DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue

Σχετικά έγγραφα
FDL - FXDL FBDL SERIES

Applications Water distribution

Lowara SPECIFICATIONS

Lowara APPLICATIONS MATERIALS. General Catalogue

LOWARA e-nsce, e-nscs, e-nscf

High pressure centrifugal pumps

VERTICAL MULTI-CELL CENTRIFUGAL PUMPS IN AISI 316 STAINLESS STEEL

High hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)

Vertical multistage centrifugal pumps in AISI 316 stainless steel

50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE

HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304

- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304

HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304

MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS

Page - DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSIONS PUMP TABLE 401 PACKING 402

- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403

MATRIX HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. Your Life, our Quality. Worldwide.

- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403

Submittal Data Sheet Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator

TECHNICAL DATA Date 12/22/15 Series 50GF22.2

4 Way Reversing Valve

7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100

4 Way Reversing Valve

SVH with HYDROVAR (HVL range)

ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD

Submersible MOTORS PRODUCT CATALOGUE

Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You

ECOL Motors In Aluminum Housing

Borehole Pumps. SCUBA SERIES Close-coupled submersible pumps for 5 wells. GS 4 SERIES Submersible pumps for 4 wells

Περιγραφή κατασκευαστικής σειράς: Wilo-Drain MTS

Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz

Technical Report. General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor

A31. Aluminium heat exchanger A31

Return Line Filters Type RTF10/25

Comeo Type Series Booklet

Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1

ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA

± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:

SIEMENS Squirrel Cage Induction Standard Three-phase Motors

Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top

PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

Safety Barriers. 6 Safety Barriers KP00 III en Preferred products in stock or available at short notice

Contactors & Thermal Overload Relays

B37631 K K 0 60

[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.

ΕΒΑΘ ΑΝΤΛΙΕΣ EVATH PUMPS.

[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.

RANGE OF APPLICATION HYDRO TOTAL MRL. ver sion 3.1 / web: info@doppler.gr

Multilayer Ceramic Chip Capacitors

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

MRL HYDRAULIC LIFTS TYPE:

ACTORS IEC CONT Ex9C

MRL HYDRAULIC LIFTS TYPE:

Contents MRL HYDRAULIC LIFTS TYPE: HYDRO TOTAL MRL. Version: 3.0 Page: 2/18 Date:

DC040B Series Salient Characteristics

Metal Oxide Leaded Film Resistor

Aluminum Electrolytic Capacitors (Large Can Type)

Karta Katalogowa CATALOGUE CARD

Multilayer Ceramic Chip Capacitors

ΜΜ917-Σχεδιασμός Ενεργειακών Συστημάτων

Return Line Filters. Return Line Filters Type RTF10/25. C Technology. Filtration. Product Description. Technical Data. Options and Accessories

QUICKTRONIC PROFESSIONAL QTP5

P-PAB-PSA Series Peripheral Pumps. SP Series Self-priming Pumps with Side Channel. BG Series Self-priming Centrifugal Pumps with Ejector

Μηχανές Ηλεκτροσύντηξης & Μετ. Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης PΕ100 Υδρόμετρα Αντλίες

Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.

Metal Oxide Leaded Film Resistor

, / 230 4,6 / 2, , / 230 5,4 / 2,7

Siemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)

MZ0.5GN SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)

Creative TEchnology Provider

MVSI. Technical features. Motor shaft In treated steel alloy (Isothermic hardening) resistant to stress.

Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction

Aluminum Electrolytic Capacitors

e-sh Series ErP 2009/125/EC 50 Hz

DC SERVO MOTORS Previous N23XX Series. EC057C Series Salient Characteristics

DC054B Series Salient Characteristics

BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.

Single-channel Safety Barriers Series 9001

Technical Data Catalog

IE3 IE2. 100% From Europe. Squirrel-Cage Low Voltage Motor. Premium Efficiency. High Efficiency. Made in Europe. Converter fed Motor.

FEATURES HOW TO ORDER SWH - G03 - C2 - A LS SOLENOID OPERATED DIRECTIONAL VALVE SWH-G03 SERIES 1/10

DOUBLE STAGE SCISSORS CAR LIFT TYPE:

Recommended purity level >4 m(c) / >6 m(c) / >14 m(c) 15/13/10. Type of system/area of application/ Components

Engineering Data High-wall Type (3 series) Indoor Unit. Contents MMK-AP0073H MMK-AP0093H MMK-AP0123H MMK-AP0153H MMK-AP0183H MMK-AP0243H.

Thermistor (NTC /PTC)

TYJX Series Rare Earth Permanent Magnet Excited Three Phase Synchronous Motor

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

BMA SERIES Subminiature Blind Mate Connectors

Series of Wafer Check Valves Design:API 594, API 6D

DATA SHEET Surface mount NTC thermistors. BCcomponents

SERVICE. Service Information Frontloader Washing machine AWO/D Last Modification: 02/01/09 AWO/D 45135

FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN

Industrial Pressure Transmitter

MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

REFERENCE. Surge Absorber Unit. Contactor AS R 50Hz AC220V. Separate Mounting Unit. Mechanical Interlock Unit

Transcript:

DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery: up to m /h Head: up to m Maximum temperature of liquid: C Maximum immersion depth: m Solids handling: mm Delivery flange: DN Power supply: three-phase and single-phase Hz Motor power: up to, kw Cable length: m Insulation class: H (8 C) Protection: IP8 MATERIALS Motor housing, oil chamber seals, pump body: Cast-iron Impeller (open with grinder assembly): Cast iron Grinder: Tempered stainless steel Shaft: Stainless steel Mechanical seal (dual) Motor side: Ceramic/carbon, Pump side: Silicon-carbide/silicon-carbide Gasket: Nitrile rubber, neoprene APPLICATIONS Industrial washing Filtration Industrial systems Wastewater Aggressive liquids ACCESSORIES Lowering system Supporting foot 9 discharge elbow Ball check valve For a complete list of technical information, consult www.lowara.co.uk

HYDRAULIC PERFORMANCE TABLE AT Hz PUMP Pgr (P) D Q = DELIVERY Passes TYPE (P) Nom Impeller l/min 7 7 8 7 7 8 7 solids kw kw mm min - m /h,8 7 8, 9 up to * ** H = TOTAL HEAD METRES COLUMN OF WATER (mm) DLGM - A,, 9,,7,,, 9,8 9, 8, 7,8 7,,,,,,9, DLGM -,, 9 7,,7,,,7,,7,,,,7,7 9, 8,,9, DLGM - A,9, 9,,,, 9,9 9, 8, 7,,7,8,9,,,,, DLGM -,, 9,,,,9,,,8 9,9 9, 8, 7,,,,,, DLG - A,, 9,,7,,, 9,8 9, 8, 7,8 7,,,,,,9, DLG -,, 9 7,,7,,,7,,7,,,,7,7 9, 8,,9, DLG - A,8, 9,,,, 9,9 9, 8, 7,,7,8,9,,,,, DLG -,, 9,,,,9,,,8 9,9 9, 8, 7,,,,,, DLG -8,, 9,,,, 9, 9, 8,7 8, 7,,9,,,8,,7 8,7 DLG - A, 9,,,,9,,9,,8, 9, 8, 7,7,,9,, DLG -,, 9 9, 7,8 7,7 7,,,,,9,,,8,8, 9, 7,, DLG - A, 7 9,,,,,,,,9,,, 9, 8, 7,,7, DLG -,7 8 9,,8,7, 9, 8,9 8, 7,7 7,,,,,,8, 8, DLGM -9,9, 8,,,,9,, 9,8 9, 8,8 8, 7,,,,,8, DLG -9,9, 8,,,,9,, 9,8 9, 8,8 8, 7,,,,,8, Performances according to ISO Standard 99 Annex A. These performances are valid for liquids with density ρ =. Kg/dm and kinematic viscosity ν = mm /sec. * Maximum value of absorbed motor power within the operating range. dlg_-en_b_th ** P = Rated shaft power. ELECTRICAL DATA TABLE AT HZ PUMP TYPE min - Pgr (P) kw * (P) Nom kw *** VOLTAGE / PHASES NOMINAL I n (A) CURRENT INRUSH ABSORBED I sp (A) I abs (A) START ELECTRICAL CABLE TYPE CAPACITOR V RUN / START µ F STATOR THERMAL PROTECT. ** WATER SENSOR IN OIL CHAMBER ** DLGM - A 9,, V/ 8, -,9 - G. / DLGM - 9,7, V/ 8, - 8, - G. / DLGM - A 9, V/,7-9,8 - G. / DLGM - 9,, V/,7 -,7 - G. / DLG - A 9,, V/, 7,, DOL G. - DLG - 9,, V/, 7,, DOL G. - DLG - A 9,8, V/,,,9 DOL G. - DLG - 9,, V/,,, DOL G. - DLG -8 9,, V/,, DOL G. - DLG - A 9, V/,,,8 DOL G. - DLG - 9,, V/,,, DOL G. - DLG - A 9, V/ 8,,9 YD 7G. - DLG - 9,7 V/ 8, 8, YD 7G. - DLGM -9,9, V/, -, - G. / DLG -9,9, V/,7,,7 DOL G. - * Maximum value of absorbed motor power within the operating range. DLG-en_C_te ** Option available on request. *** P = Rated shaft power.

OPERATING CHARACTERISTICS AT Hz, POLES DLGM - A 9 [rpm] ISO 99 - Annex A DLGM - 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] Q [US 7 gpm] 8 8 8.......7. 8 Q [m /h] Q [l/s] _B_CH. 8 Q [m /h] Q [l/s] _B_CH DLGM - A 9 [rpm] ISO 99 - Annex A DLGM - 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] 8 Q [US 7 gpm] 7 8.... 8 Q [m /h] Q [l/s] _B_CH 8 Q [m /h] Q [l/s] 7_B_CH These performances are valid for liquids with density ρ =. kg/dm and kinematic viscosity ν = mm /s.

OPERATING CHARACTERISTICS AT Hz, POLES DLG - A 9 [rpm] ISO 99 - Annex A DLG - 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] Q [US 7 gpm] 8 Q [m /h] Q [l/s] 8_A_CH 8 Q [m /h] Q [l/s] 9_B_CH DLG - A 9 [rpm] ISO 99 - Annex A DLG - 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] 8 Q [US 7 gpm] 7 8 8 Q [m /h] Q [l/s] _B_CH 8 Q [m /h] Q [l/s] _B_CH These performances are valid for liquids with density ρ =. kg/dm and kinematic viscosity ν = mm /s.

OPERATING CHARACTERISTICS AT Hz, POLES DLGM -8 9 [rpm] ISO 99 - Annex A DLG - A 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] Q [US 7 gpm] 9 8 8 7 8 Q [m /h] Q [l/s] _B_CH 8 Q [m /h] Q [l/s] _B_CH DLG - 9 [rpm] ISO 99 - Annex A DLG - A 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] Q [US 7 gpm] 8..... 8 Q [m /h] Q [l/s] _B_CH 8 Q [m /h] Q [l/s] _B_CH These performances are valid for liquids with density ρ =. kg/dm and kinematic viscosity ν = mm /s.

- OPERATING CHARACTERISTICS AT Hz, & POLES DLG - 9 [rpm] ISO 99 - Annex A Q [US 7 gpm] 8 8 Q [m /h] Q [l/s] _B_CH Black and white technical books available see www.lowara.co.uk DLGM -9 [rpm] ISO 99 - Annex A DLG -9 [rpm] ISO 99 - Annex A Q [US 7 gpm] Q [US 7 gpm] 8 8...7.7. 8 Q [m /h] Q [l/s] 7_B_CH. 8 Q [m /h] Q [l/s] 8_B_CH These performances are valid for liquids with density ρ =. kg/dm and kinematic viscosity ν = mm /s. 7

DLG SERIES (DN) DS DIMENSIONS AND WEIGHTS PUMP TYPE DIMENSIONS ( mm ) WEIGHT kg H H DLGM -A DLGM - DLGM -A DLGM - DLG -A DLG - DLG -A DLG - DLG -8 DLG -A DLG - DLG -A DLG - DLGM -9 DLG -9 DLG-DS--p-en_b_td 8

DLG SERIES (DN) DSA DIMENSIONS AND WEIGHTS PUMP TYPE DIMENSIONS ( mm ) WEIGHT kg H H DLGM -A DLGM - DLGM -A DLGM - DLG -A DLG - DLG -A DLG - DLG -8 DLG -A DLG - DLG -A DLG - DLGM -9 DLG -9 DLG-DS--p-en_b_td 9