Whirlpool Europe Customer Services. Service Information TOP LAVE-LINGE AWE Last Modification: 09/16/08

Transcript

1 AWE 7777 Service Information TOP LAVE-LINGE AWE Last Modification: 09/16/08 LISTE DE PIECES 2 VUE ECLATEE 5 DONNEES TECHNIQUES 7 SCHEMA DE CABLAGE 10 SCHEMA DE CIRCUITS 12 CHARTE PROGRAMME 14 PENDANT LE PROGRAMME TEST 22 CODE ERREUR 23 SERVICE BULLETIN 27 This document is only intended for qualified technicans who are aware of the respective safety regulations. Subject to modifications

2 page 2 of 29 LISTE DE PIECES Pos No 12NC Description PORTILLON DE P.V. GW CHARNIERE PORTILLON P.V.GW FOND DE CHASSIS ENJOLIOVEUR INT ENT.CUVE GW BATI PIED AVANT REGLABLE KIT MOBILITE CPL PIED PANNEAU DE FACADE GW PANNEAU D. GW PANNEAU G. GW PARTIE ARRIERE AXE CHARNIERE COUVERCLE GW CONTREPOIDS OMEGA COTE G CONTREPOIDS COTE D AMORTISSEUR BLOCAGE AMORTISSEUR GOUPILLE AXE AMORTISSEUR CHEVILLE PLASTIQUE AMORTI COUVERCLE DE PORTE GW CONTRE-PORTE COUVERL.GW COUVERCLE CPL. DE PORTE GW POIGNEE CPL. GW CROCHET DE PORTE MANCHETTE DE CUVE 5 cm COLLIER FIX. MANCHETTE JOINT ETANCH. MANCHETTE/CUVE CUVE COUVERCLE TAMBOUR 210 mm ENS. FERMETURE TAMBOUR AUBE DE TAMBOUR SIMPLE AUBE DE TAMBOUR COURROIE POULIE JOINT DE FLASQUE BANDEAU AWE HUBLOT DOMINO WH BOUTON PROGRAM. EBL WP RESSORT TOUCHE 4 Opt TOUCHE 3 Opt TOUCHE MOTEUR ALD1 1200TRS FILTRE ANTIPARASITES 1,00 µf SUPPORT FILTRE POMPE DE VIDANGE ELEM. CHAUFFANT 2050W, 230V

3 page 3 of 29 Pos No 12NC Description CORDON SECTEUR 2 m BORNIER D ALIMENTATION PLATINE PUISS. DOMINO, BASIC, C PLATINE PUISS. DOMINO ELECTROVANNE DOUBLE COUVERCLE PRESSOSTAT 50/25 INVENS MODULE E MODULE E BLOCAGE TAMBOUR SECURITE DE PORTE (3 COSSES) GUIDE LUMIERE GUIDE LUMIERE GUIDE LUMIERE SONDE CTN SC TUYAU D ARRIVEE EN Reflex TUYAU INJECTEUR RILSAN MAINTIEN INJECTEUR SIPHON ADOUCISSANT CLIP FIX.BOITE A PRODUITS BAC DETERGENT CHAMBRE DE COMPRESSION DURIT CUVE/POMPE ECO FLOTTEUR FILTRE pump Askoll TUYAU VIDANGE TUYAU DE PRESSOSTAT TUYAU COUVERCLE JOINT CHAMBRE COMPRESSION FIXATION TUYAU SUPPORT TUYAU GRAND COLLIER DURIT C/P CALE DE TRANSPORT AGRAPHE FIXATION TUYAU VIS PARKER INOX 3,5x14SS VIS PV./CC. 4x VIS AXE TAMBOUR/POULIE VIS PT 7x15 DE PALIER VIS M8x ECROU DE POULIE M RONDELLE VIS ROULEM./POULIE RESSORT TORSION PORTE RESSORT BLOC LAVEUR ROULEMENT Z C PALIER JOINT V RING COUPELLE JOINT V RING JOINT TORIQUE COUPELLE

4 page 4 of 29 Pos No 12NC Description COUVERCLE CAPUCHON CROSSE TUYAU VIDANGE AGRAPHE THERMOPLONGEUR

5 page 5 of 29 VUE ECLATEE

6 page 6 of 29 VUE ECLATEE

7 page 7 of 29 DONNEES TECHNIQUES DIMENSIONS + POIDS DIMENSIONS APPAREIL HAUTEUR cm LARGEUR cm PROFONDEUR cm POIDS NET kg ALIMENTATION TENSION V ± 10% FREQUENCE Hz FUSIBLE A PUISS. CONSOMMEE ~2.3 kw TAMBOUR VOLUMES l ROTATION LAVAGE tr/min ESSORAGE MAX tr/min SONDE DE TAMBOUR TENSION NOMINALE V (DC) PRESSOSTAT NIVEAU /14 DEBORDEMENT RELAIS MICRO EN PORTE TYPE INTERUPTOR Commutez avec le réchauffeur de PTC du bimétal TENSION NOMINALE (90-264) V TEMPS DE FERMETURE s TEMPS DÓUVERTURE s ELECTROVANNE D ENTREE TENSION NOMINALE V / 50 Hz DEBIT (1.5-5 bar) l/min PRESSION SUPPORTEE bar RESISTANCE (20 C) kω

8 page 8 of 29 POMPE DE VIDANGE TENSION NOMINALE V / 50 Hz PUISSANCE DE RACCORDEMENT W RESISTANCE DU ENROULEMENT Ω CAPACITE ( m) ± 2 l/min POSITION DU TUYAU m ELEMENT CHAUFFANT TENSION NOMINALE V + 10 %, -15 % PUISSANCE DE RACCORDEMENT W RESISTANCE (20 C) Ω COURANT DE FUITE < 0.8 ma CTN RESISTANCE CTN 0 C 35.9 kω 30 C 9.8 kω 40 C 6.6 kω 50 C 4.6 kω 60 C 3.2 kω 70 C 2.3 kω 95 C 1.1 kω MOTEUR ENROULEMENTS (CONNECTEUR MOTEUR) (20 C) STATOR Ω ROTOR Ω TACHYMETRE Ω PLATINE SELECTION TYPE DOMINO TENSION NOMINALE V / 50 Hz POINTS DE CONTROLES

9 page 9 of 29 Moteur M7.6 - DSS3.2 >40 V Anti-débordement AQ2.2 - DSS V - à la pompe AQ2.1 - DSS V CTN non mesurable Pompe DP2.1 - DP V Sécurité de porte DSS3.1 - DSS V Pressostat E4 - E2 230 V - vide PR2.1 - E2 230 V - plein PR2.2 - E2 230 V Electrovanne (Rast 2.5) V2.1 - V2.2 >170 V Options non mesurables

10 page 10 of 29 SCHEMA DE CABLAGE

11 page 11 of 29 LEGENDE

12 page 12 of 29 SCHEMA DE CIRCUITS

13 page 13 of 29 LEGENDE

14 page 14 of 29 CHARTE PROGRAMME

15 page 15 of 29 CHARTE PROGRAMME

16 page 16 of 29 CHARTE PROGRAMME

17 page 17 of 29 CHARTE PROGRAMME

18 page 18 of 29 CHARTE PROGRAMME

19 page 19 of 29 CHARTE PROGRAMME

20 page 20 of 29 CHARTE PROGRAMME

21 page 21 of 29 CHARTE PROGRAMME

22 page 22 of 29 PENDANT LE PROGRAMME TEST

23 page 23 of 29 CODE ERREUR

24 page 24 of 29 CODE ERREUR

25 page 25 of 29 CODE ERREUR

26 page 26 of 29 CODE ERREUR

27 page 27 of 29 SERVICE BULLETIN AUTHOR: Juergen Reinhardt LAST_UPDATE: 08/13/08 VERSION: 1.0 TITLE: F06 randomly displayed in Domino controls CAUSE: Sensible failure detection in drive system for safety reasons REMEDIAL ACTION: Please check the following points: Load: Was there bulky load in the drum or was the machine overloaded? Drive system: Please check the tacho generator (resistance and cable). Please guarantee a proper and tight seat of the belt on drive shaft and pulley. Please check the electrical connections between controls and motor.

28 page 28 of 29 SERVICE BULLETIN AUTHOR: Ronny Schurricht LAST_UPDATE: 04/29/08 VERSION: 1.0 TITLE: Start Delay Indication ISSUE: Some customers are claiming that the Start Delay function is not working well. The machine seems to start one hour earlier than expected. For example, at Start Delay time 3hours the indication is switching from h:03 to h:02 after 1 minute. REMEDIAL ACTION: The Start Delay function is working correct. Reason for this behaviour is following: If the start time is after 3h 00min it s indicating h:03 If the start time is after 2h 59min it s indicating h:02 If the start time is after 2h 00min it s indicating h:02 If the start time is after 1h 59min it s indicating h:01 If the start time is after 0h 59min it s indicating :59 If the start time is after 0h 30min it s indicating :30

29 page 29 of 29 SERVICE BULLETIN AUTHOR: Ronny Schurricht LAST_UPDATE: 06/03/08 VERSION: 1.0 TITLE: Drum up function not working. ISSUE: We have some claims related to toploaders with drum up function not working. That means, at the end of cycle the drum stops with drum door in wrong position. Reason is a software bug in the control unit. In production the problem is solved since week 12 / 2008, means serial number of machines from xxxxxx onwards. REMEDIAL ACTION: In case of such a claim, the control board needs to be reprogrammed by SAM module with the database DB-2062.