90-1, Bongmyeong-Ri, Namsa-Myeon,
u-pvc Pipes, Ball Valves & Pressure Fittings Σωλήνες, Βάνες & Εξαρτήματα Πίεσης
u-pvc Pipes, Ball Valves & Pressure Fittings Σωλήνες, Βάνες & Εξαρτήματα Πίεσης Pipes Ball Valves - Valves Solvent Cement Jointed Fittings BSP Threaded Fittings Adaptor Fittings Σωλήνες Βάνες - Βαλβίδες
Contents HYDRAULIC LIFTS TYPE: HYDRO DL. Version: 1.0 Page: 2/15 Date: 18.09.09
Page: 2/15 Contents 3D LAYOUT... 3 LAYOUT ARRANGEMENT: ACTING 1:2... 4 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 4 Technical specification... 4 Plan view... 5 SINGLE ENTRANCE GUIDE RAILS AT REAR... 6
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
ALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Contents MRL TRACTION LIFTS TYPE: BASIC 2 MRL. Version: 1.3 Page: 2/10 Date:4-Jan-10
Page: 2/10 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 LAYOUT ARRANGEMENT:... 5 SINGLE ENTRANCE GUIDE RAILS AT LEFT... 5 Plan view... 5 ADJACENT ENTRANCES GUIDE RAILS AT LEFT... 6 Plan view...
ΜΕΓΙΣΤΟΠΟΙΗΣΗ ΕΝΕΡΓΕΙΑΚΗΣ ΑΠΟΔΟΤΙΚΟΤΗΤΑΣ
ΔΙΑΔΙΚΑΣΙΑ ΠΑΡΑΛΑΒΗΣ ΔΙΚΤΥΩΝ ΑΕΡΑ / ΝΕΡΟΥ & ΜΕΓΙΣΤΟΠΟΙΗΣΗ ΕΝΕΡΓΕΙΑΚΗΣ ΑΠΟΔΟΤΙΚΟΤΗΤΑΣ Παρασκευόπουλος Βασίλης Μηχανολόγος Μηχανικός ΕΜΠ, MSc,, P.E., Τεχνικός Σύμβουλος Commissioning WWW.VPC.GR ΚΑΝΟΝΙΣΜΟΙ
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
LGU. Low Profile. Smaller. LGW High Ripple Current LGN. Performance Characteristics. Measurement frequency : 120Hz Rated voltage (V)
Snap-in Terminal Type, 105 C Standard Withstanding hours application of rated ripple current at 105 C. Compliant to the RoHS directive (2011/65/EU). LGW High Ripple Smaller Low Profile Specifications LGN
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
Contents MRL HYDRAULIC LIFTS TYPE: HYDRO TOTAL MRL. Version: 3.0 Page: 2/18 Date:
Page: 2/18 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING 2:1... 4 LAYOUT ARRANGEMENT: ACTING 2:1... 5 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 5 Plan view... 5 SINGLE ENTRANCE GUIDE RAILS
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
65W PWM Output LED Driver. IDPV-65 series. File Name:IDPV-65-SPEC
IDPV65 series ~ A File Name:IDPV65SPEC 07060 IDPV65 series SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note.
High hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)
VLR/VLRI/VLR VLR Vertical multistage centrifugal pumps The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming. High hydraulic efficiency
20/01/ of 8 TOW SSD v3. C 2.78AC Σ Cumul. A*C. Tc 1 =A14+1 =B14+1 =C14+1 =D14+1 =E14+1 =F14+1 =G14+1 =H14+1 =I14+1 =J14+1 =K14+1
20/01/2014 1 of 8 TOW SSD v3 Location Project a =IF(Design_Storm>0,VL b =IF(Design_Storm>0,VL c =IF(Design_Storm>0,VL Designed By Checked By Date Date Comment Min Tc 15 LOCATION From To MH or CBMH STA.
Α ιθ EL. 3. Κα ασ ασ ής: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, Waldachtal, α ία. Tumlingen,
Η ΩΣΗ ΠΙ ΟΣ Ω Α ιθ. 0020 EL 1. Μο α ι ός ω ι ός α ο οί σ ς ο ύ ο ο οϊό ος: fischer η ώ α ο ώ α ύ ιο FH II, FH II-I 2. Π οβ ό - ς χ ήσ - ις : Π οϊό Α ύ ιο ιασ ο ής χό ς α ό ο ι έ η/ ς ήση/ ις ω σ έ ω σ
IDPV-45 series. 45W PWM Output LED Driver. File Name:IDPV-45-SPEC S&E
IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 IDPV5 series SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 e-mail: chemlab@efpolis.
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 ΠΡΟΣ: ΜΑΡΜΑΡΟ ΚΕΡΚΥΡΑΣ ΤΚ 49100 Τηλ: 2661051078 ΘΕΜΑ: Αποστολή έκθεσης δοκιμών Σας αποστέλλουμε
Vertical multistage centrifugal pumps in AISI 316 stainless steel
VLRI/X Vertical multistage centrifugal pumps in AISI 316 stainless steel The VLRI/X are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming.
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). S Smaller G Specifications Item Category Temperature
MRL HYDRAULIC LIFTS TYPE:
DRO MRL MRL HYDRAULIC LIFTS TYPE: HYD Version: 1.1 Date: 26/04/2012 Page: 1/17 Range of Application 1 Version: 1.1 Date: 26/04/2012 Page: 2/17 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING
Country of Origin. Japan Malaysia China
Radial Lead Type Series: FC Type :A n Features Endurance : 5 C 00 h to 5000 h Low impedance Country of Origin Japan Malaysia China n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide (MOV) Data Sheet Feature Wide operating voltage range from 82V to 1100V Operating Temperature: -40 ~ +125 Storage Temperature: 15 ~35 Applications The over-voltage protection for transistors,
Prepolarized Microphones-Free Field
Prepolarized Microphones-Free Field MP0 / MP3 / MP / MP / MP / MP / MP8 MP0 MP3 MP MP MP MP MP8 Standards (IEC7) I I I.3 ~ 0k 3 ~ 0k 0 ~.k 0 ~.k 0 ~ 70k 0 ~ k 0 ~ k Open-circuit Sensitivity (mv/pa) (±db)
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 e-mail: chemlab@efpolis.
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 ΠΡΟΣ: ΧΡΗΣΤΟΣ Κ ΜΕΛΛΟΣ- ΘΕΡΜΗΣΙΑ ΕΡΜΙΟΝΙΔΟΣ Τηλ: 2103645889,6977715323 Φαξ: 2103626885 ΘΕΜΑ: Αποστολή
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 e-mail: chemlab@efpolis.
Διεύθυνση: Πλ. Κάνιγγος, 10181 Αθήνα Πληροφορίες: Α. Γαλή Τηλέφωνο: 0030 210 3829166 Φαξ: 0030 210 3829166 ΠΡΟΣ: "OLIVE VISION" ΜΠΑΛΑΦΑΣ Κ.-ΔΗΜΑΡΑΚΗΣ ΜΑΡΑΘΩΝΟΔΡΟΜΟΥ 41-45 Τηλ: 2117002719 Φαξ: 2754021018
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
LOWARA e-nsce, e-nscs, e-nscf
End suction pumps LOWARA e-nsce, e-nscs, e-nscf Pumps made of cast iron e-nscs e-nscf e-nsce Description Specifications e-nsc normal priming pumps are designed for applications in the industrial and agricultural