Project Pavillion Vert Discrict Heating Groupe Gambetta - Compte-R Le Grand Parc, Bondoufle, France PelleTech Idro 500 kw
PROJECT OVERVIEW 1 x PelleTech 500 kw Idro Pellet Version Supplying heat to 3 independent buildings and 30 apartments in total. A second natural gas boiler operates as a back up boiler Runs on pellet fuel Boiler, fuel feeing system and their eqipment are installed in one container providing to the private heating supplier a compact all-in one solution installation. District heating solution. The complete installation is located 1500 m from the apartments. OUTCOME Fuel Cost Savings of 60-70% CO2 Reduction of 95% Project Payback Period of 2-3 Years I would like to express my complete satisfaction with the product provided by Camino Design. The PelleTech 500kW Idro boiler fulfils Pavillions Vert requirements for heating. A reliable partner. Pavillion Vert apartments are for those who love a residence with sober and elegant architecture.
FEATURES High chromium cast steel moving grate burner, which allows the combustion of high humidity biomass fuel and long life operation of the boiler due to its increased heat resistance properties. The dual level air inlets for secondary combustion air, ensure even more controlled air flow in the exhaust fumes. In addition with the primary combustion air the 3-zone air supply ensures optimum combustion quality and great efficiency. $SJJWȩAutomatic ash extractionȩqwqrck @MRFȩDMPȩAMK@SQRGMLȩ?LBȩ FC?RȩCVAF?LECPȩAMKN?PRKCLRQ ȩ2fcȩ?qfȩgqȩbpgtclȩrfpmsefȩqcn?p?rcȩ?secpqȩglrmȩrumȩj?pecȩash containers. Heat exchanger with 4 vertical double routes with build in decelerators, for higher efficiency and the minimum possible exhaust fumes emission. The ideal combustion and thus the maximum efficiency is garanteed by several devices. The electronically controlled flue gas motor and vacuum sensor ensure in each case steady combustion conditions. The temperature sensor which is placed into the combustion chamber monitors the burning process and protects the chamber in case of overtemperature conditions. Last but not least, the lambda sensor make all the fine adjustments of fuel and combustion air in order to ensure the minimum use of fuel The safety temperature sensor, the overal protection through the advance controller and the back burning protection valve ensure maximum safety confitions during operation of the boiler. THE RESULT (Compared to heating oil. Source, Biomass Energy Centre) Biomass Fuel Cost Saving; 60-70% (Pellet fuel). CO2 Reduced; Up to 95% per annum. Financial Benefit; Fuel cost saving and a 4-5 year payback on the capital cost.
Background "GQRPGARȩFC?RGLEȩDMPȩ ȩglbcnclbclrȩ @SGJBGLEQȩ?LBȩ ȩ?n?prkclrqȩglȩrmr?j Reduction for both heating costs and CO2 emissions All in one/ portable solution for the private heat supplier. Project Summary A top-of-the-range, fully automated PelleTech 00kW Idro biomass boiler system, with automatic ignition. Boiler, fuel feeding system and tank installation into a 12 meter container. The pellet silo is filled directly through a Störz inlet. Electronic control panel, enabling the client to monitor boiler performance. Design of system compliant with the State requirements Complete Biomass Heating Package Camino Design supplied the PelleTech 500 kw Idro pellet boiler and its fuel feeding system installed into the 12ȩ m container. Compte-R made the connection of the complete heating system to the district heating circuit. The boiler and fuel store were installed in a purpose-built 12m container. Background According to the information used in this case study, the installation of the PelleTech 500 kw Idro Industrial biomass boiler was a very good investment, with a simple payback period of 2 to 3 years. The biomass boiler has a reasonable payback period. The cost of fossil fuels is the key driver in this analysis. The demand for biomass fuels has increased recently, resulting in an increase in fuel cost, a trend that is likely to continue. The cost of heating would be approximately as per the table below. PelleTech 500 Idro 430.000 Kcal/h Annual operating hours 2500 h Annual oil consumption (11,8 KWh/ kg) 125 tn / year 177.500* Annual almond shell consumption (4,7 ΚWh/kg) tn. ȧ *, ** Price for oil 1.42 Jȧand price for pellet fuel 0.2 IE Cost ( )
Total project price: 250.000 *. Payback Period: 2-3 years *Financial information not specific to this project figures are based on an average of several typical projects of this size. Key Facts Specifications Project Included PelleTech 500 kw Idro boiler system including and pellet fuel feeding system. Heat output at 500 kw. Fuel Consumption 295 tones of pellet per annum. (Based on 500kW boiler, in a similar application) Dimensions; 3.958 w x 2.414 h x 1.783 d (mm). Weight; 3200 Kg Fuel; Pellets O-Norm M7135, Pellets EN 14961 A1, Pellets DIN plus, Pellets DIN 51731. Fuel Cost Saving (Source; Biomass Energy Centre) Pellet fuel; 60-70% vs heating oil. CO2 Saving (Source; Biomass Energy Centre) Up to 95% vs heating oil. Boiler output; perfect modulation at up to 90% efficiency from 30%-100% of output. Boiler temperature; 60-80 C. Return flow temperature regulated to protect boiler. Water capacity; 1700 Litres. Operating pressure; Max 3 Bar. Power connection; 400V /16 Amp. CAMINODESIGN G. SAMOUKATSIDIS BROS HEAD QUARTERS - SHOWROOM BRANCH OFFICE 7th km Κozani-Ptolemaida Τel : 24610 45446 Fax: 24610 45360 5th km Ioannina-Athens Τel./ Fax: 26510 91413 www.caminodesign.gr info@caminodesign.gr www.caminodesign.gr info@caminodesign.gr