For bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions.

Σχετικά έγγραφα
Production specification. Low profile package with built-in strain relief for surface mounted applications

Transient Voltage Suppressor

Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W

SMBJ SERIES. SMBG Plastic-Encapsulate Diodes. Transient Voltage Suppressor Diodes. Peak pulse current I PPM A with a 10/1000us waveform See Next Table

Symbol. Parameter Value Unit. IPP See Next Table A IFSM

1.5KE SERIES Taiwan Semiconductor

500mW Zener Diodes TZXJ2.0A TZXJ mW Zener Diodes. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)

0.5W SMD Zener Diodes TLZJ2.0A TLZJ W SMD Zener Diodes. Features. MiniMelf. Mechanical Data

Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition

Metal Oxide Varistors (MOV) Data Sheet

TV06B5V0-HF Thru. TV06B171-HF

DATA SHEET Surface mount NTC thermistors. BCcomponents

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

NTC Thermistor:SCK Series

TV04A5V0-HF Thru. TV04A441-HF

YJM-L Series Chip Varistor

MZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

China - Germany - Korea - Singapore - United States - smc-diodes.com

NTC Thermistor:TSM type

SMD Transient Voltage Suppressors

2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER

NTC Thermistor:SCK Series

Thin Film Chip Resistors

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of

GenX3 TM 300V IGBT IXGA42N30C3 IXGH42N30C3 IXGP42N30C3 V CES = 300V I C110. = 42A V CE(sat) 1.85V t fi typ. = 65ns

Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.

AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM

IXBH42N170 IXBT42N170

IXBK64N250 IXBX64N250

Metal Oxide Leaded Film Resistor

NPI Unshielded Power Inductors

Polymer PTC Resettable Fuse:KMC Series

Metal Oxide Leaded Film Resistor

NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.

5.0 to 220 Volts DEVICES FOR BIPOLAR APPLICATIONS

NTC Thermistor:TTC3 Series

Bulletin 1489 UL489 Circuit Breakers

High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System

PRELIMINARY DATA SHEET NPN EPITAXIAL SILICON TRANSISTOR FOR MICROWAVE HIGH-GAIN AMPLIFICATION

NTC Thermistor:SCK Series

SURFACE MOUNT NPN SILICON HIGH FREQUENCY TRANSISTOR

Multilayer Ceramic Chip Capacitors

HiPerFAST TM IGBT with Diode

Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

NTC thermistors for temperature measurement

3 V, 900 MHz LOW NOISE SI MMIC AMPLIFIER

NTC Thermistor:SCK Series

NPN Silicon RF Transistor BFQ 74

3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER

Multilayer Ceramic Chip Capacitors

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

3 V, 900 MHz Si MMIC AMPLIFIER

MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]

Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series

Polymer PTC Resettable Fuse: KMC Series

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

Carbon Film Leaded Resistor

Multilayer Chip Inductor

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A

B37631 K K 0 60

MAX1886. TOP PART TEMP. RANGE PIN- PACKAGE M ARK MAX1886EZK -40 C to +85 C 5 Thin SOT23-5* ADQL

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)

THICK FILM LEAD FREE CHIP RESISTORS

CSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK

MZ0.5GN SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

MAX4147ESD PART 14 SO TOP VIEW. Maxim Integrated Products 1 MAX4147 EVALUATION KIT AVAILABLE ; Rev 1; 11/96 V CC V EE OUT+ IN+ R t SENSE IN-

Current Sensing Chip Resistor

C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS

Metal Film Leaded Precision Resistor

Current Sense Metal Strip Resistors (CSMS Series)

Polymer PTC Resettable Fuse: KRG Series

NPN SILICON OSCILLATOR AND MIXER TRANSISTOR

Ceramic PTC Thermistor Overload Protection

YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.

Supplementary Materials for

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013

+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C

Power Inductor LVS Series

WiFi 2.4 GHz Typical performance (Test board size 80 x 37 mm, PWB top surface ground removal area x 6.25 mm, position 1 on PWB)

FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)

MAX823/MAX824/MAX825 V CC PART TEMP. RANGE PIN-PACKAGE MAX824_EUK. -40 C to +85 C

Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top

ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA

SMBJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

NPIS Shielded Power Inductors

Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C

VGS=-8V. RG=15ohm. Item Symbol Condition Limit Unit. VDS=50V, IDS1=0.9mA VDS=50V, IDS2=7.2mA

Thin Film Chip Resistors

Surface Mount Aluminum Electrolytic Capacitors

Transcript:

Transient Suppressor Features Optimized for LAN protection applications Low profile package with built-in strain relief for surface mounted applications Low incremental surge resistance, excellent clamping capability 400W peak pulse power capability with a 10/1000 Ìs wave form, repetition rate (duty cycle): 0.01% (300W above 78V) Very fast response time High temperature soldering guaranteed: 250 C / 10 seconds at terminals Mechanical Data Case: SMA molded plastic Molding compound, UL flammability classification rating 94V-0 Terminals: Solder plated, solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode end s for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions. Maximum Ratings (@T A = 25 C unless otherwise specified) Parameter Symbol Value Units Peak power dissipation with a 10/1000μs waveform (NOTE 1,2, FIG.1) P PPM Minimum 400 W Peak pulse current with a 10/1000μs waveform (NOTE1) I PPM See next table A Typical thermal resistance, junction to ambient (NOTE 3) R θ JA 120 /W Peak forward surge current, 8.3ms single half sine-wave uni-directional only (NOTE 2) I FSM 40.0 A Typical thermal resistance, junction to ambient (NOTE 3) R θ J L 30 /W Operating junction and storage temperature range T J, T STG -55---+150 NOTES: 1.Non-repetitive current pules, per Fig. 3 and derate above TA=25 per Fig. 2. Rating is 300W above 78V. 2. Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal. 3. Mounted on minimum recommended pad layout.

Transient Suppressor Electrical Characteristics (@T A = 25 C unless otherwise specified) Peak SMAJ5.0 AAD AWD 6.4 7.81 10 5.0 800 41.7 9.6 SMAJ5.0A AAE AWE 6.4 7.08 10 5.0 800 43.5 9.2 SMAJ6.0 AAF AWF 6.67 8.15 10 6.0 800 35.1 11.4 SMAJ6.0A AAG AWG 6.67 7.37 10 6.0 800 38.8 10.3 SMAJ6.5 AAH AWH 7.22 8.82 10 6.5 500 32.5 12.3 SMAJ6.5A AAK AWK 7.22 7.98 10 6.5 500 35.7 11.2 SMAJ6.8 AED AFD 7.56 9.24 10 6.8 200 33.1 12.1 SMAJ6.8A AEE AFE 7.56 8.35 10 6.8 200 36.4 11.0 SMAJ7.0 AAL AWL 7.78 9.51 10 7.0 200 30.1 13.3 SMAJ7.0A AAM AWM 7.78 8.6 10 7.0 200 33.3 12 SMAJ7.5 AAN AWN 8.33 10.3 1.0 7.5 100 28.0 14.3 SMAJ7.5A AAP AWP 8.33 9.21 1.0 7.5 100 31.0 12.9 SMAJ8.0 AAQ AWQ 8.89 10.9 1.0 8.0 50 26.7 15.0 SMAJ8.0A AAR AWR 8.89 9.83 1.0 8.0 50 29.4 13.6 SMAJ8.5 AAS AWS 9.44 11.5 1.0 8.5 10 25.2 15.9 SMAJ8.5A AAT AWT 9.44 10.4 1.0 8.5 10 27.8 14.4 SMAJ9.0 AAU AWU 10.0 12.2 1.0 9.0 5.0 23.7 16.9 SMAJ9.0A AAV AWV 10.0 11.1 1.0 9.0 5.0 26.0 15.4 SMAJ10 AAW AWW 11.1 13.6 1.0 10 5.0 21.3 18.8 SMAJ10A AAX AWX 11.1 12.3 1.0 10 5.0 23.5 17.0 SMAJ11 AAY AWY 12.2 14.9 1.0 11 5.0 19.9 20.1 SMAJ11A AAZ AWZ 12.2 13.5 1.0 11 5.0 22.0 18.2 SMAJ12 ABD AXD 13.3 16.3 1.0 12 5.0 18.2 22.0 SMAJ12A ABE AXE 13.3 14.7 1.0 12 5.0 20.1 19.9 SMAJ13 ABF AXF 14.4 17.6 1.0 13 5.0 16.8 23.8 SMAJ13A ABG AXG 14.4 15.9 1.0 13 5.0 18.6 21.5 SMAJ14 ABH AXH 15.6 19.1 1.0 14 5.0 15.5 25.8 SMAJ14A ABK AXK 15.6 17.2 1.0 14 5.0 17.2 23.2 SMAJ15 ABL AXL 16.7 20.4 1.0 15 5.0 14.9 26.9 SMAJ15A ABM AXM 16.7 18.5 1.0 15 5.0 16.4 24.4

Transient Suppressor Peak SMAJ16 ABN AXN 17.8 21.8 1.0 16 5.0 13.9 28.8 SMAJ16A ABP AXP 17.8 19.7 1.0 16 5.0 15.4 26 SMAJ17 ABQ AXQ 18.9 23.1 1.0 17 5.0 13.1 30.5 SMAJ17A ABR AXR 18.9 20.9 1.0 17 5.0 14.5 27.6 SMAJ18 ABS AXS 20.0 24.4 1.0 18 5.0 12.4 32.2 SMAJ18A ABT AXT 20.0 22.4 1.0 18 5.0 13.7 29.2 SMAJ20 ABU AXU 22.2 27.1 1.0 20 5.0 11.2 35.8 SMAJ20A ABV AXV 22.2 24.5 1.0 20 5.0 12.3 32.4 SMAJ22 ABW AXW 24.4 29.8 1.0 22 5.0 10.2 39.4 SMAJ22A ABX AXX 24.4 26.9 1.0 22 5.0 11.3 35.5 SMAJ24 ABY AXY 26.7 32.6 1.0 24 5.0 9.3 43.0 SMAJ24A ABZ AXZ 26.7 29.5 1.0 24 5.0 10.3 38.9 SMAJ26 ACD AYD 28.9 35.3 1.0 26 5.0 8.6 46.6 SMAJ26A ACE AYE 28.9 31.9 1.0 26 5.0 9.5 42.1 SMAJ28 ACF AYF 31.3 38 1.0 28 5.0 8.0 50.0 SMAJ28A ACG AYG 31.3 34.4 1.0 28 5.0 8.8 45.4 SMAJ30 ACH AYH 33.3 40.7 1.0 30 5.0 7.5 53.5 SMAJ30A ACK AYK 33.3 36.8 1.0 30 5.0 8.3 48.4 SMAJ33 ACL AYL 36.7 44.9 1.0 33 5.0 6.8 59.0 SMAJ33A ACM AYM 36.7 40.6 1.0 33 5.0 7.5 53.3 SMAJ36 ACN AYN 40.0 48.9 1.0 36 5.0 6.2 64.3 SMAJ36A ACP AYP 40.0 44.2 1.0 36 5.0 6.9 58.1 SMAJ40 ACQ AYQ 44.4 54.3 1.0 40 5.0 5.6 71.4 SMAJ40A ACR AYR 44.4 49.1 1.0 40 5.0 6.2 64.5 SMAJ43 ACS AYS 47.8 58.4 1.0 43 5.0 5.2 76.7 SMAJ43A ACT AYT 47.8 52.8 1.0 43 5.0 5.8 69.4 SMAJ45 ACU AYU 50.0 61.1 1.0 45 5.0 5.0 80.3 SMAJ45A ACV AYV 50.0 55.3 1.0 45 5.0 5.5 72.7 SMAJ48 ACW AYW 53.3 65.1 1.0 48 5.0 4.7 85.5 SMAJ48A ACX AYX 53.3 58.9 1.0 48 5.0 5.2 77.4 SMAJ50 AEF AFF 55.5 67.8 1.0 50 5.0 4.5 89.5 SMAJ50A AEG AFG 55.5 61.3 1.0 50 5.0 4.9 81

Transient Suppressor Peak SMAJ51 ACY AYY 56.7 69.3 1.0 51 5.0 4.4 91.1 SMAJ51A ACZ AYZ 56.7 62.7 1.0 51 5.0 4.9 82.4 SMAJ54 ARD AZD 60.0 73.3 1.0 54 5.0 4.2 96.3 SMAJ54A ARE AZE 60.0 66.3 1.0 54 5.0 4.6 87.1 SMAJ56 ATY AUY 62.2 76 1 56 5 4.0 99.9 SMAJ56A ATZ AUZ 62.2 68.8 1 56 5 4.4 90.3 SMAJ58 ARF AZF 64.4 78.7 1.0 58 5.0 3.9 103 SMAJ58A ARG AZG 64.4 71.2 1.0 58 5.0 4.3 93.6 SMAJ60 ARH AZH 66.7 81.5 1.0 60 5.0 3.7 107 SMAJ60A ARK AZK 66.7 73.7 1.0 60 5.0 4.1 96.8 SMAJ63 ARL AZL 69.9 85.4 1.0 63 5.0 3.5 112.8 SMAJ63A ARM AZM 69.9 77.2 1.0 63 5.0 3.9 102.1 SMAJ64 ARN AZN 71.1 86.9 1.0 64 5.0 3.5 114 SMAJ64A ARP AZP 71.1 78.6 1.0 64 5.0 3.9 103 SMAJ70 AEH AFH 77.8 95.1 1.0 70 5.0 3.2 125 SMAJ70A AEK AFK 77.8 86.0 1.0 70 5.0 3.5 113 SMAJ75 ARQ AZQ 83.3 102 1.0 75 5.0 3.0 134 SMAJ75A ARR AZR 83.3 92.1 1.0 75 5.0 3.3 121 SMAJ78 ARS AZS 86.7 106 1.0 78 5.0 2.9 139 SMAJ78A ART AZT 86.7 95.8 1.0 78 5.0 3.2 126 SMAJ85 ARU AZU 94.4 115 1.0 85 5.0 2.6 151 SMAJ85A ARV AZV 94.4 104 1.0 85 5.0 2.9 137 SMAJ90A ARX AZX 100 111 1.0 90 5.0 2.7 146 SMAJ100 ARY AZY 111 136 1.0 100 5.0 2.2 179 SMAJ100A ARZ AZZ 111 123 1.0 100 5.0 2.5 162 SMAJ110 ASD AVD 122 149 1.0 110 5.0 2.0 196 SMAJ110A ASE AVE 122 135 1.0 110 5.0 2.3 177 SMAJ120 ASF AVF 133 163 1.0 120 5.0 1.9 214 SMAJ120A ASG AVG 133 147 1.0 120 5.0 2.1 193 SMAJ130 ASH AVH 144 176 1.0 130 5.0 1.7 231 SMAJ130A ASK AVK 144 159 1.0 130 5.0 1.9 209

Transient Suppressor Peak SMAJ150 ASL AVL 167 204 1.0 150 5.0 1.5 268 SMAJ150A ASM AVM 167 185 1.0 150 5.0 1.6 243 SMAJ160 ASN AVN 178 218 1.0 160 5.0 1.4 287 SMAJ160A ASP AVP 178 197 1.0 160 5.0 1.5 259 SMAJ170 ASQ AVQ 189 231 1.0 170 5.0 1.3 304 SMAJ170A ASR AVR 189 209 1.0 170 5.0 1.5 275 SMAJ175 AEL AFL 194.6 237.8 1.0 175 5.0 1.3 309.8 SMAJ175A AEM AFM 194.6 215.2 1.0 175 5.0 1.4 280.3 SMAJ180 ATW AUW 200 245 1.0 180 5.0 1.2 321 SMAJ180A ATX AUX 200 221 1.0 180 5.0 1.4 291 SMAJ188 AST AVT 209 255 1.0 188 5.0 1.2 344 SMAJ188A ASS AVS 209 231 1.0 188 5.0 1.2 328 SMAJ200 ASU AVU 222 272 1.0 200 5.0 1.1 356 SMAJ200A ASV AVV 222 246 1.0 200 5.0 1.2 323 SMAJ220 ASW AVW 245 299 1.0 220 5.0 1.0 392 SMAJ220A ASX AVX 245 270 1.0 220 5.0 1.1 355 SMAJ240 ASY AVY 267 326 1.0 240 5.0 0.9 428 SMAJ240A ASZ AVZ 267 295 1.0 240 5.0 1.0 388 SMAJ250 ATS AUS 278 340 1.0 250 5.0 0.9 446 SMAJ250A ATT AUT 278 307 1.0 250 5.0 1.0 404 SMAJ300 ATF AUF 333 408 1.0 300 5.0 0.7 535 SMAJ300A ATG AUG 333 368 1.0 300 5.0 0.8 485 SMAJ350 ATQ AUQ 389 476 1.0 350 5.0 0.6 624 SMAJ350A ATR AUR 389 430 1.0 350 5.0 0.7 565 SMAJ360 ATH AUH 400 489 1.0 360 5.0 0.6 642 SMAJ360A ATK AUK 400 442 1.0 360 5.0 0.7 582 SMAJ400 ATL AUL 445 544 1.0 400 5.0 0.6 713 SMAJ400A ATM AUM 445 491 1.0 400 5.0 0.6 646 SMAJ440 ATN AUN 489 598 1.0 440 5.0 0.5 784 SMAJ440A ATP AUP 489 540 1.0 440 5.0 0.6 711

Transient Suppressor Ratings and Characteristic Curves (T A =25 C unless otherwise noted)

Transient Suppressor Package Outline Dimensions(unit:mm) Mounting Pad Layout(unit:mm) Ordering Information Part No. Package Shipping SMAJ5.0-SMAJ440CA SMA 5000 /Tape&Reel