SCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
|
|
|
- Λάρισα Μιχαλολιάκος
- 7 χρόνια πριν
- Προβολές:
Transcript
1 Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically shielded Low resistance Suitable for large currents Ideal for a variety of - converter inductor applications. vailable on tape and reel for auto surface mounting. SHPS N IMNSIONS Unit: mm PROUT INTIFITION SS - Internal No. Tolerance Inductance T / R / L / HP imensions Product Symbol T = Tape and Reel, R = ore Style (Round), L = Low R, HP = High Power Internal No.: S = ase Type Terminals, N = Lead-Free SS62/64 SS73/74 XXX XXX SS124/125/127 F TYP F SS ± ± ± SS ± ± ± SS ± ± SS ± ± SS SS SS XXX
2 116 LTRIL HRTRISTIS STMP INUTN RSISTN (Ω) Max. RT URRNT () (µh) SS SS SS SS SS SS SS SS SS SS SS SS SS SS 62T 64T T 64T r r r r r r r r r r r , , ,390 1, ,900 1, ,180 1,680 1, ,770 1,870 1, ,120 2,080 1,650 1, ,380 2,370 2,310 1, ,940 2,670 2,620 1, ,940 2,940 2,
3 117 LTRIL HRTRISTIS STMP INUTN RSISTN (Ω) Max. RT URRNT () (µh) SS SS SS SS SS SS SS SS SS SS SS SS SS SS 62T 64T T 64T ,930 4,180 3, ,430 4,670 3, , ,320 5,730 4,630 1,200 1, ,240 6,540 5,200 1,340 1, ,000 9,260 9,440 6,000 1,530 1, Note: Test Freq.(L): SS62T: 3.3 to 8.2 µh (7.96MHz/1V), 10 to 82 µh (2.52MHz/1V), 100 to 330 µh (1KHz/1V) SS64T/73/74/125: (1KHz/1V); SS124: (100KHz/1V); SS127: 1.2 to 7.6 µh (100KHz/1V), 10 to 1,000 µh (1KHz/1V) Test Instrument: L- HP 4192 LF Impedance analyzer, R- H502, Rated urrent- HP or H1061+H301 Rated current: The rated current indicates the current when the inductance decrease to 65%. Over of it s nominal value or.. current when the temperature rising ΔT = 40 lower, whichever is lower. Tolerance: M = ± 20%, T = ± 30%, N = +40% / -20% TOLRN OF INUTORS SS62T 3.3 to 330 µh ± 20% SS to 330 µh ± 20% SS64T 10 to 1,000 µh ± 20% SS to 1,000 µh ± 20% SS73 10 to 1,000 µh ± 20% SS to 7.6 µh +40% / -20% SS74 10 to 1,000 µh ± 20% 10 to 1,000 µh ± 20%
4 118 TP IMNSIONS TP MTRIL P0 P2 K0 W P over Tape 160mm Min. lank Part hip Mounting Part lank 330mm Min. Leader RL IMNSIONS ROMMN PTTRN imensions: mm TYP TP ROMMN RL QUNTITY/ IMNSIONS PTTRN IMNSIONS RL K0 W P P0 P2 SS ,500 SS ,000 SS ,600 SS ,000 SS SS SS
5 Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs O quipment L Televisions Notebook Ps Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically shielded Low resistance Suitable for large currents Ideal for a variety of - converter inductor applications. vailable on tape and reel for auto surface mounting. PROUT INTIFITION SS - Internal No. Tolerance Inductance T / R / L / HP imensions Product Symbol T = Tape and Reel, R = ore Style (Round), L = Low R, HP = High Power Internal No.: S = ase Type Terminals, N = Lead-Free SHPS N IMNSIONS Unit: mm XXX G TYP F G SS104r SS105r F
6 120 LTRIL HRTRISTIS STMP INUTN RSISTN (Ω) Max. RT URRNT () (µh) SS104R SS105R SS104R SS105R r r r r r r r r r r r , , , , ,000 1, Note: Test Freq.(L): 100KHz/1V Test Instrument: L- HP 4192 LF Impedance analyzer, R- H502, Rated urrent- HP or H1061+H301 Rated current: The rated current indicates the current when the inductance decrease to 65%. Over of it s nominal value or.. current when the temperature rising ΔT = 40 lower, whichever is lower. Tolerance: M = ± 20%, T = ± 30%, N = +40% / -20% Tolerance of Inductors: SS104R: 1.5 to 330 µh ± 30%; SS105R: 0.8 to 1,000 µh ± 30%
7 121 TP IMNSIONS TP MTRIL P0 P2 K0 W P over Tape 160mm Min. lank Part hip Mounting Part lank 330mm Min. Leader RL IMNSIONS ROMMN PTTRN imensions: mm TYP TP ROMMN RL QUNTITY/ IMNSIONS PTTRN IMNSIONS RL K0 W P P0 P2 SS104r ,000 SS105r
8 Yageo corporation INUTORS / S SM Power Inductors SS Series PPLITIONS Power Supply for VTRs O quipment L Televisions Notebook Ps Portable ommunication quipment PROUT INTIFITION SS - SS N Internal No. Tolerance Inductance T / R / L / HP imensions Product Symbol Lead Free Internal No. Tolerance Inductance Packaging Style imensions Product Symbol - onverters, etc. FTURS vailable in magnetically shielded Low resistance Suitable for large currents Ideal for a variety of - converter inductor applications. vailable on tape and reel for auto surface mounting. T = Tape and Reel, R = ore Style (Round), L = Low R, HP = High Power Internal No.: S = ase Type Terminals, N = Lead-Free
9 123 SHPS N IMNSIONS Unit: mm Figure 1 Figure 2 Figure 3 XXX XXX G F F TYP FIGUR F G SS SS SS SS218L SS218HP SS SS311HP SS SS SS328L SS ± ± SS ± ± SS ± ± SS ± ± SS ± ± SS
10 124 LTRIL HRTRISTIS STMP INUTN RSISTN (Ω) Max. (µh) SS SS SS SS SS SS SS SS SS SS SS SS L 218H r r r r r r r r r r r r r r r r r r r r r r r r r r r r , , ,020 1, , , ,540 Note: Test Freq.(L): SS209/211/214/218LP/218HP/428: 100KHz/1V SS418: 1.0 to 8.2 µh (7.96MHz/1V), 10 to 39 µh (100KHz/1V) SS316: 100KHz/0.1V; SS518/528/628/638: 10KHz/1V Test Instrument: L- HP 4192 LF Impedance analyzer, R- H502, Rated urrent- HP or H1061+H301.. current when the temperature rising ΔT = 40 lower, whichever is lower. Tolerance: M = ± 20%, T = ± 30%, N = +40% / -20%
11 125 LTRIL HRTRISTIS STMP INUTN RT URRNT () (µh) SS SS SS SS SS SS SS SS SS SS SS SS L 218H r r r r r r r r r r r r r r r r r r r r r r r r r r r r
12 126 LTRIL HRTRISTIS STMP INUTN RT URRNT () (µh) SS SS SS SS SS SS SS SS SS SS SS SS L 218H Note: Test Freq.(L): SS209/211/214/218LP/218HP/428: 100KHz/1V SS418: 1.0 to 8.2 µh (7.96MHz/1V), 10 to 39 µh (100KHz/1V) SS316: 100KHz/0.1V; SS518/528/628/638: 10KHz/1V Test Instrument: L- HP 4192 LF Impedance analyzer, R- H502, Rated urrent- HP or H1061+H301.. current when the temperature rising ΔT = 40 lower, whichever is lower. Tolerance: M = ± 20%, T = ± 30%, N = +40% / -20% TOLRN OF INUTORS SS to 10 µh ± 30% SS to 47 µh ± 30% SS to 10 µh ± 30% SS328L 10 to 220 µh ± 30% SS to 12 µh ± 30% SS to 68 µh ± 30% SS218L 2.2 to 47 µh ± 30% SS to 180 µh ± 30% SS218HP 1.7 to 15 µh ± 30% SS to 100 µh ± 30% SS to 39 µh ± 30% SS to 100 µh ± 30% SS311HP 0.6 to 22 µh ± 30% SS to 100 µh ± 30% SS to 33 µh ± 30% SS to 100 µh ± 30%
13 127 LTRIL HRTRISTIS STMP INUTN RSISTN (Ω) Max. RT URRNT () Irms () Typ. (µh) SS SS SS SS SS SS SS SS SS SS SS SS HP L HP L HP L r r r r r r r r r Note: Test Freq.(L): 100KHz/1V Test Instrument: L- HP4284, R- H502, Rated urrent- HP or H1061+H301 Rated current: The rated current indicates the current when the inductance decreases to 65% Irms:.. current when the temperature rising ΔT = 40 Tolerance: T = ± 30%
14 128 TP IMNSIONS TP MTRIL arrier Tape: Polystyrene over Tape: Polyethylene P0 P2 K0 W P over Tape 160mm Min. lank Part hip Mounting Part lank 330mm Min. Leader RL IMNSIONS ROMMN PTTRN Figure 1 Figure 2 imensions: mm TYP TP ROMMN RL QUNTITY/ IMNSIONS PTTRN IMNSIONS RL K0 W P P0 P2 FIGUR SS ,000 SS ,000 SS ,000 SS218L ,000 SS218HP ,000 SS ,000 SS311HP ,000 SS ,000 SS SS328L SS ,000 SS ,000 SS ,000 SS ,000 SS ,500 SS ,000
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
AVX SMD Power Inductors
AVX SMD Power Inductors www.avx.com Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: 0.47-470 μh Rated Current: 0.53-30 A LMXN Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series Features: l SMD type power inductors by the electrode is attached to the ferrite core directly. l Magnetically shielded to prevent noise radiation. Applications:
Unshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
XIX INDUCTORS XXX XXX XXX. Shielded SMD Power Inductor ORDER INFORMATION FIG1: FIG2: FIG3: Dimensions( unit: mm)
Features *High power, High saturation inductors *With magnetically shielded against radiation *Directly connected electrode on ferrite core *Highly accurate dimensions for surface mounting Applications
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
SLD Series. SMD Type Shielded Power Inductors. Features. Applications. Lead Free Part Numbering. Dimensions
SMD Type Shielded Power Inductors Features 1. Magnetically shielded Version. 2. High inductance /High Power Inductor. 3. The products contain no lead and also support lead-free soldering. Pb Applications
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]](/thumbs/86/93358879.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
SB/NB/HF/GB/PB/UPB. SMD Chip Beads OUTLINE PRODUCT IDENTIFICATION SHAPES AND DIMENSIONS
Yageo corporation INDUCTORS / BEADS SMD Chip Beads SB/NB/HF/GB/PB/UPB OUTLINE Yageo offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of
SPM R2 M P S A
Wire Wound s (SPM/SAM/SPS/SPH/SPN Series) Ordering Code Product Code: SPM: Molding Inductor-General SAM: Molding Inductor-Automotive SPM 2520 2R2 M P S A SPS : Metal Coating (Ultra high Current) SPN :
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]](/thumbs/86/93359020.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
RoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
TODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing NT Thermistor SNT Series Temp. : -55 ~+25 TURS SM type suitable for high density mounting Series of constant for various applications xcellent solderability PPLTONS Telecommunication
DC-DC converter circuits for mobile phones, wearable devices, DVCs, HDDs, etc. MPH S R47 M T B01
Multilayer Chip Power Inductor MPH Series Operating emp. : -55 ~+25 FEAURES Higher DC bias current and lower DC resistance due to trench technology ow profile and thin thickness Monolithic structure for
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing NT Thermistor SNT Series Temp. : -55 ~+25 TURS SM type suitable for high density mounting Series of constant for various applications xcellent solderability PPLTONS Telecommunication
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
HFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Low Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Power Inductor 125 CDRH Series
CDRH Series Features Magnetically shielded construction Storage temperature range: - ~+ Operating temperature range: - ~+ (including coil s self-heat) RoHS Compliance and Halogen Free Qualification to
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing T Thermistor ST Series Temp. : -55 ~+25 TURS S type suitable for high density mounting Series of constant for various applications xcellent solderability PPTOS Telecommunication equipments
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
INDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
QFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
Wire Wound Chip Ceramic Inductor -SDWL-C-M Series Operating Temp. : -40 ~+125
Wire Wound hip eramic Inductor -SDWL--M Series Operating Temp. : -40 ~+25 EATURES Small chip suitable for surface mounting High Q value and high self-resonant frequency with ceramic material Tight inductance
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Ferrite Chip Inductor
FTURS SURFC MOUNT CS SIZS (0402 ~ 1206) DURL MULTILYR CONSTRUCTION MGNTICLLY SHILDD TP & RL PCKGING FOR UTOMTIC INSRTION OTH FLOW ND RFLOW SOLDRL Pb-FR/RoHS COMPLINT SPCIFICTIONS Case NFI04 NFI06 NFI08
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Polymer PTC Resettable Fuse: KRT Series
Polymer PT Resettable use: KRT Series Radial Lead Type or Telecom pplications eatures 1. RoHS & Halogen-ree (H) compliant 2. Hold current ratings from 0.08 to 0.18 3. High operating voltage rating :100Vdc/250Vdc
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Inductor. TCRC Radial Series Choke Inductor - / 扼流线圈电感器 of 07
TCRC Radial Series Choke Inductor - / 扼流线圈电感器 Features Open Magnetic circuit construction. Low cost and high reliability. Applications Notebook, Notebook, Inkjet printer, Copying machine, Display monitor,
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Thermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
High Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
SPECIFICATION OF CD SERIES
FEATURES 1. Open Magnetic circuit construction 2. Low cost and high reliability SPECIFICATION OF CD SERIES APPLICATIONS Notebook, Inkjet printer, Copying machine, ADSL modem, Cellular phone, Display monitor,
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Coating Inductors (SPS/SPH/SPN Series)
Coating Inductors (SPS/SPH/SPN Series) Feature 1. Small and low profile inductor 2. It corresponds to high current 3. Simple and original magnetic shield structure Product Range Application For small DC/DC
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Ferrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Product Selection Tables. 2005 SMD Resistors. Yageo brand
eo.com Product Selection Tables 2005 SMD Resistors Yageo brand Table of Contents www.yageo.com Table of contents Resistor chips, General purpose / Yageo brand 2 General purpose, 0201-0805 2 General purpose,
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication