Metallized Polyester Film Capacitors (MKT and MFT)

Metallized Polyester Film Capacitors (MKT and MFT) Plastic Case B30 B39 Standard applications Construction Dielectric: polyethylene terephthalate (polyester) Stacked-ilm technology or lead spacing and 7, mm as well as or and 1 mm (3 00 Vdc) Wound capacitor technology or lead spacing mm (30 Vdc), or lead spacing 1 mm (0... 30 Vdc), or lead spacing, and 7, mm Plastic case (UL 9 V-0) Epoxy resin sealing Features High pulse strength High contact reliability Terminals Parallel wire leads, tinned Also available with (3, ± 0,3) mm lead length Special lead lengths available upon request Dimensions in mm Lead spacing Diameter d 1 Type ± 0,,0 0, B 3 9 7, 0, B 3 0,0 0, 1) /0, B 3 1 1,0 0,8 B 3, 0,8 B 3 3 7, 0,8 B 3 1) 0, mm or capacitor width b = mm Marking Manuacturer s logo, lot number, style and type (Txx) or lead spacing mm, type (coded) or lead spacing mm (B39 =ˆ 1), rated capacitance (coded), capacitance tolerance (code letter), rated dc voltage, date o manuacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, reer to chapter Taping and packing, page 7. 1 1/00

MKT B 3 0 B 3 9 Overview o available types Lead mm 7, mm mm 1 mm, mm 7, mm spacing Type B 3 9 B 3 0 B 3 1 B 3 B 3 3 B 3 Page 17 1 3 7 8 1,0 nf 1, nf, nf 3,3 nf,7 nf 0 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc,8 nf nf 1 nf nf 33 nf 7 nf 8 nf 0, µf 0,1 µf 0, µf 0,33 µf 0,7 µf 0,8 µf 1,0 µf 1, µf, µf 3,3 µf,7 µf,8 µf µf 1 µf µf 33 µf Note Stacked-ilm technology Stacked-ilm/ Wound capacitor technology 3 Vdc 0 Vdc 0 Vdc 00 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc Wound capacitor technology 1 1/00

B39 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (3 ) 3 Vdc (0 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,33 µf 3,0, 7, B39-C33-+ *** 700 00 000 0,7 µf 3, 8,0 7, B39-C7-+ *** 300 000 000 0,8 µf, 9, 7,3 B39-C8-+ *** 1800 100 100 1,0 µf, 9, 7,3 B39-C-+ *** 1800 100 100 1, µf,0, 7, B39-C1-+ *** 1300 10 00, µf 7,8 13,0 7,8 B39-D-+ *** 00 800 00 3,3 µf 7,8 13,0 7,8 B39-D33-+ *** 00 800 00 1,0 nf,, 7, B39-C-+ *** 300 800 000 1, nf,, 7, B39-C1-+ *** 300 800 000, nf,, 7, B39-C-+ *** 300 800 000 3,3 nf,, 7, B39-C33-+ *** 300 800 000,7 nf,, 7, B39-C7-+ *** 300 800 000,8 nf,, 7, B39-C8-+ *** 300 800 000 nf,, 7, B39-C3-+ *** 300 800 000 1 nf,, 7, B39-C13-+ *** 300 800 000 nf,, 7, B39-C3-+ *** 300 800 000 33 nf,, 7, B39-C333-+ *** 300 800 000 7 nf,, 7, B39-C73-+ *** 300 800 000 8 nf,, 7, B39-C83-+ *** 300 800 000 0, µf,, 7, B39-C-+ *** 300 800 000 0,1 µf,, 7, B39-C1-+ *** 300 800 000 0, µf,, 7, B39-C-+ *** 300 800 000 0,33 µf 3,0, 7, B39-C33-+ *** 700 00 000 0,7 µf 3, 8,0 7, B39-C7-+ *** 300 000 000 0,8 µf, 9, 7,3 B39-C8-+ *** 1800 100 100 1,0 µf, 9, 7,3 B39-C-+ *** 1800 100 100 1, µf,0, 7, B39-C1-+ *** 1300 10 00, µf 7,8 13,0 7,8 B39-D-+ *** 00 800 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C33-K3 17 1/00

MKT B39 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (3 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf,, 7, B39-C1-+ *** 300 800 000 1, nf,, 7, B39-C11-+ *** 300 800 000, nf,, 7, B39-C1-+ *** 300 800 000 3,3 nf,, 7, B39-C133-+ *** 300 800 000,7 nf,, 7, B39-C17-+ *** 300 800 000,8 nf,, 7, B39-C18-+ *** 300 800 000 nf,, 7, B39-C13-+ *** 300 800 000 1 nf,, 7, B39-C113-+ *** 300 800 000 nf,, 7, B39-C13-+ *** 300 800 000 33 nf,, 7, B39-C1333-+ *** 300 800 000 7 nf,, 7, B39-C173-+ *** 300 800 000 8 nf,, 7, B39-C183-+ *** 300 800 000 0, µf,, 7, B39-C1-+ *** 300 800 000 0,1 µf 3,0, 7, B39-C11-+ *** 700 00 000 0, µf 3, 8,0 7, B39-C1-+ *** 300 000 000 0,33 µf 3, 8,0 7, B39-C133-+ *** 300 000 000 0,7 µf, 9, 7,3 B39-C17-+ *** 1800 100 100 0,8 µf,0, 7, B39-C18-+ *** 1300 10 00 1,0 µf 7,8 13,0 7,8 B39-D1-+ *** 00 800 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C1-K3 18 1/00

B39 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf,, 7, B39-C3-+ *** 300 800 000 1, nf,, 7, B39-C31-+ *** 300 800 000, nf,, 7, B39-C3-+ *** 300 800 000 3,3 nf,, 7, B39-C333-+ *** 300 800 000,7 nf,, 7, B39-C37-+ *** 300 800 000,8 nf,, 7, B39-C38-+ *** 300 800 000 nf,, 7, B39-C33-+ *** 300 800 000 1 nf,, 7, B39-C313-+ *** 300 800 000 nf,, 7, B39-C33-+ *** 300 800 000 33 nf 3,0, 7, B39-C3333-+ *** 700 00 000 7 nf 3, 8,0 7, B39-C373-+ *** 300 000 000 8 nf, 9, 7,3 B39-C383-+ *** 1800 100 100 0, µf, 9, 7,3 B39-C3-+ *** 1800 100 100 0,1 µf,0,0 7, B39-C31-+ *** 100 100 0, µf 7,8 13,0 7,8 B39-D3-+ *** 00 800 00 0,33 µf 7,8 13,0 7,8 B39-C333-+ *** 00 800 00 0,7 µf 7,8 13,0 7,8 B39-C37-+ *** 00 800 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C3-K3 19 1/00

MKT B39 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 1,0 nf,, 7, B39-C-+ *** 300 800 000 1, nf,, 7, B39-C1-+ *** 300 800 000, nf,, 7, B39-C-+ *** 300 800 000 3,3 nf,, 7, B39-C33-+ *** 300 800 000,7 nf,, 7, B39-C7-+ *** 300 800 000,8 nf,, 7, B39-C8-+ *** 300 800 000 nf 3,0, 7, B39-C3-+ *** 700 00 000 1 nf 3, 8,0 7, B39-C13-+ *** 300 000 000 nf, 9, 7,3 B39-B3-+ *** 1800 100 100 33 nf,0,0 7, B39-B333-+ *** 100 100 7 nf,0, 7, B39-B73-+ *** 1300 10 00 8 nf 7,8 13,0 7,8 B39-D83-+ *** 00 800 00 0, µf 7,8 13,0 7,8 B39-D-+ *** 00 800 00 1,0 nf,, 7, B39-C8-+ *** 300 800 000 1, nf,, 7, B39-C81-+ *** 300 800 000, nf,, 7, B39-C8-+ *** 300 800 000 3,3 nf 3, 8,0 7, B39-C833-+ *** 300 000 000,7 nf 3, 8,0 7, B39-C87-+ *** 300 000 000,8 nf 3, 8,0 7, B39-C88-+ *** 300 000 000 nf,0,0 7, B39-C83-+ *** 100 100 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C-K3 0 1/00

B30 MKT 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 8 nf, 7,0,0 B30-C83-+ *** 300 800 00 0, µf, 7,0,0 B30-C-+ *** 300 800 00 0,1 µf, 7,0,0 B30-C1-+ *** 300 800 00 0, µf, 7,0,0 B30-C-+ *** 300 800 00 0,33 µf, 7,0,0 B30-C33-+ *** 300 800 00 0,7 µf 3,0 8,0,0 B30-C7-+ *** 00 00 000 0,8 µf,0 8,,0 B30-C8-+ *** 000 1800 100 1,0 µf,0,,0 B30-C-+ *** 100 00 1, µf,0,,0 B30-C1-+ *** 100 00, µf,0 1,0,3 B30-C-+ *** 1300 10 70 7 nf, 7,0,0 B30-C173-+ *** 300 800 00 8 nf, 7,0,0 B30-C183-+ *** 300 800 00 0, µf, 7,0,0 B30-C1-+ *** 300 800 00 0,1 µf 3,0 8,0,0 B30-C11-+ *** 00 00 000 0, µf 3,0 8,0,0 B30-C1-+ *** 00 00 000 0,33 µf,0 8,,0 B30-C133-+ *** 000 1800 100 0,7 µf,0,,0 B30-C17-+ *** 100 00 0,8 µf,0 1,0,3 B30-C18-+ *** 1300 10 70 1,0 µf,0 1,0,3 B30-C1-+ *** 1300 10 70 1 nf, 7,0,0 B30-C313-+ *** 300 800 00 nf, 7,0,0 B30-C33-+ *** 300 800 00 33 nf, 7,0,0 B30-C3333-+ *** 300 800 00 7 nf, 7,0,0 B30-C373-+ *** 300 800 00 8 nf 3,0 8,0,0 B30-C383-+ *** 00 00 000 0, µf,0 8,,0 B30-C3-+ *** 000 1800 100 0,1 µf,0,,0 B30-C31-+ *** 100 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B30-C83-K3 1 1/00

MKT B30 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 00 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf, 7,0,0 B30-C-+ *** 300 800 00 1, nf, 7,0,0 B30-C1-+ *** 300 800 00, nf, 7,0,0 B30-C-+ *** 300 800 00 3,3 nf, 7,0,0 B30-C33-+ *** 300 800 00,7 nf, 7,0,0 B30-C7-+ *** 300 800 00,8 nf, 7,0,0 B30-C8-+ *** 300 800 00 nf, 7,0,0 B30-C3-+ *** 300 800 00 1 nf 3,0 8,0,0 B30-C13-+ *** 00 00 000 nf,0 8,,0 B30-C3-+ *** 000 1800 100 33 nf,0,,0 B30-C333-+ *** 100 00 7 nf,0,,0 B30-C73-+ *** 100 00 8 nf,0 1,0,3 B30-C83-+ *** 1300 10 70 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B30-C-K3 1/00

B31 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,7 µf,0 7,0 13,0 B31-C7-+ *** 00 1700 00 0,8 µf,0 7,0 13,0 B31-C8-+ *** 00 1700 00 1,0 µf,0 9,0 13,0 B31-C-+ *** 00 1700 00 1, µf,0 11,0 13,0 B31-C1-+ *** 830 1300 00, µf,0 11,0 13,0 B31-C-+ *** 830 1300 00 3,3 µf,0 1,0 13,0 B31-C33-+ *** 80 10 00 0, µf,0 7,0 13,0 B31-C1-+ *** 00 1700 00 0,1 µf,0 7,0 13,0 B31-C11-+ *** 00 1700 00 0, µf,0 7,0 13,0 B31-C1-+ *** 00 1700 00 0,33 µf,0 7,0 13,0 B31-C133-+ *** 00 1700 00 0,7 µf,0 9,0 13,0 B31-C17-+ *** 00 1700 00 0,8 µf,0 11,0 13,0 B31-C18-+ *** 830 1300 00 1,0 µf,0 1,0 13,0 B31-C1-+ *** 80 10 00 33 nf,0 7,0 13,0 B31-C3333-+ *** 00 1700 00 7 nf,0 7,0 13,0 B31-C373-+ *** 00 1700 00 8 nf,0 7,0 13,0 B31-C383-+ *** 00 1700 00 0, µf,0 7,0 13,0 B31-C3-+ *** 00 1700 00 0,1 µf,0 9,0 13,0 B31-C31-+ *** 00 1700 00 0, µf,0 11,0 13,0 B31-C3-+ *** 830 1300 00 0,33 µf,0 11,0 13,0 B31-C333-+ *** 830 1300 00 0,7 µf,0 1,0 13,0 B31-C37-+ *** 80 10 00 nf,0 7,0 13,0 B31-C3-+ *** 00 1700 00 1 nf,0 7,0 13,0 B31-C13-+ *** 00 1700 00 nf,0 7,0 13,0 B31-C3-+ *** 00 1700 00 33 nf,0 9,0 13,0 B31-C333-+ *** 00 1700 00 7 nf,0 11,0 13,0 B31-C73-+ *** 830 1300 00 8 nf,0 11,0 13,0 B31-C83-+ *** 830 1300 00 0, µf,0 1,0 13,0 B31-C-+ *** 80 10 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B31-C7-K3 3 1/00

MKT B31 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack,8 nf ),0 9,0 13,0 B31-N88-+ *** 00 1700 00 nf ),0 9,0 13,0 B31-N83-+ *** 00 1700 00 1 nf ),0 11,0 13,0 B31-N813-+ *** 830 1300 00 nf ),0 11,0 13,0 B31-N83-+ *** 830 1300 00 33 nf ),0 1,0 13,0 B31-N8333-+ *** 80 10 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B31-N88-K3 ) Wound capacitor technology 1/00

B3 MKT 1 Ordering codes and packing units, lead spacing 1 mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,8 µf,0, 18,0 B3-C8-+ *** 1170 1300 00 1,0 µf,0, 18,0 B3-C-+ *** 1170 1300 00 1, µf,0, 18,0 B3-C1-+ *** 1170 1300 00, µf,0, 18,0 B3-C-+ *** 1170 1300 00 3,3 µf,0 11,0 18,0 B3-C33-+ *** 90 10 00,7 µf 7,0 1, 18,0 B3-C7-+ *** 830 900 00,8 µf 8, 1, 18,0 B3-C8-+ *** 80 700 00 µf 9,0 17, 18,0 B3-C-+ *** 0 700 00 0,33 µf,0, 18,0 B3-C133-+ *** 1170 1300 00 0,7 µf,0, 18,0 B3-C17-+ *** 1170 1300 00 0,8 µf,0, 18,0 B3-C18-+ *** 1170 1300 00 1,0 µf,0, 18,0 B3-C1-+ *** 1170 1300 00 1, µf,0 11,0 18,0 B3-C11-+ *** 90 10 00, µf 7,0 1, 18,0 B3-C1-+ *** 830 900 00 3,3 µf 8, 1, 18,0 B3-C133-+ *** 80 700 00,7 µf 9,0 17, 18,0 B3-C17-+ *** 0 700 00 0, µf,0, 18,0 B3-C3-+ *** 1170 1300 00 0,1 µf,0, 18,0 B3-C31-+ *** 1170 1300 00 0, µf,0, 18,0 B3-C3-+ *** 1170 1300 00 0,33 µf,0, 18,0 B3-C333-+ *** 1170 1300 00 0,7 µf,0 11,0 18,0 B3-C37-+ *** 90 10 00 0,8 µf 7,0 1, 18,0 B3-C38-+ *** 830 900 00 1,0 µf 8, 1, 18,0 B3-C3-+ *** 80 700 00 1,0 µf ) 8, 1, 18,0 B3-N3-+ *** 80 700 00 1, µf 9,0 17, 18,0 B3-C31-+ *** 0 700 00 1, µf ) 9,0 17, 18,0 B3-N31-+ *** 0 700 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-C8-K3 ) Wound capacitor technology 1/00

MKT B3 1 Ordering codes and packing units, lead spacing 1 mm V R (, 0 Hz) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 7 nf,0, 18,0 B3-C73-+ *** 1170 1300 00 8 nf,0, 18,0 B3-C83-+ *** 1170 1300 00 0, µf,0, 18,0 B3-C-+ *** 1170 1300 00 0, µf ),0, 18,0 B3-N-+ *** 1170 1300 00 0,1 µf,0 11,0 18,0 B3-C1-+ *** 90 10 00 0,1 µf ),0, 18,0 B3-N1-+ *** 1170 1300 00 0, µf 7,0 1, 18,0 B3-C-+ *** 830 900 00 0, µf ),0 11,0 18,0 B3-N-+ *** 90 10 00 0,33 µf 8, 1, 18,0 B3-C33-+ *** 80 700 00 0,33 µf ) 8, 1, 18,0 B3-N33-+ *** 80 700 00 0,7 µf ) 8, 1, 18,0 B3-N7-+ *** 80 700 00 0,8 µf ) 9,0 17, 18,0 B3-N8-+ *** 0 700 00 33 nf ),0, 18,0 B3-Q8333-+ *** 1170 1300 00 7 nf ),0, 18,0 B3-Q873-+ *** 1170 1300 00 8 nf ),0 11,0 18,0 B3-Q883-+ *** 90 10 00 0, µf ) 7,0 1, 18,0 B3-Q8-+ *** 830 900 00 0,1 µf ) 8, 1, 18,0 B3-Q81-+ *** 80 700 00 0, µf ) 9,0 17, 18,0 B3-Q8-+ *** 0 700 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-C73-K3 ) Wound capacitor technology 1/00

B33 MKT, Ordering codes and packing units, lead spacing, mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 3,3 µf,0 1,0, B33-Q33-+ *** 80 700 70,7 µf 7,0 1,0, B33-Q7-+ *** 80 00 30,8 µf 8, 1,, B33-Q8-+ *** 80 00 µf, 18,, B33-Q-+ *** 390 00 0 1, µf,0 1,0, B33-Q11-+ *** 80 700 70, µf,0 1,0, B33-Q1-+ *** 80 700 70 3,3 µf,0 1,0, B33-Q133-+ *** 80 700 70,7 µf 7,0 1,0, B33-Q17-+ *** 80 00 30,8 µf 8, 1,, B33-Q18-+ *** 80 00 0,7 µf,0 1,0, B33-Q37-+ *** 80 700 70 0,8 µf,0 1,0, B33-Q38-+ *** 80 700 70 1,0 µf,0 1,0, B33-Q3-+ *** 80 700 70 1, µf 7,0 1,0, B33-Q31-+ *** 80 00 30, µf, 1,, B33-Q3-+ *** 390 00 0 3,3 µf 11,0 0,, B33-Q333-+ *** 370 30 0, µf,0 1,0, B33-Q-+ *** 80 700 70 0,33 µf,0 1,0, B33-Q33-+ *** 80 700 70 0,7 µf 7,0 1,0, B33-Q7-+ *** 80 00 30 0,8 µf 8, 1,, B33-Q8-+ *** 80 00 1,0 µf, 1,, B33-Q-+ *** 390 00 0 0, µf,0 1,0, B33-Q8-+ *** 80 700 70 0,1 µf,0 1,0, B33-Q81-+ *** 80 700 70 0, µf 7,0 1,0, B33-Q8-+ *** 80 00 30 0,33 µf, 1,, B33-Q833-+ *** 390 00 0 0,7 µf, 0,, B33-Q87-+ *** 390 00 0 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B33-Q8-K3 7 1/00

MKT B3 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) 30 Vdc (0 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped,7 µf 11,0 1,0 31, B3-Q17-+ *** 30 30,8 µf 11,0 1,0 31, B3-Q18-+ *** 30 30 µf 11,0 1,0 31, B3-Q1-+ *** 30 30 1 µf 1, 1, 31, B3-Q11-+ *** 300 80 µf 1,0, 31, B3-Q1-+ *** 0 0 33 µf 18,0 7, 31, B3-Q133-+ *** 00 1, µf 11,0 1,0 31, B3-Q31-+ *** 30 30, µf 11,0 1,0 31, B3-Q3-+ *** 30 30 3,3 µf 11,0 1,0 31, B3-Q333-+ *** 30 30,7 µf 11,0 1,0 31, B3-Q37-+ *** 30 30,8 µf 1,0, 31, B3-Q38-+ *** 0 0 µf 18,0 7, 31, B3-Q3-+ *** 00 1,0 µf 11,0 1,0 31, B3-Q-+ *** 30 30 1, µf 11,0 1,0 31, B3-Q1-+ *** 30 30, µf 1, 1, 31, B3-Q-+ *** 300 80 3,3 µf 1,0, 31, B3-Q33-+ *** 0,7 µf 18,0 7, 31, B3-Q7-+ *** 00 0,33 µf 11,0 1,0 31, B3-Q833-+ *** 30 30 0,7 µf 11,0 1,0 31, B3-Q87-+ *** 30 30 0,8 µf 11,0 1,0 31, B3-Q88-+ *** 30 30 1,0 µf 1,0, 31, B3-Q8-+ *** 0 0 1, µf 18,0 7, 31, B3-Q81-+ *** 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-Q18-K3 8 1/00

B30 B 3 9 MKT Technical data C Climatic category /0/ in accordance with IEC 008-1 Lower category temperature T min Upper category temperature T max + 0 C (+ 1 C or 00 h and V C = 0, V R ) Damp heat test days/0 C/93 % relative humidity Limit values ater damp Capacitance change C/C % heat test Dissipation actor change tan δ 3 (at 1 khz) Insulation resistance R is 0 % o minimum or time constant τ = C R R is as-delivered values Reliability: Reerence conditions Failure rate Service lie Failure criteria: Total ailure Failure due to variation o parameters DC test voltage 0, V R ; 0 C 1 9 /h = 1 it For a conversion table or other operating conditions and temperatures, reer to chapter Quality assurance, page 37. 00 000 h Short circuit or open circuit Capacitance change C/C > % Dissipation actor tan δ > upper limit value Insulation resistance R is < 10 MΩ (C R 0,33 µf) or time constant τ = C R R is < 0 s (C R > 0,33 µf) 1, V R, s Category voltage V C Operation with dc voltage or ac voltage up to 0 Hz Operating voltage or short operating periods Dissipation actor tan δ (in 3 ) at 0 C (upper limit values) Insulation resistance R is or time constant τ = C R R is at 0 C, rel. humidity % (minimum as-delivered values) T 8 C V C = 1,0 V R V C,rms = 1,0 T 0 C V C = 0,8 V R V C,rms = 0,8 T 8 C V = 1, V C, max. 000 h V = 1,0 V C,rms, max. 000 h T 0 C V = 1, V C, max. 000 h V = 1,0 V C,rms, max. 000 h T 1 C V = 0, V R, max. 00 h V = 0,, max. 00 h C R 0,1 µf 0,1 µf < C R 1 µf C R > 1 µf at 1 khz 8 khz 1 0 0 khz 30 V R C R 0,33 µf C R > 0,33 µf 0 Vdc 370 MΩ 10 s 0 Vdc 700 MΩ 00 s 9 1/00

MKT B 3 9 B 3 9 Impedance Z versus requency (typical values) Pulse handling capability Maximum permissible voltage change per unit o time or non-sinusoidal voltages (pulse, sawtooth) V R Max. rate o voltage rise V pp /τ in V/µs (or V pp = V R ) Lead spacing mm 7, mm mm 1) 1 mm 1), mm 1) 7, mm 1) 0 Vdc 00 3 Vdc 0 10 0 30 (3) 0 Vdc 300 10 7 0 () (3) 0 Vdc 00 00 10 0 () () (,) 00 Vdc 00 7 17 1 (0) () (7,) 30 Vdc 800 (0) () (1) (1) For V pp < V R, the permissible voltage rise rate value V pp /τ may be multiplied by the actor V R /V pp. Also reer to the calculation example in chapter General technical inormation, page 30. V R Pulse characteristic k 0 in V /µs (or V pp V R ) Lead spacing mm 7, mm mm 1) 1 mm 1), mm 1) 7, mm 1) 0 Vdc 0 000 3 Vdc 30 000 1 000 300 3 800 (37) 0 Vdc 0 000 30 000 1 000 000 (70) (00) 0 Vdc 00 000 0 000 7 000 0 000 ( 000) (3 000) ( 0) 00 Vdc 00 000 0 000 10 000 0 000 (1 000) (8 000) ( 000) 30 Vdc 1 000 000 ( 000) (30 000) (18 000) (1 000) 1) Values in brackets apply to wound capacitors 30 1/00

B39 MKT Permissible ac voltage versus requency Lead spacing mm 0 Vdc/ 3 3 Vdc/ 0 0 Vdc/ 3 0 Vdc/ 10 00 00 KMK0071-7 00 00 KMK0717-K 0 0 0 0 0 0 0 1,0 nf 3,3 nf nf 0,1 µf 0,7 µf 1,0 µf 0 1,0 nf,8 nf 7 nf 0,7 µf 1 3 Hz 1 3 Hz 31 1/00

MKT B39 Permissible ac voltage versus requency Lead spacing mm 00 Vdc/ 00 30 Vdc/ 00 00 V ac KMK070-W 00 0 0 1 nf,7 nf nf 3 Hz 3 1/00

B30 MKT 7, Permissible ac voltage versus requency Lead spacing 7, mm 3 Vdc/ 0 0 Vdc/ 3 00 00 0 0 0 0 KMK03-H 7 µf 0, µf 0,8 µf 1,0 µf 1 3 Hz 0 Vdc/ 10 00 Vdc/ 00 00 V ac KMK070-N 00 0 0 1 nf 1 nf 8 nf 3 Hz 33 1/00

MKT B31 Permissible ac voltage versus requency Lead spacing mm 3 Vdc/ 0 0 Vdc/ 3 0 Vdc/ 10 00 Vdc/ 00 3 1/00

B31 MKT Permissible ac voltage versus requency Lead spacing mm 30 Vdc/ 00 3 1/00

MKT B3 1 Permissible ac voltage versus requency Lead spacing 1 mm 3 Vdc/ 0 0 Vdc/ 3 00 V 00 rms KMK088-W 00 V 00 rms KMK089-0 0 0 0 0 0 0 0 0,8 µf, µf,7 µf µf 0,33 µf 1,0 µf 3,3 µf,7 µf 1 3 Hz 1 3 Hz 0 Vdc/ 10 00 Vdc/ 00 00 V 00 rms 0 0 0 KMK090-8 0 0,1 µf 0,33 µf 1,0 µf 1, µf 1 3 Hz 3 1/00

B3 MKT 1 Permissible ac voltage versus requency Lead spacing 1 mm 30 Vdc/ 00 00 V 00 rms KMK087-N 0 0 0 0 33 nf 8 nf 0,1 µf 0, µf 1 3 Hz 37 1/00

MKT B33, Permissible ac voltage versus requency Lead spacing, mm 3 Vdc/ 0 0 Vdc/ 3 00 00 0 0 0 0 KMK0-Q 3,3 µf,8 µf µf 1 3 Hz 0 Vdc/ 10 00 Vdc/ 00 00 V 00 rms 0 0 0 0 KMK08-F 0, µf 0,8 µf 1,0 µf 1 3 Hz 38 1/00

B33 MKT, Permissible ac voltage versus requency Lead spacing, mm 30 Vdc/ 00 00 V 00 rms KMK08-7 0 0 0 0 0,1 µf 0, µf 0,7 µf 1 3 Hz 39 1/00

MKT B3 7, Permissible ac voltage versus requency Lead spacing 7, mm 0 Vdc/ 3 0 Vdc/ 10 00 V 00 rms KMK0-Y 00 00 KMK0-7 0 0 0 0 0 0 0 0,7 µf 1 µf 33 µf 1, µf 3,3 µf µf 1 3 Hz 1 1 3 Hz 00 Vdc/ 00 30 Vdc/ 0 0 1/00

Herausgegeben von EPCOS AG Marketing Kommunikation, Postach 80 17 09, 8117 München, DEUTSCHLAND EPCOS AG 000. Alle Rechte vorbehalten. Vervielältigung, Veröentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente speziiziert, keine Eigenschaten zugesichert. Bestellungen unterliegen den vom ZVEI empohlenen Allgemeinen Lieerbedingungen ür Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaten im Ausland. Bauelemente können augrund technischer Erordernisse Geahrstoe enthalten. Auskünte darüber bitten wir unter Angabe des betreenden Typs ebenalls über die zuständige Vertriebsgesellschat einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 8117 Munich, GERMANY EPCOS AG 000. All Rights Reserved. Reproduction, publication and dissemination o this brochure and the inormation contained therein without EPCOS prior express consent is prohibited. The inormation contained in this brochure describes the type o component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions or the Supply o Products and Services o the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manuacturers Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Oices o EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For inormation on the type in question please also contact one o our Sales Oices. 1