MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)



Σχετικά έγγραφα
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type

Surface Mount Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors

ALUMINUM ELECTROLYTIC CAPACITORS LKG

+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C

Aluminum Electrolytic Capacitors (Large Can Type)

Country of Origin. Japan Malaysia China

Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction

At +105 C no voltage applied after 1,000 hours and then being stabilized at +20 C the capacitors shall meet the following limits Shelf Life

± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:

Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics

Summary of Specifications

I 0.01CV or 3 (μa) whichever is greater measured after 2 I 0.03CV +40 (μa) after 2 minutes application of rated

+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors

LGU. Low Profile. Smaller. LGW High Ripple Current LGN. Performance Characteristics. Measurement frequency : 120Hz Rated voltage (V)

Metal Oxide Varistors (MOV) Data Sheet

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

MCRH Series High Temp. Electrolytic Capacitors

High Lipple Current. Low Profile. Smaller. Performance Characteristics to 100

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

+105 C General Purpose Radial Lead Aluminum Electrolytic Capacitors. filtering

GU series. GU Low Profile ALUMINUM ELECTROLYTIC CAPACITORS. Specifications. Type numbering system (Example : 200V 680µF) Drawing

+85 C General Purpose Miniature Aluminum Capacitors

LS series Withstanding 3000 hours application of rated ripple current at 85 C.

Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors

601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR

Aluminum Capacitors C, Tubular, Radial Lead

THICK FILM LEAD FREE CHIP RESISTORS

ELECTROLYTIC, Snap-in, 2 pin

B37631 K K 0 60

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

SMD Power Inductor-VLH

FP series Anti-Bend (Soft termination) capacitor series

Multilayer Chip Capacitors C0G/NP0/CH

YJM-L Series Chip Varistor

Multilayer Chip Inductor

SMD Power Inductor-VLH

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

RF series Ultra High Q & Low ESR capacitor series

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)

Interference Suppression Capacitor

Thin Film Chip Resistors

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage

Series AM2DZ 2 Watt DC-DC Converter

NTC Thermistor:SCK Series

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

Melf Carbon Film Resistor MMC Series

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of

NTC Thermistor:SCK Series

Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type

1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)

RSDW08 & RDDW08 series

Current Sense Metal Strip Resistors (CSMS Series)

Metal thin film chip resistor networks

Metal Film Leaded Precision Resistor

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of

Thin Film Precision Chip Resistor (AR Series)

Metal Oxide Leaded Film Resistor

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

Thin Film Precision Chip Resistor (AR Series)

RC series Thick Film Chip Resistor

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

Type C Aluminum Electrolytic, Screw Terminal Best Value 85 C High Capacitance Screw Terminal Type

Multilayer Ceramic Chip Capacitor

Unit: mm Packaging (7 Reel) L W T / Symbol M B Paper tape Plastic tape 1.25±0.10 D - 1K 3.20± ±0.20 G - 1K 4.50±0.40

Multilayer Ceramic Chip Capacitor

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC

MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet

Carbon Film Leaded Resistor

Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)

SMD Transient Voltage Suppressors

Ceramic PTC Thermistor Overload Protection

High Frequency Chip Inductor / CF TYPE

DATA SHEET Surface mount NTC thermistors. BCcomponents

SPBW06 & DPBW06 series

Current Sensing Chip Resistor

Metal Film Flame-Proof Resistors

Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of

Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

Metal Oxide Leaded Film Resistor

PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current

NPIS Shielded Power Inductors

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

Data sheet Thin Film Chip Inductor AL Series

CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.

MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Multilayer Chip Inductor / CL TYPE

SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of

Transcript:

SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage Range Characteristics -4~+5 C 6.3~V.DC Capacitance Tolerance ±2%(2 C, 12Hz) Leakage Current(MAX) I=.1CV or 3µA whichever is greater. (After 2 minutes) I=Leakage Current(µA) C=Nominal Capacitance V=Rated Voltage(V) Dissipation Factor(MAX) Load Life Rated Voltage 6.3 16 25 35 5 63 (2 C, 12Hz) (V) tanδ.22.19.16.14.12..9.8 When nominal capacitance is over µf, tanδ shall be added.2 to the listed value with increase of every µf. After life test with max. at conditions stated in the table below, the capacitors shall meet the following requirements. Capacitance Change Leakage Current Within ±25% of the initial value. Not more than 2% of the specified value. Not more than the specified value. Case Dia Life Time(hrs) φd< = 6.3 6.3~WV 16~WV 4 5 φd=8, 6 7 φd> = 12.5 8 Low Temperature Stability Impedance Ratio(MAX) Rated Voltage (V) Z(-25 C)/Z(2 C) Z(-4 C)/Z(2 C) 6.3 16 25 35 5 63 4 3 2 2 2 2 2 8 6 4 3 3 3 3 2 3 (12Hz) MULTIPLIER FOR RIPPLE CURRENT (1) Frequency coefficient Frequency(Hz).~4.7µF ~µf ~µf ~µf ~15µF 6(5) 12 1k k k< =.35.42.6.8.45.55.75.9.6.7.85.95.75.9.98.75.8.95 (2) Temperature coefficient Ambient Temperature ( C) 5 85 65> = 1.7 2.1

DIMENSIONS (mm) SLEEVE F ±.5 φd 5.5 6.3 8.6 12.5 16 18.8 F 2. 2.5 3.5 7.5 L+αMAX 15MIN 4MIN φd+.5max α L< = 16 : α=1.5 L> = 2 : α=2. STANDARD SIZE Rated voltage 6.3V(J) (ma r.m.s./5 C, khz) 2 C, khz - C, khz 25.4 x12.5 58.16 185.34.96 68 185.34.96 15.25.58 Rated voltage V(1A) 68 (ma r.m.s./5 C, khz) 2 C, khz - C, khz 25.4 x16 77.12 165.48.16 185.34.96.25.58

68 x12.5 x2 Rated voltage 16V(1C) (ma r.m.s./5 C, khz) 4 2 C, khz.25 58.16 5.78 165.48 185.34 - C, khz.3.16.96.25.58 Rated voltage 25V(1E) (ma r.m.s./5 C, khz) 2 C, khz 25.4 x12.5 58.16 x16 77.12 - C, khz 185.34.96.25.58 Rated voltage 35V(1V) (ma r.m.s./5 C, khz) 2 C, khz - C, khz 25.4 x12.5 58.16 x16 77.12 x2 5.78.3 165.48.16.25.58

. 17 5.5 12. 1 3 4. 8. 2.2 43 2.5 6. 3.3 53 2.2 5.6 4.7 88 1.9 1.5 4. 22 x2 Rated voltage 5V(1H) (ma r.m.s./5 C, khz) 2 C, khz x16 77.12 5.78 - C, khz 185.34.96.25.58.3 Rated voltage 63V(1J) 22 87 2.3 9.3 14 1.3 5.2 14 1.2 2.63 2.8 x12.5 3.43 x2 52 (ma r.m.s./5 C, khz) 2 C, khz - C, khz 1.8.84 66.16.64 75.12.45 139.54.2 1 2.2 3.3 4.7 22. x12.5 x16 Rated voltage V(2A) (ma r.m.s./5 C, khz) 2 C, khz 15 6. 17. 2 4.5 1 3 3. 13. 4 2.7 65 2.5 14 1.2 16.63 - C, khz 1. 2.8 23.43 1.8 29.31 1.5 43.16.64 9.73.27 9.73.27

CHARACTERISTIC DATA TEMPERATURE CHARACTERISTICS Capacitance Change (%) 2 - -2-3 -4 Cap. Z -5-6 -4-2 2 4 6 8 12. Temperature ( C) (at 12Hz) 7 6 5 4 3 2 Impedance Ratio (Zt/Z(2)) (%) 35 φx2l 5 φl..1-6 -4-2 2 4 6 8 12 Temperature ( C) FREQUENCY CHARACTERISTICS (at 2 C) Impedance (Ω) 1.1 LOAD LIFE Capacitance Change (%).1.1 1 Frequency (KHz) 2 - -2-3.5.4.3.2.1 25 Leakage Current (µa/wv 1min) 2 15 5 2 4 6 8 Time (Hours)

SERIES NEW 5 C Low impedance. (Rated Voltage 16~25V.DC) SPECIFICATIONS Items Operating Temperature Range Rated Voltage Range Characteristics -4~+5 C 16~25V.DC Capacitance Tolerance ±2% (2 C, 12Hz) Leakage Current(MAX) I=.4CV + µa I=.2CV + 25µA (After 1 minute application of rated voltage) (After 5 minutes application of rated voltage) I=Leakage Current(µA) C=Nominal Capacitance V=Rated Voltage(V) Dissipation Factor(MAX) Rated Voltage(V) 16 2 25 tanδ.12.12.12 (2 C,12Hz) Load Life After applying rated voltage with max for 2hrs at 5 C, the capacitors shall meet the following requirements. Capacitance Within ±2% of the initial value. Change Not more than 2% of the specified value. Leakage Current Not more than the specified value. Low Temperature Stability Impedance Ratio(MAX) Rated Voltage Z(-25 C)/Z(2 C) Z(-4 C)/Z(2 C) 16 2 25 3 3 3 4 4 4 (12Hz) MULTIPLIER FOR RIPPLE CURRENT (1)Frequency coefficient (2)Temperature coefficient Frequency(Hz) 6(5) 12 1k k k Ambient Temperature( C) 5 85 65.4.5.75.9 1.7 2.1

DIMENSIONS (mm) SLEEVE F ±.5 φd 12.5.6 16 18.8 F 7.5 L+2 MAX 15MIN 4MIN φd+.5max STANDARD SIZE Rated voltage 16V(2C) φdxl (mm) (ma r.m.s./5 C, khz) Impedance(ΩMAX) 2 C, khz 22 x2 35 45.7 6.45 95.24 14.14 φdxl (mm) Rated voltage 2V(2D) (ma r.m.s./5 C, khz) Impedance(ΩMAX) 2 C, khz 22 x2 35 55.55 6.44 12.17 14.14 φdxl (mm) Rated voltage 25V(2E) (ma r.m.s./5 C, khz) Impedance(ΩMAX) 22 x2 3 1.4 45.7 85.31 12 2 C, khz.18