Upgrading the Construction Sector Workforce Training and Qualification in Greece

Transcript

1 Contract No: IEE/13/BWI/715/SI Upgrading the Construction Sector Workforce Training and Qualification in Greece Deliverable Title: List of members of the Qualifications/Skills observatory Signed memorandum (WP 6 D6.3) Issued by: National Technical University of Athens Created: August 30, 2017 Deliverable authors: Lefteris Siskos Haris Doukas

2 BUILD UP Skills UPSWING The action BUILD UP Skills UPSWING- being implemented under the Pillar II of the BUILD UP Skills initiative* - targets the development and pilot testing of three large scale fully functional training and qualification schemes for the Greek: i. insulation technicians, ii. aluminium and metal constructions craftsmen, iii. installers-maintainers of burners, in full accordance with the priorities and propositions of the National Qualification Roadmap (NQR), which was developed during the Pillar I of the BUILD UP Skills initiative. *The EU BUILD UP Skills Initiative BUILD UP Skills is a strategic initiative of the European Commission (under the Intelligent Energy Europe IEE - Programme) to boost continuing or further education and training of craftsmen and other on-site construction workers and systems installers in the building sector. The ultimate aim is to increase the number of qualified workers across Europe to deliver renovations offering a high energy performance, as well as new nearly zeroenergy buildings, with a view to contributing to the attainment of the European objectives. Initially (in the frame of Pillar I of the Initiative), National Qualification Roadmaps (NQRs) were developed in 30 European countries - in Greece too (by the BUS-GR project) which outline strategic measures and actions boosting the continuous vocational training and the improvement of skills of the building sector workforce in the fields of energy efficiency and renewable energy. Based on these roadmaps, Pillar II of the Initiative supports relevant actions for the development of new and/or the upgrade of existing training and qualification schemes. BUILD UP Skills UPSWING Partners Centre for Renewable Energy Sources and Saving (CRES) Project Coordinator National Technical University of Athens (NTUA) School of Electrical and Computer Engineering, Decision Support Systems Laboratory Technical University of Crete (TUC) School of Environmental Engineering, Renewable and Sustainable Energy Systems Laboratory Small Enterprises Institute of the Hellenic Confederation of Professionals, Craftsmen & Merchants (IME GSEVEE) Labour Institute of the Greek General Confederation of Labour (INE-GSEE) Technical Chamber of Greece (TCG) National Organization for the Certification of Qualifications & Vocational Guidance (EOPPEP) The sole responsibility for the content of this [webpage, publication etc.] lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein. Further Information: More details on BUILD UP Skills can be found at: More details on the IEE programme can be found at:

3 Table of Contents Preface to the Deliverable... 2 Annex I 1 st meeting of the Skills Observatory... 4 Annex II Signed Memorandum of Engagement... 8 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 1

4 Preface to the Deliverable The Deliverable D6.3 List of members of the Qualifications/Skills observatory Signed memorandum presents the efforts and the procedures followed by the BUS UPSWING consortium towards the formation of the qualifications/skills observatory. The following paragraphs describe briefly the steps that led to the formation of the observatory and present the list of members that eventually formed it by signing the memorandum. Nowadays, the operation of large-scale training schemes, especially when they are part of the same industry, requires efficient monitoring instruments to ensure the efficiency and sustainability of the schemes. Such central instruments consist of relevant and committed stakeholders, who contribute with their expertise, experience and collaborative work, to update and upgrade the training schemes, in order to catch up with the latest technological developments, institutional and regulatory reforms and potential obligations. Towards this direction the consortium of BUILD UP Skills UPSWING followed all the required steps and officially established a Qualifications/Skills Observatory (Skills Monitoring Council) for the systematic monitoring and recording of the needs for skills enhancement and/or acquisition of new in matters of the rational use of energy and energy efficiency in buildings. The Skills Observatory consists of: A (1) Steering Committee and Three (3) Specialty Committees set up per occupation / specialty of the construction industry, and in a similar manner to the National Technical Committees (NTCs) set up for the BUILD UP Skills UPSWING action. It should be noted that the observatory will initially deal with the issues of the three targeting professions of BUS UPSWING, but will then attempt to expand, through possible synergies with other European or national plans, to be implemented in the future, in order to include other construction industry specialties / occupations, involved in the energy upgrades of existing buildings and / or the construction of new nearly zero energy buildings. The Steering Committee will consist of one representative from CRES, NTUA, Technical University of Crete, TCG, INE GSEE, IME GSEVEE as the main contributors to the "Qualifications National Roadmap" and the implementation of BUILD UP Skills UPSWING, as well as by a representative of the National Institute of Labor and Human Resources (NILHR). The administrative and organizational coordination of the Committee has been undertaken by CRES. The Steering Committee will conduct 1 regular meeting per year, and the coordinator will be able to convene extraordinary meetings when needed. The main task of the Steering Committee is to D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 2

5 coordinate the Specialty Committees, to receive and process their findings, and to publish an annual report based on their findings. The 3 Specialty Committees consist of the following 7 members: (i) a member of GSEE, (ii) a member of GSEVEE, (iii) a member of TCG (representative with professional experience in the subject), (iv) a member of the GSEE federations, associated with each specialty. In the event of failure, this member will be substituted by a representative / specialist with good knowledge of the specialty, to be designated by GSEE, in consultation with the Steering Committee, (v) a member of the GSEVEE federation representing the specialty, if any, otherwise this member will be substituted by a representative / specialist with good knowledge of the specialty to be designated by GSEVEE, in consultation with the Steering Committee, (vi) a member representing the Greek Manpower Employment Organization (OAED), with relevant experience in the field of specialization, (vii) a member of the technical partners of the BUS UPSWING project (CRES, NTUA, Technical University of Crete), depending on the expertise in each specialty. The memorandum entered into force on Monday 28 August 2017, in the frame of the 1 st Skills Observatory meeting, which took place in the premises of TCG in Athens, the agenda and participants list of which are presented in the Annex I. The memorandum was signed by the Directors and Deans of the 7 bodies that constitute the Steering Committee. The signed memorandum, describing further the objectives and responsibilities of the Observatory with its 4 Committees, is presented in the Annex II of the Deliverable (In Greek). D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 3

6 Annex I 1 st meeting of the Skills Observatory ΙΚΤΥΟ ΠΑΡΑΚΟΛΟΥΘΗΣΗΣ ΤΩΝ ΑΝΑΓΚΩΝ ΑΝΑΒΑΘΜΙΣΗΣ ΤΩΝ ΥΦΙΣΤΑΜΕΝΩΝ ΚΑΙ ΑΠΟΚΤΗΣΗΣ ΝΕΩΝ ΓΝΩΣΕΩΝ / ΕΞΙΟΤΗΤΩΝ ΤΩΝ ΕΡΓΑΤΟΤΕΧΝΙΤΩΝ ΤΟΥ ΚΑΤΑΣΚΕΥΑΣΤΙΚΟΥ ΚΛΑ ΟΥ ΣΕ ΘΕΜΑΤΑ ΕΝΕΡΓΕΙΑΚΗΣ ΑΠΟ ΟΤΙΚΟΤΗΤΑΣ ΟΤΗΤΑΣ ΣΤΑ ΚΤΙΡΙΑ ΕΘΝΙΚΗ ΡΑΣΗ BUILD UP SKILLS USPWING 1Η ΣΥΝΑΝΤΗΣΗ ΤΟΥ «ΙΚΤΥΟΥ» Τεχνικό Επιμελητήριο Ελλάδος (ΤΕΕ)- Νίκης 4, Σύνταγμα, Αθήνα Αίθουσα Διοικούσας, Όροφος 8 ος Δευτέρα, 28 Αυγούστου 2017, 14:00 ΕΝΔΕΙΚΤΙΚΟ ΠΡΟΓΡΑΜΜΑ 14:00 14:15 ΠΡΟΣΕΛΕΥΣΗ - ΕΓΓΡΑΦΕΣ 14:15 14:30 Καλωσόρισμα - Σκοπός της Συνάντησης (ΚΑΠΕ) 14:30 15:00 Στόχος δημιουργίας του Δικτύου παρακολούθησης των γνώσεων / δεξιοτήτων των εργατοτεχνιτών του κατασκευαστικού κλάδου, σύσταση και αναμενόμενα αποτελέσματα αυτού (ΕΜΠ) 15:00 16:00 Διάλογος, ανταλλαγή απόψεων / τοποθετήσεις παρευρισκόμενων για τον τρόπο λειτουργίας και το πώς τα αποτελέσματα / παραγόμενα του Δικτύου θα συμβάλουν ουσιαστικά στην ανάληψη πρωτοβουλιών για το σχεδιασμό και την υλοποίηση προγραμμάτων επαγγελματικής εκπαίδευσης και κατάρτισης προκειμένου να υπάρξει ανταπόκριση του εργατικού δυναμικού στις νέες απαιτήσεις στους τομείς της εξοικονόμησης ενέργειας (ΕΞΕ) και της βελτίωσης της ενεργειακής αποδοτικότητας (ΕνΑπ) στα κτίρια. 16:00 16:30 Kλείσιμο της συνάντησης Προγραμματισμός μελλοντικών δράσεων D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 4

7

8

9 Annex II Signed Memorandum of Engagement D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 8

10 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 9

11 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 10

12 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 11

13 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 12

14 D6.3 List of members of the Qualifications/Skills observatory Signed memorandum Page 13

15

16 w w w. s k i l l s - u p s w i n g. e u Contact us: Dr. Charalampos Malamatenios Centre for Renewable Energy Sources and Saving (CRES) 19 th km Marathonos Avenue, 19009, Pikermi Attiki, Greece Tel.: Fax: Mail: malam@cres.gr The Project BUILD UP Skills UPSWING is supported from the Intelligent Energy Europe Programme of the European Commission. The sole responsibility for the content of this publication lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein.