Power Electronics Capacitors Guide
|
|
|
- Κάρμη Βλαχόπουλος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Power Electronics Capacitors Guide Snubber Capacitors Conduction Cooled Power Capacitors DC-Link Capacitors Capacitors for Medical Instruments Ed:Sep.2013.Rev:0 DAL-K Un 1100V DC 1200 μf ±10% -40/+85 SH IEC 61071
2 Snubber Capacitors DMF-S series CONTENTS SA Series ---- P 2~6 SB Series ---- P 7~10 SC Series ---- P 11~15 SD Series ---- Coming up DC Link Capacitors DAL-K series Capacitor ---- P16~22 Conduction Cooled Power Capacitors DHF series SP TYPE ---- P 23~30 D500T TYPE ---- P 31~34 DHC TYPE ---- P 35~36 Capacitors for Medical Instruments DMF-M series P 37 DAEDONG CAPACITOR CO.,LTD. REV:0 SEP DAEDONG CAPACITOR CO., LTD.
3 Snubber Capacitors DMF-SA Series Polypropylene Film Capacitor Applications Switching capacitor for resonant circuits, industrial and motor speed controls, induction heaters. High voltage, high current and high pulse applications such as : Snubber/ protection in semiconductor circuits Clamper in IGBT and MOSFET circuits Characteristics Dielectric material : Polypropylene film, Self-healing Property Electrode material : Single side Metallized film Winding construction : Extended metallized polypropylene film with internal series connection Enclosure : Preformed UL 94 V-O plastic case with thermosetting Reference standard : IEC Specifications Rated Voltage VDC :550,00,850,1000,1200,1500,2000,2500,3000 VAC:340,420,500,575,630,650,700,725,750 Capacitance Range 0.068μF ~ 18.5μF Capacitance Tolerance J(±5%), K(±10%) Operating temperature range -40 ~ +85 Withstanding voltage Insulation resistance Between terminals Rated Voltagex1.6Vdc, 10sec Between terminal to case Between terminals Rated Voltagex2+1000Vac, at 60Hz for 60sec DC 500V, 1minute, at 25 C 0.33MFD( 100,000MΩ), C>0.33MFD( 30,000MΩ) Dissipation factor at 1KHz and 25 Drawing 14±0.3 14±0.3 W Fig1)Terminal F T Fig2)Terminal G Rated Voltage (VDC) 550 Rated Capacitance ( μf ) ~ ~ Type W T H P1 P2 F F F F F F * Type : Terminal(F,G,H,I,J,K----), ex)f3:terminal F, Case 3 ex)g4:terminal G, Case 4 W T REV:0 SEP DAEDONG CAPACITOR CO., LTD.
4 Snubber Capacitors DMF-SA Series Dimension Table : Nominal Values Working Voltage 550 VDC (340 VAC) Dimension (mm) ,3 F,G ,1 F,G ,8 F,G ,2 F,G ,1 F,G ,7 F,G ,3 F,G ,3 F,G ,1 F,G ,9 F,G ,8 F,G ,1 F,G ,9 F,G ,7 F,G ,6 F,G Working Voltage 700 VDC (420 VAC) Polypropylene Film Capacitor ,5 F,G ,1 F,G F,G ,6 F,G ,6 F,G ,5 F,G ,1 F,G 4, ,7 F,G ,7 F,G ,6 F,G ,2 F,G ,8 F,G ,9 F,G ,7 F,G Working Voltage 850 VDC (500 VAC) ,6 F,G ,2 F,G ,6 F,G (P) ,6 Wire 2-pin(1.2Φ) REV:0 SEP DAEDONG CAPACITOR CO., LTD.
5 DMF-SA Series Working Voltage 850 VDC (500 VAC) ,2 F,G F,G F,G ,7 F,G ,7 F,G ,6 F,G ,0 F,G ,0 F,G ,9 F,G ,9 F,G ,8 F,G ,7 F,G Working Voltage 1000 VDC (575 VAC) 0, F,G F,G ,5 2.9 F,G , F,G F,G F,G F,G , F,G F,G , F,G F,G , F,G F,G F,G Working Voltage 1200 VDC (630 VAC) , ,9 F,G ,1 F,G ,2 F,G ,8 F,G ,4 F,G ,9 F,G ,8 F,G ,4 F,G ,0 F,G ,0 F,G ,9 F,G ,7 F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
6 DMF-SA Series Working Voltage 1500 VDC (650 VAC) F,G F,G ,6 12 5,3 F,G ,4 14,5 4,3 F,G ,6 18,5 3,6 F,G ,5 2,5 F,G ,5 2,1 F,G ,5 2,1 F,G ,5 25 3,0 F,G ,5 F,G ,5 2,4 F,G F,G Working Voltage 2000 VDC (700 VAC) ,2 11,5 6,4 F,G ,7 13 5,6 F,G ,3 14 4,6 F,G ,7 19 3,7 F,G ,6 21 3,3 F,G ,8 23,5 2,9 F,G ,2 25,5 2,6 F,G ,5 F,G ,5 27,5 2,7 F,G ,2 F,G Working Voltage 2500 VDC (725 VAC) ,7 F,G ,1 F,G ,5 10 8,3 F,G ,5 7,2 F,G ,5 6,0 F,G ,5 17,5 4,4 F,G ,5 18,5 3,9 F,G ,5 22 3,4 F,G ,1 F,G ,4 22,5 3,8 F,G ,5 2,9 F,G ,5 2,7 F,G Working Voltage 3000 VDC (750 VAC) μf W T H P1 P2 mω ,5 F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
7 DMF-SA Series Working Voltage 3000 VDC (750 VAC) Dimension (mm) ,9 F,G ,8 F,G ,5 13,5 7,3 F,G ,3 F,G ,5 5,3 F,G ,5 4,2 F,G ,3 19 5,2 F,G ,9 21,5 4,6 F,G ,2 23 4,1 F,G ,6 27 3,5 F,G IGBT Snubber Capacitor Element Costruction Wire-type Drawing Fig 3) Fig 4) Fig 3) REV:0 SEP DAEDONG CAPACITOR CO., LTD.
8 Snubber Capacitors DMF-SB Series Polypropylene Film Capacitor Applications Snubber capacitor for energy conversion and control in power electronics. High voltage, high current and high pulse applications such as : IGBT protection circuits, Snubber networks High DV/DT, Low/High frequency tuning circuits Characteristics Dielectric material : Polypropylene film Electrode material : Aluminium foil Winding construction : Non-inductive extended foil(low Inductance), impregnated Enclosure : Preformed UL 94 V-O plastic case with thermosetting Specifications Rated Voltage VDC : 1000, 1250, 1500, 2000VDC VAC : 480, 550, 630, 750VAC Capacitance Range 0.1μF ~ 3μF Capacitance Tolerance J(±5%), K(±10%) Operating temperature range -40 ~ +85 Withstanding voltage Between terminals Rated Voltagex2.0Vdc, 10sec Between terminal to case 3000Vac at 60Hz for 60sec Insulation resistance Between terminal to case DC 500V, 1minute, at 25 C 0.33MFD( 100,000MΩ), C>0.33MFD( 30,000MΩ) Dissipation factor at 1KHz and 25 Drawing 14±0.3 14±0.3 W Fig1)Terminal F T Fig2)Terminal G Rated Voltage (VDC) Rated Capacitance ( μf ) ~ ~ Type W T H P1 P2 F F F F F F * Type : Terminal(F,G,H,I,J,K----), ex)f3:terminal F, Case 3 W T REV:0 SEP DAEDONG CAPACITOR CO., LTD.
9 Snubber Capacitors DMF-SB Series Polypropylene Film Capacitor Dimension Table : Nominal values Working Voltage 1000 VDC (480 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G Working Voltage 1250 VDC (550 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
10 DMF-SB Series Working Voltage 1250 VDC (550 VAC) F,G F,G F,G F,G F,G F,G Working Voltage 1500 VDC (630 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G Working Voltage 2000 VDC (750 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
11 DMF-SB Series Typical Performance Curves IGBT SNUBBER Capacitor Element Costruction REV:0 SEP DAEDONG CAPACITOR CO., LTD.
12 Snubber Capacitor DMF-SC Series Polypropylene Film Capacitor Applications Snubber capacitor for energy conversion and control in power electronics. High voltage, high current and high pulse applications such as : IGBT protection circuits, Snubber networks Protection circuits in SMPS Characteristics Dielectric material : Polypropylene film, Self-healing Property Electrode material : Aluminium foil and PP film/mpp film. Winding construction : Non-inductive extended foil(low Inductance),Polypropylene film, alumium foil plus metallised polypropylene film wound in a series connection. Enclosure : Preformed UL 94 V-O plastic case with thermosetting Reference standard : IEC Specifications Rated Voltage VDC : 1000, 1250, 1500, 2000, 3000VDC VAC : 480, 550, 630, 700, 750VAC Capacitance Range 0.1μF ~ 3.3μF Capacitance Tolerance J(±5%), K(±10%) Operating temperature range -40 ~ +85 Withstanding voltage Between terminals Rated Voltagex1.6Vdc, 10sec Between terminal to case Rated Voltagex2+1000Vac, at 60Hz for 60sec Insulation resistance Between terminals DC 500V, 1minute, at 25 C 0.33MFD( 100,000MΩ), C>0.33MFD( 30,000MΩ) Dissipation factor at 1KHz and 25 Drawing 14±0.3 14±0.3 W Fig1)Terminal F T Fig2)Terminal G Rated Rated Voltage Capacitance (VDC) ( μf ) ~ ~ Type W T H P1 P2 F F F F F F * Type : Terminal(F,G,H,I,J,K----), ex)f3:terminal F, Case 3 W T REV:0 SEP DAEDONG CAPACITOR CO., LTD.
13 Snubber Capacitors DMF-SC Series Dimension Table : Nominal values Working Voltage 1000 VDC (480 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G Working Voltage 1250 VDC (550 VAC) Polypropylene Film Capacitor F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
14 DMF-SC Series Working Voltage 1500 VDC (630 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G Working Voltage 2000 VDC (700 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G Working Voltage 3000 VDC (750 VAC) F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G F,G REV:0 SEP DAEDONG CAPACITOR CO., LTD.
15 DMF-SC Series Typical Performance Curves IGBT Snubber Capacitor REV:0 SEP DAEDONG CAPACITOR CO., LTD.
16 DMF-SC Series Element Costruction Frequency Derating AC Voltage Derating v/s Frequency at 10 internal temperature Rise (general reference). REV:0 SEP DAEDONG CAPACITOR CO., LTD.
17 DC-Link Capacitors DAL-K Series Applications DAL- K series are made with cylindrically-shaped aluminium case or rectangular aluminium case and big capacitance. As well as using designed specially metallized polypropylene film for the and maximium peak current(î). high- surge voltage(us), high- ripple current (I max), Thay are apply to DC-Link and wind & solar power inverters,charge & discharge, general DC power circuit, UPS etc. Characteristics Items Characteristics Metallized Polypropylene Film Outline Drawings Standard nominal cylindrically-shaped aluminium case Temperature Range Rated Voltage UR Surge Voltage U s Ripple Voltage U r Voltage Test UBB -40 C ~ +85 C 900 V DC ~ 1500 V DC 1350 V ~ 2250 V 200 Vpk-pk ~ 350 Vpk-pk UR 1.5 V DC / 10 sec Voltage Test UBG 3200V AC / 1min Terminals (permitted Torque) M6 x 10 (4 Nm) Stud Bolt (permitted Torque) M12 x 16/18 (7 Nm) Life Time Test / Standard IEC DAL-K Un 1100V DC 1200 μf ±10% -40/+85 IEC SH Dielectric Electrode Cap Impregnants Case Material Vibration Humidity Specially designed Metallized Polypropylene Film Option:Segmented Metalization with Fuse Function PBT UL 94-V0 listed Epoxy Resin UL 94-V0 listed Cylindrically -Shaped Aluminium Impact Case or Rectangular-Shaped Aluminium Case IEC , 30 cycles Hz 10g Class F: 75% annual average, 95% 30 days/year DAEDONG Referance standard: IEC Outline Drawings (standard nominal cylindricaliy case size) Standard nominal rectangular-shaped aluminium case Ø D P L2 LC Ls Stud Bolt I T M12 x A M12 x A M12 x A M12 x A 136(140) M12 x A IT: Terminal allowance current I max (rms) vs Operating Voltage & Operating Temperature Operating Voltage 0.7 UR 0.8 UR 0.9 U R 1.0 U R Max. Voltage vs operating Temperature 50 C I max 60 C multiplier 70 C at T a natural 75 C convection 80 C C 0 Expected Life Time(hr) vs Hotspot Temperature and Working Voltage REV:0 SEP DAEDONG CAPACITOR CO., LTD.
18 DC-Link Capacitors DAL-K Series Metallized Polypropylene Film capacitor Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x x x x x x x x x x x x x x x x x x x x x x x x x x x106 UR:900 V DC x145 US :1350 V x87 Ur: 200 V x x x x x x x x x x x x x x x x x x159 Remark REV:0 SEP DAEDONG CAPACITOR CO., LTD.
19 Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x x x x x x x x x x x x x x x225 UR:900 VDC x175 Us:1350 V x x 120 Ur: 200 V x x x x x x x x x x x x x x x x x x x x x x x x70 UR:1100 VDC x95 Us:1650 V x87 Ur: 250 V x x x x x x x x x x x x x x x x x x x x x x x x x x 70 REV:0 SEP DAEDONG CAPACITOR CO., LTD. Remark
20 Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x x x x x x x x x175 UR:1100 VDC x x 75 Us:1650 V x145 Ur: 250 V x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x197 UR:1100 VDC x197 Us:1650 V x x 145 Ur: 250 V x x x x x x x x x x x x x x x x x x x x x x x x 106 REV:0 SEP DAEDONG CAPACITOR CO., LTD. Remark
21 Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x 87 UR:1300 VDC x 70 Us:1950 V x 120 Ur: 300 V x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 145 UR:1300 VDC x 197 Us:1950 V x x 106 Ur: 300 V x x x x x x x x x x x x x x x x x x x x x x x x 70 REV:0 SEP DAEDONG CAPACITOR CO., LTD. Remark
22 Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x 75 UR:1500 VDC x 87 Us:2250 V x 80 Ur:350 V x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 75 UR:1500 VDC x 175 Us:2250 V x 145 Ur:350 V x x x x x x x x x x x x x x x x x x x x x x x x x 120 REV:0 SEP DAEDONG CAPACITOR CO., LTD. Remark
23 Rated Voltage Capa- Maximum Maximum Maximum Charge Equivalent Equivalent Thermal Size U R citance Ripple Peak Surge Energy Series Series Resistance Surge Voltage Current Current Current Resistance Inductance Us (rms) Ripple Voltage CN I max Î I S W ESR ESL R th DØ x L1 U r (V DC / V) (µf) (A) Î [ka] (ka) W (J) (mω) (nh) (K/W) (mm) x x x x x x X x x x x x 225 Remark REV:0 SEP DAEDONG CAPACITOR CO., LTD.
24 Conduction-cooled Power Capacitors DHF-SP Series Applications DHF-SP Series capacitors are apply to Low to high frequency 51KHz to 995KHz,400 to 1000Vrms 200 to 1000Arms, 150 to 400Kvar induction heating installations for L-C resonant circuit. This model cooled flowing through rectangular-shapped outside copper electride connected, and conduction -cooled by bus bar. Polypropylene Film Capacitor Characteristics Dielectric film : Polypropylene film, Self-healing Property Electrode material : Aluminium foil and Metallized Polypropylene film. Outside electrode material : rectangular-shapped copper Winding construction : Non-inductive extended foil(low Inductance),Polypropylene film, alumium foil plus metallized polypropylene film wound combinnation. Sealing Material : Epoxy resin UL 94 V-O Element insulation : imbueing by high-bdv insulating oil Specifications Sinusoidal Voltage 400~1000 Vrms Max Current 200~1000 Arms Capacitance Range 0.05μF ~ 5μF Capacitance Tolerance nominal values ( μf )±10% Max Power 150~400 Kvar Frequency Range at.full Power 50~995 KHz Max Frequency 700~1000 KHz Stray Inductance < 3~5 Operating Temperature -40 ~ +65 Between terminals URx2 VAC,10sec or URx4 VDC,10sec Withstanding voltage Between terminal to case URx2.15 VAC,10sec (Min 2000VAC) Aging Test Between terminals URx1.25VAC,1000hr after test :Δc/cin 2% Loss- factor at 1KHz and 25 Reference standard : IEC REV:0 SEP DAEDONG CAPACITOR CO., LTD.
25 Conduction-cooled Power Capacitors DHF-SP Series Drawing Polypropylene Film Capacitor MODEL:DHF-SP150,SP150/200 A Type DHF-SP150 DAEDONG MODEL:DHF-SP180/300 B Type MODEL:DHF-SP405A MODEL:DHF-SP305B D Type C Type REV:0 SEP DAEDONG CAPACITOR CO., LTD.
26 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor Rating & Dimensions Table :Nominal Values Model DHF- SP150 DHF- SP150/200 DHF- SP180/300 DHF- SP305B DHF- SP405A Capacit- Sinus- Peak Max Max Frequency Freq Stray ance odial Voltage Current Power Range Limit Inductance Voltage at.full Power Type L W H(mm) ( μf ±10%) (V rms) ( V ) (A rms) (Kvar) (KHz) (KHz) (nh) A Dimensions A < < < < < < < < < < < < < < < < < < < <5 B < < < < < < < <5 C < < < < < <5 D < < <5 REV:0 SEP DAEDONG CAPACITOR CO., LTD.
27 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor MODEL:DHF-SP150 Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 0.05 μf 0.1 μf 0.17 μf 0.33 μf 0.5 μf 0.66 μf 1.33 μf 2.4 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
28 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor MODEL:DHF-SP150/200 Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 0.05 μf 0.1 μf 0.17 μf 0.33 μf 0.5 μf 0.66 μf 1.33 μf 2.4 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
29 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor MODEL:DHF-SP180/300 Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 0.1 μf 0.2 μf 0.33 μf 0.66 μf 1 μf 1.3 μf 2.6 μf 5 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
30 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor MODEL:DHF-SP 305B Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 0.1 μf 0.2 μf 0.33 μf 0.66 μf 1 μf 1.32 μf 2.6 μf 5 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
31 Conduction-cooled Power Capacitors DHF-SP Series Polypropylene Film Capacitor MODEL:DHF-SP 405A Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 0.33 μf 0.66 μf 1.33 μf 2.6 μf 5 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
32 Conduction-cooled Power Capacitors DHF-D500T Series Polypropylene Film Capacitor Applications DHF-D500T Series capacitors are apply to Medium frequency 9KHz to 82KHz, 500 to 1100Vrms 600 to 1000Arms, 500Kvar induction heating installations for L-C resonant circuit. This model cooled flowing through round -shapped outside copper electride connected, and conduction -cooled by bus bar. Characteristics Dielectric film : Polypropylene film, Self-healing Property Electrode material : Aluminium foil and Metallized Polypropylene film. Outside electrode material : round-shapped copper electrode. Winding construction : Non-inductive extended foil(low Inductance),Polypropylene film, alumium foil plus metallized polypropylene film wound combinnation. Sealing Material : Epoxy resin UL 94 V-O Element insulation : imbueing by high-bdv insulating oil Specifications Sinusoidal Voltage 500~1100 Vrms Max Current 600~1000 Arms Capacitance Range 1.4μF ~ 37μF Capacitance Tolerance nominal values ( μf )±10% Max Power 500 Kvar Frequency Range at.full Power 9~82 KHz Stray Inductance < 10 Operating Temperature -40 ~ +65 Between terminals URx2 VAC,10sec or URx4 VDC,10sec Withstanding voltage Between terminal to case URx2.15 VAC,10sec (Min 2000VAC) Aging Test Between terminals URx1.25VAC,1000hr after test :Δc/cin 2% Loss- factor at 1KHz and 25 Reference standard : IEC REV:0 SEP DAEDONG CAPACITOR CO., LTD.
33 Conduction-cooled Power Capacitors DHF-D500T Series MODEL:DHF-D500T Rating Table & Dimensions Polypropylene Film Capacitor Capacitance ( μf ±10%) Sinusoidal Voltage (V rms) Peak Voltage ( V ) Max Current (A rms) Max Power (Kvar) 500 Frwquency Range(KHz) at.full Power kvar 47~82 47~68 25~39 26~51 19~37 16~32 15~15 10~12 9~9 Stray inductance(nh) <10 Dimensions ØD (mm) 80Ø 101Ø 80Ø 88Ø 94Ø 80Ø 101Ø Drawing REV:0 SEP DAEDONG CAPACITOR CO., LTD.
34 Conduction-cooled Power Capacitors DHF-D500T Series MODEL:DHF-D500T Polypropylene Film Capacitor Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 1.4μF 3μF 4 μf 6.3 μf 8.5 μf 10 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
35 Conduction-cooled Power Capacitors DHF-D500T Series MODEL:DHF-D500T Polypropylene Film Capacitor Frequency VS Available Range : V(rms), I(A rms), Q(Kvar) CURVE 21μF 27μF 37 μf REV:0 SEP DAEDONG CAPACITOR CO., LTD.
36 Conduction-cooled Power Capacitors DHF-DHE Series Applications DHF-DHE Series capacitors are apply to high -medium frequency 115KHz to 448KHz, 525 to 700Vrms 550 to 800Arms, 325 to 400Kvar induction heating installations for L-C resonant circuit. This model cooled flowing through rectangular-shapped outside copper electride connected, and conduction -cooled by bus bar. Polypropylene Film Capacitor Characteristics Dielectric film : Polypropylene film, Self-healing Property Electrode material : Aluminium foil and Metallized Polypropylene film. Outside electrode material : rectangular-shapped outside copper electride. Winding construction : Non-inductive extended foil(low Inductance),Polypropylene film, alumium foil plus metallized polypropylene film wound combinnation. Sealing Material : Epoxy resin UL 94 V-O Element insulation : imbueing by high-bdv insulating oil Specifications Sinusoidal Voltage Max Current Capacitance Range 0.33 μf ~ 2.0 μf Capacitance Tolerance nominal values ( μf )±10% Frequency Range at.full Power Operating Temperature Between terminals Withstanding voltage Between terminal to case 525~700 Vrms 550~800 Arms Max Power 325 to 400 Kvar Aging Test Between terminals 115~448 KHz -40 ~ +65 URx2 VAC,10sec or URx4 VDC,10sec URx2.15 VAC,10sec (Min 2000VAC) URx1.25VAC,1000hr after test :Δc/cin 2% Loss- factor at 1KHz and 25 Reference standard : IEC REV:0 SEP DAEDONG CAPACITOR CO., LTD.
37 Conduction-cooled Power Capacitors DHF-DHE Series MODEL:DHF-DHE Series Rating Table & Dimensions Polypropylene Film Capacitor Model DHF-DHE 6033M DHF-DHE 6066M DHF-DHE 6100M DHF-DHE 6150M DHF-DHE 6200M Capacitance ( μf ±10%) Sinusoidal Voltage (V rms) Max Current (A rms) Max Power (Kvar) Frwquency Range(KHz) at.full Power kvar Dimensions L W H (mm) Stray Inductance (nh) 70 L 57 W 41 H < 5 Drawing H 41 L70 W 57 REV:0 SEP DAEDONG CAPACITOR CO., LTD.
38 Capacitors for Medical Instruments DMF-M Series Metallized Polypropylene Film Characteristics DMF-M Series capacitors designed with high heat -resistance metallized polypropylene film. This type is high stability and high reliability. And applicable medical instruments. Specifications Items Characteristics Capacitance 50 to 200 μf Capacitance tolerance J(±5%), U(-5 ~10%), K(±10%) Rectangular-shaped aluminium case Operating temperature range -25 ~ +85 at 70% U R -25 ~ +70 at 80% U R Storage Temperature range -25 ~ +85 Rated Voltage (UR) 900 to 1500VDC Voltage test between terminals (U TT) U R 1.5 VDC, 60sec Voltage test terminals to case U TC UR VAC, 60Hz, 60sec Insulation Resistance(Terminal to Case) Min 3000 MΩ at. 500VDC 1 Minute Dissipation Factor(Tanδ) 0.5% Max at.1khz.20 Terminals(permitted Torque) M6 10(4 ±0.5Nm) Stud Bolt(permitted Torque) M12 16/18(7 ±1Nm) Life Time Test UR 1.25 VDC,85,1000Hr Dielectric film Cap material Plastic Impregnants Epoxy Resin, UL 94 V-O class Case material Aluminium rectangular Humidity 40±20,90~95% 30days / year Life Expenctancy Charge and Discharge Cycles Current Endurance 500A, 30~90 μs, 100,000 Cycles Reference standard: IEC Standard Ratings and case size Rated Voltage(UR) : 1250VDC Capacitance Size (mm) Model No. ( μf ) A B C D 50 DMF-M125506K DMF-M125606K DMF-M125107K DMF-M125157K DMF-M125207K Rated Voltage(UR) : 1350VDC -25 ~ +60 at 100% U R High heat-resiatance Metallized Polypropylene Film Capacitance Size (mm) Model No. ( μf ) A B C D 50 DMF-M135506K DMF-M135606K DMF-M135107K DMF-M135157K DMF-M135207K B Marking A REV:0 SEP DAEDONG CAPACITOR CO., LTD.
39 DAL-K Un 1100V DC 1200 μf ±10% -40/+85 SH IEC 61071
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
01 How to order screw terminal type aluminum electrolytic capacitors. 02 VCG6A/ screw terminal type aluminum electrolytic capacitors
Catalog 01 How to order screw terminal type aluminum electrolytic capacitors 02 VCG6A/ screw terminal type aluminum electrolytic capacitors 05 VCG5A/ screw terminal type aluminum electrolytic capacitors
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Metalized Polyester Radial Leaded Film Capacitors
Metalized Polyester Radial eaded Film Capacitors uracap International, Inc P.O. Box 1579 Woodstock, Ontario N4 0A7 Canada Phone: (519) 539-4891 Fax: (519) 539-6684 http://www.duracap.com/ MPER% %Metallized%Polyester%/%Radial%eads%
Creative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Series AM2DZ 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to + 85 o C Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 82% Input / Output Isolation 1000,3000,
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Metallized Polypropylene Film Capacitors PCPW 246 ( DC-link application )
CONSTRUCTION ㆍDielectric ㆍCase ㆍFilling ㆍTerminals : Metallized Polypropylene film with segmented pattern : PBT (UL94 V-0) : Epoxy resin (UL94 V-0) : Tinned copper wire (2-pin / 4-pin) FEATURE ㆍHigh capacitance
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Axial Film Capacitors Metallized Polyester and Polypropylene
Axial Film Capacitors Metallized Polyester and Polypropylene... your source for the Ultimate in Reliability 1 Table of Contents Part Numbering System 2 Dielectric Characteristics 3 AREM 5 AFEO 6 AFPX 7
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Plastic Film Capacitors
Plastic Film Capacitors List of Contents 1. Product Symbol System for Plastic Film Capacitors 230 2. Cautions for Plastic Film Capacitors 231 3. Expected lifetime curve 231 4. Specifications for Plastic
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
SPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
NTC Thermistor:SCK Series
NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
15W DIN Rail Type DC-DC Converter. DDR-15 series. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
OWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC
Single Output Moistureproof Adaptor OWA-60E series IP67 Ⅱ Ⅱ moistureproof I File Name:OWA-60E-SPEC 0-04- Single Output Moistureproof Adaptor OWA-60E series SPECIFICATION MODEL OWA-60E- OWA-60E- OWA-60E-0
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
High Voltage Ceramic Capacitor (Radial Disc Type)
High Voltage Ceramic Capacitor (Radial Disc Type) 1. Material Characteristics Series No TEMP. CHAR. Working Temperature ( ) Insulation Resistance ( MΩ) 1 UJ -25~+85 100000 2 SL -25~+85 100000 Disspation
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
IXBH42N170 IXBT42N170
High Voltage, High Gain BIMOSFET TM Monolithic Bipolar MOS Transistor IXBH42N17 IXBT42N17 S 9 = 1 = 42A (sat) 2.8V Symbol Test Conditions Maximum Ratings TO-247 (IXBH) S = 25 C to 15 C 17 V V CGR = 25
Type C Aluminum Electrolytic, Screw Terminal Best Value 85 C High Capacitance Screw Terminal Type
Type 386 85 C Aluminum Electrolytic, Screw Terminal While Type 386 s standard encasement is by compression with the capacitor element captured on an aluminum peg in the can bottom and a phenolic peg in
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite