NTC Thermistors, Radial Leaded, Standard Precision FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio UL recognized, file E148885 Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 5 C. to 47K Tolerance on R 5 -value ± ; ± ; ± 5 % B 5/85 -value 88 to 457 K Tolerance on B 5/85 -value ±.5 to ± % Operating temperature range: At zero power dissipation; continuously - 4 to + 15 C At zero power dissipation; for short periods 15 Response time (in oil) 1. s Thermal time constant (for information only) 15 s Dissipation factor (for information only) 7 8.5 (for R 5 -value 68 ) mw/k Maximum power dissipation at 55 C 5 mw Climatic category (LCT/UCT/days) 4/15/56 - Weight. g APPLICATIONS Temperature measurement, sensing and control, temperature compensation in industrial and consumer electronics DESCRIPTION These thermistors have a negative temperature coefficient. The device consists of a chip with two solid copper tin plated leads. It is grey lacquered and color coded, but not insulated. PACKAGING The thermistors are packed in bulk or tape on reel; see code numbers and relevant packaging quantities. DESIGN-IN SUPPORT For complete Curve Computation, visit: www.vishay.com/resistors-non-linear/curve-computation-list/ MARKING The thermistors are marked with colored bands; see dimensions drawing and Electrical data and ordering information. MOUNTING By soldering in any position. Not intended for potted applications. ELECTRICAL DATA AND ORDERING INFORMATION R 5 B 5/85 -VALUE UL APPROVED SAP MATERIAL NUMBER OLD 1NC CODE COLOR CODE () (K) (± %) (Y/N)...B/T1/T () 81 64 /4/6... (1) I II III. 88 N 8*B *8 Orange Orange Gold 4.7 88 N 478*B *478 Yellow Violet Gold 6.8 88 N 688*B *688 Blue Grey Gold 1 99 N 19*B *19 Brown Black Black 15 41 N 159*B *159 Brown Green Black 16 N 9*B *9 Red Red Black 9 Y 9*B *9 Orange Orange Black 47 9 Y 479*B *479 Yellow Violet Black 68 9 Y 689*B *689 Blue Grey Black 1 56 1.5 Y 11*B *11 Brown Black Brown 15 56 1.5 Y 151*B *151 Brown Green Brown 56 1.5 Y 1*B *1 Red Red Brown 56 1.5 Y 1*B *1 Orange Orange Brown Revision: 4-Aug-1 1 Document Number: 949
ELECTRICAL DATA AND ORDERING INFORMATION R 5 B 5/85 -VALUE UL APPROVED SAP MATERIAL NUMBER OLD 1NC CODE COLOR CODE () (K) (± %) (Y/N)...B/T1/T () 81 64 /4/6... (1) I II III 47 56 1.5 Y 471*B *471 Yellow Violet Brown 68 56 1.5 Y 681*B *681 Blue Grey Brown 1 58.5 Y 1*B *1 Brown Black Red 15 58.5 Y 15*B *15 Brown Green Red 58.5 Y *B * Red Black Red 977.75 Y *B * Red Red Red 7 977.75 Y 7*B *7 Red violet Red 977.75 Y *B * Orange Orange Red 47 977.75 Y 47*B *47 Yellow Violet Red 5 977.75 Y 5*B *5 Green Black Red 68 977.75 Y 68*B *68 Blue Grey Red 1 977.75 Y 1*B *1 Brown Black Orange 1 74 Y 1*B *1 Brown Red Orange 15 74 Y 15*B *15 Brown Green Orange 74 Y *B * Red Red Orange 49 1.5 Y *B * Orange Orange Orange 47 49 1.5 Y 47*B *47 Yellow Violet Orange 5 419 1.5 Y 5*B *5 Green Black Orange 68 419 1.5 Y 68*B *68 Blue Grey Orange 1 419 1.5 Y 14*B *14 Brown Black Yellow 15 47.5 Y 154*B *154 Brown Green Yellow 47.5 Y 4*B *4 Red Red Yellow 457 1.5 N 4*B *4 Orange Orange Yellow 47 457 1.5 N 474*B *474 Yellow Violet Yellow Notes (1) Replace * in 1NC by for 5 %, 6 for %, 4 for % () Replace * in SAP by J for 5 %, H for %, G for % () For R 5 ± % band IV is red, ± % band IV is orange, ± 5 % band IV is gold DIMENSIONS in millimeters B IV III II I H T DERATING AND TEMPERATURE TOLERANCES P Power derating curve 1 H 1 L P d - 4 55 85 15 15 T amb Note Zero power is considered as measuring power max. 1 % of max. power. PHYSICAL DIMENSIONS FOR RELEVANT TYPE (all dimensions in millimeters) H 1 R 5 -VALUE B MAX. d MIN. MAX. H MAX. L P T MAX.. to 5..6 ±.6 1. 4. 6. 4 ± 1.5.54 4. to 47 k. ±.5.6 ±.6 1.. 6. 4 ± 1.5.54. Revision: 4-Aug-1 Document Number: 949
TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE. ΔT (K).5. 1 Curves valid for. kω to 1 kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = % Curve 4: ΔR 5/R 5 = 1 % (for NTCLEE series only) ΔT (K) 5 4 1 Curves valid for 1 kω to kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = % 1.5 1. 4.5 1-4 4 8 1 16 T - 4 4 8 1 16 T TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE 4. ΔT (K).5..5. 1 4 Curves valid for kω to 47 kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = % Curve 4: ΔR 5/R 5 = 1 % (for NTCLEE series only) 4. ΔT (K).5..5. 1 4 Curves valid for 68 kω to 1 kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = % Curve 4: ΔR 5/R 5 = 1 % (for NTCLEE series only) 1.5 1.5 1. 1..5.5-4 4 8 1 16 T - 4 4 8 1 16 T TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE ΔT (K) 6 5 4 1 Curves valid for 15 kω to kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = % 4. ΔT (K).5..5 1 Curves valid for kω to 47 kω Curve 1: ΔR 5/R 5 = 5 % Curve : ΔR 5/R 5 = % Curve : ΔR 5/R 5 = %. 1.5 1. 1.5-4 4 8 1 16 T - 4 4 8 1 16 T Revision: 4-Aug-1 Document Number: 949
VALUE AND TOLERANCE These thermistors have a narrow tolerance on the B-value, the result of which provides a very small tolerance on the nominal resistance value over a wide temperature range. For this reason the usual graphs of R = f(t) are replaced by Resistance Values at Intermediate Temperatures Tables, together with a formula to calculate the characteristics with a high precision. FORMULAE TO DETERMINE NOMINAL RESISTANCE VALUES The resistance values at intermediate temperatures, or the operating temperature values, can be calculated using the following interpolation laws (extended Steinhart and Hart ): R T R ref e A + B T + C T + = (1) = R A 1 + B 1 ln --------- + C 1 ln --------- R + D 1 ln --------- R 1 () T R R ref R ref D T R ref where: A, B, C, D, A 1, B 1, C 1 and D 1 are constant values depending on the material concerned; see table below. R ref. is the resistance value at a reference temperature (in this event 5 C, R ref. = R 5 ). T is the temperature in K. Formulae numbered and are interchangeable with an error of max..5 C in the range 5 C to 15 C and max..15 C in the range - 4 C to + 5 C. DETERMINATION OF THE RESISTANCE/TEMPERATURE DEVIATION FROM NOMINAL VALUE The total resistance deviation is obtained by combining the R 5 -tolerance and the resistance deviation due to B-tolerance. When: X = R 5 -tolerance Y = resistance deviation due to B-tolerance Z = complete resistance deviation, then: Z X 1 + --------- Y = 1 + --------- 1 1 % or Z X + Y 1 1 When: = temperature coefficient T = temperature deviation, then: Z T = ----------- The temperature tolerances are plotted in the graphs on the previous page. Example: at C, assume X = 5 %, Y =.89 % and = 5.8 %/K (see table ), then: 5 Z 1 + --------- 1.89 = + ---------- 1 1 1 1% = 1.5 1.89 1 1 % = 5.945 %( 5.9 %) Z 5.9 T = ----------- = ---------- = 1.167 C 1.17 C 5.8 A NTC with a R 5 -value of 1 k has a value of.56 k between - 1.17 C and + 1.17 C. PARAMETER FOR DETERMINING NOMINAL RESISTANCE VALUES NUMBER B 5/85 (K) NAME TOL. B A B (K) C (K ) 1 88 Mat O. with Bn = 88K - 9.94 51.74 998 -.7448E+7.5416E-.495E-4.95959E-6 4.6615E-7 99 Mat P. with Bn = 99K - 1.96 887.6 16 -.551E+7.5416E-.41556E-4 4.955455E-6 4.646E-7 41 Mat Q. with Bn = 41K - 11.14 658.7-1895 5.1665E+5.5416E-.499E-4.6884E-6 7.5455E-7 4 16 Mat R. with Bn = 16K - 1.449 47.74-4687.1968E+7.5416E-.488E-4.6581E-6 -.7156E-7 5 9 Mat S. with Bn = 9K - 1.6814 491.97-87 1.5964E+7.5416E-.9941E-4.151E-6-5.67E-9 6 58 (1) Mat I. with - 1.596 687.667-7617.1-5.9147E+6.5416E-.9967E-4 1.616E-6 7.19E-8.5 58 () Bn = 58K - 1.74 119.95-54699.478E+8.5416E-.998E-4.49414E-6-7.7169E-7 7 56 Mat H. with Bn = 56K 1.5-1.7 419.574-47158.4-1.19956E+7.5416E-.88419E-4 4.118E-6 1.78679E-7 8 74 Mat B. with Bn = 74K - 1.897 4557.75-9875 - 7.557E+6.5416E-.744E-4.666944E-6 1.7549E-7 9 977 Mat A. with Bn =977K.75-14.67 4791.84-1154 -.755E+6.5416E-.56985E-4.611E-6 6.891E-8 1 49 Mat C. with Bn = 49K 1.5-15.5 59.97-16451 - 5.41491E+6.5416E-.51917E-4.5199E-6 1.15179E-7 11 419 Mat D. with Bn = 419K 1.5-16.49 5459.9-191141 -.8E+6.5416E-.468E-4.4577E-6 1.44E-7 1 47 Mat E. with Bn = 47K.5-16.8717 5759.15-19467 - 6.869149E+6.5416E-.677E-4.58514E-6 1.5549E-7 1 457 Mat F. with Bn = 457K 1.5-17.649 6.76-157 - 7.1856E+6.5416E-.6497E-4.78184E-6 1.9768E-7 Notes (1) Temperature < 5 C () Temperature 5 C D (K ) A 1 B 1 (K -1 ) C 1 (K - ) D 1 (K - ) Revision: 4-Aug-1 4 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (., 4.7, 6.8) 8*** 478*** 688*** R/R DUE TO B tol. - 4 45. 64.9 9.7-4.97 8.8-5 5.5 5. 7.6-4.8 7. - 7.84 9.64 57.6-4.64 6.55-5.16 1.56 45.66-4.48 5.84-17.78 5. 6.6-4. 5.15-15 14.7.46 9.6-4.19 4.49-1 11.69 16.65 4.9-4.5.85-5 9.58 1.65 19.74 -.9.4 7.94 11.6 16.9 -.79.65 5 6.56 9.44 1.5 -.66.8 1 5.479 7.8 11.9 -.55 1.54 15 4.6 6.554 9.48 -.4 1.1.886 5.55 8.8 -..49 5. 4.7 6.8 -...816 4.11 5.8 -.1.48 5.415.44 4.977 -..94 4.81.964 4.89 -.9 1.9 45 1.81.566.71 -.84 1.8 5 1.566..7 -.76.4 55 1.67 1.947.817 -.68.65 6 1.198 1.76.469 -.6.4 65 1.54 1.51.17 -.5.4 7.98 1.6 1.918 -.45.8 75.848 1.175 1.7 -.8 4.16 8.74 1.44 1.511 -. 4.51 85.654.918 1.48 -.5 4.85 9.5854.88 1.6 -.19 5.19 95.555.7484 1.8 -.1 5.51 1.47.677.9748 -.7 5.8 15.47.68.8799 -. 6.1 11.865.555.7965-1.97 6.4 115.58.4996.78-1.9 6.7 1.19.4545.6576-1.87 7. 15.911.4145.5998-1.8 7.8 1.661.789.548-1.77 7.55 15.48.47.5-1.7 7.81 14.8.188.461-1.69 8.7 145.59.9.444-1.65 8. 15.1899.74.91-1.61 8.56 Revision: 4-Aug-1 5 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (1, 15, ) 19*** R/R DUE TO B tol. 159*** R/R DUE TO B tol. 9*** R/R DUE TO B tol. - 4 16.7-4.86 8.9 4.8-5.16 8.65 74.9-5.54 8.8-5 17.6-4.7 7.58 174.5-4.98 7.79 85.8-5.1 7.95-85. - 4.58 6.81 16.6-4.8 6.98.4-5.1 7.14-5 68.1-4.44 6.6 17.9-4.64 6.1 171.7-4.9 6.6-54.7-4.1 5.5 85.94-4.48 5.47 15. - 4.71 5.61-15 44.5-4.18 4.66 68.96-4. 4.76 17. - 4.5 4.89-1 6. - 4.6 4. 55.74-4.19 4.8 85.79-4.7 4. - 5 9.49 -.94.7 45.7-4.5.4 69.1-4..5 4. -.8.75 7.17 -.9.81 56.6-4.7.89 5.1 -.71.16.65 -.8. 46.5 -.94.7 1 16.77 -.6 1.59 5.4 -.68 1.6 7.94 -.81 1.67 15 14.4 -.5 1.4 1.1 -.57 1.6 1.45 -.69 1.1 11.8 -.9.51 17.79 -.46.5 6. -.57.54 5 1. -.. 15. -.6.. -.47. 8.5 -..5 1.76 -.6.49 18.55 -.6.5 5 7.59 -.11.98 1.86 -.17.98 15.7 -.6 1. 4 6.6 -. 1.44 9.91 -.8 1.46 1.8 -.17 1.51 45 5.6 -.94 1.89 7.98 -.99 1.9 11.45 -.8 1.98 5 4.69 -.86. 6.887 -.91.6 9.8 -..44 55 4.9 -.78.75 5.966 -.8.79 8.48 -.9.88 6.51 -.71.16 5.189 -.75.1 7.46 -.84. 65.7 -.64.56 4.59 -.68.6 6.86 -.76.7 7.698 -.57.95.968 -.61 4. 5.57 -.69 4.14 75.77 -.5 4..488 -.54 4.41 4.879 -.6 4.5 8.11 -.4 4.69.77 -.48 4.78 4.86 -.56 4.91 85 1.864 -.7 5.4.7 -.41 5.15.777 -.5 5.9 9 1.658 -.1 5.8.416 -.5 5.51.9 -.44 5.65 95 1.479 -.5 5.7.151 -. 5.85.96 -.8 6. 1 1. -. 6.5 1.9 -.4 6.19.6 -. 6.4 15 1.187 -.14 6.6 1.719 -.19 6.5.47 -.7 6.68 11 1.68 -.9 6.67 1.54 -.1 6.85.98 -. 7. 115.965 -.4 6.98 1.89 -.8 7.17 1.88 -.17 7. 1.871-1.99 7.7 1.5 -. 7.48 1.689 -.1 7.6 15.7897-1.94 7.56 1.1-1.99 7.78 1.51 -.7 7.9 1.7174-1.9 7.84 1.7-1.94 8.8 1.7 -. 8. 15.65-1.85 8.11.96-1.9 8.7 1.4-1.98 8.5 14.5961-1.81 8.7.849-1.86 8.65 1.16-1.94 8.78 145.5451-1.77 8.6.7744-1.8 8.9 1. - 1.9 9.6 15.4995-1.7 8.89.779-1.78 9..99-1.86 9. Revision: 4-Aug-1 6 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (, 47, 68) 9*** 479*** 689*** R/R DUE TO B tol. - 4 77. 17 1457-5.94 9. - 5 58.5 75.7 189-5.7 8.44-99.5 569. 8. - 5.49 7.6-5 5. 44.8 69.1-5.8 6.79-5.6 5.6 485.5-5.9 6.1-15 18.5 61.4 78. - 4.9 5.5-1 144. 5.5 97. - 4.7 4.51-5 114. 16.8 5.6-4.57.8 91.4 1.1 188. - 4.4.11 5 7.51 14.7 151.5-4.7.45 1 59.59 84.87 1.8-4.1 1.8 15 48.6 69.6 1. - 4. 1.18 9.94 56.88 8.9 -.88.58 5. 47. 68. -.76. 7.4 9.6 56.51 -.64.56 5.9.64 47. -.54 1.11 4 19.6 7.4 9.68 -.4 1.6 45 16.6.16.5 -.4.14 5 1.79 19.65 8.4 -.4.6 55 11.76 16.74 4. -.15.11 6 1.6 14..74 -.7.57 65 8.65 1. 17.8 -.98 4. 7 7.468 1.64 15.9 -.9 4.45 75 6.471 9.16 1. -.8 4.87 8 5.68 8.15 11.6 -.76 5.7 85 4.91 6.996 1.1 -.69 5.66 9 4. 6.17 8.865 -.6 6.4 95.78 5.84 7.79 -.55 6.41 1. 4.746 6.867 -.49 6.77 15.946 4.196 6.71 -.4 7.11 11.61.71 5.84 -.7 7.45 115.4.1 4.788 -. 7.77 1.7.951 4.7 -.6 8.9 15 1.85.69.818 -.1 8.9 1 1.661.65.4 -.16 8.69 15 1.49.15.75 -.11 8.97 14 1.44 1.914.77 -.7 9.5 145 1.1 1.78.5 -. 9.5 15 1.98 1.564.6-1.98 9.79 Revision: 4-Aug-1 7 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (1, 15,,, 47, 68) 11*** 151*** 1*** 1*** 471*** 681*** - 4 19 89 484 76 1 5 14 91-5.75 4.99-5 165 478 65 545 7766 11 5-5.57 4.51-156 1884 76 4144 59 854-5.4 4.5-5 96.5 1444 117 176 454 6545-5.4.61-74.6 1115 166 454 495 557-5.8.19-15 579. 868.5 174 1911 71 97-4.9.78-1 454. 681. 999.1 1499 15 88-4.78.8-5 58.8 58. 789.4 1184 1686 44-4.64.1 85.4 48. 68. 94. 14 1941-4.51 1.64 5 8.6 4.9 5.9 754.4 174 1554-4.8 1.9 1 184. 76.4 45. 68. 866. 15-4.5.95 15 149.4 4.1 8.7 49.1 7. 116-4.1.6 11.9 18.8 68. 4. 57.9 88.8-4.1.1 5 1. 15... 47. 68. -.9. 8.49 1.7 181.5 7. 87.7 561. -.8. 5 68.41 1.6 15.5 5.8 1.5 465. -.69.58 4 57. 85.54 15.5 188. 68. 87.8 -.59.86 45 47.77 71.65 15.1 157.6 4.5 4.8 -.5 1.1 5 4. 6. 88.44 1.7 188.9 7. -.4 1.9 55.98 5.98 74.76 11.1 159.7 1.1 -.1 1.64 6 8.86 4.8 6.48 95. 15.6 196. -. 1.88 65 4.61 6.91 54.1 81. 115.6 167. -.15.1 7 1.7 1.6 46.5 69.5 99.1 14. -.7.5 75 18.11 7.16 9.84 59.76 85.11 1.1 -.99.57 8 15.6.4 4.7 51.56 7.4 16. -.91.79 85 1.5.9 9.76 44.65 6.59 9. -.84. 9 11.76 17.6 5.86 8.8 55.6 79.95 -.77.1 95 1.5 15.8.55.8 48.18 69.71 -.71.41 1 8.968 1.45 19.7 9.59 4.15 6.98 -.64.6 15 7.871 11.81 17. 5.97 6.99 5.5 -.58.79 11 6.98 1.9 15.4.86.56 47.11 -.5.97 115 6.117 9.176 1.46.19 8.75 41.6 -.46 4.15 1 5.416 8.15 11.9 17.87 5.46 6.8 -.41 4. 15 4.89 7.14 1.58 15.87.6.7 -.5 4.5 1 4.8 6.4 9.419 14.1.1 9.11 -. 4.66 15.8 5.7 8.48 1.61 17.96 5.99 -.5 4.8 14.4 5.1 7.5 11.9 16.7.5 -. 4.99 145.68 4.61 6.749 1.1 14.4.86 -.15 5.14 15.758 4.17 6.68 9.1 1.96 18.76 -.1 5.9 R/R DUE TO B tol. Revision: 4-Aug-1 8 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (1, 1.5, ) k 1*** 15*** *** R/R DUE TO B tol. - 4 4 5 1 46 684-6.6 1.65-5 17 6 6 4 4 67-5.84 1.49-1 18 19 56 6 5-5.6 1.4-5 9877 14 816 19 754-5.4 1.19-7569 11 5 15 18-5. 1.5-15 5855 878 11 79-5.5.9-1 4569 6854 918-4.87.79-5 596 595 719-4.71.66 854 48 577-4.55.54 5 8 4 456-4.4.4 1 188 757 675-4.6.1 15 1491 6 981-4.1.1 117 186 44 -.99.1 5 1 15 -.87. 86.6 14 165 -.75.1 5 687. 11 175 -.6.19 4 574.6 861.9 1149 -.5.8 45 48.7 74. 965.4 -.4.7 5 47.4 611. 814.7 -..46 55 45. 517.8 69.5 -..54 6 9.7 44.6 587.4 -.14.6 65 5.8 76. 51.6 -.5.7 7 14.9.4 49.8 -.97.78 75 184.7 77.1 69.5 -.89.86 8 159. 8.9 18.6 -.81.9 85 17.7 6.6 75.5 -.7 1.1 9 119.4 179.1 8.8 -.66 1.8 95 1.8 155.7 7.6 -.59 1.15 1 9.45 15.7 18.9 -.5 1. 15 79. 118.5 158. -.46 1.9 11 69.15 1.7 18. -.4 1.5 115 6.66 9.99 11. -.4 1.4 1 5. 79.98 16.6 -.9 1.48 15 46.96 7.44 9.9 -. 1.55 1 41.4 6.15 8.87 -.18 1.61 15 6.6 54.94 7.5 -.1 1.67 14.4 48.65 64.87 -.8 1.7 145 8.77 4.16 57.54 -. 1.79 15 5.56 8.4 51.1-1.98 1.85 Revision: 4-Aug-1 9 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (.,.7,., 4.7, 5., 6.8, 1) k *** 7*** *** 47*** 5*** 68*** 1*** - 4 7 61 89 665 19 591 156 84 166 47 5 84 94-6.6.79-5 5 778 64 77 79 167 11 75 119 95 16 1 9 9-6.9.5-8 544 47 4 57 816 8 44 87 6 119 16 175-6.18.6-5 8 44 4 97 4 665 6 765 64 64 87 915 19 87-5.98. - 1 199 6 17 1 798 45 88 48 179 65 54 96 58-5.78 1.78-15 15 95 19 575 95 4 75 6 5 49 7 5-5.6 1.55-1 1 11 14 86 18 165 5 87 7 5 7 41 55 46-5.4 1. - 5 975 11 8 1 91 19 814 1 78 8 667 4 157-5.5 1.1 716 879 1 74 15 16 77 17 554-5.9.9 5 5574 6841 86 11 99 1 669 17 5 9-4.9.7 1 47 565 6558 94 996 1 51 19 87-4.79.5 15 454 49 518 778 7849 1 675 15 698-4.64.5 747 7 411 5869 644 849 1 488-4.51.17 5 7 47 5 68 1-4.8. 177 176 659 788 4 548 859-4.5.17 5 148 1764 156 71 67 4444 655-4.1. 4 117 149 1759 55 665 64 5-4..48 45 961.8 118 144 55 186 97 47 -.91.6 5 79. 97.4 119 1694 18 45 65 -.8.77 55 657.5 86.9 986. 145 1494 989 -.7.91 6 547.8 67. 81.7 117 145 169 49 -.6 1.5 65 458.6 56.8 687.9 979.7 14 1417 84 -.51 1.18 7 85.7 47. 578.5 8.9 876.5 119 175 -.4 1.1 75 5.8 99.8 488.7 696. 74.5 17 1481 -. 1.44 8 76.4 9. 414.6 59.5 68. 854. 156 -.5 1.56 85 5.5 89. 5. 5. 55. 77.8 17 -.17 1.68 9 1.4 47..1 4. 457.7 6.5 915.4 -.9 1.79 95 17.9 1. 59.4 69.4 9. 54.5 786. -.1 1.9 1 149. 18.9.5 18. 8.6 46.6 677. -.94.1 15 18.9 158. 19. 75. 9.9 98. 585.7 -.87.1 11 111.8 17. 167.7 8.9 54. 45.7 58. -.8. 115 97.7 119.5 146.1 8. 1. 1. 44.6 -.74. 1 85.5 14.4 17.6 181.7 19. 6.9 86.6 -.67.4 15 74.5 91.46 111.8 159. 169.4. 8.7 -.61.51 1 65.49 8.8 98.4 19.9 148.8.4 97.7 -.55.61 15 57.7 7.84 86.59 1. 11. 178.4 6.4 -.5.7 14 51. 6.6 76.5 19. 116. 157.7 1.9 -.44.78 145 45. 55.49 67.8 96.6 1.8 19.8 5.5 -.9.87 15 4.18 49.1 6.7 85.84 91. 14. 18.6 -.4.96 R/R DUE TO B tol. Revision: 4-Aug-1 1 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (1, 15, ) k 1*** 15*** *** R/R DUE TO B tol. - 4 9.4 86.7 567. - 6.7 7. - 5 9.5 86.9 4.8-5.88 6. - 171.8 14.8 15. - 5.7 5.68-5 19.8 16. 8. - 5.5 5.6-98.9 1.7 181.4-5.5 4.46-15 76. 95. 19.4-5.19.89-1 58.88 7.6 17.9-5..4-5 45.95 57.44 84.5-4.88.81 6.1 45.16 66.4-4.74. 5 8.61 5.76 5.45-4.6 1.8 1.8 8.51 41.81-4.47 1. 15 18..87.55-4.4.87 14.77 18.47 7.8-4..4 5 1. 15.. - 4.1. 9.84 1.5 17.97 -.99.41 5 8.54 1.7 14.77 -.88.81 4 6.65 8.15 1. -.77 1. 45 5.5 6.9 1.1 -.67 1.58 5 4.67 5.759 8.447 -.58 1.94 55.86 4.88 7.81 -.48.9 6.5 4.66 5.96 -.9.64 65.751.49 5.44 -..97 7.7.91 4.84 -..9 75 1.99.49.654 -.14.6 8 1.77.14.19 -.6.91 85 1.467 1.84.69 -.99 4. 9 1.66 1.58.1 -.9 4.49 95 1.96 1.7.1 -.85 4.77 1.954 1.19 1.746 -.78 5.4 15.8 1.8 1.5 -.71 5.1 11.76.975 1.1 -.65 5.56 115.669.7961 1.168 -.59 5.8 1.564.75 1.7 -.5 6.6 15.4945.6181.965 -.47 6. 1.475.5469.8 -.4 6.5 15.88.485.7117 -.7 6.76 14.454.417.6 -.1 6.98 145.8.85.5647 -.6 7. 15.754.44.549 -. 7.41 Revision: 4-Aug-1 11 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (, 47, 5, 68, 1) k *** 47*** R/R DUE TO B tol. 5*** 68*** 14*** R/R DUE TO B tol. - 4 1116 1589-6.54 5.74 18 49 666-6.69 5.88-5 88.6 115-6.4 5.19 119 1794 68-6.49 5.1-591.7 84.8-6.15 4.66 958. 1 1917-6.9 4.77-5 47.1 6.6-5.96 4.15 7.1 956. 146-6.1 4.5-5.9 464.1-5.79.66 5.6 78. 141-5.9.75-15 45. 49. - 5.6.19 88.9 58.9 777.8-5.75.7-1 185.8 64.6-5.45.74 9. 98.5 586.1-5.58.8-5 14.. - 5...6.8 445. - 5.4.6 19.4 155.8-5.14 1.88 17.5 1.8 4.9-5.6 1.9 5 84.91 1.9-5. 1.48 11.5 178.9 6.1-5.11 1.5 1 66.7 94.5-4.86 1.9 1. 19. 4.4-4.97 1.1 15 5.4 74.4-4.7.71 8.1 18.8 16. - 4.8.7 41.9 58.95-4.59.5 6.4 85.74 16.1-4.7.6 5. 47. - 4.47. 5. 68. 1. - 4.57. 6.47 7.71-4.5.4 9.9 54.7 79.81-4.45.5 5 1.7.4-4..67.4 4.57 64.8-4..68 4 17.4 4.7-4.1.99 5.87 5.19 51.75-4. 1.1 45 14.15.15-4.1 1.9 1.1 8.57 4. - 4.11 1. 5 11.61 16.5 -.91 1.59 17.15. 4.1-4. 1.6 55 9.57 1.6 -.81 1.88 14.8 19.15 8.16 -.9 1.9 6 7.91 11. -.71.16 11.61 15.79. -.8.1 65 6.6 9.44 -.6.4 9.6 1.9 19.5 -.71.49 7 5.5 7.865 -.5.7 8.1 1.9 16. -.6.76 75 4.69 6.67 -.44.95 6.71 9.114 1.4 -.5. 8.91 5.57 -.6. 5.69 7.655 11.6 -.45.8 85.15 4.71 -.8.45 4.748 6.457 9.496 -.6.5 9.819 4.15 -..68 4.1 5.469 8.4 -.8.77 95.46.47 -.1.91.419 4.649 6.87 -.1 4.1 1.6.96 -.5 4.1.918.968 5.85 -.1 4.4 15 1.77.55 -.98 4.5.499.99 4.998 -.6 4.46 11 1.5.179 -.9 4.56.148.91 4.96 -.99 4.68 115 1.4 1.886 -.85 4.77 1.85.519.75 -.9 4.89 1 1.15 1.68 -.79 4.97 1.6.18.6 -.86 5.9 15 1. 1.47 -.7 5.17 1.9 1.89.78 -.8 5.9 1.8757 1.47 -.67 5.6 1.1 1.648.4 -.74 5.49 15.7675 1.9 -.61 5.54 1.58 1.49.116 -.68 5.68 14.6746.968 -.55 5.7.969 1.61 1.854 -.6 5.87 145.5946.8468 -.5 5.9.8141 1.17 1.68 -.57 6.5 15.554.748 -.45 6.8.717.975 1.44 -.51 6. Revision: 4-Aug-1 1 Document Number: 949
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 5 AT (15,,, 47) k 154*** 4*** R/R DUE TO B tol. 4*** 474*** R/R DUE TO B tol. - 4 615 94-6.8 1. 16 44 85-7.14 6.41-5 494 6444-6.64 9.4 11 8 16 68-6.94 5.8-168 4646-6.45 8.9 81 11 41-6.74 5. - 5 5 81-6.7 7.9 5747 8185-6.55 4.64-169 48-6.9 6.5 4161 596-6.7 4.9-15 154 189-5.9 5.68 4 49-6.19.57-1 96.4 17-5.75 4.88 4 19-6..6-5 75. 14-5.6 4.1 1665 71-5.85.57 55. 784.7-5.44.6 148 1777-5.69.11 5 49.1 6. - 5.9.64 94. 14-5.54 1.65 1 15.1 46.1-5.15 1.94 717.1 11-5.9 1. 15 44.4 58.4-5.1 1.7 549.8 78. - 5.4.8 19.8 79.9-4.88.6 44.5 64.6-5.1.9 5 15.. - 4.75.. 47. - 4.97. 118.6 174. - 4.6.6 58. 67.8-4.84.8 5 94.4 18.5-4.51 1.19.4 89.6-4.7.75 4 75.58 11.9-4.9 1.76 161.1 9.5-4.59 1.1 45 6.85 89.4-4.8. 18.4 18.9-4.48 1.45 5 49.5 7.4-4.17.8 1. 146.7-4.7 1.78 55 4.8 58.78-4.7.5 8. 118. - 4.6.1 6.78 48.8 -.97.85 67.6 95.8-4.15.41 65 6.94 9.51 -.87 4. 54.79 78.4-4.5.7 7.5.6 -.78 4.8 44.85 6.88 -.95.1 75 18.46 7.7 -.69 5.6 6.9 5.55 -.86. 8 15.8.56 -.6 5.7.49 4.4 -.77.58 85 1.87 18.88 -.5 6.14 5.1 6.5 -.68.85 9 1.8 15.87 -.44 6.56 1.1.6 -.59 4.11 95 9.19 1.9 -.6 6.96 17.67 5.16 -.51 4.7 1 7.7 11.4 -.8 7.6 14.85 1.15 -.4 4.6 15 6.574 9.64 -.1 7.75 1.5 17.85 -.5 4.86 11 5.61 8.8 -.14 8.1 1.6 15.1 -.8 5.1 115 4.84 7.46 -.7 8.49 9.9 1.86 -.1 5. 1 4.18 6.54 -. 8.85 7.74 1.97 -.14 5.55 15.559 5.19 -.94 9. 6.597 9.96 -.7 5.77 1.78 4.514 -.87 9.54 5.668 8.7 -. 5.99 15.67.916 -.81 9.87 4.885 6.958 -.94 6. 14..48 -.75 1. 4.4 6.16 -.88 6.4 145.8.974 -.69 1.5.66 5.17 -.8 6.6 15 1.774.6 -.64 1.8.186 4.58 -.76 6.79 Revision: 4-Aug-1 1 Document Number: 949
PACKAGING TAPE SPECIFICATIONS Thermistors on tape D P P H T H H d L D H H 1 W W 1 A W W P P 1 F Direction of unreeling t Taped according to IEC 686- (cover tape may differ from shown) 1E pitch...t1 detail A DIMENSIONS in millimeters DETAILS SYMBOL DIMENSIONS NOMINAL TOLERANCE REMARKS Body diameter Lead diameter Feed hole diameter D d D..6 4. ±.5 ±.6 ±. Lead to lead distance F.54 ±. Distance component to tape centre Component height Component alignment Distance top/bottom of components Length of lacquer under the comp. bottom H H 1 h H H.. 6 Length of snipped lead L 11. max. Pitch between thermistors Feed hole pitch Feed hole center to lead center Component alignment Total thickness Total tape thickness Tape width Hold down tape width Hole position Hold down tape position P P P 1 p 1.7 1.7 5.8 T. t.9 W 18. W W 1 W 5. 9. 1.5 5 max. for. to Guaranteed between component and tape ± 1. max. ±. max. ± 1 1 to 4 max. for. to ± 1. ±. ±.7 ± 1. max. max. ± 1. -.5 ±. ±.5 ± 1. Cumulative pitch error ± 1 mm/ pitches guaranteed between component and tape 4 max. for. to with cardboard tape.5 ±.1 None of the hold down tapes may cover the holes Revision: 4-Aug-1 14 Document Number: 949
Thermistors on tape P T D Δp ΔH H 1 H D d H H L W 1 W W P P 1 F W t Taped according to IEC 686- (cover tape may differ from shown) E pitch...t DIMENSIONS in millimeters DETAILS SYMBOL DIMENSIONS NOMINAL TOLERANCE REMARKS Body diameter Lead diameter Feed hole diameter D d D..6 4. ±.5 ±.6 ±. 5 max. for. to Lead to lead distance F 5. Distance component to tape centre Component height Component alignment Distance top/bottom of components Length of lacquer under the comp. bottom H H H 1 h H. 16. 1.. +.6 -.1 ±. ±.5 max. ±. Length of snipped lead L 11. max. Pitch between thermistors Feed hole pitch Feed hole center to lead center Component alignment Total thickness Total tape thickness Tape width Hold down tape width Hole position Hold down tape position P P P 1 p 1.7 1.7.81. T. t.9 W 18. W W 1 W 5. 9. 1.5 ± 1. ±. ±.7 ± 1. max. max. ± 1. -.5 ±. ±.5 ± 1. Guaranteed between component and tape 1 max. for 1 to Not defined Cumulative pitch error ± 1 mm/ pitches guaranteed between component and tape 4 max. for. to with cardboard tape.5 ±.1 None of the hold down tapes may cover the holes Revision: 4-Aug-1 15 Document Number: 949
REEL SPECIFICATIONS Dimensions of the reel 18 CODE NUMBERS AND RELEVANT PARAMETER Quantity BULK...B 5 TAPE AND REEL 1E PITCH (1) TAPE AND REEL E PITCH (1)...T1...T 15 per reel, reels per box 15 per reel, reels per box CHARACTERISTICS OF TAPED PRODUCTS 16 +1-77 85.6 9 56 max. Minimum pull-out force of the component: 5 N Minimum peel-off force of adhesive tape: 6 N Minimum tearing force tape: 15 N Minimum pull-off force of tape-reel: 5 N.5 STORAGE CONDITIONS Storage temperature range: - 5 C to + 4 C Maximum relative humidity: 8 %, non-condensing 4 ±1 56 max. TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with IEC publication 6 68-; Environmental testing, except where indicated. STABILITY TESTS CECC 1 CLAUSE IEC 668- TEST METHOD Notes (1) For R 5 1 k the drift requirement is R/R < 5 % () For R 5 from. k to 1 k, requirement is ± % max. TEST PROCEDURE REQUIREMENTS D; 4..1 Endurance 5 C; 1 h R/R < 1 % 1 Endurance - 4 C; 1 h R/R < 1 % 59 Endurance 5 mw; 55 C; 1 h R/R < % (1) Dry heat, (steady state) 15 C; 1 h R/R < % D1; 4.19 Damp heat (steady state) 56 days at 4 C; 9 % to 95 % RH R/R < % C; 4.14 14 Rapid change of temperature - 4 C to + 15 C; 5 cycles R/R < % Other applicable tests 1 58 Robustness of leads: Tensile strength Bending Soldering: Solderability Resistance to heat Loading force 1 N Loading force 5 N 4 C max.; duration 4 s max. 65 C max.; duration 5 s max. R/R 1 % R/R 1 % () 7 Impact Free fall; 1 m R/R 1 % 9 Shock 49 m/s; half sinewave R/R 1 % 45 Resistance to solvent (isopropanol) 6 Vibration Ambient temp for 5 minutes; 5 N with hydrophylic cotton wool 1.5 mm peak to peak: 1 Hz to 58 Hz 1 gp: 5 Hz to 5 Hz 1 octave/min. h in each direction in three orthogonal directions No traces of lacquer on cotton wool No visible damage R/R < 1 % 6695-- Inflammability 198, needle flame test Non-flammable Revision: 4-Aug-1 16 Document Number: 949
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 1-Jun-16 1 Document Number: 91