GENERAL PURPOSE TRANSFORMERS 2 Watt Pulse, Electrostatically Shielded, 500 mw Pulse, RF Pulse, and Control Transformers

Σχετικά έγγραφα
POWER OVER ETHERNET (PoE) MAGNETICS

LAN ISOLATION TRANSFORMER CATALOG

T1/CEPT/ISDN-Pri Transformers

PRELIMINARY DATA SHEET NPN EPITAXIAL SILICON TRANSISTOR FOR MICROWAVE HIGH-GAIN AMPLIFICATION

NPN SILICON OSCILLATOR AND MIXER TRANSISTOR

DATA SHEET Surface mount NTC thermistors. BCcomponents

Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION

3 V, 900 MHz LOW NOISE SI MMIC AMPLIFIER

3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER

Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W

3 V, 900 MHz Si MMIC AMPLIFIER

Metal Oxide Varistors (MOV) Data Sheet

ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013

SURFACE MOUNT NPN SILICON HIGH FREQUENCY TRANSISTOR

AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM

High Current Chip Ferrite Bead MHC Series

2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER

Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH

SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)

SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)

ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012

SMD Power Inductor-VLH

1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T

Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH

SMD Power Inductor-VLH

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R

Multilayer Ceramic Chip Capacitors

Metal Oxide Leaded Film Resistor

Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

NPI Unshielded Power Inductors

Multilayer Ceramic Chip Capacitors

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of

Metal Oxide Leaded Film Resistor

Thin Film Chip Resistors

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

Transient Voltage Suppressor

T1/E1/CEPT/ISDN-PRI DUAL & SINGLE CORE THRU-HOLE TRANSORMERS

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C

High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)

Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.

MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

SAW FILTER - RF RF SAW FILTER

Precision Metal Film Fixed Resistor Axial Leaded

Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency

Unshielded Power Inductors

Polymer PTC Resettable Fuse: KRG Series

High Frequency Chip Inductor / CF TYPE

VAR Series Zinc Oxide Varistor

± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.

B37631 K K 0 60

YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.

Data sheet Thin Film Chip Inductor AL Series

XKT. Metal Oxide Varistor FEATURES

Thin Film Chip Inductor

Chip Ferrite Bead MCB-S/B Series

Carbon Film Leaded Resistor

RoHS ASPI. Test Condition. DCR IDC Marking

NPIS Shielded Power Inductors

Low Value Multilayer Inductors (LMCI Series)

Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of

Bulletin 1489 UL489 Circuit Breakers

Fixed Inductors / AL TYPE

SMD Transient Voltage Suppressors

Multilayer Chip Inductor

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

NPN SILICON GENERAL PURPOSE TRANSISTOR

NTC thermistors for temperature measurement

Metal Film Leaded Precision Resistor

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)

RF series Ultra High Q & Low ESR capacitor series

SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions

AVX SMD Power Inductors

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage

NTC Thermistor:TSM type

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

Symbol. Parameter Value Unit. IPP See Next Table A IFSM

I. Product Selection Guide IV. SMT Balun Transformers 0303 & 0604 Series...161

Fixed Inductors / AL TYPE

NPN Silicon RF Transistor BFQ 74

MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Metal Film Leaded Precision Resistor

Current Sense Metal Strip Resistors (CSMS Series)

High Frequency Ceramic Inductors TLNMH0603P Series

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

Transcript:

Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available in through hole and surface mount packages Electrical Specifications @ C Operating Temperature 0 C to 70 C Primary Primary Turns Rise PRI/SEC * Leakage Sine Wave ET- Inductance DCR DCR DCR Schematic/ Ratio Time Cww Primary Secondary Tertiary Hi-Pot Number OCL Constant PRI/SEC (Vrms) Package (±%) (ns MAX) (pf MAX) (Ω MAX) (Ω MAX) (Ω MAX) Style (mh MIN) (V-µs MIN) (µh MAX) WATT PULSE PE-7X : 0. 8.7.3. 700 TH PE-8X :.3 8 30 0 3.0 3. 3.8 700 TH PE-3X : 0.0 0 80 87 0. 7.0 8.0 700 TH PE-90X :.0 70 0 3.. 3. 700 TH PE-9X ::.3 9 30 38 3. 3. 3.8 3.9 700 TH PE-3X ::.0 9 70 3 3.0 8.8 9..0 700 TH PE-7X :: 0. 3 0 7.7. 0..3 700 TH ELECTROSTATICALLY SHIELDED PE-X : 0. 9 7.7 3... 700 TH PE-X :. 77 9..8.. 700 TH PE-0X : 0.0 00..0.0.0 700 TH PE-9X ::.0 77 9. 3.... 700 TH PE-8X CT:CT.0 77 3...8.8 700 TH3 PE-3X CT:CT 0.0 0..7.0.0 700 TH3 *NOTE: for Electrostatically Shielded Transformers, C ww is measured with shield corrected to guard voltage. Schematics TH TH TH3 TH TH 7 8 7 8 7 8 8 7 8 WINDING WINDING WITH SHIELD 7 WINDING WITH CT AND SHIELD WITH SHIELD 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL 9-7-800 FAX 9-7-8 http://www.pulseeng.com G008.A (8/97)

00 mw Pulse Number TH Turns Ratio (±%) 00 MW PULSE 3 Electrical Specifications @ 0º C Operating Temperature 0ºC to 70ºC Primary Primary Leakage Rise PRI/SEC DCR DCR DCR Schematic Sine Wave ET- Inductance Hi Pot Time Cww Primary Secondary Tertiary Package OCL Constant PRI/SEC Vrms (mh MIN) (V-µs MIN) (ns MAX) (pf MAX) (µh MAX) (Ω MAX) (Ω MAX) (Ω MAX) Style PE-70 ::.0.0 0. 70.3 3.9 3.9 3.9 00 TH PE-7 ::.0.0 8. 37 0.8... 00 TH PE-7 :: 0. 8..3 3 0..3.3.3 00 TH PE-73 :: 0..0. 8 0.3 0.9 0.9 0.9 00 TH PE-7 :: 0.0.. 8 0..3.3.3 00 TH PE-79 :: 0. 8....3 0.7 0.7 00 TH PE-870 CT:CT.0.0 37 0.8.. 700 TH7 PE-87 CT:CT 0. 8. 3 0..3.3 00 TH7 PE-87 CT:CT 0..0. 8 0.3 0.9 0.9 700 TH7 PE-87 CT:CT.0.0 9.8.. 00 TH7 PE-877 CT:CT 0. 8... 0.8 700 TH7 PE-0.:. 0.0 0.0 3 0.8 0.8 0.7 00 TH8 3Z8 :: dual.08. 3.0 9. 0. 0.0 00 TH9 Z03 ::.0 0. 0.3 3.9 3.9 3.9 00 TH Z ::.0.0 9.8... 00 TH PE-7M :: 0..0. 0.3 0.9 0.9 0.9 00 SM PE-73M :: 0..0 3. 8 0. 0.7 0.7 0.7 00 SM PE-79M :: 0..0. 8 0.3 0.9 0. 0. 00 SM PE-87M CT:CT 0..0. 8 0.3 0.9 0.9 00 SM PE-87M CT:CT 0..0 3. 0. 0.7 0.7 00 SM PE-877M CT:CT 0..0.0 8 0.7 0.9 0. 00 SM 3Z8SM :: dual.08. 3.0 9. 0. 0.0 00 SM3 3Z87SM ::.08. 3.0 9. 0. 0.0 00 SM NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-79MT). The "T" will appear on all paper work, but will not be marked on parts. TH7 Schematics TH8 TH9 3 3 9 7 8 3 0 WINDING WITH CT WINDING DUAL SM 3 SM SM3 3 3 9 7 8 3 WINDING WITH CT DUAL 0 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL 98 9-7-800 TEL 9-7-800 FAX 9-7-8 FAX 9-7-8 http://www.pulseeng.com G008.A (8/97)

Watt Pulse, Electrostatically Shielded, and 00 mw Pulse Transformers TH to TH TH: WINDING Mechanicals TH/TH: WINDING WITH SHIELD OR TH3/TH: WINDING WITH CT AND SHIELD OR WITH SHIELD 7.0 MAX, CTRY ORIGIN 8.3 MAX,.00,70 7,.00 TYP.00,70 7, 7,.00,70.00 TYP 7, MAX 0,.00 MIN,70 # AWG SOLDERABLE LEADS.0 MIN 0, BOTTOM VIEWS Weight Number (Grams) Tube TH*/TH 3.9 TH3/TH. TH.0 *Except PE-90X. Unless otherwise specified, all tolerances are ±.00 0, TH to TH8 TH9.00 MAX,70 3 COUNTRY OF ORIGIN.00 MIN,70.30 MAX 8,89.0 MAX,3.070 MIN,78 # AWG SOLDERABLE LEADS TH8: WINDING 0, BOTTOM VIEWS Weight Number (Grams) TH/TH7: OR WINDING WITH CT 0,.00 Tube TH*.3 0/7* TH7 (PE-870, PE-87, PE-87). 0 TH7 (PE-87,PE-877).3 0 TH8. 0 *NOTE: TH (Z03/Z) Unless otherwise specified, all tolerances are ±.00 0, 3Z8 Date Code Country of Origin.800 0,3.08 TYP 0,.8 7,.0 MIN 0,38.00 TYP.00 ±.00, 0,. ±.00 3,8.0,.0 MAX,3.30 ±.00 8, 0, Weight....g Tube... 8/tube Unless otherwise specified, all tolerances are ±.00 0,3 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL 9-7-800 FAX 9-7-8 http://www.pulseeng.com 3 G008.A (8/97)

Watt Pulse, Electrostatically Shielded, and 00 mw Pulse Transformers SM & SM. 0, 300 7, (except 3Z87SM) 7, PE-XXXXSM CNTRY OF ORIGIN.00 TYP.0 0,.90 7,37.070,78.00.30 0,9 Mechanicals 3Z87SM.08 TYP 0, 3Z87SM Date Code Country of Origin.30,8.030 0,7.00.,73.0,0.070,78 0,.00 TYP,7.00/.0 0,/0,38 0-8., 0-8 Unless otherwise specified, all tolerances are ±.00 0,.00/0,0 SURFACES.08/.00 TYP 0,/0,.00,0 Weight (Grams) Tape & Reel.00/.00 0,3/0, Tube SM 0. 00 SM: PE-87M 0.7 00 0 PE-87M 0.7 00 PE-877M 0. 00 Except 3Z87SM 0. 70 00.00.00 TYP,7.00 MIN 0,.30 9, Unless otherwise specified, all tolerances are ±.00 0,3 SM3.00.070,78.030 0,7.0,0 0, 3Z8SM Date Code Country of Origin.0,3.08 TYP 0,.00 TYP,7 7,.,73., 0-8 Weight... 0.9 g Tube... 0/tube Tape & Reel... 70/reel.00/.00 0,3/0,.00 TYP,7 7,.00 MIN 0,.30 9, Unless otherwise specified, all tolerances are ±.00 0,3 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL 98 9-7-800 TEL 9-7-800 FAX 9-7-8 FAX 9-7-8 http://www.pulseeng.com G008.A (8/97)

RF Pulse Designed for use in 0 Ω Wideband IC applications Characterized for Pulse and wide band use at 0 Ω impedance Standard -pin DIP package or ThinSet surface mount package Number SURFACE MOUNT* Turns Ratio (±%) Primary Primary PRI/SEC Bandwidth Schematic/ Pulse ET- PRI/SEC Leakage Primary Secondary for -3 db Loss Package Inductance Constant Cww Inductance DCR DCR Low Freq High Freq Style (µh MIN) (v-µs MIN) (pf MAX) (µh MAX) (Ω MAX) (Ω MAX) (MHz) (MHz) PE-7 CT:CT 80. 0.8 0.0 0.0 0.0 90 A / SMT PE-9 CT:CT 0.0 0. 0.0 0.30 0.0 0 A / SMT 3Z7SMD :CT 80. 0.8 0.0 0.0 0.0 90 B / SMT THROUGH HOLE Electrical Specifications @ C Operating Temperature 0 C to 70 C PE-A : 0. 0. 0.0 0.0 0.0 0 C / TH0 PE-A CT:CT 0. 0.8 0.0 0.0 0.0 90 D / TH0 PE-0A :CT.0 0. 0.0 0.30 0.0 0 B / TH0 PE-A : CT 0. 8 0.0 0.0 0.30 0.0 80 B / TH0 PE-A :CT 0. 0 0.0 0.0 0.0 0.0 0 B / TH0 *NOTE: To order Tape & Reel packaging for surface mount parts, add the suffix "T" to the part number. (Example: PE-7T). The "T" will appear on all paper work, but will not be marked on parts. Schematics A B C D 3 3 3 3 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL 9-7-800 FAX 9-7-8 http://www.pulseeng.com G008.A (8/97)

RF Pulse SMT.30 MAX 8,.8 7, COUNTRY OF ORIGIN 3.00.098,0 MAX.0,0 MAX.00/0,3 Surfaces Mechanicals.00,.00,7.,7.00 PE-7 PE-9 Weight... 0. grams... 0. grams Tube... 0/tube... 0/tube Tape & Reel... 00/reel... 00/reel Unless otherwise specified, all tolerances are ±.00 0, SMT.030 0,7.080,03 TH0.08 TYP 0,.0,0 0, COUNTRY OF ORIGIN.7 MAX,99 3Z7SMD Date Code Country of Origin 7,.,73.00 TYP.30 9,.00 TYP 3 MAX 7,. MAX,.0,33.00/.00 0,3/0,.00 TYP 0, Weight... 0. grams Tube... 7/tube Tape & Reel... 70/reel Unless otherwise specified, all tolerances are ±.00 0,3 0-8.00.30 3,30 MIN 7,.30 MAX 8,89 Weight... 0. grams Tube... /tube Unless otherwise specified, all tolerances are ±.00 0, 0 WORLD 0 WORLD TRADE DRIVE, TRADE SAN DRIVE, DIEGO, SAN CALIFORNIA DIEGO, CALIFORNIA 98 TEL 98 9-7-800 TEL 9-7-800 FAX 9-7-8 FAX 9-7-8 http://www.pulseeng.com G008.A (8/97)

Control Transformers Recognized component Underwriter s Laboratories, Inc. High dielectric strength capability for industrial applications High ET product allows long pulse width Number Electrical Specifications @ C Operating Temperature 0 C to 70 C Turns Primary Sine Primary PRI/SEC PRI/SEC Primary Secondary Hi Pot* Schematic/ Ratio Wave OCL ET-Constant Cww Leakage DCR DCR PRI/SEC Package (±0%) (mh MIN) (V-µs MIN) (pf MAX) Inductance (Ω MAX) (Ω MAX) (Vrms) Style PE-00 :.0 30 30.0.8 3. 00 A/TH PE-003 : 0. 80.0. 0.9 00 A/TH PE-00 :: 0. 80 30.0. 00 A/TH PE-007 ::.0 30 3.0.8 3. 00 A/TH PE-008 ::.0 8 80.0.0 7. 00 A/TH PE-0 :.0 700 3.0 3.0 3. 00 B/TH PE-0 :.0 00 30.0.3 7.0 00 B/TH PE-07 :.0 700 3.0 3.0.0 00 B/TH PE-08 :.0 00.0.3.0 00 B/TH PE-09 :: 0. 90 3.7.. 00 B/TH PE-03 ::.0 700 0 7.0 3.0.0 00 B/TH *NOTE: PE-00 PE-03 Hi Pot SEC/SEC 300 Vrms. Average Power Rating: Watts. UL-78 Recognized, File Number E. Schematics A B 3 WINDING 0 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 98 TEL 9-7-800 FAX 9-7-8 http://www.pulseeng.com 7 G008.A (8/97)

Control Transformers Mechanicals TH.70 MAX 9,0 WINDING 0, 3 CNTRY OF ORIGIN.70 MAX 9,0.00,.00, BOTTOM VIEWS.00 MAX,70.00 MIN,70.00 0,0 TH0 Except PE-003 Weight... 8. grams... 8. grams Tube... /tube... /tube Unless otherwise specified, all tolerances are ±.00 0, TH WINDING 3 CNTRY OF ORIGIN.90 MAX 3,87 0,.77 MAX 9,8.00,70 BOTTOM VIEWS.00,70 For More Information : Corporate 0 World Trade Drive San Diego, CA 98 Tel: 9 7 800 FAX: 9 7 8 http://www.pulseeng.com Quick-Facts: 9 7 97.80 MAX 0,8.00 MIN,70.00 MIN 0,0 Europe Millpool House Mill Lane, Godalming Surrey GU7 EY U.K. Tel: 83 8 877 FAX: 83 0 Weight Number (Grams) PE-0 PE-0 PE-07 PE-08 Tube.9 0. 0 PE-09.7 0 PE-03.8 0 Unless otherwise specified, all tolerances are ±.00 0, Asia P.O. Box -, KEPZ Central Sixth Road KEPZ, Kaohsiung Taiwan, R.O.C. Tel: 88 7 8 3 FAX: 88 7 8 9707 Distributor Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. 997, Pulse Engineering, Inc. G008.A (8/97)