Offshore (IEC) 1/2013
|
|
|
- Φοίβη Θεοδωρίδης
- 8 χρόνια πριν
- Προβολές:
Transcript
1 Offshore (IEC) 1/2013
2 Contents 0,6/1kV cables LKM-SHF2 & LKM-SHF2 FLEX...4 LKMM-SHF2...8 LKSM-SHF2 & LKSM-SHF2 FLEX...10 LKMSM-SHF LKSM-EMC-SHF LKSM-VFD-SHF ,6/1kV FR cables LKM-FRSHF LKSM-FRSHF V cables LKSM-SHF RFE-SHF RFE-SHF2 (i) V FR cables RFE-FRSHF RFE-FRSHF2 (i)...34 Technical information General information...36 Bending radius...37 Diameter tolerance...37 Core identification...37 Current rating...38 Short circuit current...39 Short circuit factors...39 Short time duty...40 Voltage drop...41 Subject to change without prior notice. See latest updates on our webpage
3 Helkama is specializing in the development and production of marine and offshore cables. By using the latest technology and advanced materials our offshore cables are light in weight, small in diameter and flexible, quick and easy to install. In this catalogue we present our IEC standard range of offshore cables. Our product range includes the standard flameretardant and oil resistant version as well as a fire resistant version. Our offshore cables are intended for any type of offshore application such as FPO, FPSO, Drilling ship, Topside, FSU etc. The only exception is areas where mud resistant cables are required. This part is covered by our NEK606 product range, which is presented in a separate catalogue. As a specialized and independent company, focusing on service, we have been able to grow steadily by quickly responding to our customers needs. Our short delivery times, backed up by extensive stocks, enable us to deliver punctually and keep our customers satisfied.
4 40,6/1kV CABLES LKM-SHF2 and LKM-SHF2 FLEX Unarmoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor 1, IEC 60228, class 2 - stranded copper conductor IEC 60228, class 5 (Flex) - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - separator tape 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
5 5 LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 5, x1,5 5, x2,5 5, x4 6, x6 7, x10 8, x16 Flex 9, x25 Flex 11, x35 Flex 12, x50 Flex 14, x70 Flex 17, x95 Flex 19, x120 Flex 21, x150 Flex 24, x185 Flex 27, x240 Flex 30, x300 Flex 33, x1,0 7, x1,5 8, x2,5 9, x4 10, x6 12, x10 14, x16 Flex 16, x25 Flex 20, x35 Flex 23, x50 Flex 27, x70 Flex 31, x1,0 8, x1,5 9, x2,5 10, x4 11, x6 13, x10 15, x16 Flex 17, x25 Flex 22, x35 Flex 25, x50 Flex 29, x70 Flex 34, x95 Flex 40, x120 Flex 44, x150 Flex 50, x185 Flex 57, x240 Flex 64, ,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page
6 1/ ,6/1kV CABLES LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 8, x1,5 10, x2,5 11, x4 12, x6 14, x10 16, x16 Flex 19, x25 Flex 24, x35 Flex 27, x50 Flex 33, x70 Flex 38, x95 Flex 44, x120 Flex 49, x1,0 9, x1,5 11, x2,5 12, x4 13, x6 15, x10 18, x16 Flex 21, x25 Flex 27, x35 Flex 30, x50 Flex 37, x70 Flex 42, x1,0 10, x1,0 13, x1,0 13, x1,0 14, x1,0 15, x1, x1, x1,0 19, x1, x1, G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page Tel , fax ,
7 7 LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,5 11, x1,5 15, x1,5 15, x1,5 16, x1,5 17, x1,5 18, x1,5 22, x1,5 22, x1,5 25, x2,5 13, x2,5 17, x2,5 17, x2,5 18, x2,5 19, x2,5 20, x2,5 24, x2,5 25, ,6/1kV CABLES 1/2013
8 80,6/1kV CABLES LKMM-SHF2 Unarmoured power cable with extruded filler 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor 1, IEC 60228, class 2 - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - extruded filler 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour black Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
9 9 LKMM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,5 9, x2,5 10, x4 11, x6 12, x10 14, x16 18, x25 23, x35 25, x50 30, x70 34, x1,5 9, x2,5 10, x4 12, x6 13, x10 15, x16 20, x25 24, x35 27, x50 32, x70 37, x95 42, x120 47, x150 53, x1,5 10, x2,5 11, x4 13, x6 14, x10 17, x16 21, x25 27, x35 30, x50 35, x70 40, x1,5 11, x2,5 12, x4 14, x6 16, x10 19, x16 24, x25 29, ,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5
10 10 0,6/1kV CABLES LKSM-SHF2 and LKSM-SHF2 FLEX Armoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - stranded copper conductor IEC 60228, class 5 (Flex) - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - filler tape 4. Armour - copper wire braid, coverage > 90% IEC tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
11 11 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 3,0 6, x1,5 3,0 6, x2,5 3,1 7, x4 3,1 7, x6 3,1 8, x10 3,5 9, x16 Flex 4,1 10, x25 Flex 4,9 13, x35 Flex 5,5 14, x50 Flex 8,7 17, x70 Flex 11,4 19, x95 Flex 11,5 21, x120 Flex 14,5 23, x150 Flex 14,7 26, x185 Flex 15,2 29, x240 Flex 18,2 32, x300 Flex 18,7 35, x1,0 3,6 9, x1,5 3,8 9, x2,5 4,3 10, x4 4,9 12, x6 5,4 13, x10 8,7 15, x16 Flex 10,0 18, x25 Flex 14,5 23, x35 Flex 14,7 25, x50 Flex 18,1 29, x70 Flex 18,7 34, x1,0 3,7 9, x1,5 4,1 10, x2,5 4,6 11, x4 5,2 12, x6 5,8 14, x10 9,3 16, x16 Flex 10,7 19, x25 Flex 14,6 24, x35 Flex 15,0 27, x50 Flex 18,3 32, x70 Flex 22,0 36, x95 Flex 22,8 42, x120 Flex 37,8 47, x150 Flex 39,3 53, x185 Flex 47,9 59, ,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page
12 12 0,6/1kV CABLES 1/2013 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 4,1 10, x1,5 4,5 11, x2,5 5,0 12, x4 5,8 13, x6 8,8 15, x10 10,3 18, x16 Flex 11,9 21, x25 Flex 14,8 27, x35 Flex 18,1 29, x50 Flex 19,5 35, x70 Flex 22,6 40, x95 Flex 37,8 47, x120 Flex 39,3 52, x150 Flex 48,2 59, x1,0 4,5 10, x1,5 5,0 12, x2,5 5,6 13, x4 8,6 15, x6 9,7 17, x10 11,5 20, x16 Flex 13,2 23, x25 Flex 18,1 29, x1,0 4,9 11, x1,0 8, x1, x1,0 9, x1,0 11, x1,0 11,4 17, x1,0 12,5 20, x1,0 12, x1,0 14,4 23, G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page Tel , fax ,
13 13 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C x1,5 5,4 13, x1,5 9,6 16, x1,5 9,9 17, x1,5 10,5 18, x1,5 11,5 19, x1,5 11,7 19, x1,5 13,9 23, x1,5 14,1 24, x1,5 16,0 26, x2,5 8,5 15, x2,5 11,5 18, x2,5 11,5 19, x2,5 11,8 20, x2,5 12,5 21, x2,5 13,2 22, x2,5 15,7 26, x2,5 16,1 27, G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Min. bending radius fixed installation 0,6/1kV CABLES 1/2013
14 14 0,6/1kV CABLES LKMSM-SHF2 Armoured power cable with extruded filler 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor 1, IEC 60228, class 2 - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Oil resistant 3. Bedding Flameretardant - extruded filler Fireresistant 4. Armour - copper wire braid, coverage > 90% IEC tinned copper wire braid on request Halogenfree 5. Sheath Low smoke - halogen-free thermosetting polyolefine, SHF2 IEC emission - standard colour black Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
15 15 LKMSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,5 4,9 11, x2,5 5,4 12, x4 6,0 14, x6 9,1 15, x10 10,7 17, x16 12,4 20, x25 15,4 24, x35 17,1 27, x50 20,2 31, x1,5 5,1 12, x2,5 5,7 13, x4 6,4 14, x6 9,7 16, x10 11,4 18, x16 13,2 21, x25 16,4 26, x35 18,2 28, x50 21,9 33, x70 25,4 38, x95 40,6 45, x120 44,8 49, x150 51,7 55, x1,5 5,6 13, x2,5 6,3 14, x4 9,5 16, x6 10,6 17, x10 12,5 20, x16 14,5 23, x25 18,2 28, x35 20,2 31, x50 24,1 37, x70 45,7 43, x95 45,0 49, x120 51,2 55, x1,5 6,1 14, x2,5 9,2 15, x4 10,4 17, x6 11,8 19, x10 13,8 22, x16 16,0 25, x25 20,1 31, ,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5
16 16 0,6/1kV CABLES LKSM-EMC-SHF2 Armoured power and control cable with improved EMC screening 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor 1, IEC 60228, class 2 - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - filler tape 4. Screen - copper tape, coverage 100% 5. Armour - copper wire braid, coverage > 90% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Design to meet requirements for improved EMC screening properties. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Transfer impedance IEC (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) Oil resistance IEC conditions according to For details see general information section Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: See technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
17 17 LKSM-EMC-SHF2 0,6/1kV Part number Normal Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 3,0 6, x1,5 3,0 6, x2,5 3,0 7, x4 3,1 7, x6 3,1 8, x10 3,3 9, x16 4,2 11, x25 4,9 13, x35 5,6 14, x50 8,7 17, x70 9,9 19, x95 11,5 21, x120 12,4 24, x150 14,7 26, x1,0 3,3 9, x1,5 3,6 10, x2,5 4,1 10, x4 4,6 12, x6 5,1 13, x10 8,5 16, x16 11,4 18, x25 12,4 23, x35 14,7 25, x1,0 3,6 9, x1,5 3,8 10, x2,5 4,3 11, x4 5,0 12, x6 5,6 14, x10 8,9 16, x16 10,9 19, x25 14,6 24, x35 15,1 27, x50 18,3 32, x70 22,0 36, x95 22,9 42, x120 37,9 47, x150 39,4 53, ,6/1kV CABLES 1/2013 Table continues on next page
18 18 0,6/1kV CABLES 1/2013 LKSM-EMC-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 3,8 10, x1,5 4,3 11, x2,5 4,7 12, x4 5,5 13, x6 8,5 15, x10 9,9 18, x16 12,0 22, x25 14,8 27, x35 18,2 29, x50 19,6 35, x70 22,6 40, x95 37,9 47, x120 39,4 52, x150 43,7 59, x1,0 4,2 11, x1,0 4,7 12, x1,0 9,9 15, x1,0 9,9 16, x1,0 9,9 16, x1,0 10,0 17, x1,0 10,2 18, x1,0 12,1 21, x1,0 12,5 22, x1,0 14,1 24, Table continues on next page
19 19 LKSM-EMC-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,5 4,7 12, x1,5 5,1 13, x1,5 9,9 16, x1,5 10,0 17, x1,5 10,1 18, x1,5 10,7 19, x1,5 11,4 20, x1,5 13,6 23, x1,5 13,9 24, x1,5 15,7 26, x2,5 5,3 13, x2,5 5,8 14, x2,5 11,4 18, x2,5 11,5 19, x2,5 11,5 20, x2,5 12,2 21, x2,5 12,9 22, x2,5 15,3 26, x2,5 15,8 27, x2,5 17,7 30, ,6/1kV CABLES 1/2013
20 20 1,8/3kV CABLES LKSM-VFD-SHF2 Armoured power and control cable with improved EMC screening 1,8/3kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - filler tape 4. Screen - copper tape, coverage 100% 5. Armour - copper wire braid, coverage > 90% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Design to meet requirements for Variable Frequency Drivers (VFD). Suitable for voltage peaks up to 3kV. Main characteristics Rated voltage 1,8/3kV (3,6kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Transfer impedance IEC (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) Oil resistance IEC conditions according to For details see general information section Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: See technical information section. Cable with yellow/green protective earth (PE) conductor on request Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
21 21 LKSM-VFD-SHF2 1,8/3kV Part number Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x16 5,5 14, ) x25 8,5 16, ) x35 9,3 17, ) x50 10,3 19, ) x70 11,3 20, ) x95 12,5 23, ) x120 13,6 25, ) x150 14,7 27, ) x185 15,8 29, ) x240 17,6 33, ) x300 18,9 35, ) x16 16,4 26, x25 16,9 29, x35 18,7 32, x50 28,8 37, x70 35,0 41, x95 35,4 46, ) x120 38,6 50, ) x150 42,0 55, ) x185 45,5 60, ) x95+3x16 35,4 46, ) x120+3x25 38,6 50, ) x150+3x25 42,0 55, ) Note 1,8/3kV CABLES 1/2013 NOTE! 1) = Protective earth (PE) rules are not fulfilled. (PE rules, for cables over 16 2 the PE-conductor have to be half of main conductor and min This according to IEC , Electrical installations in ships Choice and installation of electrical cables) 2 = Three additional protective earth (PE) conductors. Protective earth (PE) rules are fulfilled.
22 22 0,6/1kV CABLES LKM-FRSHF2 Fire-resistant unarmoured power and control cable 0,6/1kV DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 (class 5 on request) - tinned stranded copper conductor on request 1/ Insulation - Mica tape - XLPE plastic IEC Bedding - separator tape 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Fire-resistant IEC series Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
23 23 LKM-FRSHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x1,0 8, x1,5 9, x2,5 10, x4 11, x6 13, x10 15, x16 17, x25 21, x1,0 9, x1,5 9, x2,5 11, x4 12, x6 14, x10 16, x16 18, x25 23, x35 25, x50 29, x70 34, x95 38, x1,0 9, x1,5 11, x2,5 12, x4 13, x6 15, x10 18, x16 20, x25 25, x35 28, x50 32, x70 38, x95 43, x1,0 11, x1,5 12, x2,5 13, x1,0 12, x1,0 15, x1,0 15, x1,0 16, x1,0 17, x1,0 18, x1,0 21, x1,0 22, x1,0 25, x1,5 13, x1,5 16, x1,5 17, x1,5 18, x1,5 19, x1,5 20, x1,5 24, x1,5 25, x1,5 28, x2,5 14, x2,5 18, x2,5 19, x2,5 20, x2,5 21, x2,5 23, x2,5 27, x2,5 28, x2,5 31, G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 0,6/1kV CABLES 1/2013
24 24 0,6/1kV CABLES LKSM-FRSHF2 Fire-resistant armoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 (class 5 on request) - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic EC Bedding - separator tape 4. Armour - copper wire braid, coverage > 90% IEC tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Fire-resistant IEC series Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
25 LKSM-FRSHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x4 3,1 8, x6 3,1 8, x10 3,5 10, x16 4,0 11, x25 4,9 13, x35 5,5 14, x50 8,7 16, x70 11,4 18, x95 11,5 20, x120 14,5 22, x150 14,7 25, x185 15,2 27, x240 18,2 30, x300 18,7 33, x1,0 3, x1,5 3,8 10, x2,5 4,3 11, x4 4,9 13, x6 5,4 14, x10 8,7 16, x16 10,0 19, x25 14,5 23, x35 14,7 26, x50 18,1 29, x70 18,7 34, x1,0 4,1 10, x1,5 4,1 11, x2,5 4,6 12, x4 5,2 13, x6 5,7 15, x10 9,3 17, x16 10,7 20, x25 14,6 25, x35 15,0 28, x50 18,3 31, x70 22,0 36, x95 22,8 40, x120 37,8 45, x1,0 4, x1,5 4,5 12, x2,5 5,0 13, x4 5,7 14, x6 8,8 16, x10 10,3 19, x16 11,9 22, x25 14,8 27, x35 18,1 30, x50 19,5 35, x70 22,4 40, x95 37,8 46, x1,0 4, x1,5 5,0 13, x2,5 5,6 14, x1,0 4, x1,0 8,7 16, x1, x1,0 11, x1,0 11, x1,0 11, x1,0 12,5 23, x1,0 12, x1,0 14,4 26, x1,5 5,4 14, x1,5 9,6 18, x1,5 9,9 19, x1,5 11,7 20, x1,5 11,8 21, x1,5 11,8 22, x1,5 13,9 26, x1,5 14,1 26, x1,5 16,0 29, x2,5 8,6 16, x2,5 11,7 20, x2,5 11,8 21, x2,5 11,9 22, x2,5 12,5 23, x2,5 13,2 24, x2,5 15,7 29, x2,5 16,1 29, x2,5 18,1 33, G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 25 0,6/1kV CABLES 1/2013
26 26 250V CABLES LKSM-SHF2 Armoured control and instrumentation cable 250V 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Bedding - separator tape 4. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 90% IEC tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: black numbers on white base Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
27 27 LKSM-SHF2 250V Part number Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation x0,5 3,1 7,0 80 8, x0,5 3,1 7,5 85 7, x0,5 3,1 8,0 95 6, x0,5 3,2 8, , x0,5 3,5 9, , x0,5 4,6 11, , x0,5 4,8 11, , x0,5 5,1 12, , x0,5 5,5 12, , x0,5 5,8 13, , x0,5 6,1 14, , x0,5 6,8 15, , x0,5 6,9 15, , x0,5 9,9 16, , x0,5 10,9 18, , x0,75 3,6 7, , x0,75 3,6 7, , x0,75 3,6 8, , x0,75 4,1 9, , x0,75 4,1 10, , x0,75 5,1 12, , x0,75 5,3 12, , x0,75 5,6 13, , x0,75 6,1 14, , x0,75 6,3 14, , x0,75 11,0 18, , x0,75 11,7 17, , x0,75 11,7 17, , x0,75 11,8 18, , x0,75 11,9 19, , V CABLES 1/2013 Other sizes on request.
28 28 250V CABLES RFE-SHF2 Armoured instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Twisted pair - two insulated cores twisted together to form a pair See next page for Quad 4. Bedding - filler tape 5. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 94% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Electrical data: Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,5 2 0,75 2 1,5 2 Unit ,4 ohm/km nf/km 0,6 0,6 0,7 mh/km Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
29 29 RFE-SHF2 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation x2x0,5 7, x2x0,5 Quad 8, x2x0,5 10, x2x0,5 11, x2x0,5 14, x2x0,5 14, x2x0,5 17, x2x0,5 17, x2x0,5 18, x2x0,5 19, x2x0,5 21, x2x0,5 23, x2x0,5 28, x2x0,75 7, x2x0,75 Quad 9, x2x0,75 11, x2x0,75 12, x2x0,75 15, x2x0,75 16, x2x0,75 18, x2x0,75 19, x2x0,75 20, x2x0,75 21, x2x0,75 23, x2x0,75 26, x2x0,75 29, x2x1,5 9, x2x1,5 Quad 11, x2x1,5 14, x2x1,5 17, x2x1,5 20, x2x1,5 21, x2x1,5 24, x2x1,5 25, x2x1,5 27, x2x1,5 31, x2x1,5 35, x2x1,5 39, V CABLES 1/2013 Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... (Quad)cable is built up as a star quad with the following identification 1 core white 2 core blue 3 core white 4 core blue
30 30 250V CABLES RFE-SHF2 (i) Armoured and pair screened instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC Twisted pair & pair screen - two insulated cores twisted together to form a pair - plastic coated aluminium tape and a tinned copper drain wire 4. Bedding - filler tape 5. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 94% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Electrical data: Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km nf/km 0,6 0,7 mh/km Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
31 31 RFE-SHF2(i) 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation x2x0,75 7, x4x0,75 9, x2x0,75 11, x2x0,75 13, x2x0,75 15, x2x0,75 16, x2x0,75 19, x2x0,75 20, x2x0,75 21, x2x0,75 24, x2x0,75 27, x2x1,5 10, x4x1,5 11, x2x1,5 14, x2x1,5 17, x2x1,5 20, x2x1,5 22, x2x1,5 25, x2x1,5 26, x2x1,5 28, x2x1,5 32, Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... The pairs are also covered by a numbered tape (1, 2, 3, 4, 5...) 250V CABLES 1/2013
32 32 250V CABLES RFE-FRSHF2 Fire-resistant armoured instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic IEC Twisted pair - two insulated cores twisted together to form a pair See next page for Quad 4. Bedding - filler tape 5. Armour - drain wire (in all sizes) - copper wire braid, coverage > 94% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Fire-resistant IEC Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Electrical data Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km nf/km 0,6 0,7 mh/km Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
33 33 RFE-FRSHF2 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation x2x0,75 9, x2x0,75 Quad 11, x2x0,75 14, x2x0,75 16, x2x0,75 20, x2x0,75 21, x2x0,75 24, x2x0,75 25, x2x0,75 27, x2x0,75 31, x2x0,75 34, x2x1,5 10, x2x1,5 Quad 12, x2x1,5 16, x2x1,5 18, x2x1,5 22, x2x1,5 24, x2x1,5 27, x2x1,5 29, x2x1,5 30, x2x1,5 33, V CABLES 1/2013 Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... (Quad)cable is built up as a star quad with the following identification 1 core white 2 core blue 3 core white 4 core blue
34 34 250V CABLES RFE-FRSHF2 (i) Fire-resistant armoured and pair screened instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC , design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic IEC Twisted pair & pair screen - two insulated cores twisted together to form a pair - plastic coated aluminium tape and a tinned copper drain wire 4. Bedding - filler tape 5. Armour - drain wire copper - copper wire braid, coverage > 94% IEC tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC test for single insulated wire and cable IEC test for bunched wires and cables, category A Fire-resistant IEC Halogen-free IEC series Smoke emission IEC series Oil resistance IEC conditions according to Electrical data Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km nf/km 0,6 0,7 mh/km Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel , fax ,
FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN
Halogen- free low smoke fire resistant security power cables with copper concentric conductor CONSTRUCTION Conductors: bare copper conductor, circular solid class 1 (RE) or stranded circular or circular
Screened electronic cable LiYCY
Screened electronic cable LiYCY conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC screen: Cu-braiding screen over strand: Cu-braid, tinned screen coverage:
Control cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
Screened electronic cable LiYCY
Screened electronic cable LiYCY Conductor material: bare copper Conductor class: class 5 = fine stranded Insulation: PVC Screen: copper braid, tinned Screen coverage: 70 % Sheathing material: PVC Flame-retardant:
Product Catalog NEK 606/BFOU/RFOU/BU/RU. Marine, oil, gas and offshore cables
Product Catalog NEK 606/BFOU/RFOU/BU/RU Marine, oil, gas and offshore cables Offshore Cables Basic Program IEC / NEK TS 606 Index NEK 606 Cable types... 3 Halogen-free, mud resistant instrumentation cable
Data/LAN Cables Cat 6 F/UTP PVC
Data/LAN Cables Cat 6 F/UTP PVC RoHS REACH Application 10 BASE-T (IEEE 802.3) Ethernet. 100 BASE-T (IEEE 802.3u) Fast Ethernet 100 VG-AnyLAN (IEEE 802.12). 4/6 Mbps Token Ring (IEEE 802.5) 100 Mbps CDDI.
CHAROONG THAI WIRE & CABLE PUBLIC COMPANY LIMITED
CHAROONG THAI WIRE & CABLE PUBLIC COMPANY LIMITED CABLE TYPE : CTW-CVVS 00 V ( STRANDED CONDUCTOR ) : 00 V 70 C PVC INSULATED AND SHEATHED CONTROL CABLE WITH SHIELD TAPE PAGE 1/ APPLICATION Supervisory
FLAME RETARDANT POWER CABLE. 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY. Application Standard
FLAME RETARDANT POWER CABLE Cable Designation 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY Application Standard 0.6 / 1kV SPYCBY - Design guide : JIS C 3410(2010) -
OFFSHORE CABLES GENERAL CATALOGUE. Offshore Cables. technergy INTEGRATED CABLING SOLUTIONS
OFFSHORE CABLES GENERAL CATALOGUE Offshore Cables technergy INTEGRATED CABLING SOLUTIONS TM 1 TEOF Offshore Cables INTEGRATED CABLING SOLUTIONS TM technergy Introduction Every offshore platform requires
FRNC power cable Cu/XLPE/ LSZH/SWA/LSZH acc. to BS 6724
FRNC power cable Cu/XLPE/ LSZH/SWA/LSZH acc. to BS 6724 Conductor material: copper, bare Conductor class: class 2 = stranded Insulation: XLPE Material inner sheath: halogen-free Armour: round steel wire,
Outer diameter (mm) ca.
........ Sz JZD...... SKW PRAKAB Products 1 CHKH R, 1 CXKH R Energy cable : TP PRAKAB 02/99 5. edition Rated voltage: 0.6/1 kv Usage: The cables are specified for stationary distribution of electrical
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Halogen free Shipboard Cable IEC 60092-350, 353, 354, 376
Halogen free Shipboard IEC 60092-350, 353, 354, 376 TMC Co., Ltd has been pursuing innovation in technology and products for the specialty industrial cable market. For 23 years TMC has had a single-minded
Applications Coaxial cables for high frequency. Coaxial cables from 50 Ω to 95 Ω. Construction
Standard coaxial cables KX & RG coaxial cables KX/RG Applications Coaxial cables for high frequency connections. Coaxial cables from 50 Ω to 95 Ω Construction 1- CONDUCTOR Stranded or solid, in bare copper
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Magnet Wire General Engineering Data Bare and Film Insulated Copper and Aluminum
Magnet Wire General Engineering Data Bare and Film Insulated Copper and Aluminum CABLE Magnet Wire General Engineering Data Bare and Film Insulated Copper and Aluminum Forward This booklet contains engineering
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
QFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
Ferrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
Thermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Melf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement