WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
|
|
|
- Νῶε Δασκαλόπουλος
- 5 χρόνια πριν
- Προβολές:
Transcript
1 WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@ 25.2MHz 10,5 20@ 25.2MHz White 0805CS-151E_FS 0.15@ 25.2MHz 10,5 20@ 25.2MHz Black 0805CS-181E_FS 0.18@ 25.2MHz 10,5 20@ 25.2MHz Brown 0805CS-221E_FS 0.22@ 25.2MHz 10,5 20@ 25.2MHz Red 0805CS-271E_FS 0.27@ 25.2MHz 10,5 20@ 25.2MHz Orange 0805CS-331E_FS 0.33@ 25.2MHz 10,5 20@ 25.2MHz Yellow 0805CS-391E_FS 0.39@ 25.2MHz 10,5 20@ 25.2MHz Green 0805CS-471E_FS 0.47@ 25.2MHz 10,5 20@ 25.2MHz Blue 0805CS-561E_FS 0.56@ 25.2MHz 10,5 20@ 25.2MHz Violet 0805CS-681E_FS 0.68@ 25.2MHz 10,5 20@ 25.2MHz Gray 0805CS-821E_FS 0.82@ 25.2MHz 10,5 20@ 25.2MHz White 0805CS-102E_FS 1.00@ 7.96MHz 10,5 15@ 7.96MHz Black 0805CS-122E_FS 1.20@ 7.96MHz 10,5 15@ 7.96MHz Brown 0805CS-152E_FS 1.50@ 7.96MHz 10,5 15@ 7.96MHz Red 0805CS-182E_FS 1.80@ 7.96MHz 10,5 15@ 7.96MHz Orange 0805CS-222E_FS 2.20@ 7.96MHz 10,5 15@ 7.96MHz Yellow 0805CS-272E_FS 2.70@ 7.96MHz 10,5 15@ 7.96MHz Green 0805CS-332E_FS 3.30@ 7.96MHz 10,5 15@ 7.96MHz Blue 0805CS-392E_FS 3.90@ 7.96MHz 10,5 15@ 7.96MHz Violet 0805CS-472E_FS 4.70@ 7.96MHz 10,5 15@ 7.96MHz Gray 0805CS-562E_FS 5.60@ 7.96MHz 10,5 15@ 7.96MHz White 0805CS-682E_FS 6.80@ 7.96MHz 10,5 15@ 7.96MHz Black 0805CS-822E_FS 8.20@ 7.96MHz 10,5 15@ 7.96MHz Brown 0805CS-103E_FS 2.52MHz 10,5 10@ 2.52MHz Red 0805HS-123E_FS 2.52MHz 10,5 15@ 2.52MHz Orange 0805HS-153E_FS 2.52MHz 10,5 15@ 2.52MHz Yellow 0805HS-183E_FS 2.52MHz 10,5 15@ 2.52MHz Green 0805HS-223E_FS 2.52MHz 10,5 15@ 2.52MHz Blue 0805HS-273E_FS 2.52MHz 10,5 15@ 2.52MHz Violet 0805HS-333E_FS 2.52MHz 10,5 15@ 2.52MHz Gray Working Temperature Range : -20 C ~ 80 C Shape & Dimension B C H E F A G F I Pad Layout I J K Terminal D A B C Max. Ref. Max. Ref. Max. Ref. D Ref. E Ref. F G H I J K Inch mm Parts/Reel: 7 2,000 PCS Tape Width: 8mm
2 WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~10µH) TYPICAL L vs FREQUENCY TYPICAL L vs DC CURRENT
3 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008CS (2520) Ferrite Series (0.12~100µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma 1008CS-121E_FS 25.2MHz 10,5 25.2MHz CS-151E_FS 25.2MHz 10,5 25.2MHz CS-181E_FS 25.2MHz 10,5 25.2MHz CS-221E_FS 25.2MHz 10,5 25.2MHz CS-271E_FS 25.2MHz 10,5 25.2MHz CS-331E_FS 25.2MHz 10,5 25.2MHz CS-391E_FS 25.2MHz 10,5 25.2MHz CS-471E_FS 25.2MHz 10,5 25.2MHz CS-561E_FS 25.2MHz 10,5 25.2MHz CS-681E_FS 25.2MHz 10,5 25.2MHz CS-821E_FS 25.2MHz 10,5 25.2MHz CS-102E_FS 7.96MHz 10,5 7.96MHz CS-122E_FS 7.96MHz 10,5 7.96MHz CS-152E_FS 7.96MHz 10,5 7.96MHz CS-182E_FS 7.96MHz 10,5 7.96MHz CS-222E_FS 7.96MHz 10,5 7.96MHz CS-272E_FS 7.96MHz 10,5 7.96MHz CS-332E_FS 7.96MHz 10,5 7.96MHz CS-392E_FS 7.96MHz 10,5 7.96MHz CS-472E_FS 7.96MHz 10,5 7.96MHz CS-562E_FS 7.96MHz 10,5 7.96MHz CS-682E_FS 7.96MHz 10,5 7.96MHz CS-822E_FS 7.96MHz 10,5 7.96MHz CS-103E_FS 2.52MHz 10,5 2.52MHz CS-123E_FS 2.52MHz 10,5 2.52MHz CS-153E_FS 2.52MHz 10,5 2.52MHz CS-183E_FS 2.52MHz 10,5 2.52MHz CS-223E_FS 2.52MHz 10,5 2.52MHz CS-273E_FS 2.52MHz 10,5 2.52MHz CS-333E_FS 2.52MHz 10,5 2.52MHz CS-393E_FS 2.52MHz 10,5 2.52MHz CS-473E_FS 2.52MHz 10,5 2.52MHz CS-563E_FS 2.52MHz 10,5 2.52MHz CS-683E_FS 2.52MHz 10,5 2.52MHz CS-823E_FS 2.52MHz 10,5 2.52MHz CS-104E_FS 0.796MHz 10, MHz Working Temperature : -20 C ~ 80 C
4 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008CS (2520) Ferrite Series (0.12~100µH) Shape & Dimension B C H A F G F Pad Layout J I I K D Terminal A B C Max. Ref. Max. Ref. Max. Ref. D Ref. K F G H I J Inch mm Parts/Reel: 7 2,000 PCS Tape Width: 8mm
5 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008CS (2520) Ferrite Series (0.12~100µH) TYPICAL L vs FREQUENCY TYPICAL L vs DC CURRENT
6 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008HS (2520) Ferrite Series (0.12~100µH) Part Number Inductance uh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max 1008HS-121E_FS 25.2MHz 10,5 25.2MHz HS-151E_FS 25.2MHz 10,5 25.2MHz HS-181E_FS 25.2MHz 10,5 25.2MHz HS-221E_FS 25.2MHz 10,5 25.2MHz HS-271E_FS 25.2MHz 10,5 25.2MHz HS-331E_FS 25.2MHz 10,5 25.2MHz HS-391E_FS 25.2MHz 10,5 25.2MHz HS-471E_FS 25.2MHz 10,5 25.2MHz HS-561E_FS 25.2MHz 10,5 25.2MHz HS-681E_FS 25.2MHz 10,5 25.2MHz HS-821E_FS 25.2MHz 10,5 25.2MHz HS-102E_FS 7.96MHz 10,5 7.96MHz HS-122E_FS 7.96MHz 10,5 7.96MHz HS-152E_FS 7.96MHz 10,5 7.96MHz HS-182E_FS 7.96MHz 10,5 7.96MHz HS-222E_FS 7.96MHz 10,5 7.96MHz HS-272E_FS 7.96MHz 10,5 7.96MHz HS-332E_FS 7.96MHz 10,5 7.96MHz HS-392E_FS 7.96MHz 10,5 7.96MHz HS-472E_FS 7.96MHz 10,5 7.96MHz HS-562E_FS 7.96MHz 10,5 7.96MHz HS-682E_FS 7.96MHz 10,5 7.96MHz HS-822E_FS 7.96MHz 10,5 7.96MHz HS-103E_FS 2.52MHz 10,5 2.52MHz HS-123E_FS 2.52MHz 10,5 2.52MHz HS-153E_FS 2.52MHz 10,5 2.52MHz HS-183E_FS 2.52MHz 10,5 2.52MHz HS-223E_FS 2.52MHz 10,5 2.52MHz HS-273E_FS 2.52MHz 10,5 2.52MHz HS-333E_FS 2.52MHz 10,5 2.52MHz HS-393E_FS 2.52MHz 10,5 2.52MHz HS-473E_FS 2.52MHz 10,5 2.52MHz HS-563E_FS 2.52MHz 10,5 2.52MHz HS-683E_FS 2.52MHz 10,5 2.52MHz HS-823E_FS 2.52MHz 10,5 2.52MHz HS-104E_FS 100.@ 0.796MHz 10, MHz Working Temperature : -20 C ~ 80 C ma
7 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008HS (2520) Ferrite Series (0.12~100µH) Shape & Dimension B C H A F G Pad J I F Layout K D I Terminal A B C D Max. Ref Max. Ref Max. Ref Ref. K F G H I J inch mm Parts/Reel: 7 2,000 PCS Tape Width:8mm
8 M WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1008HS (2520) Ferrite Series (0.12~100µH) TYPICAL L vs FREQUENCY TYPICAL L vs DC CURRENT
9 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210CS (322522) Ferrite Series (0.12~220µH) Part Inductance Percent SRF Min RDC Max IDC Max Q Min Number µh Tolerance MHz Ohms ma 1210CS-101E_FS 100MHz 10,5 100MHz CS-121E_FS 25.2MHz 10,5 25.2MHz CS-151E_FS 25.2MHz 10,5 25.2MHz CS-181E_FS 25.2MHz 10,5 25.2MHz CS-221E_FS 25.2MHz 10,5 25.2MHz CS-271E_FS 25.2MHz 10,5 25.2MHz CS-331E_FS 25.2MHz 10,5 25.2MHz CS-391E_FS 25.2MHz 10,5 25.2MHz CS-471E_FS 25.2MHz 10,5 25.2MHz CS-561E_FS 25.2MHz 10,5 25.2MHz CS-681E_FS 25.2MHz 10,5 25.2MHz CS-821E_FS 25.2MHz 10,5 25.2MHz CS-102E_FS 7.96MHz 10,5 7.96MHz CS-122E_FS 7.96MHz 10,5 7.96MHz CS-152E_FS 7.96MHz 10,5 7.96MHz CS-182E_FS 7.96MHz 10,5 7.96MHz CS-222E_FS 7.96MHz 10,5 7.96MHz CS-272E_FS 7.96MHz 10,5 7.96MHz CS-332E_FS 7.96MHz 10,5 7.96MHz CS-392E_FS 7.96MHz 10,5 7.96MHz CS-472E_FS 7.96MHz 10,5 7.96MHz CS-562E_FS 7.96MHz 10,5 7.96MHz CS-682E_FS 7.96MHz 10,5 7.96MHz CS-822E_FS 7.96MHz 10,5 7.96MHz CS-103E_FS 2.52MHz 10,5 2.52MHz CS-123E_FS 2.52MHz 10,5 2.52MHz CS-153E_FS 2.52MHz 10,5 2.52MHz CS-183E_FS 2.52MHz 10,5 2.52MHz CS-223E_FS 2.52MHz 10,5 2.52MHz CS-273E_FS 2.52MHz 10,5 2.52MHz CS-333E_FS 2.52MHz 10,5 2.52MHz CS-393E_FS 2.52MHz 10,5 2.52MHz CS-473E_FS 2.52MHz 10,5 2.52MHz CS-563E_FS 2.52MHz 10,5 2.52MHz CS-683E_FS 2.52MHz 10,5 2.52MHz CS-823E_FS 2.52MHz 10,5 2.52MHz CS-104E_FS 0.796MHz 10, MHz CS-124E_FS 0.796MHz 10, MHz CS-154E_FS 0.796MHz 10, MHz CS-184E_FS 0.796MHz 10, MHz CS-224E_FS 0.796MHz 10, MHz Working Temperature : -20 C ~ 80 C
10 ` WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210CS (322522) Ferrite Series (0.12~220µH) Shape & Dimension B C H A F G Pad J I Layout F K D I A B C D K F G H I J Ref. Max. Ref Max. Ref Max. Ref inch mm Parts/Reel: 7 1,000 PCS Tape Width: 8mm Terminal
11 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210CS (322522) Ferrite Series (0.12~220µH) TYPICAL L vs FREQUENCY TYPICAL L vs DC CURRENT
12 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210HS (322522) Ferrite Series (0.12~220µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma 1210HS-121E_FS 25.2MHz 20,10,5 25.2MHz HS-151E_FS 25.2MHz 20,10,5 25.2MHz HS-181E_FS 25.2MHz 20,10,5 25.2MHz HS-221E_FS 25.2MHz 20,10,5 25.2MHz HS-271E_FS 25.2MHz 20,10,5 25.2MHz HS-331E_FS 25.2MHz 20,10,5 25.2MHz HS-391E_FS 25.2MHz 20,10,5 25.2MHz HS-471E_FS 25.2MHz 20,10,5 25.2MHz HS-561E_FS 25.2MHz 20,10,5 25.2MHz HS-681E_FS 25.2MHz 20,10,5 25.2MHz HS-821E_FS 25.2MHz 20,10,5 25.2MHz HS- 102E_FS 7.96MHz 20,10,5 7.96MHz HS- 122E_FS 7.96MHz 20,10,5 7.96MHz HS- 152E_FS 7.96MHz 20,10,5 7.96MHz HS- 182E_FS 7.96MHz 20,10,5 7.96MHz HS- 222E_FS 7.96MHz 20,10,5 7.96MHz HS- 272E_FS 7.96MHz 20,10,5 7.96MHz HS- 332E_FS 7.96MHz 20,10,5 7.96MHz HS- 392E_FS 7.96MHz 20,10,5 7.96MHz HS- 472E_FS 7.96MHz 20,10,5 7.96MHz HS- 562E_FS 7.96MHz 20,10,5 7.96MHz HS- 682E_FS 7.96MHz 20,10,5 7.96MHz HS- 822E_FS 7.96MHz 20,10,5 7.96MHz HS- 103E_FS 2.52MHz 20,10,5 2.52MHz HS- 123E_FS 2.52MHz 20,10,5 2.52MHz HS- 153E_FS 2.52MHz 20,10,5 2.52MHz HS- 183E_FS 2.52MHz 20,10,5 2.52MHz HS- 223E_FS 2.52MHz 20,10,5 2.52MHz HS- 273E_FS 2.52MHz 20,10,5 2.52MHz HS- 333E_FS 2.52MHz 20,10,5 2.52MHz HS- 393E_FS 2.52MHz 20,10,5 2.52MHz HS- 473E_FS 2.52MHz 20,10,5 2.52MHz HS- 563E_FS 2.52MHz 20,10,5 2.52MHz HS- 683E_FS 2.52MHz 20,10,5 2.52MHz HS- 823E_FS 2.52MHz 20,10,5 2.52MHz HS- 104E_FS 0.796MHz 20,10, MHz HS- 124E_FS 0.796MHz 20,10, MHz HS- 154E_FS 0.796MHz 20,10, MHz HS- 184E_FS 0.796MHz 20,10, MHz HS- 224E_FS 0.796MHz 20,10, MHz Working Temperature : -20 C ~ 80 C
13 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210HS (322522) Ferrite Series (0.12~220µH) Shape & Dimension B C H A F G Pad J I Layout F K D I A B C D K F G H I J Ref. Max. Ref Max. Ref Max. Ref inch mm Parts/Reel: 7 1,000 pcs Tape Width:8mm Terminal
14 WIRE-WOUND CHIP INDUCTOR FERRITE/OPEN TYPE 1210HS (322522) Ferrite Series (0.12~220µH) TYPICAL L vs FREQUENCY TYPICAL L vs DC CURRENT
15 Part Number WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1210MS (3225) Ferrite Series (0.12 ~ 220µH) Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma 1210MS-R12E_FS 25.2MHz 20,10,5 25.2MHz MS-R15E_FS 25.2MHz 20,10,5 25.2MHz MS-R18E_FS 25.2MHz 20,10,5 25.2MHz MS-R22E_FS 25.2MHz 20,10,5 25.2MHz MS-R27E_FS 25.2MHz 20,10,5 25.2MHz MS-R33E_FS 25.2MHz 20,10,5 25.2MHz MS-R39E_FS 25.2MHz 20,10,5 25.2MHz MS-R47E_FS 25.2MHz 20,10,5 25.2MHz MS-R56E_FS 25.2MHz 20,10,5 25.2MHz MS-R68E_FS 25.2MHz 20,10,5 25.2MHz MS-R82E_FS 25.2MHz 20,10,5 25.2MHz MS-1R0E_FS 7.96MHz 20,10,5 7.96MHz MS-1R2E_FS 7.96MHz 20,10,5 7.96MHz MS-1R5E_FS 7.96MHz 20,10,5 7.96MHz MS-1R8E_FS 7.96MHz 20,10,5 7.96MHz MS-2R2E_FS 7.96MHz 20,10,5 7.96MHz MS-2R7E_FS 7.96MHz 20,10,5 7.96MHz MS-3R3E_FS 7.96MHz 20,10,5 7.96MHz MS-3R9E_FS 7.96MHz 20,10,5 7.96MHz MS-4R7E_FS 7.96MHz 20,10,5 7.96MHz MS-5R6E_FS 7.96MHz 20,10,5 7.96MHz MS-6R8E_FS 7.96MHz 20,10,5 7.96MHz MS-8R2E_FS 7.96MHz 20,10,5 7.96MHz MS-100E_FS 2.52MHz 20,10,5 2.52MHz MS-120E_FS 2.52MHz 20,10,5 2.52MHz MS-150E_FS 2.52MHz 20,10,5 2.52MHz MS-180E_FS 2.52MHz 20,10,5 2.52MHz MS-220E_FS 2.52MHz 20,10,5 2.52MHz MS-270E_FS 2.52MHz 20,10,5 2.52MHz MS-330E_FS 2.52MHz 20,10,5 2.52MHz MS-390E_FS 2.52MHz 20,10,5 2.52MHz MS-470E_FS 2.52MHz 20,10,5 2.52MHz MS-560E_FS 2.52MHz 20,10,5 2.52MHz MS-680E_FS 2.52MHz 20,10,5 2.52MHz MS-820E_FS 2.52MHz 20,10,5 2.52MHz MS-101E_FS 0.796MHz 20,10, MHz MS-121E_FS 0.796MHz 20,10, MHz MS-151E_FS 0.796MHz 20,10, MHz MS-181E_FS 0.796MHz 20,10, MHz MS-221E_FS 0.796MHz 20,10, MHz Working Temperature : -20 C ~ 85 C
16 WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1210MS (3225) Ferrite Series (0.12 ~ 220µH) Shape & Dimension B A H C F Pad Layout J I D E E I Terminal A B C D E F H I J Inch 0.125± ± ± ± ± ± mm 3.2± ± ± ± ± ± Parts/Reel: 7 1,000 PCS Tape Width:8mm
17 WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1210MS (3225) Ferrite Series Typical Electrical Characteristics TYPICAL L vs FREQUENCY Inductance(nH) R0 R Frequency(MHz) TYPICAL Q vs FREQUENCY R0 R68 Q Frequency(MHz)
18 WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1812MS (4532) Ferrite Series (0.10 ~ 1000µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma 1812MS-R10E_FS 25.2MHz 20, MHz MS-R12E_FS 25.2MHz 20, MHz MS-R15E_FS 25.2MHz 20, MHz MS-R18E_FS 25.2MHz 20, MHz MS-R22E_FS 25.2MHz 20, MHz MS-R27E_FS 25.2MHz 20, MHz MS-R33E_FS 25.2MHz 20, MHz MS-R39E_FS 25.2MHz 20, MHz MS-R47E_FS 25.2MHz 20, MHz MS-R56E_FS 25.2MHz 20, MHz MS-R68E_FS 25.2MHz 20, MHz MS-R82E_FS 25.2MHz 20, MHz MS-1R0E_FS 7.96MHz 20,10,5 7.96MHz MS-1R2E_FS 7.96MHz 20,10,5 7.96MHz MS-1R5E_FS 7.96MHz 20,10,5 7.96MHz MS-1R8E_FS 7.96MHz 20,10,5 7.96MHz MS-2R2E_FS 7.96MHz 20,10,5 7.96MHz MS-2R7E_FS 7.96MHz 20,10,5 7.96MHz MS-3R3E_FS 7.96MHz 20,10,5 7.96MHz MS-3R9E_FS 7.96MHz 20,10,5 7.96MHz MS-4R7E_FS 7.96MHz 20,10,5 7.96MHz MS-5R6E_FS 7.96MHz 20,10,5 7.96MHz MS-6R8E_FS 7.96MHz 20,10,5 7.96MHz MS-8R2E_FS 7.96MHz 20,10,5 7.96MHz MS-100E_FS 2.52MHz 20,10,5 2.52MHz MS-120E_FS 2.52MHz 20,10,5 2.52MHz MS-150E_FS 2.52MHz 20,10,5 2.52MHz MS-180E_FS 2.52MHz 20,10,5 2.52MHz MS-220E_FS 2.52MHz 20,10,5 2.52MHz MS-270E_FS 2.52MHz 20,10,5 2.52MHz MS-330E_FS 2.52MHz 20,10,5 2.52MHz MS-390E_FS 2.52MHz 20,10,5 2.52MHz MS-470E_FS 2.52MHz 20,10,5 2.52MHz MS-560E_FS 2.52MHz 20,10,5 2.52MHz MS-680E_FS 2.52MHz 20,10,5 2.52MHz MS-820E_FS 2.52MHz 20,10,5 2.52MHz
19 WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1812MS (4532) Ferrite Series (0.10 ~ 1000µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma 1812MS- 101E_FS 0.796MHz 20,10, MHz MS- 121E_FS 0.796MHz 20,10, MHz MS- 151E_FS 0.796MHz 20,10, MHz MS- 181E_FS 0.796MHz 20,10, MHz MS- 221E_FS 0.796MHz 20,10, MHz MS- 271E_FS 0.796MHz 20,10, MHz MS- 331E_FS 0.796MHz 20,10, MHz MS- 391E_FS 0.796MHz 20,10, MHz MS- 471E_FS 0.796MHz 20,10, MHz MS- 561E_FS 0.796MHz 20,10, MHz MS- 681E_FS 0.796MHz 20,10, MHz MS- 821E_FS 0.796MHz 20,10, MHz MS- 102E_FS 1000@ 0.252MHz 20,10, MHz Working Temperature : -20 C ~ 85 C Shape & Dimension B A H C F Pad Layout J I D E E I Terminal A B C D E F H I J Inch 0.177± ± ± ± ± ± mm 4.5± ± ± ± ± ± Parts/Reel: PCS Tape Width: 12mm
20 WIRE-WOUND CHIP INDUCTOR FERRITE / MOLDING TYPE 1812MS (4532) Ferrite Series Typical Electrical Characteristics Inductance(nH) TYPICAL L vs FREQUENCY R Frequency(MHz) 100 TYPICAL Q vs FREQUENCY R8 R27 Q Frequency(MHz)
21 RELIABILITY TEST WIRE-WOUND CHIP INDUCTOR FERRITE MECHANICAL & ENVIRONMENTAL CHARACTERISTICS 0805CS; 1008CS/CC; 1210MS; 1812MS TEST ITEMS SPECIFICATIONS TEST CONDITIONS / TEST METHODS *ELECTRICAL PERFORMANCE TEST INDUCTANCE Q SRF DC RESISTANCE RDC RATED CURRENT IDC REF.ER TO STANDARD ELECTRICTAL CHARACTERISTIC LIST 0.12µH~82µH LCR METER HP 4291B 100µH~1000µH LCR METER HP 4294A 0.12µH~82µH LCR METER HP 4291B 100µH~1000µH LCR METER HP 4294A HP 4291B Micro-Ohmmeter (GOM-801G) APLIED THE CURRENT TO COILS, THE INDUCTANCE CHANGE SHOULD BE LESS THAN 10% TO INITIAL VALUE OVER LOAD TEST AFTER TEST, INDUCTORS SHALL BE NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE APPLIED 2 TIMES OF RATED ALLOWED DC CURRENT TO INDUCTOR FOR A PERIOD OF 5 MINUTE *MECHANICAL PERFORMANCE TEST RESISTANCE TO SOLDERING TEST COMPONENT ADHESIONN (PUSH TEST) DROP TEST 1.INDUCTORS SHOULD HAVE NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE 2.INDUCTANCE SHOULD NOT CHANGE MORE THAN ± 10% 3.Q SHOULD NOT CHANGE MORE THAN ± 20% 1 lbs. FOR 1210MS,1812MS 2 lbs. FOR FERRITE lbs. FOR FERRITE 1008 AFTER TEST,THE CHIP INDUCTOR DON T FELL OR BROKE ON THE P.C BOARD. INDUCTORS SHOULD BE REF.LOW TO A.P.C BOARD. USING 63Sn/37Pb SOLDER PASTE.SOLDER PROCESS SHOULD BE 230 FOR 20±2 SECONDS AND 260 FOR 5±2 SECONDS. THE DEVICE SHOULD BE REF.LOW SOLDERED (232 ± 5 FOR 10 SECONDS) TO A TINNED COPPER SUBSTRATE. A DYNOMETER FORCE GAUGE SHOULD BE APPLIED TO THE SIDE OF THE COMPONENT. THE DEVICE MUST WITHSTAND A MINIMUN FORCE OF 2 OR 4 POUNDS WITHOUT A FAILURE OF THE TERMINATION ATTACHED TO COMPONENT. DROP 1 TIME FOR EACH FACE AND 1 TIME FOR EACH CORNER.TOTAL DROP 10 TIMES. DROP HEIGHT :100 CM DROP WEIGHT :125 g SOLDERABILITY TEST THETERMINAL SHOULD AT LEAST BE 90% COVERED WITH SOLDER AFTER FLUXING(ALPHA 100 OR EQUIV), INDUCTOR SHALL BE DIPPED IN A MELTED SOLDER BATH AT 232 ±5 FOR 5 SECONDS. RESISTANCE TO SOLVENT TEST THERE SHALL BE NO CASE OF DEFORMATION CHANGE IN APPEARANCE OR OBLITERATION OF MARKING. MIL-STD202F, METHOD 215D DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) NO. 252, San-Ying Road, Kuei San Industrial Zone, Taoyuan Shien 333, TAIWAN, R.O.C. TEL: ; FAX:
22 *CLIMATIC TEST WIRE-WOUND CHIP INDUCTOR FERRITE MECHANICAL & ENVIRONMENTAL CHARACTERISTICS 0805CS; 1008CS/CC; 1210MS; 1812MS TEMPERATURE CHARACTERISTIC -40 ~ +85 HUMIDITY TEST 1. TEMP : 40 ± 2 2. R.H.: 90 95% 3. TIME: 96 ±2 HOURS LOW TEMPERATURE STORAGE TEST THERMAL SHOCK TEST HIGH TEMPERATURE STORAGE TEST 1.INDUCTORSSHAL HAVE NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE 2..INDUCTANCE SHALL NOT CHANGE MORE THAN ±10% 3. SHALL NOT CHANGE MORE THAN ±20% 1. TEMP: -40 ±2 2. TIME: 48 ±2 HOURS 3.INDUCTORS ARE TO BE TESTED AFTER 1HOUR AT ROOM TEMPERATURE. 15MINS TOTAL : 5 CYCLES ROOM TEMP -25 ±2 15MINS 30MINS ROOM TEMP 85 ±2 30MINS 1. TEMP : 85 ± 2 2. TIME : 48 ± 2 HOURS 3.INDUCTORS ARE TO BE TESTED AFTER 1HOUR AT ROOM TEMPERATURE. HIGH TEMPERATURE LOAD LIFE TEST LOW TEMPERATURE LOAD LIFE TEST THERE SHOULD BE NO EVIDENCE OF SHORT OR OPEN CIRCUIT 1. TEMP : 85 ± 2 2. TIME : 1000 ± 12 HOURS 3. LOAD : ALLOWED DC CURRENT 1. TEMP : -40 ± 2 2. TIME : 1000 ± 12 HOURS 3. LOAD : ALLOWED DC CURRENT NOTE : UNLESS OTHERWISE SPECIFIED, ALLOW THE SPECIMEN TO STAND AT ROOM TEMPERATURE FOR 1 HOUR OR MORE BUT NOT MORE THAN 2 HOURS, MEASURE THE ELECTRICAL AND MECHANICAL PERFORMANCES. DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) NO. 252, San-Ying Road, Kuei San Industrial Zone, Taoyuan Shien 333, TAIWAN, R.O.C. TEL: ; FAX:
23 Tape Dimensions (Unit:mm) T WIRE-WOUND CHIP INDUCTOR Taping Specifications φ /-0.0 PO P ± 0.1 B F W K A P Ceramic Ferrite Tape Dimensions (mm) Parts (pcs) A B K T F P P0 P1 W CS CS CS HS CT CT CQ CQ CC MS MS CS HS CS HS CS Reel Dimensions (Unit: mm) D:21.8 ± 0.8 Label 178 ± ± 0.2 D:13.0 ± ± 0.5 Leader / Trailer Tape (Unit: mm) Trailer End 2.0 ± ± ± 1.0 Leader End Trailer (80mm min.) Peel-off Force Peel-off force should be in the range of 0.1~0.6N at a peel-off speed of 300±10 mm/min DELTA ELECTRONICS, INC. Peeling Direction Empty Compartments with Cover Tape (100mm min.) (TAOYUAN PLANT CPBG) NO. 252, San-Ying Road, Kuei San Industrial Zone, Taoyuan Shien 333, TAIWAN, R.O.C. TEL: ; FAX: <10 0 Top Cover Tape Cover Tape Only (250mm min) Carrier Tape
24
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Feature. shock and pressure. -Tighter tolerance down to ±2% -Smaller size of 0402 (1005) -CATV Filter, Tuner. -Cable Modem/ XDSL Tuner.
Wire Wound Chip Inductor-WL Series Feature -Wire wound ceramic construction provide high SRF -Ultra-compact inductors provide exceptional Q values -Low profile, high current are available -Miniature SMD
SMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
FEATURE Operating Temperature: -40 C ~ +125 C Storage Temperature: 15~28 C; Humidity < 80%RH Ceramic base provide high SRF Ultra-compact inductors provide high Q factors Low profile, high current are available
SMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]](/thumbs/86/93358879.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Low Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
SPM R2 M P S A. Inductors-SPM. Ordering Code
Ordering Code Inductors-SPM SPM 2520 2R2 M P S A Product Code: SPM: Molding Inductor SPN : Coating Inductor(Normal) SPH :Coating Inductor(High ) Dimension (L X W): mm Code Dimension Code Dimension 1210
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]](/thumbs/86/93359020.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Table of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Melf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Coating Inductors (SPS/SPH/SPN Series)
Coating Inductors (SPS/SPH/SPN Series) Feature 1. Small and low profile inductor 2. It corresponds to high current 3. Simple and original magnetic shield structure Product Range Application For small DC/DC
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours