HSMW-Cxxx White ChipLEDs Data Sheet HSMW-C191, HSMW-13, HSMW-265, HSMW-197, HSMW-12 Description These white ChipLEDs come in unique shades of white and provide product differentiation for backlighting application. They are designed in industry standard package for ease of handling and use. These chipleds come in either top emitting packages (HSMW-C191, 13, 265, & 197) or in a side emitting package (HSMW-C12). The packages all compatible with IR reflow soldering process and come in 8 mm tape on 7" diameter reel. They are compatible with automatic placement equipment. In order to facilitate pick and place operation, these chipleds are shipped in tape and reel with 4 units per reel for HSMW-C191, 13, 197, and 12 packages, and 3 units per reel for HSMW-C265 package. Features White color Small size Industry standard footprint Compatible with reflow soldering Compatible with automatic placement equipment Operating temperature range 3 C to +85 C Come in 8 mm tape on 7" diameter reels Applications LCD backlighting Keypad backlighting Pushbutton backlighting Symbol backlighting CAUTION: HSMW-Cxxx LEDs are Class 1A ESD sensitive per JESD22-A114C.1. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
Package Dimensions LED DIE CATHODE MARK LED DIE CATHODE MARK.8 (.31) 1.6 (.63 ).4 (.16) 3.4 (.134 ) 1.25 (.49).3 (.12) 1. (.39) POLARITY DIFFUSED EPOXY 1.2 (.47) POLARITY DIFFUSED EPOXY PC BOARD CATHODE LINE.3 ±.15 (.12 ±.6).6 (.23).3 (.12).3 ±.15 (.12 ±.6) 1.1 (.43) PC BOARD CATHODE LINE.5 ±.15 (.2 ±.6).3 (.12) 1.1 (.43).5 ±.15 (.2 ±.6).7 (.28) MIN. SOLDERING TERMINAL SOLDERING TERMINAL HSMW-C191 HSMW-C265 LED DIE LED DIE.3 (.12).6 (.24).8 (.31) 1.6 (.63 ).4 (.16) 1.6 (.63) POLARITY DIFFUSED EPOXY PC BOARD.16 (.6) POLARITY DIFFUSED EPOXY PC BOARD 1.2 (.47) 1. (.39).4 (.16).5 (.2) CATHODE LINE.3 ±.15 (.12 ±.6) CATHODE LINE 3.3 (.12).7 (.28) MIN. SOLDERING TERMINAL SOLDERING TERMINAL HSMW-C197 HSMW-C12 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. TOLERANCE ±.1 mm UNLESS OTHERWISE NOTED. 2
; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; Package Dimensions, continued LED Die Cathode Mark ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;.8.31 (.8) 1.6.63 Polarity DIFFUSED EPOXY 1.15.45.23.9.35.14 PCB BOARD.12.5 Cathode Line.3`.15.12`.6.3`.15.12`.6 ; ; ; ; ; ; ; ; ; ; Soldering Terminal.7 MIN..28 HSMW-C13 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. TOLERANCE ±.1 mm UNLESS OTHERWISE NOTED. 3
Device Selection Guide Package Dimension (mm) White Package Description 1.6 (L) x.8 (W) x.6 (H) HSMW-C191 Untinted, Diffused 1.6 (L) x.8 (W) x.35 (H) HSMW-C13 Untinted, Diffused 3.4 (L) x 1.25 (W) x 1.1 (H) [2] HSMW-C265 Untinted, Diffused 1.6 (L) x.8 (W) x.4 (H) HSMW-C197 Untinted, Diffused 1.6 (L) x.6 (W) x 1. (H) HSMW-C12 Untinted, Diffused Notes: 1. Right angle package. 2. Reverse mount package. Absolute Maximum Ratings at T A = 25 C Parameter HSMW-Cxxx Units DC Forward Current [1] 2 ma Power Dissipation 78 mw Reverse Voltage (I R = µa) 5 V LED Junction Temperature 95 C Operating Temperature Range 3 to +85 C Storage Temperature Range 4 to +85 C Soldering Temperature 11) Note: 1. Derate linearly as shown in Figure 4. See reflow soldering profile (Figures & Electrical Characteristics at T A = 25 C Reverse Forward Voltage Breakdown Capacitance C Thermal V F (Volts) V R (Volts) (pf), V F =, Resistance @ I F = 2 ma [1] @ I R = µa f = 1 MHz Rθ J-PIN ( C/W) Part Number Typ. Max. Min. Typ. Typ. HSMW-Cxxx 3.6 3.9 5 55 45 Note: 1. V F tolerance: ±.1 V. 4
Optical Characteristics at T A = 25 C Luminous Intensity Chromaticity Luminous I v (mcd) Coordinates [2] Viewing Angle Efficacy @ 2 ma [1, 4] Typ. 2 θ 1/2 Degrees [3] η v (lm/w) Part Number Min. Typ. x y Typ. Typ. HSMW-C13 45 15.29.27 145 24 HSMW-C191 71.5 2.29.27 14 24 HSMW-C265 71.5 18.29.27 15 24 HSMW-C12 45 16.29.27 155 24 HSMW-C197 45 16.29.27 13 24 Notes: 1. The luminous intensity, I v, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, λ d, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 4. Luminous intensity (I v ) tolerance: ± 15%. Light Intensity (Iv) Bin Limits [1] Intensity (mcd) Bin ID Min. Max. A.11.18 B.18.29 C.29.45 D.45.72 E.72 1. F 1. 1.8 G 1.8 2.8 H 2.8 4.5 J 4.5 7.2 K 7.2 11.2 L 11.2 18. M 18. 28.5 N 28.5 45. P 45. 71.5 Q 71.5 112.5 R 112.5 18. S 18. 285. T 285. 45. U 45. 715. V 715. 1125. W 1125. 18. X 18. 285. Y 285. 45. Tolerance: ± 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. 5
Y-COORDINATE SMT WHITE COLOR BIN STRUCTURES.4.38.36.34 D1.32.3 C1 D2.28.26 B1 C2.24.22.2.18.16.24 A1 A2.26 B2.28.3.32.34 X-COORDINATE I F FORWARD CURRENT ma 1 LUMINOUS INTENSITY (NORMALIZED AT 2 ma).1 2. 2.5 3. 3.5 4. 5 15 2 V F FORWARD VOLTAGE V I F FORWARD CURRENT ma 1.2 1..8.6.4.2 25 Figure 1. Color bin limits (CIE 1931 Chromaticity Diagram) [Tolerance: ±.2]. Figure 2. Forward current vs. forward voltage. Figure 3. Luminous intensity vs. forward current. I F MAX. MAXIMUM FORWARD CURRENT ma 25 2 15 5 2 3 4 5 6 7 8 9 T A AMBIENT TEMPERATURE C RELATIVE INTENSITY % 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE Figure 4. Maximum forward current vs. ambient temperature. Figure 5. Relative intensity vs. angle for HSMW-C191. RELATIVE INTENSITY % 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE Figure 6. Relative intensity vs. angle for HSMW-C13. 6
RELATIVE INTENSITY % 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE Figure 7. Relative intensity vs. angle for HSMW-C265. RELATIVE INTENSITY % 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE Figure 8. Relative intensity vs. angle for HSMW-C197. 7
RELATIVE INTENSITY 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE RELATIVE INTENSITY 9 8 7 6 5 4 3 2-9 -8-7 -6-5 -4-3 -2-2 3 4 5 6 7 8 9 ANGLE Figure 9. Relative intensity vs. angle for HSMW-C12. 8
- 3 SEC. TEMPERATURE 14-16 C SEC. MAX. 23 C MAX. 4 C/SEC. MAX. OVER 2 MIN. 4 C/SEC. MAX. 3 C/SEC. TEMPERATURE 217 C 2 C 15 C 255-26 C 3 C/SEC. MAX. 3 C/SEC. MAX. 6-12 SEC. 6 C/SEC. MAX. SEC. MAX. TIME TIME (Acc. to J-STD-2C) Figure. Recommended reflow soldering profile. Figure 11. Recommended Pb-free reflow soldering profile..8 (.31) 2.2 (.87) DIA. PCB HOLE.8 (.31).7 (.28).8 (.31) 1.4 (.55) 2.3 (.91) 1.4 (.55) 1.25 (.49) Figure 12. Recommended soldering pattern for HSMW-C191, HSMW-C13, and HSMW-C197. Figure 13. Recommended soldering pad pattern for HSMW-C265..4 (.16).4 (.16).7 (.28).15 (.6).8 (.31) 1.2 (.47).8 (.31) CENTERING BOARD Figure 14. Recommended soldering pad pattern for HSMW-C12. NOTE: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES). 9
USER FEED DIRECTION xxxxx xxxxx xxxxx xxxxx xxxxx CATHODE SIDE PRINTED LABEL Figure 15. Reeling orientation. 8. ± 1. (.315 ±.39) 3. ±.5 (.118 ±.2) ;.5 ± 1. (.413 ±.39) Ø 13.1 ±.5 (Ø.516 ±.2) Ø 2.2 MIN. (Ø.795 MIN.) 178.4 ± 1. (7.24 ±.39) 59.6 ± 1. (2.346 ±.39) 4. ±.5 (.157 ±.2) 6 PS 5. ±.5 (.197 ±.2) ; Figure 16. Reel dimensions. NOTE: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES).
DIM. A DIM. B 8. ; 2. ±.5 (.79 ±.2) 4. (.157) 4. (.157) ; HSMW-C12 POSITION IN CARRIER TAPE ; DIM. A 1.5 (.59) PART NUMBER CATHODE USER FEED DIRECTION ; ; 1.75 (.69) 3.5 ±.5 (.138 ±.2) DIM. C ±.3 (.315 ±.12) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A ±. (±.4) DIM. B ±. (±.4) COVER TAPE.2 ±.5 (.8 ±.2) CARRIER TAPE DIM. C ±. (±.4) HSMW-C191 SERIES 1.85 (.73).88 (.35).88 (.35) HSMW-C197 SERIES 1.75 (.69).95 (.37).6 (.24) HSMW-C12 SERIES 1.9 (.75) 1.15 (.45).8 (.31) HSMW-C13 SERIES 1.75 (.69).88 (.35).5 (.2) [.23 ±.5(.9 ±.2) for HSMW-C13] DIM. B HSMW-C12 R.5 ±.5 (.2 ±.2) DIM. A ; DIM. B 2. ±.5 (.79 ±.2) 4. (.157) 4. (.157) 1.5 (.59) PART NUMBER CATHODE USER FEED DIRECTION.2 ±.5 1.75 (.69) DIM. C 3.5 ±.5 (.138 ±.2) 8. ±.3 (.315 ±.12) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A ±. (.4) DIM. B ±. (.4) COVER TAPE DIM. C ±. (.4) HSMx-C265 SERIES 3.7 (.146) 1.45 (.57) 1.3 (.51) (.8 ±.2) CARRIER TAPE Figure 17. Tape dimensions. NOTE: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES). 11
END START Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 6, Surface Mounting SMT LED Indicator Components. THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS Figure 18. Tape leader and trailer dimensions. THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 23 mm (9.5 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Storage Condition: 5 to 3 C @ 6% RH max. Baking is required under the condition: 1. Humidity Indicator Card is > % when read at 23± 5 C. 2. Device expose to factory conditions < 3 C/6% RH more than 672 hours. Baking recommended condition: 6 ± 5 C for 2 hours. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 26 Avago Technologies Limited. All rights reserved. Obsoletes 5989-395EN AV1-685EN December, 26