HFC SERIES High Freq. Wound Ceramic Chip Inductors
|
|
|
- Ἄννα Μεσσηνέζης
- 6 χρόνια πριν
- Προβολές:
Transcript
1 FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as low profile. High quality factor. Material available for ceramic. Consisting of 5,,,, 32 sizes. APPLICATIONS The HFC chip inductors can be used in a variety of electronics, including. Cellular Phones, Portable Phones, Pagers, Cable Moderns, ADSL, Repeaters PRODUCT IDENTIFICATION HFC - 5C - NJ Product Code Dimensions Code Code Code Pattern Code PRODUCT SERIES NOTES: DIMENSION IN mm PART NO. A B C D E HFC-5C 1.0± ± ±0.1 0.Typ. 0.2±0.1 HFC-C 1.6± ± ±0.2 0.Typ. 0.±0.1 HFC-C HFC-C HFC-32C 2.0± ± ±0.2 1.±0.2 2.±0.2 2.± ± ± ±0.2 0.Typ. 0.70Typ. 1.Typ. 0.±0.1 0.±0.1 0.±0.1 LAND PATTERN NOTES: DIMENSION IN mm PART NO. F G H H HFC-5C HFC-C G HFC-C F HFC-C HFC-32C
2 95 HFC-5C-1N0 HFC-5C-1N8 HFC-5C-1N9 HFC-5C-2N0 HFC-5C-2N2 HFC-5C-2N4 HFC-5C-2N7 HFC-5C-3N3 HFC-5C-3N6 HFC-5C-3N9 HFC-5C-4N3 HFC-5C-4N7 HFC-5C-5N1 HFC-5C-5N6 HFC-5C-6N2 HFC-5C-6N8 HFC-5C-7N5 HFC-5C-8N2 HFC-5C-8N7 HFC-5C-9N0 HFC-5C-9N5 HFC-5C-N HFC-5C-11N HFC-5C-N HFC-5C-13N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-19N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-36N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-51N HFC-5C-N HFC-5C-N HFC-5C-N HFC-5C-R HFC-5C-R S.R.F
3 96 HFC-C-1N6 HFC-C-1N8 HFC-C-2N0 HFC-C-3N3 HFC-C-3N6 HFC-C-3N9 HFC-C-4N3 HFC-C-4N7 HFC-C-5N6 HFC-C-6N8 HFC-C-7N5 HFC-C-8N2 HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-72N HFC-C-N HFC-C-R HFC-C-R11 HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R S.R.F
4 HFC-C-2N2 HFC-C-2N7 HFC-C-3N3 HFC-C-3N9 HFC-C-4N7 HFC-C-5N1 HFC-C-5N6 HFC-C-6N8 HFC-C-8N2 HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R S.R.F
5 HFC-C-3N3 HFC-C-6N8 HFC-C-8N2 HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-N HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R HFC-C-R62 HFC-C-R HFC-C-R75 HFC-C-R HFC-C-R91 HFC-C-1R S.R.F
6 HFC-32C-4N7 HFC-32C-5N6 HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-N HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-R HFC-32C-1R0 HFC-32C-1R2 HFC-32C-1R5 HFC-32C-1R8 HFC-32C-2R S.R.F
QFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
SPECIFICATION OF CD SERIES
FEATURES 1. Open Magnetic circuit construction 2. Low cost and high reliability SPECIFICATION OF CD SERIES APPLICATIONS Notebook, Inkjet printer, Copying machine, ADSL modem, Cellular phone, Display monitor,
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Configurations: Dimension (mm) 0.60 ±0.03 IMCH ±0.1 IMCH ±0.2 IMCH IMCH ± IMCH ±0.
Multilayer Chip s for High Frequency Configurations: FEATURES To prevent EMI interference noises between. High Q and high reliability and ceramic. Monolithic inorganic material construction. Shapes and
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
High Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]](/thumbs/86/93358879.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Unshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]](/thumbs/86/93359020.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
SPM R2 M P S A
Wire Wound s (SPM/SAM/SPS/SPH/SPN Series) Ordering Code Product Code: SPM: Molding Inductor-General SAM: Molding Inductor-Automotive SPM 2520 2R2 M P S A SPS : Metal Coating (Ultra high Current) SPN :
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Wire Wound Chip Ceramic Inductor -SDWL-C-M Series Operating Temp. : -40 ~+125
Wire Wound hip eramic Inductor -SDWL--M Series Operating Temp. : -40 ~+25 EATURES Small chip suitable for surface mounting High Q value and high self-resonant frequency with ceramic material Tight inductance
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
TODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
SB/NB/HF/GB/PB/UPB. SMD Chip Beads OUTLINE PRODUCT IDENTIFICATION SHAPES AND DIMENSIONS
Yageo corporation INDUCTORS / BEADS SMD Chip Beads SB/NB/HF/GB/PB/UPB OUTLINE Yageo offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Inductor. TCRC Radial Series Choke Inductor - / 扼流线圈电感器 of 07
TCRC Radial Series Choke Inductor - / 扼流线圈电感器 Features Open Magnetic circuit construction. Low cost and high reliability. Applications Notebook, Notebook, Inkjet printer, Copying machine, Display monitor,
Ferrite Chip Bead(Lead Free)
Ferrite Chip Bead(Lead Free) YCM-Series 1.Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. 3. S.M.T. type. 4. Suitable for reflow soldering. 5. Shapes
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
SLD Series. SMD Type Shielded Power Inductors. Features. Applications. Lead Free Part Numbering. Dimensions
SMD Type Shielded Power Inductors Features 1. Magnetically shielded Version. 2. High inductance /High Power Inductor. 3. The products contain no lead and also support lead-free soldering. Pb Applications
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series Features: l SMD type power inductors by the electrode is attached to the ferrite core directly. l Magnetically shielded to prevent noise radiation. Applications:
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
FERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS)
FERRITES' NOTES RW MTERIL SPEIFITION (RMS) Property Unit Pratical Frequency Range MHz Initial Permeability urie Temperature Specific Gravity g/cm 3 Loss Factor @ FREQUENY -6 MHz Temp. oef. of Initial Permeability
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material ± ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoids crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Low Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material. D a b a 0.25 ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
INDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
High Voltage Ceramic Capacitor (Radial Disc Type)
High Voltage Ceramic Capacitor (Radial Disc Type) 1. Material Characteristics Series No TEMP. CHAR. Working Temperature ( ) Insulation Resistance ( MΩ) 1 UJ -25~+85 100000 2 SL -25~+85 100000 Disspation
Power Inductor 125 CDRH Series
CDRH Series Features Magnetically shielded construction Storage temperature range: - ~+ Operating temperature range: - ~+ (including coil s self-heat) RoHS Compliance and Halogen Free Qualification to
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip beads Chilisin offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of impedance
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
SCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series
ARLITECH ELECTRONIC CORP. TEL:886-2-2999-8313 FAX:886-2-2995-7520 E-mail:sales@arlitech.com.tw HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series Features High performance realized by metal core Compact
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Table of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
SPECIFICATIONS. PRODUCT NAME: AC COB15W LED module (3120) General Customer MODEL NAME: CUSTOMER P/N: DATE: 2015-09-10
SPECIFICATIONS PRODUCT NAME: AC COB5W LED module (320) CUSTOMER: General Customer MODEL NAME: CUSTOMER P/N: DATE: 205-09-0 APT Electronics Ltd. CUSTOMER Prepared by Checked by Approved by Approved by He
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Multilayer Ferrite Chip Beads / CM Series Feature Application Product Identification CM 1608 RL 120 Configurations & Dimensions Series Name Unit: mm
Feature. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6. Available
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
FEATURE Operating Temperature: -40 C ~ +125 C Storage Temperature: 15~28 C; Humidity < 80%RH Ceramic base provide high SRF Ultra-compact inductors provide high Q factors Low profile, high current are available
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
DC-DC converter circuits for mobile phones, wearable devices, DVCs, HDDs, etc. MPH S R47 M T B01
Multilayer Chip Power Inductor MPH Series Operating emp. : -55 ~+25 FEAURES Higher DC bias current and lower DC resistance due to trench technology ow profile and thin thickness Monolithic structure for
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291