U8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB85
|
|
- Βαρνάβας Λύτρας
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Analog Output Position sensor with measuring tape Measurement range up to 6000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage V Voltage V Current ma, 3 wire <0.05 mm Linearity ±0.10 % f. s.; optional ±0.05 % Sensing device Magnetic absolute encoder Material Plastic and stainless steel; Tape: stainless steel, 10 mm wide, 0.08 mm thick class IP67/IP69K (with mating connector) Connector M12, 5 pin Shock EN :1993, 100 g/11 ms, 100 shocks Vibration EN :1995, 20 g 10 Hz-2 khz, 10 cycles, temperature Refer to output specification Order code Model name Measurement range (in mm) 5000 / 6000 Output U2 = V signal conditioner U8 = V signal conditioner I1 = ma signal conditioner Signal characteristics A = increasing (eg ma) D = decreasing (eg ma) Linearity L10 = ±0.10 % (standard) L05 = ±0.05 % (optional) M12R5 = Connector M12, 5 pin Dust wiper Order code connector cable see page 13 Order example: I1 - A - L10 - M12R5 - DB--E
2 Analog Output, programmable Position sensor with measuring tape Measurement range up to 6000 mm class IP67/IP69K Stainless steel measuring tape Analog output, programmable Specifications Outputs Resolution U2/PMU U8/PMU I1/PMU Voltage V, programmable Voltage V, programmable Current ma, 3 wire, programmable <0.05 mm Linearity ±0.10 % f. s.; optional ±0.05 % Sensing device Magnetic absolute encoder Material Plastic and stainless steel; Tape: stainless steel, 10 mm wide, 0.08 mm thick class IP67/IP69K (with mating connector) Connector M12, 5 pin Shock EN :1993, 100 g/11 ms, 100 shocks Vibration EN :1995, 20 g 10 Hz-2 khz, 10 cycles, temperature Refer to output specification Order code Model name Measurement range (in mm) 5000 / 6000 Output U2/PMU = V signal conditioner, programmable U8/PMU = V signal conditioner, programmable I1/PMU = ma signal conditioner, programmable Signal characteristics A = increasing (eg ma) D = decreasing (eg ma) Linearity L10 = ±0.10 % (standard) L05 = ±0.05 % (optional) M12R5 = Connector M12, 5 pin Dust wiper Order code connector cable see page 14 Order example: U2/PMU - A - L10 - M12R5 - DB--E
3 Analog Output, redundant Position sensor with measuring tape Measurement range up to 6000 mm class IP67/IP69K Stainless steel measuring tape Analog output, redundant Specifications Outputs Resolution U2R U8R I1R Voltage V, redundant Voltage V, redundant Current ma, 3 wire, redundant <0.05 mm Linearity ±0.10 % f. s.; optional ±0.05 % Sensing device Magnetic absolute encoder Material Plastic and stainless steel; Tape: stainless steel, 10 mm wide, 0.08 mm thick class IP67/IP69K (with mating connector) Connector M12, 8 pin Shock EN :1993, 100 g/11 ms, 100 shocks Vibration EN :1995, 20 g 10 Hz-2 khz, 10 cycles, temperature Refer to output specification Order code Model name Measurement range (in mm) 5000 / 6000 Output U2R = V signal conditioner, redundant U8R = V signal conditioner, redundant I1R = ma signal conditioner, redundant Signal characteristics A/A = Output 1 increasing, output 2 increasing A/D = Output 1 increasing, output 2 decreasing D/D = Output 1 decreasing, output 2 decreasing Linearity L10 = ±0.10 % (standard) L05 = ±0.05 % (optional) M12R8 = Connector M12, 8 pin Dust wiper Order code connector cable see page 15 Order example: I1R - A/D - L10 - M12R8 - DB--E
4 Digital output SSI Position sensor with measuring tape Measurement range up to 6000 mm class IP67/IP69K Stainless steel measuring tape Digital output SSI Specifications Output Synchronous serial interface (SSI) Resolution 0.05 mm Linearity ±0.10 % f.s; optional ±0.05 % Sensing device Magnetic absolute encoder Material Plastic and stainless steel; Tape: stainless steel, 10 mm wide, 0.08 mm thick class IP67/IP69K (with mating connector) Connector M12, 8 pin Shock EN :1993, 100 g/11 ms, 100 shocks Vibration EN :1995, 20 g 10 Hz-2 khz, 10 cycles, temperature Refer to output specification Order code Model name Measurement range (in mm) 6000 Resolution (in µm) 50 (other resolutions on demand) Output MSSI = SSI synchronous serial interface Linearity L10 = ±0.10% L05 = ±0.05% (optional) M12R8 = Connector M12, 8 pin Dust wiper Order code connector cable see page 15 Order example: MSSI - L10 - M12R8 - DB--E
5 Digital output CANopen Position sensor with measuring tape Measurement range up to 6000 mm class IP67/IP69K Stainless steel measuring tape Digital output CANopen or CAN SAE J1939 Optional redundant CAN Bus (on demand) Specifications Output CANopen or CAN SAE J1939 Resolution setting via CAN Bus Linearity ±0.10 % f.s.; optional ±0.05 % Sensing device Magnetic absolute encoder Material Plastic and stainless steel; Tape: stainless steel, 10 mm wide, 0.08 mm thick class IP67/IP69K (with mating connector) Connector M12, 5 pin Shock EN :1993, 100 g/11 ms, 100 shocks Vibration EN :1995, 20 g 10 Hz-2 khz, 10 cycles, temperature Refer to output specification Bestellcode Model name Measurement range (in mm) 6000 Output MCANOP = CANopen MCANJ1939 = CAN SAE J1939 Linearity L10 = 0.10% L05 = 0.05% (optional) M12/CAN = Connector M12, 5 pin Dust wiper Order code connector cable see page 16 Order example: MCANOP - L10 - M12/CAN - DB--E
6 Analog or digital output Dimensions M12-Stecker / M12-connector 6,5 [.256] 27 [1.063] 17 [.669] 6,5 [.256] 68 [2.677] 83 [3.268] 91,5 [3.602] 42,5 [1.673] 85 [3.346] 106 [4.173] 86 [3.386] 124 [4.882] F ( 1 : 1 ) 106 [4.173] 50,7 1 [ ] 10 [.394] 5 [.197] 2,1 [.083] 25 [.984] 15 [.591] 6,5 [.256] 4,5 [.177] 12,5 [.492] 56 [2.205] F 28 [1.102] 43 [1.693] 13 [.512] 10 [.394] 13,7 [.539] 85 [3.346] 61,2 1 [ ] Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. 45 DB--E
7 U2, U8 and I1 Analog output U2 Voltage output V U8 Voltage output V I1 Current output ma, 3 wire typ. 20 ma at 24 V DC typ. 20 ma at 24 V DC max. 60 ma Output voltage 0, V DC 2 ma max. typ. 17 ma at 24 V DC typ. 32mA at 12 V DC max. 60 ma Output voltage 0,5... 4,5 V DC 2 ma max. typ. 36 ma at 24 V DC typ. 70 ma at 12 V DC max. 100 ma Load R L 500 Ω max ma Output signals Excitation + U2 U8 I1 Signal + GND Signal wiring/ connection Output signal Connector pin Cable wire color Excitation + 1 brown Signal 2 white GND 3 blue Do not connect! 4 black Do not connect! 5 (grey) View to sensor connector DB--E
8 ) U2/PMU, U8/PMU and I1/PMU Analog output, programmable U2/PMU Voltage output V U8/PMU Voltage output V I1/PMU Current output ma, 3 wire typ. 20 ma at 24 V DC, typ. 38 ma at 12 V DC max. 60 ma Output voltage 0, V DC 2 ma max. typ. 17 ma at 24 V DC, typ. 32 ma at 12 V DC max. 60 ma Output voltage 0,5... 4,5 V DC 2 ma max. typ. 36 ma at 24 V DC, typ. 70 ma at 12 V DC max. 100 ma Load R L 500 Ω max ma Output signals Excitation + U2/PMU U8/PMU I1/PMU Signal + GND SPAN/ZERO Signal wiring/ connection DB--E Signal Connector pin Cable wire color Excitation + 1 brown Signal 2 white GND 3 blue Do not connect! 4 black SPAN/ZERO 5 grey View to sensor connector Option -PMU Programming of the start and end value by the customer Teach-In of start and end value for the options U2/PMU, I1/PMU, U8/PMU is provided by a binary signal SPAN/ZERO. At the start position connect signal SPAN/ZERO for a period of 2 3 seconds to GND via push button. At the end position connect signal SPAN/ZERO for a period of 5 6 seconds to GND via a push button. The teached positions will be stored non-volatile. To reset the sensor to factory default signal ZERO/END must be connected to ground while powering up the sensor for 2 3 seconds.
9 U2R, U8R and I1R Analog output, redundant U2R Voltage output V U8R Voltage output ,5 V I1R Current output ma, 3 wire Output signals typ. 22 ma at 24 V DC typ. 43mA at 12 V DC max. 60 ma per channel Output voltage 0, V DC 2 ma max. typ. 20mA at 24 V DC typ. 38mA at 12 V DC max. 60 ma per channel Output voltage 0,5... 4,5 V DC 2 ma max. typ. 39 ma at 24 V DC typ. 76 ma at 12 V DC max. 100 ma per channel Load R L 500 Ω max ma U2R U8R I1R Excitation + Signal + GND (SPAN/ZERO) Excitation + Signal + GND (SPAN/ZERO) Signal wiring/ connection DB--E Channel Signal Connector Pin Cable wire color 1 Excitation + 1 white 1 Signal 2 brown 1 GND 3 green 1 SPAN/ZERO (Option PMU) 4 yellow 2 Excitation + 5 grey 2 Signal 6 pink 2 GND 7 blue 2 SPAN/ZERO (Option PMU) 8 red View to sensor connector
10 MSSI Digital output SSI MSSI Synchronous serial SSI Interface EIA RS V DC typ. 19 ma at 24 V DC typ. 35 ma at 12 V DC max. 80 ma Clock frequency 100 khz khz Code Gray-Code, continuous progression Delay between pulse trains 20 µs min. ±50 x 10-6 / C f.s. (typical) Short circuit Data format (train of 26 pulses) Recommended processing circuit DATA DATA CLOCK CLOCK Transmission rate Signal wiring/ Cable length Baud rate 50 m khz 100 m khz Signal Connector Pin Cable wire color Excitation + 1 white Excitation GND 2 brown CLOCK 3 green CLOCK 4 yellow DATA 5 grey DATA 6 pink 7 blu 8 red Note: Extension of the cable length will reduce the maximum transmission rate. View to sensor connector DB--E
11 MCANOP Digital output CANopen MCANOP CANopen Communication profile CANopen CiA 301 V 4.02, Slave Encoder profile Encoder CiA 406 V 3.2 Error Control Node Guarding, Heartbeat, Emergency Message Node ID Adjustable via LSS; default: 127 PDO 3 TxPDO, 0 RxPDO, no linking, static mapping PDO Modes Event-/Time triggered, Remote-request, Sync cyclic/acyclic SDO 1 server, 0 client CAM 2 cams Certified Yes Transmission rates 50 kbit to 1 Mbit, adjustable via LSS; default: 125 kbit Bus connection M12 connector, 5 pins Integrated bus terminating resistor 120Ω adjustable by the customer Bus, galvanic isolated No Specifications Repeatability V DC typ. 20 ma at 24 V DC typ. 40 ma at 12 V DC max. 80 ma 1 khz (asynchronous) ±50 x 10-6 / C f.s. 1 LSB Dielectric strength 1 kv (V AC, 50 Hz, 1 min.) EN :2006 Signal wiring / connection Signal Connector pin Shield 1 Excitation + 2 GND 3 CAN-H 4 CAN-L 5 View to sensor connector DB--E
12 MCANJ1939 Digital output CAN SAE J1939 MCANJ1939 CAN SAE J1939 CAN specification Transceiver Communication profile Baud rate Integrated bus terminating resistor Address ISO 11898, Basic and Full CAN 2.0 B 24V-compliant, not isolated SAE J kbit/s 120Ω adjustable by the customer Default 247d, configurable NAME Fields Arbitrary address capable 1 Yes Industry group 0 Global Vehicle system 7Fh (127d) Non specific Vehicle system instance 0 Function FFh (255d) Non specific Function instance 0 ECU instance 0 Manufacturer 145h (325d) Manufacturer ID Identity number 0nnn Serial number 21 bit Parameter Group Numbers (PGN) Configuration data PGN EF00h Proprietary-A (PDU1 peer-to-peer) Process data PGN FFnnh Proprietary-B (PDU2 broadcast); nn Group Extension (PS) configurable Specifications Repeatability V DC typ. 20 ma at 24 V DC typ. 40 ma at 12 V DC max. 80 ma 1 khz (asynchronous) ±50 x 10-6 / C f.s. 1 LSB Operating temperature C Dielectric strength 1 kv (V AC, 50 Hz, 1 min.) EN :2006 Signal wiring / connection Signal name Connector pin no. Shield 1 Excitation + 2 GND 3 CAN-H 4 CAN-L 5 View to sensor connector DB--E
13 Accessories Connectors Connector cable 4 pin M12 Suitable for 5-pin sensor connectors The 4-lead shielded cable is supplied with a mating 4-pin 90 M12 connector at one end and 4 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.34 mm 2. KAB - XM - M12/4F/W - LITZE IP69K: KAB - XM - M12/4F/W/69K - LITZE Length in m Connector cable 4 pin M12 Suitable for 5-pin sensor connectors The 4-lead shielded cable is supplied with a mating 4-pin M12 connector at one end and 4 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.34 mm 2. IP69K: KAB - XM - M12/4F/G - LITZE KAB - XM - M12/4F/G/69K - LITZE Length in m Signal wiring M12, 4 pin Connector pin / cable color brown white blue black DB--E
14 Accessories Connectors Connector cable 5 pin M12 The 5-lead shielded cable is supplied with a mating 5-pin 90 M12 connector at one end and 5 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.34 mm 2. KAB - XM - M12/5F/W - LITZE IP69K: KAB - XM - M12/5F/W/69K - LITZE Length in m Connector cable 5 pin M12 The 5-lead shielded cable is supplied with a mating 5-pin M12 connector at one end and 5 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.34 mm 2. IP69K: KAB - XM - M12/5F/G - LITZE KAB - XM - M12/5F/G/69K - LITZE Length in m Signal wiring M12, 5 pin Connector pin / cable color brown white blue black grey DB--E
15 Accessories Connectors Connector cable 8 pin M12 The 8-lead shielded cable is supplied with a mating 8-pin 90 M12 connector at one end and 8 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.25 mm². IP69K: KAB - XM - M12/8F/W - LITZE KAB - XM - M12/8F/W/69K - LITZE Length in m Connector cable 8 pin M12 The 8-lead shielded cable is supplied with a mating 8-pin M12 connector at one end and 8 wires at the other end. Available lengths are 2, 5 and 10 m. Wire: cross sectional area 0.25 mm². IP69K: KAB - XM - M12/8F/G - LITZE KAB - XM - M12/8F/G/69K - LITZE Length in m Signal wiring M12, 8 pin Connector pin / cable color white brown green yellow grey pink blue red DB--E
16 Accessories Connectors Connector/bus cable 5 pin M12 CAN bus The 5-lead shielded cable is supplied with a female 5-pin M12 connector at one end and a male 5-pin M12 connector at the other end. Available lengths are 0.3, 2, 5 and 10 m. KAB - XM - M12/5F/G - M12/5M/G - CAN IP69K: KAB - XM - M12/5F/G/69K - M12/5M/G/69K - CAN Length in m T-piece for bus cable 5 pin M12 CAN bus KAB - TCONN - M12/5M - 2M12/5F - CAN Terminating resistance 5 pin M12 CAN bus KAB - RTERM - M12/5M/G - CAN DB--E
17 Accessories Tape pulley Tape pulley WBR1 WBR1 40 [1.575] 55 [2.165] 35 [1.378] 5 [0.197] 40,4 [1.591] 60 [2.362] 7,5 [0.295] 2x 5,5 20 [0.795] 7,5 [0.295] 28 [1.102] 45 [1.772] Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. DB--E
Stainless steel measuring tape Analog output U8 I1. ±0.10 % f. s. (standard); ±0.05 % (optional) Protection class IP68/IP69K
Analog Output Position sensor with measuring tape Measurement range up to 10000 mm class IP68/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution Sensing device Material
Διαβάστε περισσότεραU8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB21
Analog Output Position sensor with measuring tape Measurement range up to 20,000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...
Διαβάστε περισσότεραPOSICHRON position sensor in a stainless steel pressure tube. Protection class IP68/IP69K
Round Profile Housing with Analog position sensor in a stainless steel pressure tube Protection class IP68/IP69K Underwater applications, permanent pressure-proof up to 15 bar Measurement range 0... 100
Διαβάστε περισσότεραRanges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm. 4 pin socket M8 / cable 2 m
Flat Profile Housing with Analog position sensor Only 12 mm height and 43 mm width Protection class up to IP67/IP69K Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Ultra flat
Διαβάστε περισσότεραPOSICHRON position sensor in square profile
Square Profile Housing with Analog Output position sensor in square profile Protection class up to IP67/IP69K Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Easy installation
Διαβάστε περισσότεραPOSICHRON position sensor in round profile
Round Profile Housing with Analog Output position sensor in round profile Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Contactless Absolutely wearless
Διαβάστε περισσότεραDC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
Διαβάστε περισσότεραPS500 Rotatable Programmable Pressure Sensors
PS500 Rotatable Programmable Pressure Sensors Great for Hydraulic & Pneumatic Application IP67 Dual Switch points Part Number Operating Range Overpressure Rating Set Reset Fluid Connection Drawing # Bar
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραDC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
Διαβάστε περισσότεραGearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραSPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραIndustrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραSiemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
Synchronous motors Siemens 2009 FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height n red S P red ΔT=00 K rpm kw (P) Red power Stic torque M 0 ΔT=00 K Red torque ) M red ΔT=00
Διαβάστε περισσότερα! " # $ &,-" " (.* & -" " ( /* 0 (1 1* 0 - (* 0 #! - (#* 2 3( 4* 2 (* 2 5!! 3 ( * (7 4* 2 #8 (# * 9 : (* 9
"# " # $ "%%" & '" (' )' * & + (' )' * &,-" " (.* & -" " ( /* 0 (1 1* 0 - (* 0 # - (#* 2 # - (#* 2 3( 4* 2 (* 2 5 3 ( * 2 6 3 (7 4* 2 #8 (# * 9 : (* 9 #" " 5,1 < = " = #+ +# 9 ' :> # &? + # & ISD i " @
Διαβάστε περισσότερα65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραDistributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. Single-Chip Voice Record/Playback Devices 60-, 75-, 90-, and 20-Second Durations
Διαβάστε περισσότεραTechnical Specifications
FLX-8X8A Chassis Technical Specifications Modular Input Cards... FLX-BI4, FLX-DI4, FLX-HI4, FLX-RI4 Analog Audio... Balanced or Unbalanced Stereo Audio (20 Hz to 20 khz) Supported Outputs Modular Output
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότερα38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Διαβάστε περισσότεραQUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότερα65W PWM Output LED Driver. IDPV-65 series. File Name:IDPV-65-SPEC
IDPV65 series ~ A File Name:IDPV65SPEC 07060 IDPV65 series SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note.
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραOWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC
Single Output Moistureproof Adaptor OWA-60E series IP67 Ⅱ Ⅱ moistureproof I File Name:OWA-60E-SPEC 0-04- Single Output Moistureproof Adaptor OWA-60E series SPECIFICATION MODEL OWA-60E- OWA-60E- OWA-60E-0
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότερα60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC
AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series Ⅵ Ⅴ Ⅱ Ⅱ { ψ. ψ File Name:SGA60E-SPEC 2015-09-15 AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series SPECIFICATION ORDER NO. SGA60E05-P1J
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραReturn Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
Διαβάστε περισσότεραPhotomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραInstallation Instructions Electronic pressure sensor. PTD25-10-xxxxx PTD25-20-xxxxx
Installation Instructions Electronic pressure sensor PTD25-10-xxxxx PTD25-20-xxxxx 7048 / 00 07 / 2010 Contents Safety instructions... 2 Function and features... Installation... 4 Electrical connection...
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραIDPV-45 series. 45W PWM Output LED Driver. File Name:IDPV-45-SPEC S&E
IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 IDPV5 series SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραAccessories 2-WIRE PROGRAMMABLE TRANSMITTERS. 5331D Features: 5333D Features: 5334B Features: Typical Applications: Mounting and Installation:
2WIRE PROGRAMMABLE TRANSMITTERS 5331D Features: RTD, Thermocouple, Ohm, or mv input Extremely high measurement accuracy 1.5 kvac galvanic isolation 5333D Features: RTD or Ohm input High measurement accuracy
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότερα3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότεραHigh Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραDigital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραwith serial RS485/RS232 output RS485
with serial RS485/RS232 output RS485 2 Applications Měřící a záznamový systém MS v různých provedeních Building management 2 Industry Meteorology Pharmaceuticals and laboratories Technological processes
Διαβάστε περισσότεραTRC ELECTRONICS, INC LED Driver Constant Voltage 45W MEAN WELL IDLV-45 Series
LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series ~ A File Name:IDLV5SPEC 0707 TRC ELECTRONICS, INC..888.6.95 LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series TRC ELECTRONICS, INC. SPECIFICATION
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
Διαβάστε περισσότεραOverview: Relay Modules
20 Overview: Relay Modules 859 Series 857 Series 788 Series 858 Series 288 and 287 Series 286 Series 789 Series Relays with Changeover Contacts 1 changeover contact Item No. Page Item No. Page Item No.
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότερα1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραRating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition
MA MA Series Silicon planer e For stabilization of power supply ø.56. Unit : mm Features Color indication of VZ rank classification High reliability because of combination of a planer chip and glass seal
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 5 Part name Material Flammability FEATURES Cover Stainless steel (SUS 4) Slider Housing Moving ontat Fixed ontat pin Polyamido Polyphenylenesulphide Copper
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραSAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Διαβάστε περισσότεραELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραDEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραthe total number of electrons passing through the lamp.
1. A 12 V 36 W lamp is lit to normal brightness using a 12 V car battery of negligible internal resistance. The lamp is switched on for one hour (3600 s). For the time of 1 hour, calculate (i) the energy
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραMAX4147ESD PART 14 SO TOP VIEW. Maxim Integrated Products 1 MAX4147 EVALUATION KIT AVAILABLE ; Rev 1; 11/96 V CC V EE OUT+ IN+ R t SENSE IN-
-; Rev ; / EVALUATION KIT AVAILABLE µ µ PART ESD TEMP. RANGE - C to +5 C PPACKAGE SO TOP VIEW V EE V CC SENSE+ SENSE- R t R t R t R t MAX SENSE OUT SENSE+ SENSE- N.C. SHDN N.C. 3 5 R f R G R f 3 VDSL TRANSFORMER
Διαβάστε περισσότεραISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότεραIDPV-25 series. 25W PWM Output LED Driver. File Name:IDPV-25-SPEC S&E
5W PWM Output LED Driver IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 5W PWM Output LED Driver IDPV5 series SPECIFICATION MODEL IDPV5 IDPV5 4 IDPV5 6 IDPV5 48 IDPV5 60 DC VOLTAGE V 4V 6V 48V 60V CONSTANT
Διαβάστε περισσότερα