MCRH Series High Temp. Electrolytic Capacitors

Σχετικά έγγραφα
Precision Metal Film Fixed Resistor Axial Leaded

Aluminum Electrolytic Capacitors (Large Can Type)

Aluminum Electrolytic Capacitors

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current

Country of Origin. Japan Malaysia China

Surface Mount Aluminum Electrolytic Capacitors

+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction

At +105 C no voltage applied after 1,000 hours and then being stabilized at +20 C the capacitors shall meet the following limits Shelf Life

± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:

I 0.01CV or 3 (μa) whichever is greater measured after 2 I 0.03CV +40 (μa) after 2 minutes application of rated

RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type

+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors

Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics

Summary of Specifications

ALUMINUM ELECTROLYTIC CAPACITORS LKG

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors

+85 C General Purpose Miniature Aluminum Capacitors

Metal Oxide Varistors (MOV) Data Sheet

Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

+105 C General Purpose Radial Lead Aluminum Electrolytic Capacitors. filtering

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

LGU. Low Profile. Smaller. LGW High Ripple Current LGN. Performance Characteristics. Measurement frequency : 120Hz Rated voltage (V)

Aluminum Capacitors C, Tubular, Radial Lead

Type SLPX 85 C Snap-In Aluminum Electrolytic Best Value 85 C Snap-In Type

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR

Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)

ELECTROLYTIC, Snap-in, 2 pin

RF series Ultra High Q & Low ESR capacitor series

Multilayer Chip Inductor

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

Monolithic Crystal Filters (M.C.F.)

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

LS series Withstanding 3000 hours application of rated ripple current at 85 C.

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

High Lipple Current. Low Profile. Smaller. Performance Characteristics to 100

Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH

GU series. GU Low Profile ALUMINUM ELECTROLYTIC CAPACITORS. Specifications. Type numbering system (Example : 200V 680µF) Drawing

SMD Power Inductor-VLH

Interference Suppression Capacitor

B37631 K K 0 60

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

SMD Power Inductor-VLH

FP series Anti-Bend (Soft termination) capacitor series

Chilisin Electronics Singapore Pte Ltd

Cite as: Pol Antras, course materials for International Economics I, Spring MIT OpenCourseWare ( Massachusetts

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

High Frequency Chip Inductor / CF TYPE

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T

Metal thin film chip resistor networks

PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current

Unshielded Power Inductor / PI Series

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.

MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Type C Aluminum Electrolytic, Screw Terminal Best Value 85 C High Capacitance Screw Terminal Type

Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION

NTC Thermistor:SCK Series

High Voltage Ceramic Capacitor (Radial Disc Type)

LR Series Metal Alloy Low-Resistance Resistor

Thin Film Chip Resistors

XKT. Metal Oxide Varistor FEATURES

Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

LR(-A) Series Metal Alloy Low-Resistance Resistor

Single-channel Safety Barriers Series 9001

Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead

DATA SHEET Surface mount NTC thermistors. BCcomponents

Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W

LR Series Metal Alloy Low-Resistance Resistor

Multilayer Chip Inductor / CL TYPE

Polymer PTC Resettable Fuse: KRG Series

SMD Transient Voltage Suppressors

THICK FILM LEAD FREE CHIP RESISTORS

Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V

Series AM2DZ 2 Watt DC-DC Converter

Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.

Melf Carbon Film Resistor MMC Series

PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life

E62-TAB AC Series Features

Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG

NTC Thermistor:TTC3 Series

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

Large Can. Aluminum Electrolytic Capacitors. Year 2000 issue

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)

Bulletin 1489 UL489 Circuit Breakers

High Speed, Low Loss Multi-layer Materials

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

NTC Thermistor:SCK Series

Transcript:

Features: General purpose. Wide CV value range. Safety vent construction products, ECRH series are guaranteed for 000 hours at C. High temperature radial leaded electrolytic. Supplied loose with straight leads. Electrical Specifications Item Performance Operating Temperature Range -40 to + C Rated Working Voltage Range - 0V dc Nominal Capacitance Range 0.47-4700µF Capacitance Tolerance Leakage Current ±0% (at +0 C, 10Hz) l 0.01CV or 3(µA) maximum Whichever is greater after 3 minutes I : Leakage Current (µa) C : Rated Capacitance (µf) V : Working Voltage (V) Dissipation Factor (tanδ) (10Hz\+0ºC) Working Voltage (V) 16 3 63 0 tanδ maximum 0.19 0.16 0.14 0.1 0. 0.07 Add 0.0 per 00µF for more than 00µF. WV (V dc) Frequency (Hz) 60 10 1K K 0K 0.47-330 0.8 1.30 1.40 1. Maximum Permissible Ripple Current -3 63-0 470-3300 1.1 1. 0.9 1.0 C 4700 1. 1.0 1 0.47-33 1. 1.6 1.80 0.7 47-0 1.40 1.60 1.6 C 330 0.80 1.30 1.3 1.40 Page 1 /0/0 V1.0

Electrical Specifications Item Performance Characteristics at Low Temperature (stability at 10Hz) Working Voltage (V) 16 3 63 0 -ºC/ +0ºC 3-40 C/+0 C 6 4 3 For capacitance value >00µF, Add 0. per another 00µF for - C/ + C, Add 1.0 per another 00µF for -40 C/+0 C. After 000 hours application of DC rated working voltage at + C, The capacitor shall meet the following limits: Post test requirements at +0 C. High Temperature Loading Leakage Current Capacitance Change Dissipation Factor (tanδ) the initial specified value ±0% of initial measured value 00% of initial specified value Shelf Life After storage for 00 hours at + C with no voltage applied. Post test requirements at +0 C. Same limits for high temperature loading. Page /0/0 V1.0

Permissible Ripple Current Maximum Ripple Current: ma (rms) (at C, 10Hz) WV (SV) 16 3 63 0 µf (13) (0) (3) (44) (79) (1) 0.47 1.0 1. 3 3.3 9 4.7 6 8 3 34 3 38 41 0 6 49 4 7 61 8 96 33 60 64 69 7 0 140 47 70 99 8 0 13 180 0 1 13 170 3 30 0 17 1 30 300 400 70 330 4 60 33 400 40 700 470 90 370 440 0 700 880 00 0 640 770 90 1 00 860 00 1170 1340 3300 10 1300 1460 160 4700 1400 1600 1780 1900 Page 3 /0/0 V1.0

Diagram of Dimensions PVC sleeve φd Rubber Safety vent φ8up F L + αmax 1min min L 16 - α = 1 L > 16 - α = Dφ (+ 0. Maximum) 6.3 8 13 16 18 F (± 0.). 3. 7. dφ (±0.0) 0. 0.8 φd Case Size Table φ x Length WV (SV) 16 3 63 0 µf (13) (0) (3) (44) (79) (1) 0.47 1.0. x 11 3.3 4.7 x 11 6.3 x 11 x 11 8 x 11 x 11 6.3 x 11 33 x 13 x 11 47 6.3 x 11 8 x 11 x 16 x 11 0 6.3 x 11 6.3 x 11 8 x 11 x 13 13 x 1 0 6.3 x 11 8 x 11 x 13 x 1 8 x 11 16 x 6 330 x 13 x 16 13 x 1 8 x 11 470 x 13 x 16 x 1 13 x 6 16 x 3 00 x 16 x 1 13 x 1 13 x 1 16 x 3 00 13 x 1 13 x 6 16 x 3 13 x 1 3300 13 x 6 16 x 3 18 x 36 4700 16 x 6 16 x 3 18 x 36 18 x 4 Page 4 /0/0 V1.0

Part Numbers Capacitance (µf) Voltage (V dc) Ripple (ma) 49 Length (D) Dimensions (d) Pitch Part Number 90-988 33 6 90-990 47 80 11 0. 91-00 0 94-16 0 171 6.3. 94-1633 330 46 91-038 1 8 3. 470 38 94-1641 00 70 16 94-160 00 960 94-1668 1 13 3300 1194 94-1676 4700 143 6 16 0.8 7. 94-1684 39 94-169 49 94-1706 11 33 6 0. 91-117 47 76 94-1714 0 19 6.3. 94-17 1 0 94-1730 16 8 3. 330 9 11 94-1749 470 370 13 94-176 00 77 94-1773 1 00 3 94-1781 13 3300 186 6 94-1790 4700 1889 3 16 0.8 7. 94-1803 33 88 94-1811 47 81 0. 94-180 11 0 137 6.3. 94-1838 0 00 8 3. 94-1846 330 347 13 94-184 470 48 16 94-186 00 0 1 94-1870 13 00 134 6 94-1889 3300 1630 3 16 0.8 7. 94-1897 Page /0/0 V1.0

Part Numbers Capacitance (mf) 4.7 Voltage (V dc) Ripple (ma) Length (D) 0 3 17 8 Dimensions (d) Pitch Part Number 94-74 39 94-1900 60 0. 94-1919 11 33 7 94-197 47 1 6.3. 94-193 0 300 13 3. 94-1943 94-191 330 417 14 94-1960 470 3 94-1978 1 00 869 13 94-1986 00 136 3 16 0.8 7. 94-1994 1 1 94-001. 0 94-0 3.3 7 91-439 4.7 30 11 0. 94-08 0 94-036 8 6.3 94-044. 33 63 94-0 47 146 1 8 3. 94-060 0 8 13 94-079 0 460 94-087 1 330 1 94-09 13 470 768 6 94-9 00 143 3 16 0.8 7. 94-117 0.47 91-43 1 1 91-. 91-67 0. 3.3 7 11 91-79 4.7 36 91-80 61 6.3. 91-9 0 6 8 3. 94-1 33 14 13 91-6 47 190 16 94-133 0 30 1 13 94-141 0 66 94-6 16 0.8 7. 330 70 94-168 Page 6 /0/0 V1.0

Notes: International Sales Offices: AUSTRALIA Farnell InOne Tel No: ++ 61 964 8888 Fax No: ++ 61 9644 7898 FINLAND Farnell InOne Tel No: ++ 38 9 60 7780 Fax No: ++ 38 9 34 411 NETHERLANDS Farnell InOne Tel No: ++ 31 30 41 7373 Fax No: ++ 31 30 41 7333 SWITZERLAND Farnell InOne Tel No: ++ 41 1 04 64 64 Fax No: ++ 41 1 04 64 4 AUSTRIA Farnell InOne FRANCE Farnell InOne NEW ZEALAND Farnell InOne UK Farnell InOne Tel No: ++ 43 66 180 680 Tel No: ++ 33 474 68 99 99 Tel No: ++ 64 9 37 0646 Tel No: ++ 44 8701 00 00 Fax No: ++ 43 66 180 670 Fax No: ++ 33 474 68 99 90 Fax No: ++ 64 9 37 066 Fax No: ++ 44 8701 00 01 BELGIUM Farnell InOne GERMANY Farnell InOne NORWAY Farnell InOne UK BuckHickman InOne Tel No: ++ 3 3 47 8 Tel No: ++ 49 89 61 39 39 39 Tel No: ++ 4 44 3 66 66 ++ 44 840 Fax No: ++ 3 3 7 3648 Fax No: ++ 49 89 613 9 01 Fax No: ++ 4 44 3 66 0 ++ 44 840 130 BRAZIL Farnell-Newark InOne Tel No: ++ 11 4066 9400 Fax No: ++ 11 4066 94 HONG KONG Farnell-Newark InOne Tel No: ++ 8 68 9888 Fax No: ++ 8 68 9899 PORTUGAL Farnell InOne Tel No: ++ 34 93 47 8804 Fax No: ++ 34 93 474 88 UK CPC ++ 44 8701 0 30 ++ 44 8701 0 31 CHINA Farnell-Newark InOne Tel No: ++86 638 1 Fax No: ++86 638 0 IRELAND Farnell InOne Tel No: ++ 33 1 830 977 Fax No: ++ 33 1 830 9016 SINGAPORE Farnell-Newark InOne Tel No: ++ 6 6788 000 Fax No: ++ 6 6788 0300 export EXPORT Farnell InOne Tel No: ++ 44 8701 00 08 Fax No: ++ 44 8701 00 09 For enquiries from all other markets DENMARK Farnell InOne ITALY Farnell InOne SPAIN Farnell InOne Tel No: ++ 4 44 3 66 44 Tel No: ++ 39 0 93 99 00 Tel No: ++ 34 93 47 880 Fax No: ++ 4 44 3 66 06 Fax No: ++ 39 0 93 99 300 Fax No: ++ 34 93 474 7 http://www.farnellinone.com ESTONIA Farnell InOne Tel No: ++ 38 9 60 7780 Fax No: ++ 38 9 34 411 MALAYSIA Farnell-Newark InOne Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 SWEDEN Farnell InOne Tel No: ++ 46 8 730 0 00 Fax No: ++ 46 8 83 6 http://www.buckhickmaninone.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc 004. Page 7 /0/0 V1.0