Multilayer Ceramic Chip Capacitors (For General Electronic Equipment)
|
|
- Θήρα Γλυκύς
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Multilayer Ceramic Chip Capacitors ( Electronic Equipment) Series:ECJ Features Small size and wide capacitance range High humidity characteristics and long life Excellent solderability and resistance to soldering heat Low inductance (ESL) and excellent frequency characteristics Recommended Applications Class 1 (T.C. Type) Tuned circuits, and filter circuitry, where low loss and high stability of capacitance and high insulation resistance is required Class 2 (Hi-K Type) Coupling and By-passing Precautions for Handling See Page 51 to 57 Discontinued / Revise Part Numbers See Page 58 Packaging method See Page 48, 96 Explanation of Part Numbers E C J Z E B 1 A K (Example) Product!Packaging #Rated Voltage (ECJ: Multilayer Ceramic Styles Size " Temperature Chip Capacitors) Characteristics $Nominal % Construction! " # No Name 1 Ceramic dielectric 2 Internal electrode 3 Substrate electrode 4 Terminal Intermediate electrode 5 electrode External electrode Dimensions in mm (not to scale) L W T L1 L2 Unit : mm Size (EIA) L W T L1, L2 Z Type ± ± ± ± Type ± ± ± ±0.1 1 Type ± ± ± ± ±0.1 2 Type ± ± ± ± ± ± ± ± ±0.1 3 Type ± ± ± ± ± ± ± ±0.2
2 Packaging Styles and Standard Packaging Quantity Type 06 Type 10 Type 11 Type 12 Type 13 Packaging Styles Quantity (0201) (0402) (0603) (0805) (1206) T=0.3 T=0.5 T=0.8 T=0.6 T=0.85 T=1.25 T=0.6 T=0.85 T=1.15 T=1.6 E Paper taping (Pitch: 2 mm) 15,000 10,000 V Paper taping f180 (Pitch: 4 mm) 4,000 5,000 4,000 5,000 4,000 F reel Embossed taping pcs./ 3,000 3,000 Y (Pitch: 4 mm) reel 2,000 Paper taping W 50,000 f330 (Pitch: 2 mm) reel Z Paper taping 10,000 20,000 10,000 20,000 10,000 (Pitch: 4 mm) C Bulk case pcs./reel 50,000 15,000 10,000 For Part Number applicable to f330 reel, please contact us. Temperature Characteristics Class 1 Capacitors Temp. Coeff. <2 pf 3 pf >4 pf >10 pf C CD CK(0±250 ppm/ C) CJ(0±120 ppm/ C) CH(0±60 ppm/ C) CG(0±30 ppm/ C) G SL +350 to 1000 Note: Measurement of capacitance at 20 C and 85 C should be made to calculate temperature characteristic Rate of change at each Temperature (%) Temp. Coeff. (1) 25 C 85 C (ppm/ C) Max. Min. Max. Min. CG 0± CH 0± CJ 0± CK 0± SL +350 to (1) These temperature coefficient are calculated between 20 C and 85 C For applicable temperature characteristics, see the lists of standard products on page 16 to 23. Class 2 Capacitors Change Measurement Temperature Range Reference Temperature B ±10 % 25 to 85 C 20 C B X7R ±15 % 55 to 125 C 25 C X5R ±15 % 55 to 85 C 25 C F F +30, 80 % 25 to 85 C 20 C Y5V +22, 82 % 30 to 85 C 25 C For applicable temperature characteristics, see the lists of standard products on page 16 to 23. Rated Voltage 1H 1E 1C 1A 0J Rated Voltage DC 50 V DC 25 V DC 16 V DC 10 V DC 6.3 V Nominal Ex 0R Nominal 0.5 pf 1 pf 10 pf 100,000 pf (0.1µF) T: Thickness (mm) Not applicable to Type 06 Class Tol. C C < 5 pf ±0.25 D C <10 pf ±0.5 1 CD, SL F C =10 pf ±1 pf pf pf J C >10 pf ±5 % K ±10 % K ±10 % 2 B, X7R, X5R M ±20 % F, Y5V Z +80, 20 %
3 Specification and Test Method Item Operating Temperature Range Dielectric Withstanding Voltage Insulation Resistance (I R) Cpacitance Q Factor or Dissipation Factor (tan d) Temperature Characteristics C : 55 to 125 C 25 to 85 C (Type 13, 5600 to pf) SL : 55 to 125 C No breakdown Q: C<30 pf: Q>400+20C 30 pf<c<1000 pf:q>1000 tan d: C>1000 pf: tan d<0.002 (C:Nominal Cap. in pf) Specification Class 1 Class 2 CG: 0 ± 30 ppm/ C CH: 0 ± 60 ppm/ C CJ : 0 ± 120 ppm/ C CK: 0 ± 250 ppm/ C SL : +350 to 1000 ppm/ C B, X7R : 55 to 125 C B, X5R : 55 to 85 C F, Y5V : 30 to 85 C MΩ or 500/C (MΩ) whichever is less. Note:DC10V, DC6.3V:100/C(MΩ)min. (C:Nominal Cap. in µf) within the specified tolerance Standard condition : Temperature 15 to 35 C, Relative humidity 45 to 75 % tan d:0.2 max. Please confirmation to the technical reports for details. B : ±10 %( 25 to 85 C) X7R: ±15 %( 55 to 125 C) X5R: ±15 %( 55 to 85 C) F : +30, 80 %( 25 to 85 C) Y5V: +22, 82 %( 30 to 85 C) Test Method Test voltage: Class 1:Rated voltage 300 % Class 2:Rated voltage 250 % Duration:1 to 5s Charge/discharge current:within 50 ma Measuring voltage:rated voltage Duration: 60±5s Charge/discharge current:within 50 ma Reference temperature: 20±2 C Class 1: Nominal capacitance C < 1000 pf C > 1000 pf Measuring frequency 1 MHz ± 10% 1 khz ± 10% Measuring voltage 0.5 to 5 Vrms 0.5 to 5 Vrms Class 2: Pretreatment: The capacitors should be kept in a temperature of 150+0/ 10 C for 1 hour and stored in standard condition for 48 ± 4 hours, before initial measurement. Nominal capacitance C < 1 µf Measuring frequency 1 khz ± 10% Measuring voltage 1.0 ± 0.2 Vrms Maximum capacitance change at stage 1 to 5 (Unit: C) Stage C, SL B, F X7R X5R Y5V (Reference Temp.) ECJZEB0J104M(0210/X5R/6.3 V/0.1 µf) ECJ01B0J4741(0402/X5R/6.3 V/0.47 µf) of 0.50±0.05 Vrms measurement voltage.
4 Item Adhesion Specification Class 1 Class 2 The terminal electrode should be free from peeling or signs of peeling. Test Method Applied force: 2 N(Type 06 ) 5 N(Type 10, 11, 12 and 13 ) Arrow direction for 10 seconds. Test of Type 06 and R 0.3(Ò06ÓType) 0.5(Ò10ÓType) Sample 1.0 PC board Unit : mm Test of Type 11, 12 and 13 Sample Bending Strength change: Within ±5 % or ±0.5 pf whichever is larger. Appearance:no mechanical change: B, X7R, X5R : within ±12.5 % F,Y5V : within ±30 % Bending value:1 mm Bending speed:1 mm/s 20 R340 Bending Value Vibration Proof Solderability Resistance to Soldering Heat Temperature Cycle Appearance: There shall be no cracks and other mechanical. :Shall be within the specifiedtolerance Q.tand:initial value More than 95 % of the soldered area of both terminal electrodes should be covered with fresh solder. change: Within ±2.5 % or ±0.25 pf whichever is larger. Q.tan d:initial value IR:initial value Withstand voltage: no dielectric breakdown or change: Within ±2.5 % or ±0.25 pf whichever is larger. Q.tan d:initial value IR:initial value Withstand voltage: no dielectric breakdown or change: B, X7R, X5R : within ±7.5 % F, Y5V : within ±20 % tan d initial value IR:initial value Withstand voltage: no dielectric breakdown or change: B, X7R, X5R : within ±7.5 % F, Y5V : within ±20 % tan d initial value IR:initial value Withstand voltage: no dielectric breakdown or 45±2 45±2 Unit : mm Apply a variable vibration of 1.5mm total amplitude in the 10 to 55 to 10Hz vibration frequency range swept in 1 min. in 3 mutually perpendicular directions for 2 hours each, a total of 6 hours. Solder bath method Solder temperature:230±5 C Dipping period:4±1 s Solder:H63A (JIS Z 3282) Preconditioning:Heat treatment (150 C, 1h)/Class 2 Solder temperature:270±5 C Dipping period:3.0±0.5 s Preheat condition: Order Time(s) Temp. Type Type ( C) 06,10,11, to to to to to to 360 Recovery (Standard condition) Class 1:24±2 h Class 2:48±4 h Preconditioning:Heat treatment (150 C, 1h) /Class 2 Condition of one cycle Step 1:Minimum operation temp. 30±3 min. Step 2:Room temp. ± 3 min. Step 3:Maximum operation temp. 30±3 min. Step 4:Room temp. ± 3 min. Number of cycles:5 cycles Recovery (Standard condition) Class 1:24±2 h Class 2:48±4 h
5 Item Damp Heat (Steady state) Loading Under Damp Heat Specification Class 1 Class 2 change: Within ±5 % or ±0.5 pf whichever is larger. Q: C<10 pf:q>200+10c 10 pf<c<30 pf:q>275+5c/2 30 pf<c<1000 pf:q>350 tand C>1000 pf:tan d<0.004 (C:Nominal capacitance in pf) IR: 1000 MΩ or 50/C (MΩ) Whichever is less. (C:Nominal capacitance in µf) change: Within ±7.5 % or ±0.75 pf whichever is larger. Q: C<30 pf:q>100+10c/3 30 pf<c<1000 pf:q>200 tand C>1000 pf:tan d<0.004 (C:Nominal capacitance in pf) IR: 500 MΩ or 25/C (MΩ) Whichever is less. (C:Nominal capacitance in µf) change: B, X7R, X5R: Within ±12.5% Note:ECJ01B0J4741 (0402/X5R/6.3 V/0.47 µf), Within ±20% F, Y5V: Within ±30% tand 0.3 max. Please confirmation to the technical reports for details. IR: 1000 MΩ or 50/C (MΩ) Whichever is less. Note:DC10 V:10/C(MΩ) min. (C:Nominal capacitance in µf) change: B, X7R, X5R: Within ±12.5% Note:ECJ01B0J4741 (0402/X5R/6.3 V/0.47 µf), Within ±20% F, Y5V: Within ±30% tand 0.3 max. Please confirmation to the technical reports for details. IR: 500 MΩ or 25/C (MΩ) Whichever is less. Note:DC10 V:5/C(MΩ) min. (C:Nominal capacitance in µf) Test Method Preconditioning:Heat treatment (150 C, 1h)/Class 2 Temperature:40±2 C Relative humidity:90 to 95% Test period:500+24/0 h Recovery (Standard condition) Class 1:24±2 h Class 2:48±4 h Preconditioning:Voltage treatment (150 C, 1h)/Class 2 Temperature:40±2 C Relative humidity:90 to 95% Applied voltage:rated voltage Charge/discharge current: within 50mA Test period:500+24/0 h Recovery (Standard condition) Class 1:24±2 h Class 2:48±4 h
6 Item Loading at High Temperature Specification Class 1 Class 2 change: Within ±3 % or ±0.3 pf whichever is larger. Q: C<10 pf:q>200+10c 10 pf<c<30 pf:q>275+5c/2 30 pf<c<1000 pf:q>350 tan d C>1000 pf:tan d<0.004 (C:Nominal capcitance in pf) IR: 1000 MΩ or 50/C (MΩ) Whichever is less. (C:Nominal capacitance in µf) change: B, X7R, X5R: Within ±12.5% Note:ECJ01B0J4741 (0402/X5R/6.3 V/0.47 µf), Within ±20% F, Y5V: Within ±30% tan d 0.3 max. Please confirmation to the technical reports for details. IR: 1000 MΩ or 50/C (MΩ) Whichever is less. Note:DC10 V:10/C(MΩ) min. (C:Nominal capacitance in µf) Test Method Preconditioning:Voltage treatment /Class 2 Temperature: Maximum operation temp. ±3 C Applied voltage:rated voltage 200% Note:ECJZEB0J104M (0201/X5R/6.3 V/0.1 µf) ECJ01B0J4741 (0402/X5R/6.3 V/0.47 µf) :Rated voltage 100% Charge/discharge current:within 50mA Test period: /0 h Recovery (Standard condition) Class 1:24±2 h Class 2:48±4 h Note 1) Heat treatment:1 h of heat treatment at 150+0/ 10 C followed by 48±4 h recovery under the standard condition Note 2) Voltage treatment:1 h of voltage treatment under the specified temperature and voltage for testing followed by 48 ±4 h of recovery under the standard condition
7 Standard Products for Type 06 (EIA 0201 ), Taped Version Class 1 Rated voltage DC25V DC16V Part No 0.5 ±0.25pF(C) ECJZEC1E0R5C 0.3 L 1 ±0.25pF ECJZEC1E010@ 0.3 L 1.5 (C) ECJZEC1E1R5@0.3 L 2 or ECJZEC1E020@ 0.3 L 3 ±0.5pF ECJZEC1E030@ 0.3 L 4 (D) ECJZEC1E040@ 0.3 L 5 ECJZEC1E050@ 0.3 L 6 ECJZEC1E060D 0.3 L 7 ±0.5pF ECJZEC1E070D 0.3 L 8 (D) ECJZEC1E080D 0.3 L 9 ECJZEC1E090D 0.3 L ±0.5pF(D) 10 or ±1pF(F) ECJZEC1E100@ 0.3 L C T Char. (mm) CK CJ CH Part No T Char. (mm) CK CJ CH 12 ECJZEC1E120@ 0.3 L 15 ECJZEC1E150@ 0.3 L 18 ECJZEC1E180@ 0.3 L 22 ECJZEC1E220@ 0.3 L 27 ±5%(J) ECJZEC1E270@ 0.3 L 33 or ECJZEC1E330@ 0.3 L 39 ±10%(K) ECJZEC1C390@ 0.3 L 47 ECJZEC1C470@ 0.3 L 56 ECJZEC1C560@ 0.3 L 68 ECJZEC1C680@ 0.3 L 82 ECJZEC1C820@ 0.3 L 100 ECJZEC1C101@ 0.3 L Class 2 Rated voltage DC50V DC25V DC16V DC10V (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R 150 ECJZEB1H151@ 0.3 L L ECJZEB1E151@ 0.3 L L 220 ECJZEB1H221@ 0.3 L L ECJZEB1E221@ 0.3 L L 330 ECJZEB1H331@ 0.3 L L ECJZEB1E331@ 0.3 L L 470 ECJZEB1H471@ 0.3 L L ECJZEB1E471@ 0.3 L L 680 ±10%(K) ECJZEB1H681@ 0.3 L L ECJZEB1E681@ 0.3 L L 1000 ECJZEB1H102@ 0.3 L L ECJZEB1E102@ 0.3 L L or 1500 ECJZEB1E152@ 0.3 L L ECJZEB1C152@ 0.3 L L ±20%(M) 2200 ECJZEB1E222@ 0.3 L L ECJZEB1C222@ 0.3 L L 3300 ECJZEB1C332@ 0.3 L L ECJZEB1A332@ 0.3 L L 4700 ECJZEB1A472@ 0.3 L 6800 ECJZEB1A682@ 0.3 L ECJZEB1A103@ 0.3 L Rated voltage B DC6.3V (mm) B X7R X5R 4700 ECJZEB0J472@ 0.3 L ±10%(K) 6800 ECJZEB0J682@ 0.3 L or ECJZEB0J103@ 0.3 L ±20%(M) ECJZEB0J104M 0.3 L 1: tolerance. : 1 for K or M Packaging style code: E for taped version. (f180 reel, taping pitch: 2 mm) Recommend soldering method: Reflow soldering. B
8 Standard Products for Type 10 (EIA 0402 ), Taped Version Class 1 C G Rated voltage DC50V DC50V (mm) CK CJ CH CG (mm) SL 0.5 ±0.25pF(C) ECJ0EC1H0R5C 0.5 L ECJ0EG1H0R5C 0.5 L 1 ±0.25pF ECJ0EC1H010@ 0.5 L ECJ0EG1H010@ 0.5 L 1.5 (C) ECJ0EC1H1R5@ 0.5 L ECJ0EG1H1R5@ 0.5 L 2 or ECJ0EC1H020@ 0.5 L ECJ0EG1H020@ 0.5 L 3 ±0.5pF ECJ0EC1H030@ 0.5 L ECJ0EG1H030@ 0.5 L 4 (D) ECJ0EC1H040@ 0.5 L ECJ0EG1H040@ 0.5 L 5 ECJ0EC1H050@ 0.5 L ECJ0EG1H050@ 0.5 L 6 ECJ0EC1H060D 0.5 L ECJ0EG1H060D 0.5 L 7 ±0.5pF ECJ0EC1H070D 0.5 L ECJ0EG1H070D 0.5 L 8 (D) ECJ0EC1H080D 0.5 L ECJ0EG1H080D 0.5 L 9 ECJ0EC1H090D 0.5 L ECJ0EG1H090D 0.5 L ±0.5pF(D) 10 or ±1pF(F) ECJ0EC1H100@ 0.5 L L ECJ0EG1H100@ 0.5 L 12 ECJ0EC1H120@ 0.5 L L ECJ0EG1H120@ 0.5 L 15 ECJ0EC1H150@ 0.5 L L ECJ0EG1H150@ 0.5 L 18 ECJ0EC1H180@ 0.5 L L ECJ0EG1H180@ 0.5 L 22 ECJ0EC1H220@ 0.5 L L ECJ0EG1H220@ 0.5 L 27 ECJ0EC1H270@ 0.5 L L ECJ0EG1H270@ 0.5 L 33 ECJ0EC1H330@ 0.5 L L ECJ0EG1H330@ 0.5 L 39 ±5%(J) ECJ0EC1H390@ 0.5 L L ECJ0EG1H390@ 0.5 L 47 or ECJ0EC1H470@ 0.5 L L ECJ0EG1H470@ 0.5 L 56 ±10%(K) ECJ0EC1H560@ 0.5 L L ECJ0EG1H560@ 0.5 L 68 ECJ0EC1H680@ 0.5 L L ECJ0EG1H680@ 0.5 L 82 ECJ0EC1H820@ 0.5 L L ECJ0EG1H820@ 0.5 L 100 ECJ0EC1H101@ 0.5 L L ECJ0EG1H101@ 0.5 L 120 ECJ0EC1H121@ 0.5 L L ECJ0EG1H121@ 0.5 L 150 ECJ0EC1H151@ 0.5 L L ECJ0EG1H151@ 0.5 L 180 ECJ0EC1H181@ 0.5 L L ECJ0EG1H181@ 0.5 L 220 ECJ0EC1H221@ 0.5 L L ECJ0EG1H221@ 0.5 L 1: tolerance code. : 1 for K or M Packaging style code: E for taped version. (f180 reel, taping pitch: 2 mm) Recommend soldering method: Reflow soldering.
9 Standard Products for Type 10 (EIA 0402 ), Taped Version Class 2 Rated voltage DC50V DC25V DC16V DC10V DC6.3V (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R 100 ECJ0EB1H101@ 0.5 L L 120 ECJ0EB1H121K 0.5 L L 150 ECJ0EB1H151@ 0.5 L L 180 ECJ0EB1H181K 0.5 L L 220 ECJ0EB1H221@ 0.5 L L 270 ECJ0EB1H271K 0.5 L L 330 ECJ0EB1H331@ 0.5 L L 390 ECJ0EB1H391K 0.5 L L 470 ECJ0EB1H471@ 0.5 L L 560 ECJ0EB1H561K 0.5 L L 680 ECJ0EB1H681@ 0.5 L L 820 ECJ0EB1H821K 0.5 L L 1000 ECJ0EB1H102@ 0.5 L L 1200 ECJ0EB1H122K 0.5 L L 1500 ECJ0EB1H152@ 0.5 L L 1800 ECJ0EB1H182K 0.5 L L 2200 ECJ0EB1H222@ 0.5 L L 2700 ECJ0EB1H272K 0.5 L L 3300 ±10%(K) ECJ0EB1H332@ 0.5 L L 3900 or ECJ0EB1H392K 0.5 L L 4700 ±20%(M) ECJ0EB1E472@ 0.5 L L 5600 ECJ0EB1E562K 0.5 L L 6800 ECJ0EB1E682@ 0.5 L L 8200 ECJ0EB1E822K 0.5 L L ECJ0EB1E103@ 0.5 L L ECJ0EB1C103@ 0.5 L L ECJ0EB1C123K 0.5 L L ECJ0EB1C153@ 0.5 L L ECJ0EB1C183K 0.5 L L ECJ0EB1C223@ 0.5 L L ECJ0EB1A273K 0.5 L L ECJ0EB1A333@ 0.5 L L ECJ0EB1A393K 0.5 L L ECJ0EB1A473@ 0.5 L L ECJ0EB1A563K 0.5 L L ECJ0EB1A683@ 0.5 L L ECJ0EB1A823K 0.5 L L ECJ0EB1A104@ 0.5 L L ECJ0EB0J224@ 0.5 L ECJ0EB0J474@ 0.5 L Rated voltage DC50V DC25V DC16V DC10V (mm) F Y5V (mm) F Y5V (mm) F Y5V (mm) F Y5V 1000 ECJ0EF1H102Z 0.5 L L ECJ0EF1E102Z 0.5 L L 2200 ECJ0EF1H222Z 0.5 L L ECJ0EF1E222Z 0.5 L L 4700 ECJ0EF1H472Z 0.5 L L ECJ0EF1E472Z 0.5 L L , 20% ECJ0EF1H103Z 0.5 L L ECJ0EF1E103Z 0.5 L L (Z) ECJ0EF1E223Z 0.5 L L ECJ0EF1C223Z 0.5 L L ECJ0EF1C473Z 0.5 L L ECJ0EF1C104Z 0.5 L L ECJ0EF1A224Z 0.5 L L 1: tolerance code. : 1 for K or M Packaging style code: E for taped version. (f180 reel, taping pitch: 2 mm) Recommend soldering method: Reflow soldering. As for the capacitance value 1 µf above, please refer the page 8 and 9. F B
10 Standard Products for Type 11 (EIA 0603 ), Taped Version Class 1 C G Rated voltage DC50V DC50V (mm) CK CJ CH CG (mm) SL 0.5 ±0.25pF(C) ECJ1VC1H0R5C 0.8 L ECJ1VG1H0R5C 0.8 L 1 ±0.25pF ECJ1VC1H010@ 0.8 L ECJ1VG1H010@ 0.8 L 1.5 (C) ECJ1VC1H1R5@ 0.8 L ECJ1VG1H1R5@ 0.8 L 2 or ECJ1VC1H020@ 0.8 L ECJ1VG1H020@ 0.8 L 3 ±0.5pF ECJ1VC1H030@ 0.8 L ECJ1VG1H030@ 0.8 L 4 (D) ECJ1VC1H040@ 0.8 L ECJ1VG1H040@ 0.8 L 5 ECJ1VC1H050@ 0.8 L ECJ1VG1H050@ 0.8 L 6 ECJ1VC1H060D 0.8 L ECJ1VG1H060D 0.8 L 7 ±0.5pF ECJ1VC1H070D 0.8 L ECJ1VG1H070D 0.8 L 8 (D) ECJ1VC1H080D 0.8 L ECJ1VG1H080D 0.8 L 9 ECJ1VC1H090D 0.8 L ECJ1VG1H090D 0.8 L ±0.5pF(D) 10 or ±1pF(F) ECJ1VC1H100@ 0.8 L L ECJ1VG1H100@ 0.8 L 12 ECJ1VC1H120@ 0.8 L L ECJ1VG1H120@ 0.8 L 15 ECJ1VC1H150@ 0.8 L L ECJ1VG1H150@ 0.8 L 18 ECJ1VC1H180@ 0.8 L L ECJ1VG1H180@ 0.8 L 22 ECJ1VC1H220@ 0.8 L L ECJ1VG1H220@ 0.8 L 27 ECJ1VC1H270@ 0.8 L L ECJ1VG1H270@ 0.8 L 33 ECJ1VC1H330@ 0.8 L L ECJ1VG1H330@ 0.8 L 39 ±5%(J) ECJ1VC1H390@ 0.8 L L ECJ1VG1H390@ 0.8 L 47 or ECJ1VC1H470@ 0.8 L L ECJ1VG1H470@ 0.8 L 56 ±10%(K) ECJ1VC1H560@ 0.8 L L ECJ1VG1H560@ 0.8 L 68 ECJ1VC1H680@ 0.8 L L ECJ1VG1H680@ 0.8 L 82 ECJ1VC1H820@ 0.8 L L ECJ1VG1H820@ 0.8 L 100 ECJ1VC1H101@ 0.8 L L ECJ1VG1H101@ 0.8 L 120 ECJ1VC1H121@ 0.8 L L ECJ1VG1H121@ 0.8 L 150 ECJ1VC1H151@ 0.8 L L ECJ1VG1H151@ 0.8 L 180 ECJ1VC1H181@ 0.8 L L ECJ1VG1H181@ 0.8 L 220 ECJ1VC1H221@ 0.8 L L ECJ1VG1H221@ 0.8 L 270 ECJ1VC1H271@ 0.8 L L ECJ1VG1H271@ 0.8 L 330 ECJ1VC1H331@ 0.8 L L ECJ1VG1H331@ 0.8 L 390 ECJ1VC1H391@ 0.8 L L ECJ1VG1H391@ 0.8 L 470 ECJ1VC1H471@ 0.8 L L ECJ1VG1H471@ 0.8 L 560 ECJ1VC1H561@ 0.8 L L ECJ1VG1H561@ 0.8 L 680 ECJ1VC1H681@ 0.8 L L ECJ1VG1H681@ 0.8 L 820 ECJ1VC1H821@ 0.8 L L ECJ1VG1H821@ 0.8 L 1000 ECJ1VC1H102@ 0.8 L L ECJ1VG1H102@ 0.8 L 1: tolerance code. : 1 for K or M Packaging style code: V for taped version. (f 180 reel, taping pitch: 4 mm). Recommend soldering method: Reflow soldering.
11 Standard Products for Type 11 (EIA 0603 ), Taped Version Class ECJ1VB1H102@ 0.8 L L 1200 ECJ1VB1H122K 0.8 L L 1500 ECJ1VB1H152@ 0.8 L L 1800 ECJ1VB1H182K 0.8 L L 2200 ECJ1VB1H222@ 0.8 L L 2700 ECJ1VB1H272K 0.8 L L 3300 ECJ1VB1H332@ 0.8 L L 3900 ECJ1VB1H392K 0.8 L L 4700 ECJ1VB1H472@ 0.8 L L 5600 ECJ1VB1H562K 0.8 L L 6800 ECJ1VB1H682@ 0.8 L L 8200 ECJ1VB1H822K 0.8 L L ECJ1VB1H103@ 0.8 L L ECJ1VB1E103@ 0.8 L L ECJ1VB1C103@ 0.8 L L ±10%(K) ECJ1VB1H123K 0.8 L L ECJ1VB1E123K 0.8 L L ECJ1VB1C123K 0.8 L L ECJ1VB1H153@ 0.8 L L ECJ1VB1E153@ 0.8 L L ECJ1VB1C153@ 0.8 L L or ECJ1VB1H183K 0.8 L L ECJ1VB1E183K 0.8 L L ECJ1VB1C183K 0.8 L L ±20%(M) ECJ1VB1H223@ 0.8 L L ECJ1VB1E223@ 0.8 L L ECJ1VB1C223@ 0.8 L L ECJ1VB1H273K 0.8 L L ECJ1VB1E273K 0.8 L L ECJ1VB1C273K 0.8 L L ECJ1VB1H333@ 0.8 L L ECJ1VB1E333@ 0.8 L L ECJ1VB1C333@ 0.8 L L ECJ1VB1H393K 0.8 L L ECJ1VB1E393K 0.8 L L ECJ1VB1C393K 0.8 L L ECJ1VB1H473@ 0.8 L L ECJ1VB1E473@ 0.8 L L ECJ1VB1C473@ 0.8 L L ECJ1VB1E563K 0.8 L L ECJ1VB1C563K 0.8 L L ECJ1VB1E683@ 0.8 L L ECJ1VB1C683@ 0.8 L L ECJ1VB1E823K 0.8 L L ECJ1VB1C823K 0.8 L L ECJ1VB1H104@ 0.8 L L ECJ1VB1E104@ 0.8 L L ECJ1VB1C104@ 0.8 L L Rated voltage DC50V DC25V DC16V DC10V DC6.3V (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R ECJ1VB1A154@ 0.8 L L ECJ1VB1A224@ 0.8 L L ECJ1VB1A334@ 0.8 L ECJ1VB1A474@ 0.8 L ECJ1VB0J474@ 0.8 L L ECJ1VB1A684@ 0.8 L ECJ1VB0J684@ 0.8 L L F Rated voltage DC50V DC25V DC16V (mm) F Y5V (mm) F Y5V (mm) F Y5V ECJ1VF1H103Z 0.8 L L ECJ1VF1H223Z 0.8 L L , 20% ECJ1VF1H473Z 0.8 L L (Z) ECJ1VF1H104Z 0.8 L L ECJ1VF1E104Z 0.8 L L ECJ1VF1C104Z 0.8 L L ECJ1VF1C224Z 0.8 L L ECJ1VF1C474Z 0.8 L L 1: tolerance code. : 1 for K or M Packaging style code: V for taped version. (f 180 reel, taping pitch: 4 mm) Recommend soldering method: Reflow soldering. As for the capacitance value 1 µf above, please refer the page 8 and 9 B
12 Standard Products for Type 12 (EIA 0805 ), Taped Version Class 1 C G Rated voltage DC50V DC50V (mm) CH CG (mm) SL 27 ECJ2VC1H270@ 0.6 L L ECJ2VG1H270@ 0.6 L 33 ECJ2VC1H330@ 0.6 L L ECJ2VG1H330@ 0.6 L 39 ECJ2VC1H390@ 0.6 L L ECJ2VG1H390@ 0.6 L 47 ECJ2VC1H470@ 0.6 L L ECJ2VG1H470@ 0.6 L 56 ECJ2VC1H560@ 0.6 L L ECJ2VG1H560@ 0.6 L 68 ECJ2VC1H680@ 0.6 L L ECJ2VG1H680@ 0.6 L 82 ECJ2VC1H820@ 0.6 L L ECJ2VG1H820@ 0.6 L 100 ECJ2VC1H101@ 0.6 L L ECJ2VG1H101@ 0.6 L 120 ECJ2VC1H121@ 0.6 L L ECJ2VG1H121@ 0.6 L 150 ECJ2VC1H151@ 0.6 L L ECJ2VG1H151@ 0.6 L 180 ECJ2VC1H181@ 0.6 L L ECJ2VG1H181@ 0.6 L 220 ±5%(J) ECJ2VC1H221@ 0.6 L L ECJ2VG1H221@ 0.6 L 270 or ECJ2VC1H271@ 0.6 L L ECJ2VG1H271@ 0.6 L 330 ±10%(K) ECJ2VC1H331@ 0.6 L L ECJ2VG1H331@ 0.6 L 390 ECJ2VC1H391@ 0.6 L L ECJ2VG1H391@ 0.6 L 470 ECJ2VC1H471@ 0.6 L L ECJ2VG1H471@ 0.6 L 560 ECJ2VC1H561@ 0.6 L L ECJ2VG1H561@ 0.6 L 680 ECJ2VC1H681@ 0.6 L L ECJ2VG1H681@ 0.6 L 820 ECJ2VC1H821@ 0.6 L L ECJ2VG1H821@ 0.6 L 1000 ECJ2VC1H102@ 0.6 L L ECJ2VG1H102@ 0.6 L 1200 ECJ2VC1H122@ 0.6 L ECJ2VG1H122@ 0.6 L 1500 ECJ2VC1H152@ 0.6 L ECJ2VG1H152@ 0.6 L 1800 ECJ2VC1H182@ 0.6 L ECJ2VG1H182@ 0.6 L 2200 ECJ2VC1H222@ 0.6 L ECJ2VG1H222@ 0.6 L 2700 ECJ2VC1H272@ 0.85 L ECJ2VG1H272@ 0.6 L 1: tolerance code. : 1 for K or M Packaging style code: V for taped version. (f 180 reel, taping pitch: 4 mm) Recommend soldering method: Reflow soldering.
13 Standard Products for Type 12 (EIA 0805 ), Taped Version class 2 Rated voltage DC50V DC25V DC16V DC10V Part No T Char. Part No T Char. Part No T Char. Char. Part No T (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R 1000 ECJ2VB1H102@ 0.6 LL 1200 ECJ2VB1H122K 0.6 LL 1500 ECJ2VB1H152@ 0.6 LL 1800 ECJ2VB1H182K 0.6 LL 2200 ECJ2VB1H222@ 0.6 LL 2700 ECJ2VB1H272K 0.6 LL 3300 ECJ2VB1H332@ 0.6 LL 3900 ECJ2VB1H392K 0.6 LL 4700 ECJ2VB1H472@ 0.6 LL 5600 ECJ2VB1H562K 0.6 LL 6800 ECJ2VB1H682@ 0.6 LL 8200 ECJ2VB1H822K 0.6 LL ECJ2VB1H103@ 0.6 LL ±10%(K) ECJ2VB1H123K 0.6 LL ECJ2VB1H153@ 0.6 LL or ECJ2VB1H183K 0.6 LL ±20%(M) ECJ2VB1H223@ 0.6 LL ECJ2VB1H273K 0.85 LL ECJ2VB1H333@ 0.85 LL ECJ2VB1H393K 0.85 LL ECJ2FB1H473@ 1.25 LL ECJ2VB1E473@ 0.85 L L ECJ2FB1H563K 1.25 LL ECJ2VB1E563K 0.85 L L ECJ2FB1H683@ 1.25 LL ECJ2VB1E683@ 0.85 L L ECJ2FB1H823K 1.25 LL ECJ2VB1E823K 0.85 L L ECJ2FB1H104@ 1.25 LL ECJ2VB1E104@ 0.85 L L ECJ2VB1C104@ 0.85 L L ECJ2FB1E154@ 1.25 L L ECJ2VB1C154@ 0.85 L L ECJ2FB1E224@ 1.25 L L ECJ2VB1C224@ 0.85 L L ECJ2FB1C334@ 1.25 L L ECJ2FB1C474@ 1.25 L L ECJ2FB1C684@ 1.25 L ECJ2FB1A684@ 1.25 L F Rated voltage DC50V DC25V DC16V (PF) (mm) F Y5V (mm) F Y5V (mm) F Y5V ECJ2VF1H103Z 0.6 L L ECJ2VF1H223Z 0.6 L L , 20% ECJ2VF1H473Z 0.6 L L (Z) ECJ2VF1H104Z 0.85 L L ECJ2VF1E104Z 0.6 L L ECJ2VF1C104Z 0.6 L L ECJ2VF1H224Z 0.85 L L ECJ2VF1E224Z 0.85 L L ECJ2VF1C224Z 0.6 L L ECJ2FF1E474Z 1.25 L L ECJ2VF1C474Z 0.85 L L 1: tolerance code. : 1 for K or M Packaging style code: V or F for taped version. (f 180 reel, taping pitch: 4 mm) : L W T Dimension tolerance ±0.15 mm : L W T Dimension tolerance ±0.2 mm Soldering method of dimension T>1 mm: Do not use flow soldering. As for the capacitance value 1 µf above, please refer the page 8 and 9 B
14 Standard Products for Type 13 (EIA 1206 ), Taped Version class 1 C G Rated voltage DC50V DC50V (mm) CH (mm) SL 3300 ECJ3VC1H332@ 0.6 L ECJ3VG1H332@ 0.6 L 3900 ECJ3VC1H392@ 0.6 L ECJ3VG1H392@ 0.6 L 4700 ±5%(J) ECJ3VC1H472@ 0.6 L ECJ3VG1H472@ 0.6 L 5600 or ECJ3VC1H562@ 0.85 L ECJ3VG1H562@ 0.6 L 6800 ±10%(K) ECJ3VC1H682@ 0.85 L 8200 ECJ3FC1H822@ 1.15 L ECJ3FC1H103@ 1.15 L class 2 Rated voltage DC50V DC25V DC16V Part No T Char. Part No T Char. Part No T Char. (mm) B X7R X5R (mm) B X7R X5R (mm) B X7R X5R ECJ3VB1E104@ 0.85 L L ECJ3VB1C104@ 0.85 L L ±10%(K) ECJ3VB1E154@ 0.85 L L ECJ3VB1C154@ 0.85 L L ECJ3YB1H224@ 1.6 L L ECJ3VB1E224@ 0.85 L L ECJ3VB1C224@ 0.85 L L or ECJ3VB1E334@ 0.85 L L ECJ3VB1C334@ 0.85 L L ±20%(K) ECJ3FB1E474@ 1.15 L L ECJ3VB1C474@ 0.85 L L ECJ3YB1E684@ 1.6 L L ECJ3VB1C684@ 0.85 L L 1: tolerance code. : 1 for K or M Packaging style code: V, F and Y for taped version. (f 180 reel, taping pitch: 4 mm) Soldering method of dimension T>1 mm: Do not use flow soldering. As for the capacitance value 1 µf above, please refer the page 8 and 9 B
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραUnit: mm Packaging (7 Reel) L W T / Symbol M B Paper tape Plastic tape 1.25±0.10 D - 1K 3.20± ±0.20 G - 1K 4.50±0.40
.. Features -Wide capacitance range, extremely compost size -Low inductance of capacitor for high frequency application -Excellent solderability and resistance to soldering heat, suitable for flow and
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitor
.. Features -Wide capacitance range, extremely compost size -Low inductance of capacitor for high frequency application -Excellent solderability and resistance to soldering heat, suitable for flow and
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitor
.. Features -Wide capacitance range, extremely compost size -Low inductance of capacitor for high frequency application -Excellent solderability and resistance to soldering heat, suitable for flow and
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραChilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραNTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραHigh Voltage Ceramic Capacitor (Radial Disc Type)
High Voltage Ceramic Capacitor (Radial Disc Type) 1. Material Characteristics Series No TEMP. CHAR. Working Temperature ( ) Insulation Resistance ( MΩ) 1 UJ -25~+85 100000 2 SL -25~+85 100000 Disspation
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραAnti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραFP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραLow Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
Διαβάστε περισσότεραSMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. AHA 11/11/01 CERTIFIED 2. Type Designation The type designation shall
Διαβάστε περισσότεραCSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότερα