Offshore (IEC) 1/2013



Σχετικά έγγραφα
FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN

Screened electronic cable LiYCY

Control cable YSLY-JZ/-JB/-OZ/-OB

Screened electronic cable LiYCY

Product Catalog NEK 606/BFOU/RFOU/BU/RU. Marine, oil, gas and offshore cables

Data/LAN Cables Cat 6 F/UTP PVC

CHAROONG THAI WIRE & CABLE PUBLIC COMPANY LIMITED

FLAME RETARDANT POWER CABLE. 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY. Application Standard

OFFSHORE CABLES GENERAL CATALOGUE. Offshore Cables. technergy INTEGRATED CABLING SOLUTIONS

FRNC power cable Cu/XLPE/ LSZH/SWA/LSZH acc. to BS 6724

Outer diameter (mm) ca.

B37631 K K 0 60

Thin Film Chip Resistors

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

Aluminum Electrolytic Capacitors (Large Can Type)

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

Aluminum Electrolytic Capacitors

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

THICK FILM LEAD FREE CHIP RESISTORS

Halogen free Shipboard Cable IEC , 353, 354, 376

Applications Coaxial cables for high frequency. Coaxial cables from 50 Ω to 95 Ω. Construction

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors

Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH

Multilayer Chip Capacitors C0G/NP0/CH

± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.

Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15

Magnet Wire General Engineering Data Bare and Film Insulated Copper and Aluminum

FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS

4 Way Reversing Valve

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

Multilayer Chip Inductor

SMD Power Inductor-VLH

Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)

DATA SHEET Surface mount NTC thermistors. BCcomponents

Thin Film Chip Resistors

RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type

4. Construction. 5. Dimensions Unit mm

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

Thin Film Chip Resistors

SMD Power Inductor-VLH

RC series Thick Film Chip Resistor

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008

QFLC R0 K - D

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

Lowara SPECIFICATIONS

Pipe E235N (St 37.4 NBK) phosphated and oiled

Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead

BMA SERIES Subminiature Blind Mate Connectors

LR Series Metal Alloy Low-Resistance Resistor

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

NMBTC.COM /

Carbon Film Leaded Resistor

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)

DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue

LR Series Metal Alloy Low-Resistance Resistor

Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en

PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current

RSDW08 & RDDW08 series

Surface Mount Aluminum Electrolytic Capacitors

DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE

YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.

Fixed Inductors / AL TYPE

4 Way Reversing Valve

High Current Chip Ferrite Bead MHC Series

Aluminum Capacitors C, Tubular, Radial Lead

RF series Ultra High Q & Low ESR capacitor series

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage

Interference Suppression Capacitor

LR(-A) Series Metal Alloy Low-Resistance Resistor

Polymer PTC Resettable Fuse: KRG Series

Metal Film Leaded Precision Resistor

DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.

UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:

Applications Water distribution

Fixed Inductors / AL TYPE

Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of

Bulletin 1489 UL489 Circuit Breakers

DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE

Ferrite Chip Beads For Automotive Use

Thermistor (NTC /PTC)

65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC

E62-TAB AC Series Features

Metal Oxide Leaded Film Resistor

± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:

Low Value Multilayer Inductors (LMCI Series)

QUICKTRONIC PROFESSIONAL QTP5

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices

Melf Carbon Film Resistor MMC Series

Thin Film Chip Inductor

SMC SERIES Subminiature Coaxial Connectors

Transcript:

Offshore (IEC) 1/2013

Contents 0,6/1kV cables LKM-SHF2 & LKM-SHF2 FLEX...4 LKMM-SHF2...8 LKSM-SHF2 & LKSM-SHF2 FLEX...10 LKMSM-SHF2...14 LKSM-EMC-SHF2...16 LKSM-VFD-SHF2...20 0,6/1kV FR cables LKM-FRSHF2...22 LKSM-FRSHF2...24 250V cables LKSM-SHF2...26 RFE-SHF2...28 RFE-SHF2 (i)...30 250V FR cables RFE-FRSHF2...32 RFE-FRSHF2 (i)...34 Technical information General information...36 Bending radius...37 Diameter tolerance...37 Core identification...37 Current rating...38 Short circuit current...39 Short circuit factors...39 Short time duty...40 Voltage drop...41 Subject to change without prior notice. See latest updates on our webpage www.helkamabica.fi

Helkama is specializing in the development and production of marine and offshore cables. By using the latest technology and advanced materials our offshore cables are light in weight, small in diameter and flexible, quick and easy to install. In this catalogue we present our IEC standard range of offshore cables. Our product range includes the standard flameretardant and oil resistant version as well as a fire resistant version. Our offshore cables are intended for any type of offshore application such as FPO, FPSO, Drilling ship, Topside, FSU etc. The only exception is areas where mud resistant cables are required. This part is covered by our NEK606 product range, which is presented in a separate catalogue. As a specialized and independent company, focusing on service, we have been able to grow steadily by quickly responding to our customers needs. Our short delivery times, backed up by extensive stocks, enable us to deliver punctually and keep our customers satisfied.

40,6/1kV CABLES LKM-SHF2 and LKM-SHF2 FLEX Unarmoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor 1,0-10 2 IEC 60228, class 2 - stranded copper conductor 16-300 2 IEC 60228, class 5 (Flex) - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - separator tape 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

5 LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 425580 428395 1x1,0 5,0 30 18 20 425636 428396 1x1,5 5,5 40 23 25 425638 427000 1x2,5 5,5 50 30 25 425640 427002 1x4 6,5 70 40 30 425642 427004 1x6 7,0 95 52 30 425644 427006 1x10 8,0 140 72 35 425647 427009 1x16 Flex 9,0 185 94 40 425649 427011 1x25 Flex 11,5 285 123 50 425651 427013 1x35 Flex 12,5 380 153 50 425653 427015 1x50 Flex 14,5 530 196 60 425655 427017 1x70 Flex 17,0 740 240 70 425657 427019 1x95 Flex 19,5 965 284 80 425659 427021 1x120 Flex 21,5 1210 331 90 425661 427023 1x150 Flex 24,5 1530 381 100 425663 427025 1x185 Flex 27,0 1860 429 165 425665 427027 1x240 Flex 30,5 2475 507 185 426047 427029 1x300 Flex 33,0 3035 582 200 425581 2x1,0 7,5 60 15 30 425670 2x1,5 8,5 75 20 35 425686 2x2,5 9,5 110 26 40 425702 2x4 10,5 150 34 45 425701 2x6 12,0 230 44 50 425717 2x10 14,0 350 61 60 426054 2x16 Flex 16,5 475 80 70 426055 2x25 Flex 20,5 735 105 85 426056 2x35 Flex 23,0 1005 130 95 426057 2x50 Flex 27,5 1410 167 170 426058 2x70 Flex 31,5 1940 204 190 425582 428397 3x1,0 8,0 75 13 35 425671 425672 3x1,5 9,0 100 16 40 425688 425689 3x2,5 10,0 140 21 45 425703 425704 3x4 11,5 195 28 50 425705 425706 3x6 13,0 300 36 55 425707 425708 3x10 15,0 450 50 65 426071 426072 3x16 Flex 17,5 610 66 75 426073 426074 3x25 Flex 22,0 945 86 90 426075 426076 3x35 Flex 25,0 1295 107 100 426077 426078 3x50 Flex 29,5 1840 137 180 426079 426080 3x70 Flex 34,5 2560 168 210 426081 426082 3x95 Flex 40,0 3385 199 240 426083 426085 3x120 Flex 44,5 4280 232 270 426084 426086 3x150 Flex 50,5 5380 267 305 426087 426088 3x185 Flex 57,0 6665 300 345 426089 426090 3x240 Flex 64,5 8870 355 390 0,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page

1/2013 60,6/1kV CABLES LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 425583 428398 4x1,0 8,5 95 13 35 425673 425674 4x1,5 10,0 130 16 40 425690 425691 4x2,5 11,0 175 21 45 425725 425726 4x4 12,5 255 28 55 425727 425728 4x6 14,0 375 36 60 425729 425730 4x10 16,5 575 50 70 426101 426102 4x16 Flex 19,5 785 66 80 426103 426104 4x25 Flex 24,5 1230 86 100 426105 426106 4x35 Flex 27,5 1665 107 170 426107 426108 4x50 Flex 33,0 2375 137 200 426109 426110 4x70 Flex 38,0 3290 168 230 426111 426112 4x95 Flex 44,5 4385 199 270 426113 426114 4x120 Flex 49,5 5500 232 300 425584 428399 5x1,0 9,5 120 10 40 425676 425677 5x1,5 11,0 160 13 45 425692 425693 5x2,5 12,0 215 17 50 425864 425865 5x4 13,5 310 23 55 425866 425867 5x6 15,5 465 30 65 425868 425869 5x10 18,5 705 42 75 426131 426132 5x16 Flex 21,5 955 55 90 426133 426134 5x25 Flex 27,5 1515 71 165 426135 426136 5x35 Flex 30,5 2065 89 185 426137 426138 5x50 Flex 37,0 2930 114 225 426139 426140 5x70 Flex 42,5 4110 139 260 425585 428400 7x1,0 10,5 150 9 45 425586 428401 10x1,0 13,5 215 8 55 425587 428402 12x1,0 13,5 245 8 55 425588 428403 14x1,0 14,5 275 7 60 425589 428404 16x1,0 15,5 315 7 65 425590 428405 19x1,0 16 360 7 65 425592 428407 24x1,0 19 455 6 80 425593 428408 27x1,0 19,5 500 6 80 425597 428409 30x1,0 20 545 5 85 425595 428411 37x1,0 22 670 5 90 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

7 LKM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 425678 425679 7x1,5 11,5 200 12 50 425667 425668 10x1,5 15,0 290 11 60 425680 425681 12x1,5 15,5 335 10 65 425991 425992 14x1,5 16,5 380 10 70 425989 425990 16x1,5 17,0 430 9 70 425682 425683 19x1,5 18,5 495 9 75 425875 425876 24x1,5 22,0 635 8 90 425684 425685 27x1,5 22,0 700 8 90 425675 425687 37x1,5 25,0 920 7 100 425694 425695 7x2,5 13,5 285 16 55 425993 425994 10x2,5 17,0 410 14 70 425696 425874 12x2,5 17,5 465 13 70 425995 425996 14x2,5 18,5 535 13 75 425997 425998 16x2,5 19,5 605 12 80 425873 425872 19x2,5 20,5 690 11 85 425877 425878 24x2,5 24,5 900 10 100 426141 426142 27x2,5 25,0 990 10 155 0,6/1kV CABLES 1/2013

80,6/1kV CABLES LKMM-SHF2 Unarmoured power cable with extruded filler 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor 1,5-10 2 IEC 60228, class 2 - stranded copper conductor 16-150 2 IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - extruded filler 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour black Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

9 LKMM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 427532 2x1,5 9,0 110 20 35 427534 2x2,5 10,0 155 26 40 427536 2x4 11,0 205 34 45 427538 2x6 12,5 285 44 50 427540 2x10 14,5 420 61 60 427543 2x16 18,5 630 80 75 427545 2x25 23,0 970 105 90 427547 2x35 25,5 1340 130 155 427549 2x50 30,0 1855 167 180 427551 2x70 34,0 2510 204 205 427564 427566 3x1,5 9,5 130 16 35 427568 427570 3x2,5 10,5 180 21 45 427572 427574 3x4 12,0 245 28 45 427576 427578 3x6 13,5 350 36 55 427580 427582 3x10 15,5 515 50 60 427585 427587 3x16 20,0 770 66 80 427589 427591 3x25 24,5 1170 86 100 427593 427595 3x35 27,0 1600 107 160 427597 427599 3x50 32,0 2220 137 190 427601 427603 3x70 37,0 3090 168 220 427605 427607 3x95 42,5 4055 199 255 427609 427611 3x120 47,0 5070 232 285 427613 427615 3x150 53,5 6425 267 320 427628 427630 4x1,5 10,5 165 16 40 427632 427634 4x2,5 11,5 215 21 45 427636 427638 4x4 13,0 305 28 50 427640 427642 4x6 14,5 420 36 60 427644 427646 4x10 17,5 635 50 70 427649 427651 4x16 21,5 935 66 85 427653 427655 4x25 27,0 1440 86 160 427657 427659 4x35 30,0 1955 107 180 427661 427663 4x50 35,5 2735 137 210 427665 427667 4x70 40,5 3790 168 245 427692 427694 5x1,5 11,5 195 13 45 427696 427698 5x2,5 12,5 255 17 50 427700 427702 5x4 14,5 360 23 55 427704 427706 5x6 16,5 515 30 60 427708 427710 5x10 19,0 770 42 75 427713 427715 5x16 24,0 1145 55 95 427717 427719 5x25 29,5 1750 71 175 0,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5

10 0,6/1kV CABLES LKSM-SHF2 and LKSM-SHF2 FLEX Armoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - stranded copper conductor 16-300 2 IEC 60228, class 5 (Flex) - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - filler tape 4. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

11 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 425955 428425 1x1,0 3,0 6,0 65 18 40 425736 428426 1x1,5 3,0 6,5 75 23 40 425738 427050 1x2,5 3,1 7,0 85 30 45 425740 427052 1x4 3,1 7,5 105 40 45 425742 427054 1x6 3,1 8,0 125 52 50 425744 427056 1x10 3,5 9,5 185 72 60 426237 427058 1x16 Flex 4,1 10,5 235 94 65 426238 427060 1x25 Flex 4,9 13,0 355 123 80 426239 427062 1x35 Flex 5,5 14,0 455 153 90 426240 427064 1x50 Flex 8,7 17,0 640 196 105 426241 427066 1x70 Flex 11,4 19,0 875 240 115 426242 427068 1x95 Flex 11,5 21,5 1100 284 130 426243 427070 1x120 Flex 14,5 23,5 1390 331 145 426244 427072 1x150 Flex 14,7 26,5 1705 381 160 426245 427074 1x185 Flex 15,2 29,0 2045 429 180 426246 427076 1x240 Flex 18,2 32,5 2690 507 200 426247 427078 1x300 Flex 18,7 35,5 3270 582 215 425956 2x1,0 3,6 9,0 105 15 55 425770 2x1,5 3,8 9,5 125 20 60 425785 2x2,5 4,3 10,5 155 26 65 425801 2x4 4,9 12,0 205 34 75 425803 2x6 5,4 13,0 305 44 80 425805 2x10 8,7 15,5 465 61 95 426254 2x16 Flex 10,0 18,0 605 80 110 426255 2x25 Flex 14,5 23,0 955 105 140 426256 2x35 Flex 14,7 25,5 1205 130 155 426257 2x50 Flex 18,1 29,5 1655 167 180 426258 2x70 Flex 18,7 34,0 2210 204 205 425957 428427 3x1,0 3,7 9,5 125 13 60 425772 425773 3x1,5 4,1 10,0 150 16 65 425786 425787 3x2,5 4,6 11,0 190 21 70 425802 425880 3x4 5,2 12,5 255 28 80 425804 425882 3x6 5,8 14,0 360 36 85 425806 425884 3x10 9,3 16,5 555 50 100 426271 426272 3x16 Flex 10,7 19,0 735 66 115 426273 426274 3x25 Flex 14,6 24,5 1140 86 150 426275 426276 3x35 Flex 15,0 27,0 1475 107 165 426277 426278 3x50 Flex 18,3 32,0 2060 137 195 426279 426280 3x70 Flex 22,0 36,5 2795 168 220 426281 426282 3x95 Flex 22,8 42,0 3620 199 255 426283 426284 3x120 Flex 37,8 47,0 4655 232 285 426285 426286 3x150 Flex 39,3 53,0 5780 267 320 426287 426288 3x185 Flex 47,9 59,5 7130 300 360 0,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page

12 0,6/1kV CABLES 1/2013 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 42598 428428 4x1,0 4,1 10,0 145 13 65 425774 425775 4x1,5 4,5 11,0 175 16 70 425788 425789 4x2,5 5,0 12,5 235 21 75 425830 425831 4x4 5,8 13,5 310 28 85 425832 425833 4x6 8,8 15,5 465 36 95 425834 425835 4x10 10,3 18,0 680 50 110 426301 426302 4x16 Flex 11,9 21,0 930 66 130 426303 426304 4x25 Flex 14,8 27,0 1415 86 165 426305 426306 4x35 Flex 18,1 29,5 1870 107 180 426307 426308 4x50 Flex 19,5 35,5 2595 137 215 426309 426310 4x70 Flex 22,6 40,0 3540 168 245 426311 426312 4x95 Flex 37,8 47,0 4780 199 285 426313 426314 4x120 Flex 39,3 52,0 5925 232 315 426315 426316 4x150 Flex 48,2 59,0 7455 267 355 425959 428429 5x1,0 4,5 10,5 170 10 65 425776 425777 5x1,5 5,0 12,0 215 13 75 425790 425791 5x2,5 5,6 13,5 280 17 80 426011 426012 5x4 8,6 15,0 400 23 95 426013 426014 5x6 9,7 17,0 550 30 105 426015 426016 5x10 11,5 20,0 815 42 120 426331 426332 5x16 Flex 13,2 23,0 1055 55 140 426333 426334 5x25 Flex 18,1 29,5 1635 71 180 425960 428430 7x1,0 4,9 11,5 210 9 75 425961 428431 10x1,0 8,7 15 310 8 90 425962 428432 12x1,0 9 15 340 8 95 425963 428433 14x1,0 9,4 16 375 7 100 425964 428434 16x1,0 11,4 17 435 7 105 425965 428435 19x1,0 11,4 17,5 480 7 110 425977 428437 24x1,0 12,5 20,5 595 6 125 425978 428438 27x1,0 12,8 21 645 6 130 425981 428441 37x1,0 14,4 23,5 825 5 145 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Table continues on next page Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

13 LKSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C 425778 425779 7x1,5 5,4 13,0 260 12 80 426025 426026 10x1,5 9,6 16,5 385 11 100 425780 425846 12x1,5 9,9 17,0 430 10 105 426027 426028 14x1,5 10,5 18,0 480 10 110 426030 426029 16x1,5 11,5 19,0 535 9 115 425782 425781 19x1,5 11,7 19,5 600 9 120 425828 425829 24x1,5 13,9 23,5 765 8 140 425783 425847 27x1,5 14,1 24,0 830 8 145 425784 425848 37x1,5 16,0 26,5 1065 7 160 425792 425793 7x2,5 8,5 15,0 375 16 90 426033 426034 10x2,5 11,5 18,5 525 14 115 425794 425795 12x2,5 11,5 19,0 580 13 115 426035 426036 14x2,5 11,8 20,5 670 13 125 426037 426038 16x2,5 12,5 21,5 745 12 130 425796 425797 19x2,5 13,2 22,5 840 11 135 425798 425799 24x2,5 15,7 26,0 1065 10 160 425768 425769 27x2,5 16,1 27,0 1160 10 165 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 Min. bending radius fixed installation 0,6/1kV CABLES 1/2013

14 0,6/1kV CABLES LKMSM-SHF2 Armoured power cable with extruded filler 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor 1,5-10 2 IEC 60228, class 2 - stranded copper conductor 16-150 2 IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 Oil resistant 3. Bedding Flameretardant - extruded filler Fireresistant 4. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request Halogenfree 5. Sheath Low smoke - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 emission - standard colour black Application: For fixed installation in most areas and on open deck in ships. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

15 LKMSM-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 427232 2x1,5 4,9 11,5 195 20 70 427234 2x2,5 5,4 12,5 230 26 75 427236 2x4 6,0 14,0 290 34 85 427238 2x6 9,1 15,5 425 44 90 427240 2x10 10,7 17,5 580 61 105 427243 2x16 12,4 20,0 740 80 120 427245 2x25 15,4 24,5 1085 105 145 427247 2x35 17,1 27,0 1400 130 160 427249 2x50 20,2 31,0 1895 167 190 427264 427266 3x1,5 5,1 12,0 220 16 75 427268 427270 3x2,5 5,7 13,5 275 21 80 427272 427274 3x4 6,4 14,5 345 28 85 427276 427278 3x6 9,7 16,0 495 36 95 427280 427282 3x10 11,4 18,5 685 50 110 427285 427287 3x16 13,2 21,0 885 66 125 427289 427291 3x25 16,4 26,0 1320 86 155 427293 427295 3x35 18,2 28,5 1710 107 170 427297 427299 3x50 21,9 33,5 2345 137 200 427301 427303 3x70 25,4 38,5 3200 168 230 427305 427307 3x95 40,6 45,0 4270 199 270 427309 427311 3x120 44,8 49,0 5235 232 295 427313 427315 3x150 51,7 55,5 6610 267 335 427328 427330 4x1,5 5,6 13,0 260 16 80 427332 427334 4x2,5 6,3 14,0 320 21 85 427336 427338 4x4 9,5 16,0 430 28 95 427340 427342 4x6 10,6 17,5 590 36 105 427344 427346 4x10 12,5 20,0 830 50 120 427349 427351 4x16 14,5 23,0 1085 66 140 427353 427355 4x25 18,2 28,5 1605 86 170 427357 427359 4x35 20,2 31,5 2105 107 190 427361 427363 4x50 24,1 37,0 2875 137 220 427365 427367 4x70 45,7 43,0 4120 168 260 427369 427371 4x95 45,0 49,0 5245 199 295 427373 427375 4x120 51,2 55,0 6575 232 330 427392 427394 5x1,5 6,1 14,0 300 13 85 427396 427398 5x2,5 9,2 15,5 395 17 95 427400 427402 5x4 10,4 17,0 510 23 105 427404 427406 5x6 11,8 19,0 690 30 115 427408 427410 5x10 13,8 22,0 985 42 130 427413 427415 5x16 16,0 25,5 1300 55 152 427417 427419 5x25 20,1 31,0 1925 71 185 0,6/1kV CABLES 1/2013 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5

16 0,6/1kV CABLES LKSM-EMC-SHF2 Armoured power and control cable with improved EMC screening 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor 1,0-10 2 IEC 60228, class 2 - stranded copper conductor 16-150 2 IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - filler tape 4. Screen - copper tape, coverage 100% 5. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Design to meet requirements for improved EMC screening properties. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Transfer impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) Oil resistance IEC 60811-2-1 conditions according to 60092-359 For details see general information section Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: See technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

17 LKSM-EMC-SHF2 0,6/1kV Part number Normal Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 426904 1x1,0 3,0 6,0 95 18 25 427513 1x1,5 3,0 6,5 100 23 30 427514 1x2,5 3,0 7,0 115 30 30 427515 1x4 3,1 7,5 130 40 30 427516 1x6 3,1 8,0 155 52 35 427517 1x10 3,3 9,5 210 72 40 427518 1x16 4,2 11,0 270 94 45 427519 1x25 4,9 13,0 390 123 55 427520 1x35 5,6 14,5 495 153 60 427521 1x50 8,7 17,0 685 196 70 427522 1x70 9,9 19,0 915 240 80 427523 1x95 11,5 21,5 1160 284 90 427524 1x120 12,4 24,0 1435 331 100 427525 1x150 14,7 26,5 1775 381 160 426905 2x1,0 3,3 9,5 120 15 40 427480 2x1,5 3,6 10,0 135 20 40 427481 2x2,5 4,1 10,5 165 26 45 427482 2x4 4,6 12,0 235 34 50 427483 2x6 5,1 13,0 325 44 55 427484 2x10 8,5 16,0 510 61 65 427485 2x16 11,4 18,5 695 80 75 427486 2x25 12,4 23,0 1000 105 95 427487 2x35 14,7 25,5 1275 130 155 426906 426988 3x1,0 3,6 9,5 145 13 40 426861 426862 3x1,5 3,8 10,5 165 16 45 426863 426864 3x2,5 4,3 11,5 205 21 50 426865 426866 3x4 5,0 12,5 275 28 55 426867 426868 3x6 5,6 14,0 385 36 60 426869 426870 3x10 8,9 16,5 605 50 70 426872 426851 3x16 10,9 19,5 805 66 80 426874 426852 3x25 14,6 24,5 1205 86 100 426876 426853 3x35 15,1 27,0 1545 107 165 426878 426854 3x50 18,3 32,0 2145 137 195 426880 426855 3x70 22,0 36,5 2895 168 220 426882 426856 3x95 22,9 42,0 3735 199 255 426884 426857 3x120 37,9 47,0 4790 232 285 426886 426858 3x150 39,4 53,0 5925 267 320 0,6/1kV CABLES 1/2013 Table continues on next page

18 0,6/1kV CABLES 1/2013 LKSM-EMC-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 426907 426989 4x1,0 3,8 10,5 165 13 45 426942 426943 4x1,5 4,3 11,0 195 16 45 426944 426945 4x2,5 4,7 12,5 250 21 50 426946 426947 4x4 5,5 13,5 330 28 55 426948 426949 4x6 8,5 15,5 490 36 65 426950 426951 4x10 9,9 18,5 735 50 75 426952 426953 4x16 12,0 22,0 990 66 90 426954 426955 4x25 14,8 27,0 1470 86 165 426956 426957 4x35 18,2 29,5 1925 107 180 426958 426959 4x50 19,6 35,5 2655 137 215 426960 426961 4x70 22,6 40,0 3600 168 245 426962 426963 4x95 37,9 47,5 4840 199 285 426964 426965 4x120 39,4 52,5 5985 232 315 426966 426967 4x150 43,7 59,0 7470 267 355 426908 426990 5x1,0 4,2 11,0 190 10 45 426909 426991 7x1,0 4,7 12,0 230 18 50 426910 426992 10x1,0 9,9 15,5 350 15 65 426911 426993 12x1,0 9,9 16,0 385 13 65 426912 426994 14x1,0 9,9 16,5 415 13 70 426913 426995 16x1,0 10,0 17,5 450 10 70 426914 426996 19x1,0 10,2 18,5 530 18 75 426915 426997 24x1,0 12,1 21,5 670 15 90 426916 426998 27x1,0 12,5 22,0 720 13 90 426917 426999 37x1,0 14,1 24,5 905 18 100 Table continues on next page

19 LKSM-EMC-SHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 427488 427838 5x1,5 4,7 12,0 230 14 50 427495 427840 7x1,5 5,1 13,0 275 23 55 427497 427842 10x1,5 9,9 16,5 415 20 70 427499 427844 12x1,5 10,0 17,0 455 16 70 427501 427846 14x1,5 10,1 18,0 505 16 75 427503 427848 16x1,5 10,7 19,0 555 14 80 427505 427850 19x1,5 11,4 20,0 650 23 80 427507 427852 24x1,5 13,6 23,0 830 20 95 427509 427854 27x1,5 13,9 24,0 900 16 100 427511 427856 37x1,5 15,7 26,5 1140 23 160 427489 427839 5x2,5 5,3 13,5 295 18 55 427596 427841 7x2,5 5,8 14,5 355 30 60 427498 427843 10x2,5 11,4 18,5 540 26 75 427500 427845 12x2,5 11,5 19,0 605 21 80 427502 427847 14x2,5 11,5 20,0 670 21 85 427504 427849 16x2,5 12,2 21,5 760 18 90 427506 427851 19x2,5 12,9 22,5 880 30 90 427508 427853 24x2,5 15,3 26,0 1115 26 160 427510 427855 27x2,5 15,8 27,0 1220 21 165 427512 427857 37x2,5 17,7 30,0 1540 30 185 0,6/1kV CABLES 1/2013

20 1,8/3kV CABLES LKSM-VFD-SHF2 Armoured power and control cable with improved EMC screening 1,8/3kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - filler tape 4. Screen - copper tape, coverage 100% 5. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour black, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. Design to meet requirements for Variable Frequency Drivers (VFD). Suitable for voltage peaks up to 3kV. Main characteristics Rated voltage 1,8/3kV (3,6kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Transfer impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) Oil resistance IEC 60811-2-1 conditions according to 60092-359 For details see general information section Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: See technical information section. Cable with yellow/green protective earth (PE) conductor on request Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

21 LKSM-VFD-SHF2 1,8/3kV Part number Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 426920 1x16 5,5 14,0 355 94 85 1) 426922 1x25 8,5 16,0 495 123 95 1) 426924 1x35 9,3 17,0 625 153 105 1) 426926 1x50 10,3 19,0 795 196 115 1) 426928 1x70 11,3 20,5 995 240 125 1) 426930 1x95 12,5 23,5 1280 284 140 1) 426932 1x120 13,6 25,5 1525 331 150 1) 426934 1x150 14,7 27,5 1830 381 165 1) 426936 1x185 15,8 29,5 2165 429 180 1) 426938 1x240 17,6 33,0 2800 507 200 1) 426940 1x300 18,9 35,0 3365 582 210 1) 426871 3x16 16,4 26,5 1165 66 160 426873 3x25 16,9 29,5 1525 86 180 426875 3x35 18,7 32,5 1910 107 195 426877 3x50 28,8 37,0 2580 137 225 426879 3x70 35,0 41,0 3395 168 245 426881 3x95 35,4 46,5 4295 199 280 1) 426883 3x120 38,6 50,5 5200 232 305 1) 426885 3x150 42,0 55,0 6255 267 330 1) 426887 3x185 45,5 60,0 7475 300 360 1) 426893 3x95+3x16 35,4 46,5 4655 199 280 2) 426895 3x120+3x25 38,6 50,5 5755 232 305 2) 426897 3x150+3x25 42,0 55,0 6825 267 330 2) Note 1,8/3kV CABLES 1/2013 NOTE! 1) = Protective earth (PE) rules are not fulfilled. (PE rules, for cables over 16 2 the PE-conductor have to be half of main conductor and min. 16 2. This according to IEC 60092-352, Electrical installations in ships Choice and installation of electrical cables) 2 = Three additional protective earth (PE) conductors. Protective earth (PE) rules are fulfilled.

22 0,6/1kV CABLES LKM-FRSHF2 Fire-resistant unarmoured power and control cable 0,6/1kV DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor IEC 60228, class 2 (class 5 on request) - tinned stranded copper conductor on request 1/2013 2. Insulation - Mica tape - XLPE plastic IEC 60092-351 3. Bedding - separator tape 4. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Fire-resistant IEC 60331 series Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

23 LKM-FRSHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 428276 2x1,0 8,5 75 15 50 428132 2x1,5 9,0 90 20 55 428134 2x2,5 10,5 125 26 65 428136 2x4 11,5 165 34 70 428138 2x6 13,0 260 44 75 428140 2x10 15,0 385 61 90 428142 2x16 17,5 550 82 105 428144 2x25 21,5 825 108 130 428278 428279 3x1,0 9,0 95 13 55 428162 428163 3x1,5 9,5 115 16 60 428164 428165 3x2,5 11,0 160 21 65 428166 428167 3x4 12,5 220 28 75 428168 428169 3x6 14,0 330 36 85 428170 428171 3x10 16,0 485 50 95 428172 428173 3x16 18,5 705 67 110 428174 428175 3x25 23,0 1060 89 135 428176 428177 3x35 25,5 1425 110 155 428178 428179 3x50 29,5 1905 137 175 428180 428181 3x70 34,5 2685 169 205 428202 428203 3x95 38,5 3540 205 230 428280 428281 4x1,0 9,5 115 13 60 428182 428183 4x1,5 11,0 150 16 65 428184 428185 4x2,5 12,0 200 21 75 428186 428187 4x4 13,5 280 28 80 428188 428189 4x6 15,0 405 36 90 428190 428191 4x10 18,0 610 50 105 428192 428193 4x16 20,5 900 67 125 428194 428195 4x25 25,5 1365 89 155 428196 428197 4x35 28,5 1820 110 170 428198 428199 4x50 32,5 2450 137 195 428200 428201 4x70 38,0 3430 169 230 428204 428205 4x95 43,5 4570 205 260 428282 428283 5x1,0 11,0 150 10 65 428212 428213 5x1,5 12,0 185 13 70 428214 428215 5x2,5 13,0 240 17 80 428284 428285 7x1,0 12,0 180 9 70 428286 428287 10x1,0 15,0 260 8 90 428288 428289 12x1,0 15,5 295 8 95 428290 428291 14x1,0 16,5 330 7 100 428292 428293 16x1,0 17,5 380 7 105 428294 428295 19x1,0 18,5 435 7 110 428296 428297 24x1,0 21,5 550 6 130 428298 428299 27x1,0 22,0 600 6 130 428300 428301 37x1,0 25,0 805 5 150 428216 428217 7x1,5 13,0 230 12 80 428240 428241 10x1,5 16,5 330 11 100 428220 428221 12x1,5 17,5 380 10 105 428244 428245 14x1,5 18,5 430 10 110 428248 428249 16x1,5 19,5 485 9 115 428224 428225 19x1,5 20,5 565 9 125 428228 428229 24x1,5 24,5 725 8 145 428232 428233 27x1,5 25,0 795 8 150 428234 428235 37x1,5 28,0 1050 7 170 428218 428219 7x2,5 14,5 315 16 90 428242 428243 10x2,5 18,5 450 14 110 428222 428223 12x2,5 19,5 510 13 115 428246 428247 14x2,5 20,5 590 13 125 428250 428251 16x2,5 21,5 670 12 130 428226 428227 19x2,5 23,0 765 11 135 428230 428231 24x2,5 27,5 995 10 165 428236 428237 27x2,5 28,0 1095 10 170 428238 428239 37x2,5 31,5 1450 9 190 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 0,6/1kV CABLES 1/2013

24 0,6/1kV CABLES LKSM-FRSHF2 Fire-resistant armoured power and control cable 0,6/1kV 1/2013 DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor IEC 60228, class 2 (class 5 on request) - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic EC 60092-351 3. Bedding - separator tape 4. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage AC 0,6/1kV (1,2kV) DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Fire-resistant IEC 60331 series Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: see technical information section Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

LKSM-FRSHF2 0,6/1kV Part number Normal G-type Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 428572 1x4 3,1 8,0 115 40 45 428574 1x6 3,1 8,5 140 52 50 428576 1x10 3,5 10,0 195 72 60 428578 1x16 4,0 11,0 265 96 65 428580 1x25 4,9 13,0 380 127 80 428582 1x35 5,5 14,0 485 157 85 428584 1x50 8,7 16,0 655 196 95 428586 1x70 11,4 18,5 905 242 110 428588 1x95 11,5 20,5 1155 293 120 428590 1x120 14,5 22,5 1465 339 135 428592 1x150 14,7 25,0 1770 389 150 428594 1x185 15,2 27,5 2160 444 165 428596 1x240 18,2 30,5 2820 522 185 428598 1x300 18,7 33,5 3450 601 200 428542 2x1,0 3,5 10 120 15 60 428602 2x1,5 3,8 10,5 140 20 65 428604 2x2,5 4,3 11,5 170 26 70 428606 2x4 4,9 13,0 225 34 75 428608 2x6 5,4 14,0 340 44 85 428610 2x10 8,7 16,5 505 61 100 428612 2x16 10,0 19,0 690 82 115 428614 2x25 14,5 23,5 1055 108 140 428616 2x35 14,7 26,0 1325 133 155 428618 2x50 18,1 29,5 1715 167 175 428620 2x70 18,7 34,0 2325 206 205 428543 428544 3x1,0 4,1 10,5 145 13 60 428622 428623 3x1,5 4,1 11,0 170 16 65 428624 428625 3x2,5 4,6 12,0 210 21 75 428626 428627 3x4 5,2 13,5 280 28 80 428628 428629 3x6 5,7 15,0 395 36 90 428630 428631 3x10 9,3 17,5 595 50 105 428632 428633 3x16 10,7 20,0 835 67 120 428634 428635 3x25 14,6 25,0 1260 89 150 428636 428637 3x35 15,0 28,0 1605 110 165 428638 428639 3x50 18,3 31,5 2130 137 190 428640 428641 3x70 22,0 36,5 2920 169 220 428691 428692 3x95 22,8 40,5 3775 205 245 428693 3x120 37,8 45,5 4875 237 275 428545 428546 4x1,0 4,1 11 170 13 65 428642 428643 4x1,5 4,5 12,0 200 16 70 428644 428645 4x2,5 5,0 13,5 255 21 80 428646 428647 4x4 5,7 14,5 335 28 90 428648 428649 4x6 8,8 16,5 505 36 100 428650 428651 4x10 10,3 19,5 725 50 115 428652 428653 4x16 11,9 22,5 1035 67 135 428654 428655 4x25 14,8 27,5 1535 89 165 428656 428657 4x35 18,1 30,5 2000 110 185 428658 428659 4x50 19,5 35,0 2635 137 210 428660 428661 4x70 22,4 40,0 3620 169 240 428703 428704 4x95 37,8 46,0 4895 205 275 428547 428548 5x1,0 4,5 12 195 10 70 428662 428663 5x1,5 5,0 13,5 245 13 80 428664 428665 5x2,5 5,6 14,5 305 17 85 428549 428550 7x1,0 4,9 13 240 9 80 428551 428552 10x1,0 8,7 16,5 355 8 100 428553 428554 12x1,0 9.0 17 395 8 100 428555 428556 14x1,0 11,4 18 455 7 105 428557 428558 16x1,0 11,4 19 505 7 115 428559 428560 19x1,0 11,4 20 555 7 120 428561 428562 24x1,0 12,5 23,5 695 6 140 428563 428564 27x1,0 12,8 24 750 6 145 428565 428566 37x1,0 14,4 26,5 960 5 160 428666 428667 7x1,5 5,4 14,5 295 12 85 428723 428724 10x1,5 9,6 18,0 430 11 110 428670 428671 12x1,5 9,9 19,0 490 10 115 428727 428728 14x1,5 11,7 20,0 555 10 120 428731 428732 16x1,5 11,8 21,0 615 9 125 428674 428675 19x1,5 11,8 22,0 680 9 130 428678 428679 24x1,5 13,9 26,0 875 8 155 428682 428683 27x1,5 14,1 26,5 945 8 160 428684 428685 37x1,5 16,0 29,5 1220 7 180 428668 428669 7x2,5 8,6 16,0 410 16 95 428725 428726 10x2,5 11,7 20,0 570 14 120 428672 428673 12x2,5 11,8 21,0 635 13 125 428729 428730 14x2,5 11,9 22,5 730 13 135 428733 428734 16x2,5 12,5 23,5 815 12 140 428676 428677 19x2,5 13,2 24,5 920 11 145 428680 428681 24x2,5 15,7 29,0 1165 10 175 428686 428687 27x2,5 16,1 29,5 1265 10 175 428688 428689 37x2,5 18,1 33,0 1660 9 200 G-type is with yellow/green earth conductor and marking on sheath is, for example, 3G1,5 25 0,6/1kV CABLES 1/2013

26 250V CABLES LKSM-SHF2 Armoured control and instrumentation cable 250V 1/2013 DESIGN: STANDARDS: IEC 60092-376, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Bedding - separator tape 4. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 5. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Core identification: black numbers on white base Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

27 LKSM-SHF2 250V Part number Number of conductors & cross-section n x 2 Crosssection of armour 2 Nominal outer diameter Approximate weight kg/km Current Rating A at +45 C Min. bending radius fixed installation 427779 2x0,5 3,1 7,0 80 8,7 40 427780 3x0,5 3,1 7,5 85 7,6 45 427781 4x0,5 3,1 8,0 95 6,9 45 427782 5x0,5 3,2 8,5 110 6,4 50 427783 7x0,5 3,5 9,0 125 5,8 55 427784 10x0,5 4,6 11,5 180 5,1 70 427785 12x0,5 4,8 11,5 195 4,8 70 427786 14x0,5 5,1 12,0 215 4,6 70 427787 16x0,5 5,5 12,5 235 4,4 75 427788 19x0,5 5,8 13,5 265 4,1 80 427789 20x0,5 6,1 14,0 285 4,1 85 427790 24x0,5 6,8 15,5 325 3,8 90 427791 27x0,5 6,9 15,5 345 3,7 95 427792 32x0,5 9,9 16,5 420 3,5 100 427793 37x0,5 10,9 18,0 470 3,3 105 426402 2x0,75 3,6 7,5 90 11,3 45 426403 3x0,75 3,6 7,5 100 9,8 45 426404 4x0,75 3,6 8,5 115 8,9 50 426405 5x0,75 4,1 9,5 140 8,3 55 426407 7x0,75 4,1 10,0 165 7,4 60 426410 10x0,75 5,1 12,5 220 6,6 75 426412 12x0,75 5,3 12,5 245 6,2 75 426414 14x0,75 5,6 13,0 270 5,9 80 426416 16x0,75 6,1 14,0 300 5,6 85 426419 19x0,75 6,3 14,5 330 5,3 85 426420 20x0,75 11,0 18,0 455 5,2 110 426424 24x0,75 11,7 17,0 450 4,9 100 426427 27x0,75 11,7 17,5 485 4,7 105 426432 32x0,75 11,8 18,0 545 4,5 110 426437 37x0,75 11,9 19,5 605 4,3 115 250V CABLES 1/2013 Other sizes on request.

28 250V CABLES RFE-SHF2 Armoured instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC 60092-376, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Twisted pair - two insulated cores twisted together to form a pair See next page for Quad 4. Bedding - filler tape 5. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 94% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Electrical data: Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,5 2 0,75 2 1,5 2 Unit 80 52 24,4 ohm/km 55 50 60 nf/km 0,6 0,6 0,7 mh/km 1500 1500 1500 Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

29 RFE-SHF2 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation 420362 1x2x0,5 7,0 85 45 420364 2x2x0,5 Quad 8,0 105 50 420363 2x2x0,5 10,5 130 60 420366 4x2x0,5 11,5 175 70 420368 7x2x0,5 14,0 245 85 420369 8x2x0,5 14,5 270 85 420370 10x2x0,5 17,0 355 100 420371 12x2x0,5 17,5 390 105 420372 14x2x0,5 18,5 440 110 420373 16x2x0,5 19,5 485 120 420374 19x2x0,5 21,0 545 125 420376 24x2x0,5 23,5 670 140 420378 37x2x0,5 28,0 930 170 420382 1x2x0,75 7,5 95 45 420384 2x2x0,75 Quad 9,0 125 55 420383 2x2x0,75 11,0 155 65 420386 4x2x0,75 12,5 215 75 420388 7x2x0,75 15,5 330 90 420389 8x2x0,75 16,0 375 95 420390 10x2x0,75 18,5 440 110 420391 12x2x0,75 19,0 490 115 420392 14x2x0,75 20,5 565 125 420393 16x2x0,75 21,5 620 130 420394 19x2x0,75 23,5 715 140 420396 24x2x0,75 26,0 860 155 420398 32x2x0,75 29,5 1100 175 420490 1x2x1,5 9,5 135 60 420491 2x2x1,5 Quad 11,0 190 65 420492 2x2x1,5 14,0 235 85 420493 4x2x1,5 17,0 375 100 420494 7x2x1,5 20,0 545 120 420495 8x2x1,5 21,5 625 130 420496 10x2x1,5 24,5 760 145 420497 12x2x1,5 25,5 855 155 420498 14x2x1,5 27,0 960 165 420499 19x2x1,5 31,0 1230 185 420500 24x2x1,5 35,0 1530 210 420501 32x2x1,5 39,5 1950 235 250V CABLES 1/2013 Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... (Quad)cable is built up as a star quad with the following identification 1 core white 2 core blue 3 core white 4 core blue

30 250V CABLES RFE-SHF2 (i) Armoured and pair screened instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC 60092-376, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-351 3. Twisted pair & pair screen - two insulated cores twisted together to form a pair - plastic coated aluminium tape and a tinned copper drain wire 4. Bedding - filler tape 5. Armour - drain wire copper (in all sizes) - copper wire braid, coverage > 94% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour grey, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Electrical data: Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km 70 90 nf/km 0,6 0,7 mh/km 1500 1500 Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

31 RFE-SHF2(i) 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation 422006 1x2x0,75 7,5 95 45 422008 1x4x0,75 9,0 140 55 422010 2x2x0,75 11,5 170 70 422012 4x2x0,75 13,0 240 75 422014 7x2x0,75 15,5 375 95 422016 8x2x0,75 16,5 420 100 422018 10x2x0,75 19,0 520 115 422020 12x2x0,75 20,0 585 120 422022 14x2x0,75 21,0 650 125 422024 19x2x0,75 24,0 835 145 422026 24x2x0,75 27,0 1035 160 422050 1x2x1,5 10,0 145 60 422052 1x4x1,5 11,0 200 65 422054 2x2x1,5 14,5 255 85 422056 4x2x1,5 17,0 415 100 422058 7x2x1,5 20,0 610 120 422060 8x2x1,5 22,0 700 130 422062 10x2x1,5 25,0 855 150 422064 12x2x1,5 26,0 965 155 422066 14x2x1,5 28,0 1105 165 422068 19x2x1,5 32,0 1440 190 Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... The pairs are also covered by a numbered tape (1, 2, 3, 4, 5...) 250V CABLES 1/2013

32 250V CABLES RFE-FRSHF2 Fire-resistant armoured instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC 60092-376, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic IEC 60092-351 3. Twisted pair - two insulated cores twisted together to form a pair See next page for Quad 4. Bedding - filler tape 5. Armour - drain wire (in all sizes) - copper wire braid, coverage > 94% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Fire-resistant IEC 60331 Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Electrical data Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km 45 55 nf/km 0,6 0,7 mh/km 1500 1500 Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi

33 RFE-FRSHF2 250V Part number Number of conductors & cross-section n x 2 Nominal outer diameter Approximate weight kg/km Min. bending radius fixed installation 420520 1x2x0,75 9,5 115 55 420522 2x2x0,75 Quad 11,0 170 65 420524 2x2x0,75 14,0 210 85 420526 4x2x0,75 16,5 330 100 420528 7x2x0,75 20,0 470 120 420530 8x2x0,75 21,0 515 125 420532 10x2x0,75 24,5 640 145 420534 12x2x0,75 25,5 710 150 420536 14x2x0,75 27,0 810 165 420538 19x2x0,75 31,0 1025 185 420540 24x2x0,75 34,5 1260 205 420575 1x2x1,5 10,5 155 65 420577 2x2x1,5 Quad 12,0 220 70 420579 2x2x1,5 16,0 315 95 420581 4x2x1,5 18,5 430 110 420583 7x2x1,5 22,5 655 135 420585 8x2x1,5 24,0 725 145 420587 10x2x1,5 27,5 880 165 420589 12x2x1,5 29,0 1010 175 420591 14x2x1,5 30,5 1135 185 420593 16x2x1,5 33,0 1290 195 250V CABLES 1/2013 Core identification Each pair white - blue. Cores numbered 1, 2, 3, 4, 5... (Quad)cable is built up as a star quad with the following identification 1 core white 2 core blue 3 core white 4 core blue

34 250V CABLES RFE-FRSHF2 (i) Fire-resistant armoured and pair screened instrumentation and counication cable 250V 1/2013 DESIGN: STANDARDS: IEC 60092-376, design 1. Conductor - stranded copper conductor IEC 60228, class 2 - tinned stranded copper conductor on request 2. Insulation - Mica tape - XLPE plastic IEC 60092-351 3. Twisted pair & pair screen - two insulated cores twisted together to form a pair - plastic coated aluminium tape and a tinned copper drain wire 4. Bedding - filler tape 5. Armour - drain wire copper - copper wire braid, coverage > 94% IEC 60092-350 - tinned copper wire braid on request 6. Sheath - halogen-free thermosetting polyolefine, SHF2 IEC 60092-359 - standard colour orange, other colours on request Oil resistant Flameretardant Fireresistant Halogenfree Low smoke emission Application: For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recoended. Main characteristics Rated voltage 150/250V (300V) Maximum conductor temperature + 90 C Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Fire-resistant IEC 60331 Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance IEC 60811-2-1 conditions according to 60092-359 Electrical data Loop resistance of pair, max. / +20 C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20 C 0,75 2 1,5 2 Unit 52 24,4 ohm/km 55 75 nf/km 0,6 0,7 mh/km 1500 1500 Mohm*km. Minimum recoended installation temperature -15 C Lowest operation temperature -40 C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer's name and meter marking printed on the sheath Tel. +358 2 410 8700, fax +358 2 410 8750, www.helkamabica.fi