AVX SMD Power Inductors
|
|
- Παναγιώτης Οικονόμου
- 7 χρόνια πριν
- Προβολές:
Transcript
1 AVX SMD Power Inductors Version 14.7
2 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: μh Rated Current: A LMXN Series Non-Shielded Style C 4-7 Inductance Range: μh Rated Current: A LMXN Series Non-Shielded Style D 8-11 Inductance Range: μh Rated Current: A LMax SMD Shielded Power Inductor LMXS Series Shielded Style B Inductance Range: ,800 μh Rated Current: A LMXS Series Shielded Style C Inductance Range: ,500 μh Rated Current: A LMXS Series Shielded Style D Inductance Range: ,000 μh Rated Current: A LMXS Series Shielded Style F Inductance Range: 1.2-1,500 μh Rated Current: A LMXS Series Shielded Style G Inductance Range: 10-1,000 μh Rated Current: A LMXS Series Shielded Style H Inductance Range: 2.4-1,000 μh Rated Current: A LMXS Series Shielded Style J Inductance Range: ,000 μh Rated Current: A LMXS Series Shielded Style L Inductance Range: μh Rated Current: A LMXS Series Shielded Style M Inductance Range: μh Rated Current: A LMXS Series Shielded Style P Inductance Range: μh Rated Current: A LMax SMD Miniature Power Inductor LMMN Series Miniature Style M Inductance Range: ,000 μh Rated Current: A LMax Low Profile Power Inductor LMLP Series Style C Inductance Range: μh Rated Current: A LMLP Series Style D Inductance Range: μh Rated Current: A NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications. 1
3 LMXN Series Non-Shielded Style B FEATURES Miniature surface mount design High power, High saturation inductors Very low resistance Maximum power density Ideal inductors for DC DC converters Available on tape and reel for auto surface mounting APPLICATIONS Notebook Computers Handheld Communications LCD Televisions Power Supply For VTRs DC/DC Converters, etc. CHARACTERISTICS Saturation Rated Current:The current when the inductance becomes 30% lower than its initial value. (Ta=25 C) Operating temperature range: -40 ~ 85 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 22.0μH 7.7 ~ 0.70A μH ~ 100μH 7.7 ~ 0.53A μH ~ 100μH 11.4 ~ 0.95A μH ~ 100μH 25.1 ~ 1.80A μH ~ 470μH 30.0 ~ 0.8A Electrical specifications at 25 C DIMENSIONS A I J I C 100 PAD 4R7 E B LAYOUT D H mm (inches) Type A max. B max. C max. D E H I J (0.295) (0.205) (0.126) (0.181) (0.098) (0.157) (0.079) (0.157) (0.350) (0.252) (0.197) (0.230) (0.103) (0.160) (0.079) (0.200) (0.560) (0.390) (0.250) (0.374) (0.177) (0.256) (0.091) (0.344) (0.764) (0.524) (0.268) (0.500) (0.260) (0.315) (0.150) (0.460) (0.880) (0.604) (0.315) (0.630) (0.315) (0.340) (0.169) (0.565) HOW TO ORDER LM XN 0705 M R04 B T A S Family LM = Power Inductor Series XN = Non-Shielded Size 0705 = 7x5xh (h = see catalog) M = ±20% P = +40% 20% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 2
4 LMXN Series Non-Shielded Style B ELECTRICAL CHARACTERISTICS 0705/0906/1310/1913/2216 Codes DCR (Ω) max. I sat (A) max* L Test (μh) 705 Condition R P P 100KHz, 0.1V R M 100KHz, 0.1V R M 100KHz, 0.1V R0 1.0 M P 100KHz, 0.1V R5 1.5 M M P 100KHz, 0.1V R2 2.2 M M M 100KHz, 0.1V R3 3.3 M M M 100KHz, 0.1V R9 3.9 M 100KHz, 0.1V R7 4.7 M M M 100KHz, 0.1V R0 6.0 M 100KHz, 0.1V R8 6.8 M M M 100KHz, 0.1V R8 7.8 M 100KHz, 0.1V M M M 100KHz, 0.1V M M M 100KHz, 0.1V M M M 100KHz, 0.1V M M 100KHz, 0.1V M M 100KHz, 0.1V M M 100KHz, 0.1V M M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V *Saturation Current:The current when the inductance becomes 30% lower than its initial value. (Ta=25 C) 3
5 LMXN Series Non-Shielded Style C FEATURES High power, High saturation inductors Ideal inductors for DC-DC converters in notebook computers, PDAs, Step-up or step-down converters, flash memory programmers, etc has ceramic base with gold-plating Others have LCP plastic base APPLICATIONS Portable Telephones Personal Computers DC/DC Converters Various Electronic Appliances CHARACTERISTICS Saturation Rated Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25 C) Operating temperature range: -40 ~ 125 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 1000μH 2.9 ~ 0.10A μH ~ 1000μH 4.2 ~ 0.29A 13E9 1.0μH ~ 1000μH 9.0 ~ 0.30A 13L9 0.47μH ~ 1000μH 40 ~ 0.8A μH ~ 1000μH 20 ~ 1.0A Electrical specifications at 25 C DIMENSIONS A 4R7 B C EPOXY D E J F I H mm (inches) Type A max. B max. C max. D E F H I J (0.260) (0.175) (0.115) (0.170) (0.050) (0.040) (0.140) (0.055) (0.160) (0.510) (0.370) (0.118) (0.300) (0.100) (0.100) (0.110) (0.115) (0.290) 13E (0.510) (0.370) (0.205) (0.300) (0.100) (0.100) (0.110) (0.115) (0.290) 13L (0.510) (0.370) (0.450) (0.300) (0.100) (0.100) (0.110) (0.115) (0.290) (0.730) (0.600) (0.280) (0.500) (0.100) (0.100) (0.110) (0.115) (0.490) 4
6 LMXN Series Non-Shielded Style C HOW TO ORDER LM XN 1309 M R04 C T A S Family LM = Power Inductor Series XN = Non-shielded Size 1309 = 13x9xh 13E9 = 13x9xE(h) (h = see catalog) M = ±20% N = ±30% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel ELECTRICAL CHARACTERISTICS Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* 1R0 1.0 M 100KHz, 0.1V R5 1.5 M 100KHz, 0.1V R2 2.2 M 100KHz, 0.1V R3 3.3 M 100KHz, 0.1V R7 4.7 M 100KHz, 0.1V R8 6.8 M 100KHz, 0.1V R2 8.2 M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* 4R7 4.7 M 100KHz, 0.1V R8 6.8 M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25 C) 5
7 LMXN Series Non-Shielded Style C 13E9 13L9 Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* 1R0 1.0 M 100KHz, 0.1V R5 1.5 M 100KHz, 0.1V R2 2.2 M 100KHz, 0.1V R3 3.3 M 100KHz, 0.1V R7 4.7 M 100KHz, 0.1V R8 6.8 M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* R N 100KHz, 0.1V R N 100KHz, 0.1V R2 1.2 N 100KHz, 0.1V R5 1.5 N 100KHz, 0.1V R2 2.2 N 100KHz, 0.1V R5 3.5 N 100KHz, 0.1V R7 4.7 N 100KHz, 0.1V R6 5.6 N 100KHz, 0.1V R8 6.8 N 100KHz, 0.1V R2 8.2 N 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25 C) 6
8 Non-Shielded Style C 1915 Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* 1R0 1.0 M 100KHz, 0.1V R2 2.2 M 100KHz, 0.1V R3 3.3 M 100KHz, 0.1V R6 5.6 M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25 C) 7
9 LMXN Series Non-Shielded Style D FEATURES Open Magnetic Circuit Construction Small Surface Area APPLICATIONS LCD Televisions Notebooks Portable Communication DC/DC Converters, etc. CHARACTERISTICS Rated Current (IDC): The DC current that will cause an approximate ΔT of 40 C. (Ta=25 C) Operating temperature range: -40 C ~ +125 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 33 μh 3.30 ~ 0.56A μH ~ 220 μh 1.44 ~ 0.35A μH ~ 330 μh 1.44 ~ 0.28A 08G8 10.0μH ~ 470 μh 2.30 ~ 0.34A μH ~ 560 μh 2.38 ~ 0.32A 10F9 10.0μH ~ 820 μh 2.6 ~ 0.24A Electrical specifications at 25 C DIMENSIONS SILVER F G A C D E R1.0 Land Part of Silk Scrren B Type A B C D E F G ± ± ± (0.177 ±.012) (0.158 ± 0.012) (0.126 ± 0.012) (0.197) (0.059) (0.069) (0.177) ± ± ± (0.228 ±.012) (0.205 ± 0.012) (0.177 ± 0.014) (0.236) (0.067) (0.085) (0.217) ± ± ± (0.307 ±.012) (0.276 ± 0.012) (0.140 ± 0.020) (0.315) (0.079) (0.118) (0.295) 08G ± ± ± (0.307 ±.012) (0.287 ± 0.012) (0.200 ± 0.020) (0.315) (0.079) (0.118) (0.295) ± ± ± (0.394 ±.012) (0.354 ± 0.012) (0.158 ± 0.020) (0.394) (0.098) (0.148) (0.374) 10F ± ± ± (0.394 ±.016) (0.354 ± 0.016) (0.213 ± 0.016) (0.394) (0.098) (0.148) (0.374) mm (inches) HOW TO ORDER LM XN 1009 M R04 D T A S Family LM = Power Inductor Series XN = Non-shielded Size 1009 = 10x9xh 10F9 = 10x9xF(h) (h = see catalog) M = ±20% Inductance 1R0 = 1.00μH 390 = 39.00μH 391 = 390.0μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 8
10 LMXN Series Non-Shielded Style D ELECTRICAL CHARACTERISTICS Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 1R0 1.0 M 100KHz, 1.0V R4 1.4 M 100KHz, 1.0V R8 1.8 M 100KHz, 1.0V R2 2.2 M 100KHz, 1.0V R7 2.7 M 100KHz, 1.0V R3 3.3 M 100KHz, 1.0V R9 3.9 M 100KHz, 1.0V R7 4.7 M 100KHz, 1.0V R6 5.6 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V R2 8.2 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V
11 LMXN Series Non-Shielded Style D G8 Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V
12 LMXN Series Non-Shielded Style D F9 Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V
13 LMXS Series Shielded Style B FEATURES Directly connected electrode on ferrite core Excellent property with high saturation for surface mounting APPLICATIONS OA Equipment Notebook PCs LCD Monitor Portable Terminal Equipment DC/DC Converters, etc. Power Supply for VTR CHARACTERISTICS Rated DC Current: The current when the inductance becomes 30% lower than its initial value. Operating temperature: -40 ~ 85 C INDUCTANCE AND RATED CURRENT RANGES 04B ~ 2200μH 1.84 ~ 0.035A 04C4 1.0 ~ 6800μH 1.90 ~ 0.017A 04A4 1.0 ~ 100μH 1.50 ~ 0.100A ~ 820μH 2.33 ~ 0.030A 05C ~ 2500μH 4.82 ~ 0.045A ~ 3300μH 4.70 ~ 0.026A Electrical specifications at 25 C DIMENSIONS A C E D G J K B H mm (inches) Type A B C max. D E G H K J 04B ± ± ± (0.152 ± 0.012) (0.152 ± 0.012) (0.079) (0.154 ± 0.008) (0.063) (0.126) (0.075) (0.118) (0.179) 04C ± ± ± (0.152 ± 0.012) (0.152 ± 0.012) (0.118) (0.154 ± 0.008) (0.063) (0.126) (0.075) (0.118) (0.179) 04A ± ± max (0.152 ± 0.012) (0.152 ± 0.012) (0.059) (0.189 max.) (0.063) (0.118) (0.079) (0.102) (0.205) max max ± (0.207 max.) (0.207 max.) (0.079) (0.224 ± 0.016) (0.063) (0.165) (0.075) (0.154) (0.224) 05C max max ± (0.207 max.) (0.207 max.) (0.118) (0.224 ± 0.016) (0.063) (0.165) (0.075) (0.154) (0.224) ± ± ± (0.232 ± 0.008) (0.232 ± 0.008) (0.118) (0.252 ± 0.012) (0.094) (0.185) (0.106) (0.173) (0.256) HOW TO ORDER LM XS 0505 M R04 B T A S Family LM = Power Inductor Series XS = Shielded Size 0505 = 5x5xh 05A5 = 5x5xA(h) (h = see catalog) M = ±20% N = ±30% P = ±40% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 12 12
14 LMXS Series Shielded Style B ELECTRICAL CHARACTERISTICS 04B4/04C4 Codes L Test DCR (Ω) max. I sat (A) max* (μh) Condition 04B4 04C4 04B4 04C4 R N 100 KHz, 0.25V R0 1.0 N 100 KHz, 0.25V R2 1.2 N 100 KHz, 0.25V R5 1.5 N 100 KHz, 0.25V R8 1.8 N 100 KHz, 0.25V R0 2.0 N 100 KHz, 0.25V R2 2.2 N 100 KHz, 0.25V R4 2.4 N 100 KHz, 0.25V R5 2.5 N 100 KHz, 0.25V R7 2.7 N 100 KHz, 0.25V R3 3.3 N 100 KHz, 0.25V R5 3.5 N 100 KHz, 0.25V R9 3.9 N 100 KHz, 0.25V R7 4.7 N 100 KHz, 0.25V R6 5.6 N 100 KHz, 0.25V R2 6.2 N 100 KHz, 0.25V R8 6.8 N 100 KHz, 0.25V R2 8.2 N 100 KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 13
15 LMXS Series Shielded Style B 04A4 Codes L (μh) Test Condition DCR (Ω) max. I sat (A) max* 1R0 1.0 N 100KHz, 0.1V R2 1.2 N 100KHz, 0.1V R2 2.2 N 100KHz, 0.1V R3 3.3 N 100KHz, 0.1V R9 3.9 N 100KHz, 0.1V R7 4.7 N 100KHz, 0.1V R6 5.6 N 100KHz, 0.1V R8 6.8 N 100KHz, 0.1V R2 8.2 N 100KHz, 0.1V N 100KHz, 0.1V N 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 14
16 LMXS Series Shielded Style B 0505/05C5/0606 Codes L Test DCR (Ω) max. I sat (A) max* (μh) Condition C C R N 100KHz, 0.25V R0 1.0 N 100KHz, 0.25V R1 1.1 N 100KHz, 0.25V R2 1.2 N 100KHz, 0.25V R5 1.5 N 100KHz, 0.25V R8 1.8 N 100KHz, 0.25V R0 2.0 N 100KHz, 0.25V R2 2.2 N 100KHz, 0.25V R4 2.4 N 100KHz, 0.25V R7 2.7 N 100KHz, 0.25V R3 3.3 N 100KHz, 0.25V R9 3.9 N 100KHz, 0.25V R1 4.1 N 100KHz, 0.25V R7 4.7 N 100KHz, 0.25V R6 5.6 N 100KHz, 0.25V R8 6.8 N 100KHz, 0.25V R2 8.2 N 100KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 15
17 LMXS Series Shielded Style C FEATURES Directly connected electrode on ferrite core Available in magnetically shielded Low DC resistance Suitable for large current Available on tape and reel for auto surface mounting APPLICATIONS Power Supply For VTRs OA Equipment. Notebook PCs Portable Communication Equipment DC/DC Converters, etc. INDUCTANCE AND RATED CURRENT RANGES ~ 180μH 1.60 ~ 0.110A 04B ~ 1800μH 1.84 ~ 0.036A 04C4 1.5 ~ 560μH 1.90 ~ 0.090A ~ 1000μH 1.77 ~ 0.067A 05B5 1.0 ~ 820μH 2.70 ~ 0.026A 05C5 1.0 ~ 2500μH 4.00 ~ 0.045A ~ 820μH 3.28 ~ 0.100A 07B7 1.0 ~ 1500μH 3.52 ~ 0.095A 07D ~ 1000μH 9.24 ~ 0.180A Electrical specifications at 25 C CHARACTERISTICS Rated Current: 0404/04B4/0505/05B5/05C5/0707/07B7/07D7: The DC current when the inductance becomes 30% lower than its initial value. 04C4/101B/101D/101H: The DC current when the inductance becomes 35% lowers than its initial value. (Ta=25 C) Operating temperature range: -40 ~ +105 C DIMENSIONS A C H øc B D PCB Pattern K J mm (inches) Type A B C max. D H J K øc ± ± (0.150 ± 0.012) (0.150 ± 0.012) (0.049) (0.047) (0.173) (0.173) (0.043) (0.118) 04B ± ± (0.150 ± 0.012) (0.150 ± 0.012) (0.079) (0.047) (0.173) (0.173) (0.043) (0.118) 04C ± ± (0.150 ± 0.012) (0.150 ± 0.012) (0.118) (0.047) (0.173) (0.173) (0.043) (0.118) ± ± (0.197 ± 0.012) (0.197 ± 0.012) (0.047) (0.079) (0.232) (0.232) (0.075) (0.165) 05B ± ± (0.197 ± 0.012) (0.197 ± 0.012) (0.079) (0.079) (0.232) (0.232) (0.075) (0.165) 05C ± ± (0.197 ± 0.012) (0.197 ± 0.012) (0.118) (0.079) (0.232) (0.232) (0.075) (0.165) ± ± (0.272 ± 0.012) (0.272 ± 0.012) (0.059) (0.098) (0.287) (0.287) (0.079) (0.209) 07B ± ± (0.272 ± 0.012) (0.272 ± 0.012) (0.075) (0.098) (0.287) (0.287) (0.079) (0.209) 07D ± ± (0.276 ± 0.016) (0.276 ± 0.016) (0.169) (0.071) (0.315) (0.315) (0.063) (0.236) 16
18 LMXS Series Shielded Style C HOW TO ORDER LM XS 0707 M R04 C T A S Family LM = Power Inductor Series XS = Shielded ELECTRICAL CHARACTERISTICS 0404/04B4/04C4 Size 0707 = 7x7xh 07D7 = 7x7xD(h) (h = see catalog) M = ±20% N = ±30% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Packaging S = 13" Reel Codes L Test DCR (Ω) max. I sat (A) max* (μh) Condition B4 04C B4 04C4 R N 100KHz, 0.25V R0 1.0 M, N 100KHz, 0.25V R2 1.2 M, N 100KHz, 0.25V R5 1.5 M, N 100KHz, 0.25V R8 1.8 M, N 100KHz, 0.25V R2 2.2 M, N 100KHz, 0.25V R4 2.4 M, N 100KHz, 0.25V R5 2.5 M, N 100KHz, 0.25V R7 2.7 M, N 100KHz, 0.25V R3 3.3 M, N 100KHz, 0.25V R5 3.5 M, N 100KHz, 0.25V R6 3.6 M, N 100KHz, 0.25V R9 3.9 M, N 100KHz, 0.25V R3 4.3 M, N 100KHz, 0.25V R7 4.7 M, N 100KHz, 0.25V R1 5.1 M, N 100KHz, 0.25V R6 5.6 M, N 100KHz, 0.25V R2 6.2 M, N 100KHz, 0.25V R8 6.8 M, N 100KHz, 0.25V R5 7.5 M, N 100KHz, 0.25V R2 8.2 M, N 100KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V *Saturation Current (0404/04B4): The DC current when the inductance becomes 30% lower than its initial value. (Ta=25 C) *Saturation Current (04C4): The DC current when the inductance becomes 35% lowers than its initial value. (Ta=25 C) Style Termination T = Sn Plate Special A = Standard 17
19 LMXS Series Shielded Style C 0505/05B5/05C5 Codes L Test DCR (Ω) max. I sat (A) max* (μh) Condition B5 05C B5 05C5 1R0 1.0 M, N 100KHz, 0.25V R1 1.1 M, N 100KHz, 0.25V R2 1.2 M, N 100KHz, 0.25V R5 1.5 M, N 100KHz, 0.25V R0 2.0 M, N 100KHz, 0.25V R2 2.2 M, N 100KHz, 0.25V R3 3.3 M, N 100KHz, 0.25V R5 3.5 M, N 100KHz, 0.25V R1 4.1 M, N 100KHz, 0.25V R7 4.7 M, N 100KHz, 0.25V R6 5.6 M, N 100KHz, 0.25V R2 6.2 M, N 100KHz, 0.25V R8 6.8 M, N 100KHz, 0.25V R2 8.2 M, N 100KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V *Saturation Current (0505/05B5/05C5): The DC current when the inductance becomes 30% lower than its initial value. 18
20 LMXS Series Shielded Style C 0707/07B7/07D7 Codes L Test DCR (Ω) max. I sat (A) max* (μh) Condition B7 07D B7 07D7 R N 100KHz, 0.25V R N 100KHz, 0.25V R N 100KHz, 0.25V R0 1.0 M, N 100KHz, 0.25V R2 1.2 M, N 100KHz, 0.25V R5 1.5 M, N 100KHz, 0.25V R8 1.8 M, N 100KHz, 0.25V R0 2.0 M, N 100KHz, 0.25V R2 2.2 M, N 100KHz, 0.25V R5 2.5 M, N 100KHz, 0.25V R7 2.7 M, N 100KHz, 0.25V R0 3.0 M, N 100KHz, 0.25V R3 3.3 M, N 100KHz, 0.25V R9 3.9 M, N 100KHz, 0.25V R3 4.3 M, N 100KHz, 0.25V R7 4.7 M, N 100KHz, 0.25V R6 5.6 M, N 100KHz, 0.25V R8 6.8 M, N 100KHz, 0.25V R2 8.2 M, N 100KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V M 1KHz, 0.25V *Saturation Current (0707/07B7/07D7): The DC current when the inductance becomes 30% lower than its initial value. 19
21 LMXS Series Shielded Style D FEATURES Magnetically shielded against radiation 0704 can help achieve longer battery life significantly in handheld communication devices / 1915 designed for the higher current requirements of portable computers hasceramic base with gold plating 1309 / 1915 has LCP plastic base APPLICATIONS Portable Telephones Personal Computers Other Various Electronic Appliances DC/DC Converters, etc. CHARACTERISTICS Saturation Rated Current (IDC): The DC current when the inductance becomes 10% lower than its initial value. (Ta=25 C) Temperature Rise Current (I rms): The actual current when temperature of coil becomes Δ40 C. (Ta=25 C) Operating temperature range: -40 ~ 85 C INDUCTANCE AND RATED CURRENT RANGES ~ 10000μH 3.0 ~ 0.02A ~ 1000μH 5.0 ~ 0.17A ~ 1000μH 3.9 ~ 0.53A Electrical specifications at 25 C DIMENSIONS 680 EPOXY D F I J E H Type A max. B max. C max. D E F H I J (0.260) (0.175) (0.115) (0.170) (0.050) (0.040) (0.140) (0.055) (0.160) (0.510) (0.370) (0.205) (0.300) (0.100) (0.100) (0.110) (0.115) (0.290) (0.730) (0.600) (0.300) (0.500) (0.100) (0.100) (0.110) (0.115) (0.490) HOW TO ORDER mm (inches) LM XS 0704 M R04 D T A S Family LM = Power Inductor Series XS = Shielded Size 0704 = 7x4xh 1309 = 13x9xh (h = see catalog) M = ±20% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 20
22 LMXS Series Shielded Style D ELECTRICAL CHARACTERISTICS 0704 Codes L Test Condition DCR SRF ref Q min. I rms (μh) L Q (Ω) max. (MHz) (A) max. 1R0 1.0 M 100KHz, 0.1V 200KHz, 0.1V R5 1.5 M 100KHz, 0.1V 200KHz, 0.1V R2 2.2 M 100KHz, 0.1V 200KHz, 0.1V R3 3.3 M 100KHz, 0.1V 200KHz, 0.1V R7 4.7 M 100KHz, 0.1V 200KHz, 0.1V R8 6.8 M 100KHz, 0.1V 200KHz, 0.1V M 100KHz, 0.1V 200KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V M 100KHz, 0.1V 100KHz, 0.1V Codes L Test DCR SRF ref IDC I rms (μh) Condition (Ω) max. (MHz) (A) max (A) max. 1R0 1.0 M 100KHz, 0.1V R5 1.5 M 100KHz, 0.1V R2 2.2 M 100KHz, 0.1V R3 3.3 M 100KHz, 0.1V R7 4.7 M 100KHz, 0.1V R8 6.8 M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V
23 LMXS Series Shielded Style D 1915 Codes L Test DCR SRF ref IDC I rms (μh) Condition (Ω) max. (MHz) (A) max. (A) max M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V M 100KHz, 0.1V
24 LMXS Series Shielded Style F FEATURES Magnetically Shielded Construction Large Current Low DCR APPLICATIONS Telephones PCs Notebooks Hard Disk Drives Peripherals DIMENSIONS A CHARACTERISTICS Rated Current (IDC): The DC current that will cause an approximate ΔT of 40 C. (Ta=25 C) Operating temperature range: -40 C ~ +125 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 100.0μH 1.50 ~ 0.33A 06C6 4.7μH ~ 100.0μH 1.60 ~ 0.42A μH ~ 47.0μH 1.60 ~ 0.54A 07C7 3.3μH ~ μH 1.90 ~ 0.13A 07E7 3.3μH ~ μH 2.30 ~ 0.14A μH ~ μH 2.50 ~ 0.22A μH ~ μH 3.60 ~ 0.29A 131H 2.0μH ~ 220.0μH 6.20 ~ 1.00A 131J 1.2μH ~ 220.0μH 8.20 ~ 1.30A Electrical specifications at 25 C C D G H 4R7 B E I EPOXY 0.1 typ. Type A B C D E F G H I ± ± ± ± typ 1.50 typ (0.236 ± 0.008) (0.236 ± 0.008) (0.099 ± 0.008) (0.079 ± 0.004) (0.118 typ) (0.059 typ) (0.087) (0.079) (0.103) 06C ± ± ± ± typ 1.50 typ (0.236 ± 0.008) (0.236 ± 0.008) (0.110 ± 0.008) (0.079 ± 0.004) (0.118 typ) (0.059 typ) (0.087) (0.079) (0.103) ± ± ± ± typ 1.50 typ (0.276 ± 0.008) (0.276 ± 0.008) (0.110 ± 0.008) (0.079 ± 0.004) (0.193 typ) (0.059 typ) (0.087) (0.079) (0.103) 07C ± ± ± ± typ 1.50 typ (0.276 ± 0.008) (0.276 ± 0.008) (0.126 ± 0.008) (0.079 ± 0.004) (0.193 typ) (0.059 typ) (0.087) (0.079) (0.142) 07E ± ± ± ± typ 1.50 typ (0.276 ± 0.008) (0.276 ± 0.008) (0.177 ± 0.012) (0.079 ± 0.004) (0.193 typ) (0.059 typ) (0.087) (0.079) (0.142) ± ± ± ± ± ± (0.398 ± 0.012) (0.398 ± 0.012) (0.177 ± 0.012) ± 0.004) (0.236 ± 0.008) (0.079 ± 0.006) (0.126) (0.099) (0.220) ± ± ± ± ± ± (0.492 ± 0.012) (0.492 ± 0.012) (0.217 ± 0.012) ± 0.004) ± 0.012) (0.079 ± 0.006) (0.126) (0.099) (0.322) 131H 12.5 ± ± ± ± ± ± (0.492 ± 0.012) (0.492 ± 0.012) (0.256 ± 0.014) ± 0.004) ± 0.012) (0.079 ± 0.006) (0.126) (0.099) (0.322) 131J 12.5 ± ± ± ± ± ± (0.492 ± 0.012) (0.492 ± 0.012) (0.295 ± 0.014) ± 0.004) ± 0.012) (0.079 ± 0.006) (0.126) (0.099) (0.322) HOW TO ORDER LM XS 0707 M 2R2 F T F A H S mm (inches) Family LM = Power Inductor Series XS = Shielded Size 0707 = 7x7xh 07C7 = 7x7xC(h) (h = see catalog) M = ±20% Inductance 2R2 = 2.20μH 680 = 68.0μH 152 = 1500μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 23
25 LMXS Series Shielded Style F ELECTRICALCHARACTERISTICS C C7 Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 4R7 4.7 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 4R7 4.7 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 3R3 3.3 M 100KHz, 1.0V R7 4.7 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L(μH) TestCondition DCR(Ω)max. IDC(A)max. 3R3 3.3 M 100KHz, 1.0V R7 4.7 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V
26 LMXS Series Shielded Style F 07E Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 3R3 3.3 M 100KHz, 1.0V R7 4.7 M 100KHz, 1.0V R8 6.8 M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 6R0 6 M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V
27 LMXS Series Shielded Style F 131H 131J Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 2R0 2.0 M 100KHz,1.0V R2 4.2 M 100KHz,1.0V R0 7.0 M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max. 1R2 1.2 M 100KHz,1.0V R7 2.7 M 100KHz,1.0V R9 3.9 M 100KHz,1.0V R6 5.6 M 100KHz,1.0V R8 6.8 M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V M 100KHz,1.0V
28 LMXS Series Shielded Style G FEATURES Magnetically Shielded Construction Large Current Low DCR APPLICATIONS LCD Televisions Notebooks Handheld Communication DC/DC Converters, etc. CHARACTERISTICS Rated Current (IDC): The DC current that will cause an approximate ΔT of 40 C. (Ta=25 C) Operating temperature range: -40 C ~ +125 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 1000μH 1.68 ~ 0.16A 07D7 10μH ~ 1000μH 1.84 ~ 0.18A Electrical specifications at 25 C DIMENSIONS D H I A Max F C Max G J B Max E Solder Mask K mm (inches) Type A max. B max. C max. D E F G H I J K (0.295) (0.295) (0.138) (0.079) (0.043) (0.200) (0.248) (0.118) (0.075) (0.177) (0.413) 07D (0.295) (0.295) (0.177) (0.079) (0.043) (0.200) (0.248) (0.118) (0.075) (0.177) (0.413) HOW TO ORDER LM XS 0707 M R04 G T A S Family LM = Power Inductor Series XS = Shielded Size 0707 = 7x7xh 07C7 = 7x7xC(h) (h = see catalog) M = ±20% Inductance 3R9 = 3.900μH 390 = 39.00μH 391 = 390μH 102 = 1000μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 27
29 LMXS Series Shielded Style G ELECTRICAL CHARACTERISTICS D7 Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V Codes L (μh) Test Condition DCR (Ω) max. IDC (A) max M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V M 100KHz, 1.0V
30 LMXS Series Shielded Style H FEATURES Magnetically Shielded Construction Large Current Low DCR APPLICATIONS LCD Televisions Notebooks Handheld Communication DC/DC Converters, etc. CHARACTERISTICS Rated Current (IDC): The DC Current that will cause a drop in inductance value of approximately 20%. Operating temperature range: -40 C ~ +125 C INDUCTANCE AND RATED CURRENT RANGES μH ~ 330μH 6.5 ~ 0.50A 121G 2.4μH ~ 47μH 8.0 ~ 2.5A 121J 10μH ~ 1000μH 4.0 ~ 0.40A Electrical specifications at 25 C DIMENSIONS D H I C Max A Max F G J B Max E Solder Mask K mm (inches) Type A max. B max. C max. D E F G H I J K (0.492) (0.492) (0.177) (0.197) (0.079) (0.299) (0.393) (0.236) (0.118) (0.276) (0.709) 121G (0.492) (0.492) (0.244) (0.197) (0.079) (0.299) (0.394) (0.236) (0.118) (0.276) (0.709) 121J (0.492) (0.492) (0.315) (0.197) (0.079) (0.299) (0.394) (0.236) (0.118) (0.276) (0.709) HOW TO ORDER LM XS 1212 M R04 H T A S Family LM = Power Inductor Series XS = Shielded Size 1212 = 12x12xh 121G = 12x12xG(h) (h = see catalog) M = ±20% Inductance 3R9 = 3.900μH 390 = 39.00μH 391 = 390μH 102 = 1000μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 29
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραSMD Shielded Power Inductor HPCRHF2D /3D /4D Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series Features: l SMD type power inductors by the electrode is attached to the ferrite core directly. l Magnetically shielded to prevent noise radiation. Applications:
Διαβάστε περισσότεραXIX INDUCTORS XXX XXX XXX. Shielded SMD Power Inductor ORDER INFORMATION FIG1: FIG2: FIG3: Dimensions( unit: mm)
Features *High power, High saturation inductors *With magnetically shielded against radiation *Directly connected electrode on ferrite core *Highly accurate dimensions for surface mounting Applications
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραSMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραSLD Series. SMD Type Shielded Power Inductors. Features. Applications. Lead Free Part Numbering. Dimensions
SMD Type Shielded Power Inductors Features 1. Magnetically shielded Version. 2. High inductance /High Power Inductor. 3. The products contain no lead and also support lead-free soldering. Pb Applications
Διαβάστε περισσότεραRoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραFEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Διαβάστε περισσότεραSCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically
Διαβάστε περισσότεραINDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραTODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
Διαβάστε περισσότεραQFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραLow Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Διαβάστε περισσότεραSunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Διαβάστε περισσότεραPower Inductor 125 CDRH Series
CDRH Series Features Magnetically shielded construction Storage temperature range: - ~+ Operating temperature range: - ~+ (including coil s self-heat) RoHS Compliance and Halogen Free Qualification to
Διαβάστε περισσότεραLow Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
Διαβάστε περισσότεραSMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραSunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραWIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Διαβάστε περισσότεραThermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραCal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραChip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Διαβάστε περισσότεραWire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραHigh Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραUnshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραSD Series High Power Density, Low Profile, Shielded Inductors
Description Six sizes of shielded drum core inductors with low profiles (as low as.mm) and high power density Inductance range from.47uh to uh Current range from 6. to 88 mps Ferrite shielded, low EMI
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραCoating Inductors (SPS/SPH/SPN Series)
Coating Inductors (SPS/SPH/SPN Series) Feature 1. Small and low profile inductor 2. It corresponds to high current 3. Simple and original magnetic shield structure Product Range Application For small DC/DC
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραSCL Series. Multilayer Chip Ferrite Inductor
Multilayer Chip Ferrite Inductor Features 1 Monolithic structure for high reliability 2 Compact size inductor possible 3 No cross coupling due to magnetic shield 4 Perfect shape for mounting with no directionality
Διαβάστε περισσότεραSPM R2 M P S A
Wire Wound s (SPM/SAM/SPS/SPH/SPN Series) Ordering Code Product Code: SPM: Molding Inductor-General SAM: Molding Inductor-Automotive SPM 2520 2R2 M P S A SPS : Metal Coating (Ultra high Current) SPN :
Διαβάστε περισσότεραHIGH CURRENT POWER INDUCTORS / AMPI ED Type Series
ARLITECH ELECTRONIC CORP. TEL:886-2-2999-8313 FAX:886-2-2995-7520 E-mail:sales@arlitech.com.tw HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series Features High performance realized by metal core Compact
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραHFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Διαβάστε περισσότεραMULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότερα