Top-Lok The Top-Lok clamping system locks the inserts against both the back and side of the pocket, providing clamping integrity axially and radially.
|
|
|
- Άρχιππος Ασπάσιος
- 7 χρόνια πριν
- Προβολές:
Transcript
1 PARTING AND GROOVING Top-Lok The Top-Lok clamping ytem lock the inert againt both the back and ide of the pocket, providing clamping integrity axially and radially. Preciion ground inert Interchangeable with imilar clamping ytem inert provide maximum edge ecurity Grade for all material P M K N S H The Top-Lok ytem ha different carbide grade to cover all type of workpiece material from the very wear reitant grade GC to the tough grade GC SANDVIK ( ) 23
2 PARTING AND GROOVING Top-Lok inert l a 3 GC = Coated carbide = Uncoated cemented carbide Ordering code Dimenion, inch P M K N S GC GC GC GC GC GC GC GC TLG Neutral preciion grooving l a TLG 2031R TLG 2031L TLG 2041R TLG 2041L TLG 2047R TLG 2047L TLG 2058R TLG 2058L TLG 2062R TLG 2062L TLG 2094R TLG 2094L TLG 2125R TLG 2125L TLG 3047R TLG 3047L TLG 3062R TLG 3062L TLG 3072R TLG 3072L TLG 3078R TLG 3078L TLG 3088R TLG 3088L TLG 3094R TLG 3094L TLG 3097R TLG 3097L TLG 3105R TLG 3105L TLG 3110R TLG 3110L TLG 3122R TLG 3122L TLG 3125R TLG 3125L TLG 3142R TLG 3142L TLG 3156R TLG 3156L TLG 3178R TLG 3178L TLG 3185R TLG 3185L TLG 3189R TLG 3189L ) Grade available in right hand inert only. not available. Other l a dimenion and corner radii are eaily available by requet. 1) 1) 1) 1) Ordering example: 10 piece TLG 2031R TLG 2031L = Firt choice SANDVIK ( )
3 Top-Lok inert PARTING AND GROOVING l a 3 10 GC = Coated carbide/cermet = Uncoated cemented carbide GC GC GC GC GC GC GC GC TLGP Poitive preciion grooving l a TLGP 2031R TLGP 2031L TLGP 2041R TLGP 2041L TLGP 2047R TLGP 2047L TLGP 2058R TLGP 2058L TLGP 2062R TLGP 2062L TLGP 2094R TLGP 2094L TLGP 2125R TLGP 2125L TLGP 3047R TLGP 3047L TLGP 3062R TLGP 3062L TLGP 3072R TLGP 3072L TLGP 3078R TLGP 3078L TLGP 3088R TLGP 3088L TLGP 3094R TLGP 3094L TLGP 3097R TLGP 3097L TLGP 3105R TLGP 3105L TLGP 3110R TLGP 3110L TLGP 3122R TLGP 3122L TLGP 3125R TLGP 3125L TLGP 3142R TLGP 3142L TLGP 3156R TLGP 3156L TLGP 3178R TLGP 3178L TLGP 3185R TLGP 3185L TLGP 3189R TLGP 3189L ) Grade available in right hand inert only. not available. 2) Grade available in left hand inert only. not available. Other l a dimenion and corner radii are eaily available by requet. 1) 1) 1) 1) 2) 2) 1) 1) 1) 1) Ordering example: 10 piece TLGP 2031R TLGP 2031L = Firt choice SANDVIK ( ) SANDVIK ( ) 25
4 PARTING AND GROOVING Top-Lok inert Undercutting inert l a GC = Coated carbide GC GC GC GC l a TLU 3094R TLU 3094L TLU 3125R TLU 3125L TLU 3156R TLU 3156L TLU 45 undercutting Neutral preciion. Other l a dimenion and corner radii are eaily available by requet. Ordering example: 10 piece TLU 3094R TLU 3094L f GC = Coated carbide/cermet GC GC GC GC f TLV 3RJ TLV 3LJ TLV Poly-Vee Neutral double ended Other l a dimenion and corner radii are eaily available by requet. Ordering example: 10 piece TLV 3RJ TLV 3LJ SANDVIK ( )
5 Top-Lok inert PARTING AND GROOVING TLR TLRP GC = Coated carbide = Uncoated cemented carbide GC GC GC GC GC GC GC GC TLR Full radiu Neutral preciion TLR 3031R TLR 3031L TLR 3047R TLR 3047L TLR 3062R TLR 3062L TLR 3078R TLR 3078L TLR 3094R TLR 3094L TLRP Full radiu 5 poitive preciion TLRP 3031R TLRP 3031L TLRP 3047R TLRP 3047L TLRP 3062R TLRP 3062L TLRP 3078R TLRP 3078L TLRP 3094R TLRP 3094L ) Grade available in right hand inert only. not available. Other l a dimenion and corner radii are eaily available by requet. Ordering example: 10 piece TLR 3031R TLR 3031L = Firt choice SANDVIK ( ) 27
6 SWISS TOOLS Shank tool Top-Lok crew clamp deign External machining Holder for threading and grooving Inert: TL TLSR/L-S Note: tool ue right hand inert. tool ue left hand inert tyle hown Ordering code Dimenion, inch/mm TLSR/L-S Inch b f 1 2) h h 1 l 1 l 3 Gauge inert TLSR/L 62D-S TLG D-S TLSR 102D-S TLSR/L 83D-S TLG D-S D-S Metric TLSR/L 0808M2-S TLG M2-S M2-S TLSR/L 1616M3-S TLG ) f 1 dimenion qualified over harp point of inert. Ordering example: 2 piece TLSR-62D-S 2 piece TLSL-62D-S Spare part Inert ize Clamp for right Clamp for left Clamping hand holder hand holder crew Key (ize) TLG 2 C2R C2L (6-32) ( 7 64) TLG 3 C3R C3L (10-32) ( 5 32) Inert SANDVIK ( )
TAC Inserts, Negative
A Inert, hombic, with hole MG 5 0 0 - A Inert Preciion finihing Finihing F 0 (G) F º º º º 0 0. 0. 0. 0 0. 0. 0. 0..0 0 0. 0. 0. 0 0. 0. 0. 0..0 0 0. 0. 0. 0..0 0 0. 0. 0. 0..0 Inert at. No. utting edge
FORM TOOLS APPLICATION FORM CUTTERS HSS-E & HSS SUPERIOR PERFORMANCE IDEAL FOR MATERIAL GROUPS
UERIOR ERFORMACE FORM TOO H-E & H AICATIO FORM CUTTER tandard weldon latted shank or B screwed shank, depending on tool type. H-E and H milling cutters for varying forms on a variety of materials remium
TAC Inserts, Negative
A Inert, hombic, with hole NMG 0 0 - A Inert 0 N F º 0 0. 0. 0. 0 0. 0. 0. 0..0 utting edge length () hickne () orner radiu (rε) N 090 90 509 (mm). 5..5 7.9 9. 95 95 95 95 9005 905 905 905 00 00 55 55
MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
IABPF/ABPF. Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULAR STYLE FEATURES
Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULA STYLE FEATUES ATH Coated Inserts are ideal for high-speed and high-efficiency machining of hardened steels ACS Coated Inserts are
Packaging Chip Resistors
Packaging Chip esistors Chip esistor eel Nominal Dimensions Inches () Packaging: Chips Per EI Standard S-481 inches B C D E F G H J 1 0.16 ± 0.01 4.0 ± 0.1 0.08 ± 0.01 2.0 ± 0.1 0.16 ± 0.01 4.0 ± 0.1 0.06
MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Supercut Spade Drill System
rill wide range of sizes with just one drill PMS 298 (Light lue) PMS (Text Metal Effect) 7 1 NEW EXTENE RANGE OR 214 TECH NEWS 7 PMS (Text Metal Effect) 1 Spade rill Holders Technical Guide Spade rill
CANYON system 196
196 CANYON 100 ytem impact reitant 197 cutout (c) total OPA MICROPRISMATIC OUVER ED: total = +++... total - 2000mm - 00mm - 00mm - 00mm T5 HE lamp 14W/21W/28W/35W cutout = total + 5mm total + 7mm total
Groove Milling High Precision Tools for Groove Milling
Groove Milling High Precision Tools for Groove Milling METRIC Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove Milling tools, for miniature and small
CANYON frame system
208 CANYON frame 120 ytem impact reitant 209 cutout (c) total OPA MICROPRISMATIC OUVER ED: total = +++... total - 2000mm - 00mm - 00mm - 00mm T5 HE lamp 14W/21W/28W/35W cutout = total + 5mm total + 7mm
Groove Milling. High Precision Tools for Groove Milling INCH. Innovative Grooving & Turning Solutions
Groove Milling High Precision Tools for Groove Milling INCH Innovative Grooving & Turning Solutions Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove
Solid carbide drill For removal of broken taps or drilling difficult materials
General Turning DRILLING Hard cut drills Solid carbide drill For removal of broken taps or drilling difficult materials 5 D c Field of application: For removal of broken taps Drill diameter Dimensions,
SPARE PARTS LIST. for. Infrared oil heater. Model. Daystar. Type. PH5 for 120V 60Hz. May, 2017
SPARE PARTS LIST for Infrared oil heater Model Daystar Type PH5 for 120V 60Hz May, 2017 *PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE..* 2017 J.S.O'will, Inc.. Shizuoka Seiki Co. Ltd.
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
ΓΥΑΛΙΝΗ ΠΟΡΤΑ GLASS DOOR
ΓΥΑΛΙΝΗ ΠΟΡΤΑ GLASS DOOR ΠΟΡΤΑ ΘΑΛΑΜΟΥ ΚΕΝΤΡΙΚΗ ΓΥΑΛΙΝΗ FULL GLASS CENTRAL CABIN DOOR.1. C ΚΑΘΑΡΟ ΑΝΟΙΓΜΑ ΚΑ / CLEAR OPENING CO ΜΗΧΑΝΙΣΜΟΣ Μ / OPERATOR O 1/2 ΚΑ + 00 / 1/2 CO + 00 220 4 22 ΤΥΠΟΠΟΙΗΜΕΝΟ
CRASH COURSE IN PRECALCULUS
CRASH COURSE IN PRECALCULUS Shiah-Sen Wang The graphs are prepared by Chien-Lun Lai Based on : Precalculus: Mathematics for Calculus by J. Stuwart, L. Redin & S. Watson, 6th edition, 01, Brooks/Cole Chapter
Table. GT2 by Zeiss. Gray Glasss. Gray/Brown GT Gray/Brown. Version 01/ /14
GT2 by Zeiss - Fact Sheets Table of Contents GT2 by Zeiss GT2 1.67 High Index GT2 1.67 High Index PhotoFusion Gray/Brown GT2 1.67 High Index Transitions Gray/Brown n GT2 1.6 Clear Glass GT2 1.6 Photochromic
H ΚΛΕΙΔΑΡΙΑ ΣΤΟ MAXIMUM
H ΚΛΕΙΔΑΡΙΑ ΣΤΟ MAXIMUM ΝΕΟ Kλειδαριά γραναζωτή ΠΡΟΪΟΝ για όλες τις σειρές αλουμινίου Η κλειδαριά TOP GEAR μπορεί να χρησιμοποιηθεί σε κάθε ανοιγόμενο προφίλ αλουμινίου. Αποτελείται από την κεντρική κλειδαριά
E Style. Turning Inserts
Turning Inserts ATI Stellram s Posicut range o positive inserts and olders, along wit te Poismatic range or small part macining or medical and watcmaker components. Te E Style Program, developed exclusively
OTK OTK OTK b OTK a a a 1076 OTK OTK
1114 1113 1064 1019 1065 1115 1027 1093 1074-b 1090-a 1074-a 1025 1086-a 1076 1090 1117 2047 2048 2030 2036 2034 2046 2018 2027 2950 2002 2080 2951 2023 2024 2001 2017 2004 2014 2005 2013 2006 2007 2008
Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
1 9/64 1 7/64 1 1/16 1 1/32 1 1/16 1 1/32 1 3/8 1 11/ / /64 1 1/4 1 7/ Hex 22*108(7/8*4 1/4) 1 3/16 1 9/ / /32
Integral Drill Rod Integral Drill Steel Series D mm inch mm ft inch L 9 1 9/ 00 1' " 001909 1.0 1 7/ 00 ' 7" 00190.10 Hex 19*10(7/* 1/) 1 7 1 1/1 1 1/ 100 00 ' " 7' 10" 001917 0019.90.0 1 00 10' " 0019
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
MINO system 398
398 MINO 100 ytem 399 max. 2000mm MINO 78 MINO Intallation channel (MM) 572 034-0065# 872 034-0095# 1172 034-0125# 1472 034-0155# 2230 034-0245# 2344 034-0255# 3000 034-0305# E830xxxx# MINO Blind cover
MINIMAL system
224 MINIMA 100 ytem 225 cutout (c) total OPA MICROPRISMATIC OUVER ED: total = +++... total - 2000mm - 00mm - 00mm - 00mm T5 HE lamp 14W/21W/28W/35W cutout = total + 5mm total + 7mm total + 9mm* total +
1 2 3 1) Milling Cutting heads Insert screw (thread) Key (Torx Plus) Screwdriver (Torx Plus)
GNRAL TURNING Spare parts CoroTurn SL cutting heads T-Max P lever design 1 2 3 4 5 6 Cutting heads Lever Screw Key (mm) Shim For insert Thickness (radius) Shim pin Shim pin punch R/L 571.31C-323222-12
FRAME system 256
256 FRAME 120 ytem 257 cutout (c) total OPA MICROPRISMATIC OUVER ED: total = +++... total - 2000mm - 00mm - 00mm - 00mm - 10000mm - 12000mm - 100mm T5 HE lamp 14W/21W/28W/35W cutout = total + 5mm total
Fourier Series. MATH 211, Calculus II. J. Robert Buchanan. Spring Department of Mathematics
Fourier Series MATH 211, Calculus II J. Robert Buchanan Department of Mathematics Spring 2018 Introduction Not all functions can be represented by Taylor series. f (k) (c) A Taylor series f (x) = (x c)
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Shenzhen Lys Technology Co., Ltd
Carbide drawing dies Properties of grade Grade Density TRS Average Grain size Hardness (HRA) (g/cm3) (MPa) (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5
ΠΟΡΤΕΣ ΑΝΑΚΑΙΝΙΣΗΣ DOORS FOR MODERNIZATION
ΠΟΡΤΕΣ ΑΝΑΚΑΙΝΙΣΗΣ DOORS FOR MODERNIZATION ΠΟΡΤΑ ΟΡΟΦΟΥ ΚΕΝΤΡΙΚΗ 2ΦΥΛΛΗ 2 PANELS CENTRE PARTING LANDING DOOR.1. Πόρτα ορόφου χωρίς κάσωμα, για ανακαινίσεις Landing door without frames, for modernization
Galatia SIL Keyboard Information
Galatia SIL Keyboard Information Keyboard ssignments The main purpose of the keyboards is to provide a wide range of keying options, so many characters can be entered in multiple ways. If you are typing
Series of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
ΚΩΔ / CODE CT-100 ΚΩΔ / CODE CT-110 ΚΩΔ / CODE CT-111
8 9 ΚΩΔ / CODE CT-100 ΛΟΥΚΙΑ ΑΛΟΥΜΙΝΙΟΥ (οριζόντια) Ο ΤΥΠΟΣ ΑΥΤΟΣ ΛΕΓΕΤΑΙ 5 Κ-STYLE ΔΙΑΤΙΘΕΤΑΙ ΣΕ ΜΕΓΕΘΗ 1.00μ 1.50μ 2.00μ2.50μ 3.00μ 3.50μ 4.00μ 4.50μ 5.00μ 5.50μ 6.00μ ΔΙΑΤΙΘΕΤΑΙ ΣΕ ΕΝΤΕΚΑ ΜΟΝΑΔΙΚΑ ΧΡΩΜΑΤΑ
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΠΑΝΕΠΙΣΤΗΜΙΟ ΚΡΗΤΗΣ. Ψηφιακή Οικονομία. Διάλεξη 10η: Basics of Game Theory part 2 Mαρίνα Μπιτσάκη Τμήμα Επιστήμης Υπολογιστών
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΠΑΝΕΠΙΣΤΗΜΙΟ ΚΡΗΤΗΣ Ψηφιακή Οικονομία Διάλεξη 0η: Basics of Game Theory part 2 Mαρίνα Μπιτσάκη Τμήμα Επιστήμης Υπολογιστών Best Response Curves Used to solve for equilibria in games
Parts catalogue LAWN MOWER
OREC ISSUED NO. GRH535PRO-3 Parts catalogue LAWN MOWER (EXPORT MODEL) GRH535PRO(2Action) MODEL GRH535PRO CODE 0276- CONTENTS Fig. 1 GEAR CASE -------------------------------------- 1 Fig. 2 GEAR CASE INSIDE,
Tabela 1. Table 1 working slat. Spare parts. Rear-attached disc mower Z108/8 2,5m with swath spreader
1 2 12 2 1 2 1 1 2 21 2 2 2 0 2 11 2 1 1 2 2 1 1 1 Tabela 1 Table 1 working slat Table 1 Cat. No. or Standard Qty No. Part name Z/ 2.m Z/ Working slat set. Contains: tab.1. pos.: 1- /1-000 tab.2. pos.:
Super. Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY EDITION 2019 High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
3.4 SUM AND DIFFERENCE FORMULAS. NOTE: cos(α+β) cos α + cos β cos(α-β) cos α -cos β
3.4 SUM AND DIFFERENCE FORMULAS Page Theorem cos(αβ cos α cos β -sin α cos(α-β cos α cos β sin α NOTE: cos(αβ cos α cos β cos(α-β cos α -cos β Proof of cos(α-β cos α cos β sin α Let s use a unit circle
The Simply Typed Lambda Calculus
Type Inference Instead of writing type annotations, can we use an algorithm to infer what the type annotations should be? That depends on the type system. For simple type systems the answer is yes, and
Dealer Catalogue for Wholesale Cabinetry
Dealer Catalogue for Wholesale Cabinetry As of December 8, 2011 Country Oak Classic SILVER K-Series Honey K-Series Cherry Glaze K-Series Cinnamon Glaze Santa Fe Shakertown GOLD Pepper Shaker Ice White
INDUSTRIAL SELF TIGHTEN INDUSTRIAL CHUCKS FOR COLUMN OR CNC DRILLING MACHINE
108 Drill chucks & accessories Pink
Group 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
COMADEX. PCBN - PCD inserts
PCBN - PCD inserts 03/2011 P CCMT EW CCMW EW CNMN DCMW EW Page 1 Page 1 Page 2 Page 2 C RNGN Solid RNGN FullFace RCGX FullFace SNGN Solid B Page 3 Page 3 Page 3 Page 4 SNMN SCMW EW TCMW EW TPGN EW N Page
FDL - FXDL FBDL SERIES
FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15 Floor standing single coil DHW storage tanks Material: teel sheet EN-10130
PCD CBN CVD Diamond. (Element Six TM )
PCD CBN CVD Diamond (Element Six TM ) 01744 889726 sales@rainfordprecision.com PCD/CVD/CBN cutting tools Table of Contents PCD End mills (CVD & CBN upon request) REF. 4010 Page PCD End mills with ball
Data Sheet. EI Bimetal Thermometer
FETURE Hermetically sealed case to prevent entry of moisture, interior corrosion and coil freeze up Maxivision dial for precise readings (minimize parallax reading errors) ilicone dampened coil for reduction
1. Panel Plus vertical 2. Panel Plus horizontal 3. Panel Plus Skirting model Wall 4. Panel Plus Skirting model Free-standing 5.
2 1 3 4 5 162 1. Panel Plu vertical 2. Panel Plu hrizntal 3. Panel Plu Skirting mdel Wall 4. Panel Plu Skirting mdel Free-tanding 5. Bench radiatr 164 Panel Plu vertical 165 Panel Plu_vertical Dimenin
A, B. Before installation of the foam parts (A,B,C,D) into the chambers we put silicone around. We insert the foam parts in depth shown on diagram.
Corner Joints Machining, Frame edge sealing. Page ID: frame01 D D C A, B A C B C A 20 60 Before installation of the foam parts (A,B,C,D) into the chambers we put silicone around. We insert the foam parts
TITANIUM EXPERT TOOLS TITANIUM. Ask for the full catalogue! LOUIS BÉLET S.A. Les Gasses 11 CH Vendlincourt
TITANIUM Ask for the full catalogue! EXPERT TOOLS TITANIUM LOUIS BÉLET S.A. Les Gasses 11 CH - 2943 Vendlincourt www.louisbelet.ch SWISS MADE Titanium Stainless steel Composite Brass Aluminium EXPERT cutting
ΕΝΔΕΙΚΤΙΚΕΣ ΚΑΤΑΣΚΕΥΕΣ - INDICATIVE STRUCTURES 4 Πάνελ Κάθετα 4 Panel Portrait 6660 Ψαλίδι για 4 κάθετα πάνελ. Διατίθεται επίσης σε 12 και 10 μοίρες. Base for 4 portrait panels. Also available at 12 and
MODEL D25-42 D30-42 DIESEL PILE HAMMER SPARE PARTS BOOK
MODEL D25-42 D30-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710 2 No. Parts-No. Description
D36-42 D46-42 D50-42 MODEL DIESEL PILE HAMMER SPARE PARTS BOOK
MODEL D36-42 D46-42 D50-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710 2 No. Parts-No. Description
MODEL D62-42 D70-42 DIESEL PILE HAMMER SPARE PARTS BOOK
MODEL D62-42 D70-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710 2 No. Parts-No. Description
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
RSX Series. Radius Cutter for Machining of Stainless Steel and Exotic Material. Non-ferrous Metal. High Performance Milling Systems.
High Performance illing Systems RSX Series Radius Cutter for achining of Stainless Steel and Exotic aterial. Non-ferrous etal Stainless Steel Exotic aterial RSX Features & Benefits Wide application range
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
; +302 ; +313; +320,.
1.,,*+, - +./ +/2 +, -. ; +, - +* cm : Key words: snow-water content, surface soil, snow type, water permeability, water retention +,**. +,,**/.. +30- +302 ; +302 ; +313; +320,. + *+, *2// + -.*, **. **+.,
13111203 P.R.O. Tri Sprint Suit
13111203 P.R.O. Tri Sprint Suit The P.R.O. Tri Sprint Suit features our Transfer Repel fabric which is hydrodynamic perfect for short distance races such as sprint or Olympic but can also be worn over
Operating Instructions and Parts Manual Drum Sander Model PM2244
Operating Instructions and Parts Manual Drum Sander Model PM2244 Powermatic 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-1792244 Ph.: 800-274-6848 Edition 1 08/2015 www.powermatic.com Copyright
RCS750 3-circuit square track system flexible and multifunctional
Lighting RCS750 3-circuit square track system flexible and multifunctional 3-circuit Square RCS750 The RCS750 3-circuit square track system is made up of a solid aluminum track available in lengths of
C.S. 430 Assignment 6, Sample Solutions
C.S. 430 Assignment 6, Sample Solutions Paul Liu November 15, 2007 Note that these are sample solutions only; in many cases there were many acceptable answers. 1 Reynolds Problem 10.1 1.1 Normal-order
Distances in Sierpiński Triangle Graphs
Distances in Sierpiński Triangle Graphs Sara Sabrina Zemljič joint work with Andreas M. Hinz June 18th 2015 Motivation Sierpiński triangle introduced by Wac law Sierpiński in 1915. S. S. Zemljič 1 Motivation
Κατάλογος Βάσεων Στήριξης Για Βιομηχανική Οροφή Base Cataloge For Industrial Rooftops ΚΑΤΑΛΟΓΟΣ ΥΛΙΚΩΝ - PRODUCT CATALOGE
ΚΑΤΑΛΟΓΟΣ ΥΛΙΚΩΝ - PRODUCT CATALOGE Κατάλογος Βάσεων Στήριξης Για Βιομηχανική Οροφή Base Cataloge For Industrial Rooftops tel: 00302109653270 fax: 00302109653180 mail:info@pvmounting.gr ΠΕΡΙΓΡΑΦΗ ΣΥΣΤΗΜΑΤΟΣ
MIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
HFM. Small Diameter Machining High Feed Tool. High Feed Mill HFM. Stable machining, high efficiency milling tools For small diameter machining.
High Feed Mill Small Diameter Machining High Feed Tool Stable machining, high efficiency milling tools For small diameter machining. High Feed / High Efficiency Machining Increase productivity through
ENGRAVING / CHAMFERING SELECTION OF ENGRAVING TOOLS 1/2 ENGRAVING TOOLS 2/3 ENGRAVING TOOLS 3/4 ENGRAVING TOOLS DIAMOND & PCD ENGRAVING TOOLS
EGRAVIG / CHAMFERIG SELECTIO OF EGRAVIG TOOLS 216 1/2 EGRAVIG TOOLS 220 2/3 EGRAVIG TOOLS 221 3/4 EGRAVIG TOOLS 222 DIAMOD & CD EGRAVIG TOOLS 223 HELICAL EGRAVIG TOOLS 224 SEMI-FIISHED EGRAVIG TOOLS 224
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Cable Systems - Postive/Negative Seq Impedance
Cable Systems - Postive/Negative Seq Impedance Nomenclature: GMD GMR - geometrical mead distance between conductors; depends on construction of the T-line or cable feeder - geometric mean raduius of conductor
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΠΑΝΕΠΙΣΤΗΜΙΟ ΚΡΗΤΗΣ. Ψηφιακή Οικονομία. Διάλεξη 9η: Basics of Game Theory Mαρίνα Μπιτσάκη Τμήμα Επιστήμης Υπολογιστών
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ ΠΑΝΕΠΙΣΤΗΜΙΟ ΚΡΗΤΗΣ Ψηφιακή Οικονομία Διάλεξη 9η: Basics of Game Theory Mαρίνα Μπιτσάκη Τμήμα Επιστήμης Υπολογιστών Course Outline Part II: Mathematical Tools Firms - Basics of Industrial
Ρολό Αλουμινίου Θζςεισ Σοποκζτθςθσ & Επιμζτρθςθ Βιβλίο 201 ο. Rolo Shutter Kind of Installation & Measurment Book 201st
Ρολό Αλουμινίου Θζςεισ Σοποκζτθςθσ & Επιμζτρθςθ Βιβλίο 201 ο Rolo Shutter Kind of Installation & Measurment Book 201st Καταςκευι & Εμπορία Ρολϊν & Εμπορία Εξαρτθμάτων τουσ Λεωφ Καραμανλι 54 Αχαρναι Σ.Κ
π H-4709 BIG JOE ELECTRIC PALLET TRUCK uline.com STEERING ARM
-00--0 STEERING ARM 0 0 PAGE OF -00--0 STEERING ARM PARTS LIST Screw, M x ---------- 0000-000-00 Lock Washer, M ---------- 0000-000-00 Screw, M x ---------- 0000-000-00 Plate ---------- -0000-00 Bracket
X-STAR series. Neo classic. What do you want? PATENTED
EX, HA-NA TOOLS CO.,LTD. PATENTED Neo classic X-STA series - High Performance & High Effectiveness in slotting! - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD
department listing department name αχχουντσ ϕανε βαλικτ δδσϕηασδδη σδηφγ ασκϕηλκ τεχηνιχαλ αλαν ϕουν διξ τεχηνιχαλ ϕοην µαριανι
She selects the option. Jenny starts with the al listing. This has employees listed within She drills down through the employee. The inferred ER sttricture relates this to the redcords in the databasee
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Reminders: linear functions
Reminders: linear functions Let U and V be vector spaces over the same field F. Definition A function f : U V is linear if for every u 1, u 2 U, f (u 1 + u 2 ) = f (u 1 ) + f (u 2 ), and for every u U
J Ordering code. Facemilling 45. MILLING Inserts for other cutters D 146 SEKR. P M K N S H Dimensions, mm GC GC CT - GC GC - GC GC - CT - - - GC
General Turning Facemilling 45 Inserts for other cutters Threading SR SKR SKN J Ordering code P M K N S H imensions, mm GC GC CT - GC GC - GC GC - CT - - - GC 4030 4040 530 S6 2030 2040 S6 3020 3040 530
ΓΩΝΙΑ ΣΤΗΡΙΞΗΣ L - ΕΛΑΦΡΟΥ ΤΥΠΟΥ
ΓΩΝΙΑ ΣΤΗΡΙΞΗΣ L - ΕΛΑΦΡΟΥ ΤΥΠΟΥ BEND SUPPORT L - LIGHT TYPE 75x100 BLL.0075.0100.200 Επιμήκη οπές 8x35 Oblong holes 8x35 100x150 BLL.0100.0150.200 150x200 BLL.0150.0200.200 200x300 BLL.0200.0300.200 200x400
Statistical Inference I Locally most powerful tests
Statistical Inference I Locally most powerful tests Shirsendu Mukherjee Department of Statistics, Asutosh College, Kolkata, India. shirsendu st@yahoo.co.in So far we have treated the testing of one-sided
Code Breaker. TEACHER s NOTES
TEACHER s NOTES Time: 50 minutes Learning Outcomes: To relate the genetic code to the assembly of proteins To summarize factors that lead to different types of mutations To distinguish among positive,
Vacuum Pad Standard Type
Quickfitting Type Vacuum Pad Vacuum Pad tandard Type Features ntistatic rubber low resistance type is made up of carbonadded butadiene and its surface resistance become less than 00Ω. The surface resistance
ΠANEΠIΣTHMIO ΠATPΩN TMHMA MHXANOΛOΓΩN ΚΑΙ ΑΕΡΟΝΑΥΠΗΓΩΝ MHXANIKΩN
ΠANEΠIΣTHMIO ΠATPΩN TMHMA MHXANOΛOΓΩN ΚΑΙ ΑΕΡΟΝΑΥΠΗΓΩΝ MHXANIKΩN Εργαστήριο Συστημάτων Παραγωγής και Αυτοματισμού Διδάσκων: Αναπλ. Καθηγητής Δ. Μούρτζης ΑΡΙΘΜΗΤΙΚΟΣ ΕΛΕΓΧΟΣ ΕΡΓΑΛΕΙΟΜΗΧΑΝΩΝ CNC Εργαστηριακή
Η διεπιστημονική ορολογία του τομέα διαχείρισης φυσικών κινδύνων Το παράδειγμα του σεισμικού κινδύνου
Η διεπιστημονική ορολογία του τομέα διαχείρισης φυσικών κινδύνων Το παράδειγμα του σεισμικού κινδύνου ΠΕΡΙΛΗΨΗ Βασιλική Μασούρα Ο τομέας της διαχείρισης φυσικών κινδύνων είναι ένας χώρος συνάντησης της
ΣΥΝΟΠΤΙΚΟΣ ΠΙΝΑΚΑΣ /SUMMARY...3 ΠΡΟΦΙΛ /PROFILES...5 ΤΥΠΟΛΟΓΙΑ /TYPOLOGY...13 ΤΟΜΕΣ /SECTIONS...15 ΕΞΑΡΤΗΜΑΤΑ /ACCESSORIES...42
ΣΥΝΟΠΤΙΚΟΣ ΠΙΝΑΚΑΣ /SUMMARY...3 ΠΡΟΦΙΛ /PROFILES...5 ΤΥΠΟΛΟΓΙΑ /TYPOLOGY...13 ΤΟΜΕΣ /SECTIONS...15 ΕΞΑΡΤΗΜΑΤΑ /ACCESSORIES...42 ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ ASSEMBLYINSTRUCTIONS...48 ΜΕΤΡΑΚΟΠΗΣ /CUTTING DIMENSIONS...53
THREAD TURNING CONTENTS. Technical Information 30. External Toolholders 34. Inrernal Toolholders 35. Thread Turning Inserts 36
THREA TURNING CONTENTS Technical Information 0 N External Toolholders Inrernal Toolholders Thread Turning s Kit with ifferent s External U-Toolholders Inrernal U-Toolholders U-Thread Turning s Toolholders,
Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. Single-Chip Voice Record/Playback Devices 60-, 75-, 90-, and 20-Second Durations
Ημικυκλικές υδρορροές που ξεχωρίζουν. Half round gutters that distinguish
Ημικυκλικές υδρορροές που ξεχωρίζουν Πρόκειται για υδρορροή με μοναδικό ημικυκλικό σχήμα, δίνοντας στο χώρο σας άριστη λειτουργικότητα και ξεχωριστή αισθητική, είναι διαθέσιμη σε μεγάλη ποικιλία χρωμάτων
(A Member of the Amalgamations Group)
1873 (A Member of the Amalgamations Group) Addison & Co. Ltd., Established in 1873, an ISO 9001:2008 QMS & ISO 14001-2004 EMS accredited Company, is India s largest manufacturer of High Speed Steel Metal
SOLID CARBIDE TOOLS. Milling / Drilling / Reaming EN.
SOLID CARBIDE TOOLS Milling / Drilling / Reaming EN www.ceratizit.com SOLID CARBIDE TOOLS MAIN CATALOGUE 4 Introduction Contents Introduction Solid carbide tools for drilling E-Techstore 10 Introduction
ERGALIOKOPTIKI. Edge technology cutting tools. Utype endmills Κοντύλια καρβιδίου για πλέξι και πλαστικά. Αρ.εντύπου P201607
ERGALIOKOPTIKI Edge technology cutting tools Utype endmills Κοντύλια καρβιδίου για πλέξι και πλαστικά Αρ.εντύπου P201607 Utype carbide endmills Νέος τύπος Utype κατάλληλο για την κοπή,διάτρηση πλαστικών
EE512: Error Control Coding
EE512: Error Control Coding Solution for Assignment on Finite Fields February 16, 2007 1. (a) Addition and Multiplication tables for GF (5) and GF (7) are shown in Tables 1 and 2. + 0 1 2 3 4 0 0 1 2 3
Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input