X-STAR series. Neo classic. What do you want? PATENTED
|
|
|
- Ιόλη Ασπάσιος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 EX, HA-NA TOOLS CO.,LTD. PATENTED Neo classic X-STA series - High Performance & High Effectiveness in slotting! - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD What do you want?
2 Unique Patented Design θ θ - High precision and excellent surface due to each F broken index geometry. - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD θ θ2 θ θ θ θ2 Test eport NEO CLASSIC X-STA * Cutting Condition - PM :,2 - Feed : mm/min - Tool : XE0(Ø) - Slotting : xd (Ad : mm, d : mm) - Workpiece : SUS0 COMPETITO Workpiece Surface -POFILE_Neo Classic X-Star EVA-L.0mm λc 0.mmX a z q 0.9μm.00μm 0.2μm Ver. 2.0 μm /cm Hor. 0.0 μm /cm x x K -POFILE_Competitor EVA-L.0mm λc 0.mmX a z q.02μm.7μm.2μm Ver. 2.0 μm /cm Hor. 0.0 μm /cm x x K
3 XEA...series EDP. No. XEA00 XEA0 XEA0 XEA0 XEA0 XEA07 XEA0 XEA0 XEA022 XEA02 XEA02 XEA02 XEA00 XEA02 XEA0 XEA0 XEA00 XEA0 XEA0 Dia. / /2 / 7/2 / / 9/2 / /2 / /2 7/ /2 9/ / / Flat shank is available upon request ex) XEA02F : Flat shank C.L / 7/ 7/ 7/ / / / / 7/ / -/ -/ -/ - - FLUTE, EGULA LENGTH - High precision and excellent surface due to each F broken index geometry. - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD OAL / 2-/ -/ - - SH.Dia. / / / / / / / / / / 7/ 7/ 9/ / / ULTA FINE HELIX STOCK Data P~ END MILLS >Fractional Neo Classic X-STA Series Tolerance of Mill Dia. (inch) Tolerance of Shank Dia. from / up to / 0 ~ -.00 over / up to / 0 ~ ~ over / up to 0 ~ ~ Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
4 END MILLS >Fractional Neo Classic X-STA Series X0A...series FLUTE, SHOT LENGTH, CONE ADIUS - High precision and excellent surface due to each F broken index geometry. - Corner radius against chipping in high performance maching. ULTA FINE HELIX EDP. No. X0A00 X0A0 X0A0 X0A0 X0A0 X0A0 X0A02 X0A02 X0A02 X0A00 X0A0 Dia. / /2 / 7/2 / / / 7/ / /.0~.0.0~.0.0~.0.0~.0.0~.0.0~.0.0~.0.0~.0.0~.00.0~.00.0~.00 C.L / / / / 7/ / / / / OAL SH. Dia. / / / / / / / 7/ / / STOCK Flat shank is available upon request ex) X0A02F : Flat shank Data P~ Tolerance of Mill Dia. (inch) Tolerance of Shank Dia. from / up to / 0 ~ -.00 over / up to / 0 ~ ~ over / up to 0 ~ ~ Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
5 XA...series EDP. No. XA00 XA0 XA0 XA07 XA0 XA02 XA02 XA02 XA0 XA0 XA00 XA0 XA0 Dia. / / / / / / 7/ 9/ / / Flat shank is available upon request ex) XA02F : Flat shank.0~.0.0~.0.0~.0.0~.0.0~.0.0~.0.0~.0.0~.00.0~.00.0~.00.0~.00.0~.00.0~.00 C.L / 7/ / / 7/ -/ -/ -/ - - FLUTE, EGULA LENGTH, CONE ADIUS - High precision and excellent surface due to each F broken index geometry. - Corner radius against chipping in high performance maching. OAL / -/ - - ULTA FINE SH. Dia. / / / / / / 7/ 9/ / / HELIX STOCK Data P~ END MILLS >Fractional Neo Classic X-STA Series Tolerance of Mill Dia. (inch) Tolerance of Shank Dia. from / up to / 0 ~ -.00 over / up to / 0 ~ ~ over / up to 0 ~ ~ Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
6 END MILLS >Fractional Neo Classic X-STA Series XA... series FLUTE, EGULA LENGTH, CONE ADIUS - High precision and excellent surface due to each F broken index geometry. - Applied various corner radius. EDP. No. Dia. C.L OAL SH.Dia XA000 XA000 XA00 XA00 XA000 XA0 XA0 XA00 XA070 XA070 XA0700 XA00 XA000 XA0 XA0 XA00 XA0 XA00 XA0 XA00 XA0 XA0 XA00 XA0 XA00 XA090 XA0 / / / / / 7/ / 7/ / / 7/ / ULTA FINE / / / / / 7/ HELIX 0~-.002 Stock WIDIN. CO. LTD.
7 Neo Classic X-STA Series END MILLS >Fractional EDP. No. Dia. C.L OAL SH.Dia XA00 XA00 XA000 XA00 XA000 XA0090 XA0 XA000 XA0000 XA000 XA0000 XA00090 XA00 XA000 XA00 XA000 XA0090 XA0 XA000 XA00 XA000 XA0090 XA0 9/ / / / -/ -/ - - -/ - - 9/ / / Flat shank is available upon request ex) XA0F : Flat shank Stock Data P~ Tolerance of Mill Dia. (inch) Tolerance of Shank Dia. from / up to / 0 ~ -.00 over / up to / 0 ~ ~ over / up to 0 ~ ~ Items can be changed for quality improvement without notice. WIDIN. CO. LTD. 7
8 END MILLS >Fractional Neo Classic X-STA Series X2A...series FLUTE, LONG EACH, CONE ADIUS - High precision and excellent surface due to each F broken index geometry. - Corner radius against chipping in high performance maching. ULTA FINE HELIX EDP. No. X2A0 X2A0 X2A02 X2A02 X2A02 X2A0 X2A00 X2A0 X2A0 Dia. / / / 7/ 9/ / /.0~.0.0~.0.0~.0.0~.0.0~.00.0~.00.0~.00.0~.00.0~.00 C.L / 7/ -/ -/ - - OAL SH. Dia. / / / 7/ 9/ / / STOCK Flat shank is available upon request ex) X2A02F : Flat shank Data P~ Tolerance of Mill Dia. (inch) Tolerance of Shank Dia. from / up to / 0 ~ -.00 over / up to / 0 ~ ~ over / up to 0 ~ ~ Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
9 FLUTE, EGULA LENGTH END MILLS >Metric XE...series - High precision and excellent surface due to each F broken index geometry. - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD ULTA FINE HELIX Neo Classic X-STA Series EDP. No. XE00 XE00 XE0 XE00 XE070 XE00 XE090 XE0 XE XE0 XE0 XE0 XE XE XE0 XE0 D 7 9 C.L OAL SH. Dia. STOCK Flat shank is available upon request ex) XE0F : Flat shank Data P~ Tolerance of Mill Dia. (mm) Diameter Tolerance Tolerance of Shank Dia. up to 0~-0.02 over 0~-0.0 h Items can be changed for quality improvement without notice. WIDIN. CO. LTD. 9
10 END MILLS >Metric Neo Classic X-STA Series X...series FLUTE, EGULA LENGTH - High precision and excellent surface due to each F broken index geometry. - Corner radius against chipping in high performance maching. ULTA FINE HELIX EDP. No. X00 X00 X0 X00 X070 X00 X090 X0 X X0 X0 X0 X X X0 X0 D C.L OAL SH. Dia. STOCK Flat shank is available upon request ex) X0F : Flat shank Data P~ Tolerance of Mill Dia. (mm) Diameter Tolerance up to 0~-0.02 over 0~-0.0 Tolerance of Shank Dia. h Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
11 D L XE...series D2 L2 L C D Chamfer FLUTE, STUB CUT LENGTH with EXTENDED NECK - High precision and excellent surface due to each F broken index geometry - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD * corner chamfer type( x 0.0~0.) ULTA FINE C HELIX 0.0~0. END MILLS >Metric Neo Classic X-STA Series EDP. No. XE0 XE0 XE XE0 XE0 XE XE XE XE D L L2 2 7 L D STOCK Flat shank is available upon request ex) XEF : Flat shank Data P~ Tolerance of Mill Dia. (mm) Diameter Tolerance Tolerance of Shank Dia. up to 0~-0.02 over 0~-0.0 h Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
12 END MILLS >Metric Neo Classic X-STA Series D D2 L XE2...series L2 L C D Chamfer FLUTE, STUB CUT LENGTH with EXTENDED LONG NECK - High precision and excellent surface due to each F broken index geometry - The unique patented design decrease chatter and resonance, can achieve a Axial Depth XD * corner chamfer type( x 0.0~0.) ULTA FINE C HELIX 0.0~0. EDP. No. XE XE XE XE XE2 D L L2 L D STOCK Flat shank is available upon request ex) XEF : Flat shank Data P~ Tolerance of Mill Dia. (mm) Diameter Tolerance up to 0~-0.02 over 0~-0.0 Tolerance of Shank Dia. h Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
13 X...series FLUTE, EGULA LENGTH - High precision and excellent surface due to each F broken index geometry - Applied various corner radius. EDP. No. D C.L OAL SH.Dia X02 X0 X0 X0 X0 X X 0. X.0 X0 X X X X.0 X. 9 0 X X X.0 X X X X X X X0 X X X0 X0 X X Flat shank is available upon request ex) XF : Flat shank ULTA FINE HELIX 0.02 Stock Data P~ END MILLS >Metric Neo Classic X-STA Series Tolerance of Mill Dia. (mm) Diameter Tolerance up to 0~-0.02 over 0~-0.0 Tolerance of Shank Dia. h Items can be changed for quality improvement without notice. WIDIN. CO. LTD.
14 END MILLS >Fractional Technical Data - ecommendation of Cutting Conditions ecommendation of Cutting Conditions X-STA series, Fractional WOKPIECE LOW CABON STEELS LOW CABON STEELS MED ALLOY STEELS MOLD&DIE STEELS CAST ION-GAY CAST ION-DUCTILE HADNESS D(Fractional) / / / / / 7/ 9/ / / PM = rev. / min. FEED = mm / min. ~HB ~HB2 2 0 Use a rigid and precise machines and holders. Use a suitable cutting fluids. XD ~HB ~HB Ad.XD ~HB d 0.XD ~HB X-STA series, Fractional WOKPIECE HADNESS D(Fractional) / / / / / 7/ 9/ / / CAST ION- MALLEABLE ~HB STAINLESS 00 SEIES STAINLESS 00 SEIES STAINLESS PH SEIES TITANIUM ALLOYS HIGH TEMP ALLOYS ~HB ~HB ~HB ~HB ~HB PM = rev. / min. FEED = mm / min. XD Ad.XD d 0.XD Use a rigid and precise machines and holders. Use a suitable cutting fluids. WIDIN. CO. LTD.
15 ecommendation of Cutting Conditions X-STA series(slotting), Fractional END MILLS >Fractional PM = rev. / min. FEED = mm / min. WOKPIECE HADNESS D(Fractional) / / / / / 7/ 9/ / / Ad 0.XD PM HADENED STEELS HC0~ FEED Technical Data - ecommendation of Cutting Conditions Use a rigid and precise machines and holders. Use a suitable cutting fluids. X-STA series(side Cutting), Fractional WOKPIECE HADENED STEELS HADNESS D(Fractional) PM HC0~ FEED / / / / / 7/ 9/ / / PM = rev. / min. FEED = mm / min. Ad XD d 0.XD Use a rigid and precise machines and holders. Use a suitable cutting fluids. WIDIN. CO. LTD.
16 END MILLS >Metric ecommendation of Cutting Conditions X-STA series(high Speed Cutting), Fractional Technical Data - ecommendation of Cutting Conditions PM = rev. / min. FEED = mm / min. WOKPIECE HADNESS D(Fractional) / / / / / 7/ 9/ / / Ad 0.XD PM d 0.XD HADENED STEELS HC0~ FEED Use a rigid and precise machines and holders. Use a suitable cutting fluids. X-STA series, Metric WOKPIECE LOW CABON STEELS LOW CABON STEELS MED ALLOY STEELS MOLD&DIE STEELS CAST ION-GAY CAST ION-DUCTILE HADNESS D(mm) ~HB ~HB ~HB ~HB ~HB ~HB PM = rev. / min. FEED = mm / min. XD Ad.XD d 0.XD Use a rigid and precise machines and holders. Use a suitable cutting fluids. WIDIN. CO. LTD.
17 ecommendation of Cutting Conditions X-STA series, Metric END MILLS >Metric WOKPIECE CAST ION-MALLEABLE STAINLESS 00 SEIES STAINLESS 00 SEIES STAINLESS PH SEIES TITANIUM ALLOYS HIGH TEMP ALLOYS HADNESS D(mm) PM = rev. / min. FEED = mm / min. ~HB ~HB XD ~HB ~HB Ad.XD ~HB d 0.XD ~HB Technical Data - ecommendation of Cutting Conditions Use a rigid and precise machines and holders. Use a suitable cutting fluids. X-STA series(slotting), Metric WOKPIECE HADENED STEELS HADNESS D(mm) PM HC0~ FEED PM = rev. / min. FEED = mm / min. Ad 0.XD Use a rigid and precise machines and holders. Use a suitable cutting fluids. WIDIN. CO. LTD. 7
18 END MILLS >Metric ecommendation of Cutting Conditions X-STA series(side Cutting), Metric Technical Data - ecommendation of Cutting Conditions PM = rev. / min. FEED = mm / min. WOKPIECE HADNESS D(mm) Ad XD PM d 0.XD HADENED STEELS HC0~ FEED Use a rigid and precise machines and holders. Use a suitable cutting fluids. X-STA series(high Speed Cutting), Metric WOKPIECE HADENED STEELS HADNESS D(mm) PM HC0~ FEED PM = rev. / min. FEED = mm / min. Use a rigid and precise machines and holders. Use a suitable cutting fluids. Ad 0.XD d 0.XD WIDIN. CO. LTD.
19 Map Best Tools, Best Choice... For Your Vision Seoul Office TEL ~ FAX Shihwa Office TEL FAX Bucheon Office TEL FAX Suwon Office TEL FAX Daegu Office TEL FAX Ulsan Office TEL FAX Busan Office TEL FAX Changwon Office TEL FAX Head Office & Changwon Factory 2-, Sungju-Dong, Changwon-City, Gyeongnam, Korea, -0 TEL : FAX : WIDIN TEC CO.,LTD. 2-, Joongri -Dong, SeoGu, DaeGu-City, Korea, 70- TEL : ~, ~90 FAX : , Chicago Office(WIDIN. INC.) 0 E. Devon Ave Suite 2 Des Plaines, IL 00 TEL : FAX : Shanghai Office(WEIJING(SHANGHAI)TADE CO.,LTD.) G-A0 No, Hi-Tech Dingworld zone, Beijing oad(east), Shanghai, China 000 TEL : , 7 FAX :
20 EX, HA-NA TOOLS CO.,LTD. Head Office & Changwon Factory 2-, Sungju-Dong, Changwon-City, Gyeongnam, Korea, -0 TEL : FAX : WIDIN TEC CO.,LTD. 2-, Joongri -Dong, Seo-Gu, DaeGu-City, Korea, 70- TEL : ~, ~90 FAX : , Chicago Office(WIDIN.INC) 0 E. Devon Ave Suite 2 Des Plaines, IL 00 TEL : FAX : Shanghai Office(WEIJING(SHANGHAI)TADE CO.,LTD.) G-A0 No, Hi-Tech Dingworld zone, Beijing oad(east), Shanghai, China 000 TEL : , 7 FAX : /
IABPF/ABPF. Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULAR STYLE FEATURES
Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULA STYLE FEATUES ATH Coated Inserts are ideal for high-speed and high-efficiency machining of hardened steels ACS Coated Inserts are
Super. Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY EDITION 2019 High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
Supercut Spade Drill System
rill wide range of sizes with just one drill PMS 298 (Light lue) PMS (Text Metal Effect) 7 1 NEW EXTENE RANGE OR 214 TECH NEWS 7 PMS (Text Metal Effect) 1 Spade rill Holders Technical Guide Spade rill
FORM TOOLS APPLICATION FORM CUTTERS HSS-E & HSS SUPERIOR PERFORMANCE IDEAL FOR MATERIAL GROUPS
UERIOR ERFORMACE FORM TOO H-E & H AICATIO FORM CUTTER tandard weldon latted shank or B screwed shank, depending on tool type. H-E and H milling cutters for varying forms on a variety of materials remium
High Speed, Low Loss Multi-layer Materials
Data Sheet High Speed, Low Loss Multilayer Materials Laminate R5725 Prepreg R5620 UL/ANSI IPC4101 Slash Sheet FR4 Primary:/91 Secondary:/102(*) Jul. 2013 No.13070132 No.; 130701321 Property Units Test
SG Drill Series. High Performance PM-HSS Drills
SG Drill Series High Performance PM-HSS Drills SG Drill Series High performance PM-HSS Drills The combination of Powder Metal HSS and SG Coating provides the longest tool life in HSS coated drills. Ideal
Solid carbide drill For removal of broken taps or drilling difficult materials
General Turning DRILLING Hard cut drills Solid carbide drill For removal of broken taps or drilling difficult materials 5 D c Field of application: For removal of broken taps Drill diameter Dimensions,
(A Member of the Amalgamations Group)
1873 (A Member of the Amalgamations Group) Addison & Co. Ltd., Established in 1873, an ISO 9001:2008 QMS & ISO 14001-2004 EMS accredited Company, is India s largest manufacturer of High Speed Steel Metal
ENGRAVING / CHAMFERING SELECTION OF ENGRAVING TOOLS 1/2 ENGRAVING TOOLS 2/3 ENGRAVING TOOLS 3/4 ENGRAVING TOOLS DIAMOND & PCD ENGRAVING TOOLS
EGRAVIG / CHAMFERIG SELECTIO OF EGRAVIG TOOLS 216 1/2 EGRAVIG TOOLS 220 2/3 EGRAVIG TOOLS 221 3/4 EGRAVIG TOOLS 222 DIAMOD & CD EGRAVIG TOOLS 223 HELICAL EGRAVIG TOOLS 224 SEMI-FIISHED EGRAVIG TOOLS 224
Technical Information for Endmills Solid Endmills Solid Endmills Brazed Endmills Special Endmill order Form ENDMILLS Endmills
Technical Information for 02 04 Endmill Code System KORLOY Solid 07 Technical Information for H-MAX 10 H-MAX 12 Technical Information for H Endmill 15 H Endmill 17 Technical Information for V Endmill 19
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V Nov. 2015 No.15111336 Specification / Laminate R-1755V No.; 15111336-1 Property Units
MILLING INSERTS. S High temp. alloys. H Hardened Hardened 55 HRC 38 ISCAR USER GUIDE. Cutting Speed Recommendations for Indexable Milling Cutters
MILLIG ISERTS Cutting Speed Recommendations for Indexable Milling Cutters ISO Condition M on-alloy and cast, free cutting Low alloy and cast (less than 5% of alloying elements) High alloyed, cast, and
PCD CBN CVD Diamond. (Element Six TM )
PCD CBN CVD Diamond (Element Six TM ) 01744 889726 sales@rainfordprecision.com PCD/CVD/CBN cutting tools Table of Contents PCD End mills (CVD & CBN upon request) REF. 4010 Page PCD End mills with ball
RSX Series. Radius Cutter for Machining of Stainless Steel and Exotic Material. Non-ferrous Metal. High Performance Milling Systems.
High Performance illing Systems RSX Series Radius Cutter for achining of Stainless Steel and Exotic aterial. Non-ferrous etal Stainless Steel Exotic aterial RSX Features & Benefits Wide application range
GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing T Thermistor ST Series Temp. : -55 ~+25 TURS S type suitable for high density mounting Series of constant for various applications xcellent solderability PPTOS Telecommunication equipments
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing NT Thermistor SNT Series Temp. : -55 ~+25 TURS SM type suitable for high density mounting Series of constant for various applications xcellent solderability PPLTONS Telecommunication
Chip Temp. Sensing NTC Thermistor SDNT Series Operating Temp. : -55 ~+125
hip Temp. Sensing NT Thermistor SNT Series Temp. : -55 ~+25 TURS SM type suitable for high density mounting Series of constant for various applications xcellent solderability PPLTONS Telecommunication
ERGALIOKOPTIKI. Edge technology cutting tools. Utype endmills Κοντύλια καρβιδίου για πλέξι και πλαστικά. Αρ.εντύπου P201607
ERGALIOKOPTIKI Edge technology cutting tools Utype endmills Κοντύλια καρβιδίου για πλέξι και πλαστικά Αρ.εντύπου P201607 Utype carbide endmills Νέος τύπος Utype κατάλληλο για την κοπή,διάτρηση πλαστικών
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Groove Milling. High Precision Tools for Groove Milling INCH. Innovative Grooving & Turning Solutions
Groove Milling High Precision Tools for Groove Milling INCH Innovative Grooving & Turning Solutions Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove
Groove Milling High Precision Tools for Groove Milling
Groove Milling High Precision Tools for Groove Milling METRIC Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove Milling tools, for miniature and small
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
LOWARA e-nsce, e-nscs, e-nscf
End suction pumps LOWARA e-nsce, e-nscs, e-nscf Pumps made of cast iron e-nscs e-nscf e-nsce Description Specifications e-nsc normal priming pumps are designed for applications in the industrial and agricultural
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
TITANIUM EXPERT TOOLS TITANIUM. Ask for the full catalogue! LOUIS BÉLET S.A. Les Gasses 11 CH Vendlincourt
TITANIUM Ask for the full catalogue! EXPERT TOOLS TITANIUM LOUIS BÉLET S.A. Les Gasses 11 CH - 2943 Vendlincourt www.louisbelet.ch SWISS MADE Titanium Stainless steel Composite Brass Aluminium EXPERT cutting
1 9/64 1 7/64 1 1/16 1 1/32 1 1/16 1 1/32 1 3/8 1 11/ / /64 1 1/4 1 7/ Hex 22*108(7/8*4 1/4) 1 3/16 1 9/ / /32
Integral Drill Rod Integral Drill Steel Series D mm inch mm ft inch L 9 1 9/ 00 1' " 001909 1.0 1 7/ 00 ' 7" 00190.10 Hex 19*10(7/* 1/) 1 7 1 1/1 1 1/ 100 00 ' " 7' 10" 001917 0019.90.0 1 00 10' " 0019
HFM. Small Diameter Machining High Feed Tool. High Feed Mill HFM. Stable machining, high efficiency milling tools For small diameter machining.
High Feed Mill Small Diameter Machining High Feed Tool Stable machining, high efficiency milling tools For small diameter machining. High Feed / High Efficiency Machining Increase productivity through
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
STAINLESS STEEL WIRE &BAR
STAINLESS STEEL WIRE &BAR History 12345678 Superb Quality Diverse Products Quick Delivery Competitive Price COLD HEADING SeAH Metal Co,. Ltd. is endeavoring to develop better cold heading quality of stainless
Spindle Production Department
SPINDLE SERIES Spindle Production Department 1 2 Quality control & Accuracy measurement 1 2 1 Leitz pmm-c (Accuracy Grade.). 2 Concentricity & roundness measuring. Components inspection. 5 7 1 Single component
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
XKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
COMADEX. PCBN - PCD inserts
PCBN - PCD inserts 03/2011 P CCMT EW CCMW EW CNMN DCMW EW Page 1 Page 1 Page 2 Page 2 C RNGN Solid RNGN FullFace RCGX FullFace SNGN Solid B Page 3 Page 3 Page 3 Page 4 SNMN SCMW EW TCMW EW TPGN EW N Page
Daewoo Technopark A-403, Dodang-dong, Wonmi-gu, Bucheon-city, Gyeonggido, Korea LM-80 Test Report
LM-80 Test Report Approved Method: Measuring Lumen Maintenance of LED Light Sources Project Number: KILT1212-U00216 Date: September 17 th, 2013 Requested by: Dongbu LED Co., Ltd 90-1, Bongmyeong-Ri, Namsa-Myeon,
CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
ALUMINIUM EXPERT TOOLS ALUMINIUM. Ask for the full catalogue! LOUIS BÉLET S.A. Les Gasses 11 CH Vendlincourt
ALUMINIUM Ask for the full catalogue! EXPERT TOOLS ALUMINIUM LOUIS BÉLET S.A. Les Gasses 11 CH - 2943 Vendlincourt www.louisbelet.ch SWISS MADE Titanium Stainless steel Composite Brass Aluminium EXPERT
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
SOLID CARBIDE TOOLS. Milling / Drilling / Reaming EN.
SOLID CARBIDE TOOLS Milling / Drilling / Reaming EN www.ceratizit.com SOLID CARBIDE TOOLS MAIN CATALOGUE 4 Introduction Contents Introduction Solid carbide tools for drilling E-Techstore 10 Introduction
MINIATURE BALL BEARINGS 600 Series(Metric)
MINIATURE BALL BEARINGS 600 Series(Metric) Bore(d) OD(D) Width (B) Flange Dimensions Radius Basic Load Rating(lbs) Number mm mm Open Shielded Df Open Wf r Dy. (C) Sta.( Co) (lbs.) 682 2 5 1.5 2.3 6.1 0.5
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
レーザ結晶. Altechna 社. Laser Crystals. Ti:Sapphire crystals. High damage threshold Strong Kerr effect
Ti:Sapphire crystals Features Large gain-bandwidth Very large emission bandwidth Excellent thermal conductivity Short upper-state lifetime (3.2 μs) High saturation power Relatively high laser cross-sections
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Negative Temperature Coefficient Thermistor (NTC) Data Sheet
Negative Thermistor (NTC Series) Negative Thermistor (NTC) Data Sheet Feature Wide operating voltage range from φ5 to φ20 Style φ5 Φ7/φ9/φ11 Φ13/φ15/φ20-40 ~155-40 ~175-40 ~200 Storage : 15 ~35 Applications
Thermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
TSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
INDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
SOFT FERRITE CORE FOR EMI/EMC SUPPRESSION. AVERTEC Co., Ltd.
- 0 - SOFT FERRITE ORE FOR EMI/EM SUPPRESSION RM423, Ilsan Techno Town, 38, Ilsan-ro, Ilsandong-gu, Goyang-si, Gyeonggi-do, 40-722, Korea Tel. (070)4632-5555~6 Fax. (070)4032-5555 http://www.avertec.kr
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
ΘΕΩΡΗΤΙΚΗ ΚΑΙ ΠΕΙΡΑΜΑΤΙΚΗ ΙΕΡΕΥΝΗΣΗ ΤΗΣ ΙΕΡΓΑΣΙΑΣ ΣΚΛΗΡΥΝΣΗΣ ΙΑ ΛΕΙΑΝΣΕΩΣ
ΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΠΟΛΥΤΕΧΝΙΚΗ ΣΧΟΛΗ ΤΜΗΜΑ ΜΗΧΑΝΟΛΟΓΩΝ ΚΑΙ ΑΕΡΟΝΑΥΠΗΓΩΝ ΜΗΧΑΝΙΚΩΝ ΕΡΓΑΣΤΗΡΙΟ ΣΥΣΤΗΜΑΤΩΝ ΠΑΡΑΓΩΓΗΣ ΚΑΙ ΑΥΤΟΜΑΤΙΣΜΟΥ / ΥΝΑΜΙΚΗΣ & ΘΕΩΡΙΑΣ ΜΗΧΑΝΩΝ ΙΕΥΘΥΝΤΗΣ: Καθηγητής Γ. ΧΡΥΣΟΛΟΥΡΗΣ Ι ΑΚΤΟΡΙΚΗ
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
レーザ結晶. Altechna 社. Laser Crystals. Ti:Sapphire crystals. High damage threshold Strong Kerr effect
Ti:Sapphire crystals Features Large gain-bandwidth Very large emission bandwidth Excellent thermal conductivity Short upper-state lifetime (3. μs) High saturation power Relatively high laser cross-sections
Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You
Replacement Guide Wilo Circulators for Heating and Secondary Hot Water Circulation 2013 Pioneering for You Grundfos Single pumps Wilo new High-efficiency pumps infinitely variable, 1~230V, 50Hz Stratos
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
CODE CTE-100 ΕΝΩΤΙΚΟ ΓΙΑ ΤΑΠΕΣ GUTTER SNAP LOCK CODE CTE-110 ΔΙΑΜΟΡΦΩΤΙΚΟ ΑΚΡΩΝ ΥΔΡΟΡΡΟΗΣ DOWNPIPE END CRIMPER TOOL
ΕΡΓΑΛΕΙΑ ΧΕΙΡΟΣ / HAND TOOLS CODE CTE-100 ΕΝΩΤΙΚΟ ΓΙΑ ΤΑΠΕΣ GUTTER SNAP LOCK CODE CTE-110 ΔΙΑΜΟΡΦΩΤΙΚΟ ΑΚΡΩΝ ΥΔΡΟΡΡΟΗΣ DOWNPIPE END CRIMPER TOOL CODE CTE-120 ΜΙΝΙ ΣΤΡΑΝΤΖΑ ΧΕΙΡΟΣ 8cm Πλάτος FORGED STEEL
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
First Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Linear diffuser. Dimensions. Description
Dimensions -- + D -- Description is a rectangular linear diffuser in aluminium. is suitable for both supply and exhaust air. is equipped with air guide baffles, making it possible to use for horizontal
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
TODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Technical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
HFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
COMPOSITE INSULATOR. ANSI Standard Type COMPOSITE LONGE ROD SUSPENSION INSULATOR. PDI 16mm Diameter Rod Deadend Insulators
COMPOSITE LONGE ROD SUSPENSION INSULATOR PDI 16mm Diameter Rod Deadend Insulators Mechanical Characteristics Item of Length Diameter Net Wt. Torsion SML RTL Proof Cat. Sheds (kg) (N-m) (kn) (kn) (kn) 1
Including new chipbreakers: EME, ESE, ESEW
Including new chipbreakers: EME, ESE, ESEW New Generation of Steel Turning Grades Steel Stainless Steel General Features Electric Carbide, Inc. introduces the next generation of P1, P2, and P3 coated carbide
πόρτες κατοικιών residential doors
πόρτες κατοικιών residential doors Για τις κατοικίες προσφέρουμε ιδανικές λύσεις για μοντέρνα ή κλασική διακόσμηση, με πόρτες και αξεσουάρ, προσαρμοσμένα στην αισθητική του χώρου σας. Διατίθενται σε μεγάλη
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Top-Lok The Top-Lok clamping system locks the inserts against both the back and side of the pocket, providing clamping integrity axially and radially.
PARTING AND GROOVING Top-Lok The Top-Lok clamping ytem lock the inert againt both the back and ide of the pocket, providing clamping integrity axially and radially. Preciion ground inert Interchangeable
Characterization Report
Characterization Report RF Coaxial Cable Assemblies Raw Cable Type: Temp-Flex 047-2801 RF047-11SP9-11SP9-0305 Test Date: 10 Dec. 2014 RF047-11RP9-11RP9-0305 Test Date: 13 Oct. 2014 RF047-01SP1-01SP1-0305
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Current Status of PF SAXS beamlines. 07/23/2014 Nobutaka Shimizu
Current Status of PF SAXS beamlines 07/23/2014 Nobutaka Shimizu BL-6A Detector SAXS:PILATUS3 1M WAXD:PILATUS 100K Wavelength 1.5Å (Fix) Camera Length 0.25, 0.5, 1.0, 2.0, 2.5 m +WAXD Chamber:0.75, 1.0,
Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Photomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
FERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS)
FERRITES' NOTES RW MTERIL SPEIFITION (RMS) Property Unit Pratical Frequency Range MHz Initial Permeability urie Temperature Specific Gravity g/cm 3 Loss Factor @ FREQUENY -6 MHz Temp. oef. of Initial Permeability
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement