GENERAL PURPOSE TRANSFORMERS 2 Watt Pulse, Electrostatically Shielded, 500 mw Pulse, RF Pulse, and Control Transformers
|
|
- Δυσμάς Ουζουνίδης
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available in through hole and surface mount packages Electrical C Operating Temperature 0 C to 70 C Primary Primary Turns Rise PRI/SEC * Leakage Sine Wave ET- Inductance DCR DCR DCR Schematic/ Ratio Time Cww Primary Secondary Tertiary Hi-Pot Number OCL Constant PRI/SEC (Vrms) Package (±%) (ns MAX) (pf MAX) (Ω MAX) (Ω MAX) (Ω MAX) Style (mh MIN) (V-µs MIN) (µh MAX) WATT PULSE PE-7X : TH PE-8X : TH PE-3X : TH PE-90X : TH PE-9X :: TH PE-3X :: TH PE-7X :: TH ELECTROSTATICALLY SHIELDED PE-X : TH PE-X : TH PE-0X : TH PE-9X :: TH PE-8X CT:CT TH3 PE-3X CT:CT TH3 *NOTE: for Electrostatically Shielded Transformers, C ww is measured with shield corrected to guard voltage. Schematics TH TH TH3 TH TH WINDING WINDING WITH SHIELD 7 WINDING WITH CT AND SHIELD WITH SHIELD 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL FAX G008.A (8/97)
2 00 mw Pulse Number TH Turns Ratio (±%) 00 MW PULSE 3 Electrical 0º C Operating Temperature 0ºC to 70ºC Primary Primary Leakage Rise PRI/SEC DCR DCR DCR Schematic Sine Wave ET- Inductance Hi Pot Time Cww Primary Secondary Tertiary Package OCL Constant PRI/SEC Vrms (mh MIN) (V-µs MIN) (ns MAX) (pf MAX) (µh MAX) (Ω MAX) (Ω MAX) (Ω MAX) Style PE-70 :: TH PE-7 :: TH PE-7 :: TH PE-73 :: TH PE-7 :: TH PE-79 :: TH PE-870 CT:CT TH7 PE-87 CT:CT TH7 PE-87 CT:CT TH7 PE-87 CT:CT TH7 PE-877 CT:CT TH7 PE-0.: TH8 3Z8 :: dual TH9 Z03 :: TH Z :: TH PE-7M :: SM PE-73M :: SM PE-79M :: SM PE-87M CT:CT SM PE-87M CT:CT SM PE-877M CT:CT SM 3Z8SM :: dual SM3 3Z87SM :: SM NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-79MT). The "T" will appear on all paper work, but will not be marked on parts. TH7 Schematics TH8 TH WINDING WITH CT WINDING DUAL SM 3 SM SM WINDING WITH CT DUAL 0 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL TEL FAX FAX G008.A (8/97)
3 Watt Pulse, Electrostatically Shielded, and 00 mw Pulse Transformers TH to TH TH: WINDING Mechanicals TH/TH: WINDING WITH SHIELD OR TH3/TH: WINDING WITH CT AND SHIELD OR WITH SHIELD 7.0 MAX, CTRY ORIGIN 8.3 MAX,.00,70 7,.00 TYP.00,70 7, 7,.00,70.00 TYP 7, MAX 0,.00 MIN,70 # AWG SOLDERABLE LEADS.0 MIN 0, BOTTOM VIEWS Weight Number (Grams) Tube TH*/TH 3.9 TH3/TH. TH.0 *Except PE-90X. Unless otherwise specified, all tolerances are ±.00 0, TH to TH8 TH9.00 MAX,70 3 COUNTRY OF ORIGIN.00 MIN,70.30 MAX 8,89.0 MAX,3.070 MIN,78 # AWG SOLDERABLE LEADS TH8: WINDING 0, BOTTOM VIEWS Weight Number (Grams) TH/TH7: OR WINDING WITH CT 0,.00 Tube TH*.3 0/7* TH7 (PE-870, PE-87, PE-87). 0 TH7 (PE-87,PE-877).3 0 TH8. 0 *NOTE: TH (Z03/Z) Unless otherwise specified, all tolerances are ±.00 0, 3Z8 Date Code Country of Origin.800 0,3.08 TYP 0,.8 7,.0 MIN 0,38.00 TYP.00 ±.00, 0,. ±.00 3,8.0,.0 MAX,3.30 ±.00 8, 0, Weight....g Tube... 8/tube Unless otherwise specified, all tolerances are ±.00 0,3 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL FAX G008.A (8/97)
4 Watt Pulse, Electrostatically Shielded, and 00 mw Pulse Transformers SM & SM. 0, 300 7, (except 3Z87SM) 7, PE-XXXXSM CNTRY OF ORIGIN.00 TYP.0 0,.90 7,37.070, ,9 Mechanicals 3Z87SM.08 TYP 0, 3Z87SM Date Code Country of Origin.30, ,7.00.,73.0,0.070,78 0,.00 TYP,7.00/.0 0,/0, , 0-8 Unless otherwise specified, all tolerances are ±.00 0,.00/0,0 SURFACES.08/.00 TYP 0,/0,.00,0 Weight (Grams) Tape & Reel.00/.00 0,3/0, Tube SM SM: PE-87M PE-87M PE-877M Except 3Z87SM TYP,7.00 MIN 0,.30 9, Unless otherwise specified, all tolerances are ±.00 0,3 SM , ,7.0,0 0, 3Z8SM Date Code Country of Origin.0,3.08 TYP 0,.00 TYP,7 7,.,73., 0-8 Weight g Tube... 0/tube Tape & Reel... 70/reel.00/.00 0,3/0,.00 TYP,7 7,.00 MIN 0,.30 9, Unless otherwise specified, all tolerances are ±.00 0,3 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL TEL FAX FAX G008.A (8/97)
5 RF Pulse Designed for use in 0 Ω Wideband IC applications Characterized for Pulse and wide band use at 0 Ω impedance Standard -pin DIP package or ThinSet surface mount package Number SURFACE MOUNT* Turns Ratio (±%) Primary Primary PRI/SEC Bandwidth Schematic/ Pulse ET- PRI/SEC Leakage Primary Secondary for -3 db Loss Package Inductance Constant Cww Inductance DCR DCR Low Freq High Freq Style (µh MIN) (v-µs MIN) (pf MAX) (µh MAX) (Ω MAX) (Ω MAX) (MHz) (MHz) PE-7 CT:CT A / SMT PE-9 CT:CT A / SMT 3Z7SMD :CT B / SMT THROUGH HOLE Electrical C Operating Temperature 0 C to 70 C PE-A : C / TH0 PE-A CT:CT D / TH0 PE-0A :CT B / TH0 PE-A : CT B / TH0 PE-A :CT B / TH0 *NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-7T). The "T" will appear on all paper work, but will not be marked on parts. Schematics A B C D WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL FAX G008.A (8/97)
6 RF Pulse SMT.30 MAX 8,.8 7, COUNTRY OF ORIGIN ,0 MAX.0,0 MAX.00/0,3 Surfaces Mechanicals.00,.00,7.,7.00 PE-7 PE-9 Weight grams grams Tube... 0/tube... 0/tube Tape & Reel... 00/reel... 00/reel Unless otherwise specified, all tolerances are ±.00 0, SMT.030 0,7.080,03 TH0.08 TYP 0,.0,0 0, COUNTRY OF ORIGIN.7 MAX,99 3Z7SMD Date Code Country of Origin 7,.,73.00 TYP.30 9,.00 TYP 3 MAX 7,. MAX,.0,33.00/.00 0,3/0,.00 TYP 0, Weight grams Tube... 7/tube Tape & Reel... 70/reel Unless otherwise specified, all tolerances are ±.00 0, ,30 MIN 7,.30 MAX 8,89 Weight grams Tube... /tube Unless otherwise specified, all tolerances are ±.00 0, 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL TEL FAX FAX G008.A (8/97)
7 Control Transformers Recognized component Underwriter s Laboratories, Inc. High dielectric strength capability for industrial applications High ET product allows long pulse width Number Electrical C Operating Temperature 0 C to 70 C Turns Primary Sine Primary PRI/SEC PRI/SEC Primary Secondary Hi Pot* Schematic/ Ratio Wave OCL ET-Constant Cww Leakage DCR DCR PRI/SEC Package (±0%) (mh MIN) (V-µs MIN) (pf MAX) Inductance (Ω MAX) (Ω MAX) (Vrms) Style PE-00 : A/TH PE-003 : A/TH PE-00 :: A/TH PE-007 :: A/TH PE-008 :: A/TH PE-0 : B/TH PE-0 : B/TH PE-07 : B/TH PE-08 : B/TH PE-09 :: B/TH PE-03 :: B/TH *NOTE: PE-00 PE-03 Hi Pot SEC/SEC 300 Vrms. Average Power Rating: Watts. UL-78 Recognized, File Number E. Schematics A B 3 WINDING 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL FAX G008.A (8/97)
8 Control Transformers Mechanicals TH.70 MAX 9,0 WINDING 0, 3 CNTRY OF ORIGIN.70 MAX 9,0.00,.00, BOTTOM VIEWS.00 MAX,70.00 MIN, ,0 TH0 Except PE-003 Weight grams grams Tube... /tube... /tube Unless otherwise specified, all tolerances are ±.00 0, TH WINDING 3 CNTRY OF ORIGIN.90 MAX 3,87 0,.77 MAX 9,8.00,70 BOTTOM VIEWS.00,70 For More Information : Corporate 0 World Trade Drive San Diego, CA 98 Tel: FAX: Quick-Facts: MAX 0,8.00 MIN,70.00 MIN 0,0 Europe Millpool House Mill Lane, Godalming Surrey GU7 EY U.K. Tel: FAX: 83 0 Weight Number (Grams) PE-0 PE-0 PE-07 PE-08 Tube PE PE Unless otherwise specified, all tolerances are ±.00 0, Asia P.O. Box -, KEPZ Central Sixth Road KEPZ, Kaohsiung Taiwan, R.O.C. Tel: FAX: Distributor Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. 997, Pulse Engineering, Inc. G008.A (8/97)
POWER OVER ETHERNET (PoE) MAGNETICS
RoHS-5 peak reflow temperature rating 35 C RoHS-6 peak reflow temperature rating 45 C IEEE 80.3af/ANSI X3.63 compliant performance Designed for IP phone or switch applications Electrical Specifications
Διαβάστε περισσότεραLAN ISOLATION TRANSFORMER CATALOG
LAN ISOLATION TRANSFORMER CATALOG TABLE of CONTENTS ISOLATION TRANSFORMERS 10BASE-T FOR ADAPTER CARDS, MAUs, HUBS AND MOTHERBOARD APPLICATIONS Electrical Specifications: Surface Mount and Through Hole................................
Διαβάστε περισσότεραT1/CEPT/ISDN-Pri Transformers
IRELESS I sales@eddywireless.com T//ISDN-Pri Transformers Dual SMT package Isolation voltage: 00 Vrms For - part add suffix NLE For - part add suffix NL For detail of Compliance,please refer to Page 00//EC
Διαβάστε περισσότεραPRELIMINARY DATA SHEET NPN EPITAXIAL SILICON TRANSISTOR FOR MICROWAVE HIGH-GAIN AMPLIFICATION
PRELIMINARY DATA SHEET NPN EPITAXIAL SILICON TRANSISTOR FOR MICROWAVE HIGH-GAIN AMPLIFICATION NE699M FEATURES OUTLINE DIMENSIONS (Units in mm) HIGH ft: 6 GHz TYP at V, ma LOW NOISE FIGURE: NF =. db TYP
Διαβάστε περισσότεραNPN SILICON OSCILLATOR AND MIXER TRANSISTOR
FEATURES NPN SILICON OSCILLATOR AND MIXER TRANSISTOR LOW COST HIGH GAIN BANDWIDTH PRODUCT: ft = MHz TYP LOW COLLECTOR TO BASE TIME CONSTANT: CC r b'b = 5 ps TYP LOW FEEDBACK CAPACITANCE: CRE=.55 pf TYP
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραGearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότερα3 V, 900 MHz LOW NOISE SI MMIC AMPLIFIER
V, 9 MHz LOW NOISE SI MMIC AMPLIFIER UPC78T FEATURES.8 db NOISE FIGURE LOW VOLTAGE - LOW CURRENT: ma at V LOW POWER CONSUMPTION: 8 mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION
Διαβάστε περισσότερα3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER
V, MHz Si MMIC WIDEBAND AMPLIFIER UPC7T FEATURES WIDE FREQUENCY RESPONSE: MHz LOW VOLTAGE OPERATION: V NOMINAL (. MIN) LOW POWER CONSUMPTION:. mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION
Διαβάστε περισσότεραTransient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
Διαβάστε περισσότερα3 V, 900 MHz Si MMIC AMPLIFIER
V, 9 MHz Si MMIC AMPLIFIER UPC77T FEATURES LOW VOLTAGE - LOW CURRENT: ma at V LOW POWER CONSUMPTION: mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION The UPC77T is a Silicon
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότεραSURFACE MOUNT NPN SILICON HIGH FREQUENCY TRANSISTOR
FEATURES HIGH GAIN BANDWIDTH PRODUCT: ft of LOW VOLTAGE/LOW CURRENT OPERATION HIGH INSERTION POWER GAIN: SE = db @ V, 7 ma, GHz SE = db @ V, ma, GHz LOW NOISE:. db AT. GHz AVAILABLE IN SIX LOW COST PLASTIC
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότερα2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER
. GHz SILICON MMIC WIDE-BAND AMPLIFIER UPC79T FEATURES WIDE FREQUENCY RESPONSE:. GHz 3 GAIN vs. FREQUENCY HIGH GAIN: 3 db (UPC79T) SATURATED OUTPUT POWER: +. dbm (UPC79T) INTERNAL CURRENT REGULATION MINIMIZES
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότερα1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραSunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραSunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραTransient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Διαβάστε περισσότεραT1/E1/CEPT/ISDN-PRI DUAL & SINGLE CORE THRU-HOLE TRANSORMERS
TECEPTISDN-PRI DUAL & SINGLE CORE THRU-HOLE TRANSORMERS * For TCEPT Telecommunications Applications * Low Profile s * Designed to Meet CCITT and FCC requirments * 500Vrms Minimum Isolation * Designed for
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραHigh Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραBluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C
W8 Datasheet version.7. ceramic antenna. (/) Ground cleared under antenna, clearance area 4. x 4.5/6.5 mm. Pulse Part Number W8, W8C Features - Omni directional radiation - Low profile - Compact size W
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραSAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραCal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Διαβάστε περισσότεραUnshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραChip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραRoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραLow Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραNPN SILICON GENERAL PURPOSE TRANSISTOR
NPN SILICON GENERAL PURPOSE TRANSISTOR NE74 SERIES FEATURES LOW NOISE FIGURE: < db at 00 MHz HIGH GAIN: db at 00 MHz HIGH GAIN BANDWIDTH PRODUCT: GHz ( GHz for the ) SMALL COLLECTOR CAPACITANCE: pf HIGH
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραRating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition
MA MA Series Silicon planer e For stabilization of power supply ø.56. Unit : mm Features Color indication of VZ rank classification High reliability because of combination of a planer chip and glass seal
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Διαβάστε περισσότεραAVX SMD Power Inductors
AVX SMD Power Inductors www.avx.com Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: 0.47-470 μh Rated Current: 0.53-30 A LMXN Series
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραSymbol. Parameter Value Unit. IPP See Next Table A IFSM
5W Transient Suppressor.5KE-HF Series Stand-off : 6.8 ~ 6V Power Dissipation: 5 Watts RoHS Device Halogen Free Features -Glass passivated chip. -Low leakage. -5W peak pulse power capability with a /μs
Διαβάστε περισσότεραI. Product Selection Guide IV. SMT Balun Transformers 0303 & 0604 Series...161
Inductive Components w w w. b o u r n s. c o m I. Product Selection Guide...15 II. Line Matching Models LM-NP/LP-1000 Series...156 SM-LP-5001 Series...158 III. Wideband RF Transformers RF2/RF3/RF Series...159
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραNPN Silicon RF Transistor BFQ 74
NPN Silicon RF Transistor BFQ 74 For low-noise amplifiers in the GHz range, and broadband analog and digital applications in telecommunications systems at collector currents from 1 ma to 25 ma. Hermetically
Διαβάστε περισσότεραMZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit
MZ.GEV- THRU MZ.GEV-. MZ.GF SERIES MZ.GEV THRU MZ.GEV TECHHICAL SPECIFICATION FEATURES Silicon Planar Power Diodes Standard Voltage Tolerance is ±% DO- Glass Case High Reliability Weight: Approx..g DO-
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραHigh Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Διαβάστε περισσότεραMULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότερα