ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012

Σχετικά έγγραφα
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013

1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A

WiFi 2.4 GHz Typical performance (Test board size 80 x 37 mm, PWB top surface ground removal area x 6.25 mm, position 1 on PWB)

Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C

Polymer PTC Resettable Fuse:KMC Series

High Frequency Ceramic Inductors TLNMH0603P Series

YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)

Multilayer Ceramic Chip Capacitors

B37631 K K 0 60

Multilayer Ceramic Chip Capacitors

SMD Transient Voltage Suppressors

SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)

SAW FILTER - RF RF SAW FILTER

High Current Chip Ferrite Bead MHC Series

Multilayer Chip Inductor

Ceramic PTC Thermistor Overload Protection

Polymer PTC Resettable Fuse: KRG Series

Low Value Multilayer Inductors (LMCI Series)

POWER OVER ETHERNET (PoE) MAGNETICS

Polymer PTC Resettable Fuse: KMC Series

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

RC series Thick Film Chip Resistor

FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS

SMD Power chokes- SPD Series SPD series chokes For High Current Use

3 V, 900 MHz Si MMIC AMPLIFIER

YJM-L Series Chip Varistor

3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER

Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)

Metal Oxide Varistors (MOV) Data Sheet

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008

3 V, 900 MHz LOW NOISE SI MMIC AMPLIFIER

Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.

Thin Film Chip Resistors

AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM

SMD Power Inductor-VLH

Surface Mount Aluminum Electrolytic Capacitors

WLCW1005 SMD Wire Wound Ceramic Chip Inductors

± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.

2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER

RF series Ultra High Q & Low ESR capacitor series

Thin Film Chip Inductor

SMD Power Inductor-VLH

Ferrite Chip Beads For Automotive Use

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

Ceramic PTC Thermistor Overload Protection

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

Unshielded Power Inductors

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

Metal Film Leaded Precision Resistor

WIRE WOUND CHIP INDUCTORS

Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency

INPAQ Global RF/Component Solutions

NPN Silicon RF Transistor BFQ 74

Transient Voltage Suppressor

FP series Anti-Bend (Soft termination) capacitor series

NTC Thermistor:TSM type

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

High Frequency Chip Inductor / CF TYPE

Monolithic Crystal Filters (M.C.F.)

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of

NPIS Shielded Power Inductors

Data sheet Thin Film Chip Inductor AL Series

VGS=-8V. RG=15ohm. Item Symbol Condition Limit Unit. VDS=50V, IDS1=0.9mA VDS=50V, IDS2=7.2mA

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

GENERAL PURPOSE TRANSFORMERS 2 Watt Pulse, Electrostatically Shielded, 500 mw Pulse, RF Pulse, and Control Transformers

Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

NTC thermistors for temperature measurement

NTC Thermistor:TTC3 Series

SMD AVR AVR-M AVRL. Variable resistor. 2 Zener diode (1/10) RoHS / / j9c11_avr.fm. RoHS EU Directive 2002/95/EC PBB PBDE

Series AM2DZ 2 Watt DC-DC Converter

Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W

MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200

Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH

SCL Series. Multilayer Chip Ferrite Inductor

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

Metal Oxide Leaded Film Resistor

Surface Mount Multilayer Inductor

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)

Unshielded Power Inductor / PI Series

THICK FILM LEAD FREE CHIP RESISTORS

Aluminum Electrolytic Capacitors (Large Can Type)

Power Inductor LVS Series

Metal Film Leaded Precision Resistor

XKT. Metal Oxide Varistor FEATURES

Multilayer Chip Inductor / CL TYPE

SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion

SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of

0.5W SMD Zener Diodes TLZJ2.0A TLZJ W SMD Zener Diodes. Features. MiniMelf. Mechanical Data

TODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team

Thin Film Chip Inductor

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

Chilisin Electronics Singapore Pte Ltd

NPI Unshielded Power Inductors

Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics

Chip Ferrite Bead MCB-S/B Series

Transcript:

W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile - Compact size W x L x H (0 x. x 4 mm) - Low weight (600 mg) - Lead free materials - Fully SMD compatible - Lead free soldering compatible - Tape and reel packing - RoHS Compliant Product Applications - ISM 900 Band Electrical specifications @ +5 C Note: Electrical characteristics depend on test board (GP) size and antenna positioning on GP and Ground Clearance area size. ISM 90 98 MHz Typical performance (test board size 00 x 7 mm, PWB ground clearance area 0.80 mm x 8.5) Frequency Range [MHz] RHCP Gain [dbic] Max Gain [dbi] Efficiency [%] / [db] Return loss min. [db] Impedance [Ω] Operating Temperature [ C] 90 98 0.85 (Peak) 0.5 (Band edges) (peak) 0.5 (band edges) 70 / -,55 (peak) 50 / - (band edges) -6 50-40 to +85 40 Kempele, Finland Tel: +58 07 95 500 Fax: +58 07 95 50 008. All Rights Reserved.

W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Terminal Configuration Matching Component (optional sh nt) ro nd clearance area (0.80 x 8.5 mm) all metallization sho ld e removed rom all W la ers Feed contact ro nd contact ro nd area ro nd via hole ro nd area sho ld e s rro nded ith ro nd via holes Feed line 50 hm An t pe o 50 hm eed line can e sed. Inner la ers on eedline area need to designed to give 50 hm characteristics to eed line. Ag metallization contact pad area (x).75 0.0 Antenna features PWB features No. Terminal name Terminal Dimensions No. Terminal name Terminal Dimensions Feed / GND.5 x.75 mm Feed,7 x,45 mm Feed / GND.5 x.75 mm GND,7 x,45 mm Antenna is symmetrical. Either of terminals or can be feed / GND GND,7 x,0 mm 40 Kempele, Finland Tel: +58 07 95 500 Fax: +58 07 95 50 008. All Rights Reserved.

W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Typical Electrical Characteristics (T=5 C) Measured on the 00 x 7mm test board Typical Return Loss S/ impedance 6.468 d 90.000 MHz 6.468 5.57 d 90.000 d.000 MHz MHz 6.468 d 90.000 MHz CH S 5 d /R F 0 d 5.57 6.806 d.000 d 98.000 MHz MHz 5.57 d.000 MHz CH S 5 d /R F 0 d 6.806 d 98.000 MHz CH S 5 d /R F 0 d 6.806 d 98.000 MHz Del Del Del Del 47.7 5. 90.000 MHz ISM 900 MHz 47.7 65. 5.0. 90.000 7.05 MHz pf 47.7 5. 90.000 MHz 65..000 0. 000 MHz 7.05 pf 65. 0. 7.05 pf CH S M FS.000. 000 MHz 4.895 98.000 MHz.000 000 MHz CH S M FS. 4.895 98.000 MHz CH S M FS. 4.895 98.000 MHz Del Del C T R C T R.000.000 MHz000 MHz C T R.000 000 MHz S A 00 S A 00000 MHz 000 MHz S A 00 000 MHz C T R.000 C T R 000 MHz.000 000 MHz C T R.000 000 MHz S A 00 000 S A MHz00 000 MHz S A 00 000 MHz ISM 900 ISM MHz 900 MHz 60 60 50 60 50 40 50 40 0 40 0 0 0 0 0 90.00 90 90 90 9 90 90 9 9 90 9 90 98 90 9 9 98 98.00.00.50.50.00.00.00.00 0.50 0.50.50.50.00.00.00.00 90 90 90 90 90 90 9 9 90 90 90 90 9 9 9 9 98 98 90 90 9 9 98 0.50 0.50 Fre MHz Max Max ain ain Avg. Avg. ain ain Max ain Avg. ain Max ain Avg. ain.50.50.50.50 4.50 4.50.50.50.50.50 4.50 4.50 98 40 Kempele, Finland Tel: +58 07 95 500 Fax: +58 07 95 50 008. All Rights Reserved.

W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0,4 GHz Typical Free space Radiation Patterns XZ-PLANE ZY-PLANE XY-PLANE 40 Kempele, Finland Tel: +58 07 95 500 Fax: +58 07 95 50 008. All Rights Reserved.

W0 Datasheet version.. Ceramic Antenna. (0/08)..50.00 Ceramic Antenna.50.00 CH S 5 d /R F 0 d Ground cleared under antenna, clearance area 0.4.50 mm x 8.5 mm. Pulse Part Number: W0.50 6.468 d 90.000 MHz 5.57 d.000 MHz 6.806 d 98.000 MHz ISM 900 M CH S M C T R.000 000 MHz 0.50 Packing form Max ain 90 90 9 Avg. ain 90 9 98 S A 00 0 MHz C T R.000 000 MHz Del S A 00 000 MHz Del.50 60 50 40 0 0 90 90 9 90 9 98.00.00.00 C T R.000 000 MHz 0.50 Max ain 90 90 9 Avg. ain.50.50 4.50 S A 00 000 MHz 90 9 98 C T R.000 I 60 50.00 40 0 0 90 90 9 90 9 98 40 Kempele, Finland Tel: +58 07 95 500 Fax: +58 07 95 50 008. All Rights Reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pulse: W0