Industrial Power Transmission Products
|
|
- Λητώ Ζάνος
- 7 χρόνια πριν
- Προβολές:
Transcript
1 World Wide Manufacturing World Classs Qualityy For All Applications Power Ace Power King Power Ace Combo Rib Ace Power Max Power King Cog Power Ace Cog Double V Duraflex GL Synchro-Link Rubber Synchro-Link Polyurethane Synchro-Link High Torque Synchro-Link Double Sided Rubber Synchro-Link Double Sided Polyurethane Metric V-Belts BANDO Industrial Power Transmission Products Power King Industrial Power Transmission Products KPS High Torque Polyurethane DISTRIBUTED BY: BU-200/1-10
2 Reference Information Distribution, Service and Sales V-Belt Products Preview Page Price Page Power Ace (3V, 5V, 8V) Power King (A, B, C, D, E) Power Ace Cog (3VX, 5VX) Power King Cog (AX, BX, CX) Power Ace Combo (3V, 5V, 8V) Power King Combo (B, C, D) Power Ace Aramid Combo V-Belts (8VK) Power Ace Cog Combo (3VX, 5VX) Power Max Variable Speed Rib Ace (J, L, M) Double V (AA, BB, CC) Duraflex GL Cog (2L) Duraflex GL FHP (3L, 4L, 5L) Duraflex VC and DC Ultrapower AG TM KC Belts (A, B) Metric (XPZ/SPZ, XPA/SPA, XPB/SPB, SPC) Banflex (3M, 5M, 7M, 11M) Banflex Combo (5MS, 7MS, 11MS) Synchro-Link Timing Belt Products Synchro-Link Single Sided Timing Belts Synchro-Link STS Timing Belts - Neoprene (Metric) (STS2M, STS3M, STS4.5M, STS5M, STS8M, STS14M) Synchro-Link HPS Timing Belts - Neoprene (Metric) (HPS5M, HPS8M, HPS14M) Synchro-Link KPS II Timing Belts - Polyurethane (Metric) (KPS8M, KPS14M) Synchro-Link HT Timing Belts - Neoprene (Metric) (3M, 5M, 8M, 14M) Synchro-Link Timing Belts - Neoprene (RMA) (MXL, XL, L, H, XH, XXH) Synchro-Link Timing Belts - Polyurethane (RMA) (XL, L) Synchro-Link Timing Belts - Polyurethane (Metric) (T2.5, T5, T10) Synchro-Link Double Sided Timing Belts Synchro-Link Double Sided Timing Belts - Neoprene (RMA) (DXL, DL, DH) Synchro-Link Double Sided Timing Belts - Polyurethane (RMA) (DMXL, DXL) Synchro-Link Double Sided Timing Belts - Polyurethane (Metric) (DT5, DT10) Open Ended Timing Belts Synchro-Link Timing Belt Pulleys STS MPB Timing Belt Pulleys (S8M, S14M) Synchro-Link STS TL Timing Belt Pulleys (S8M, S14M) Synchro-Link HT Timing Belt Pulleys MPB (5M, 8M, 14M) QD (5M, 8M, 14M) Synchro-Link MPB Timing Belt Pulleys (XL, L, H) Synchro-Link QD Timing Belts Pulleys (L, H) Synchro-Link TL Timing Belts Pulleys (L, H) Bushings QD & TL Belt Racks Belt Sleeves Belt Troubleshooting Guide Installation and Maintenance Tools Manufacturers Brand Name Reference Minimum Recommended Pulley Sizes , 116 Minimum Recommended Sheave Diameters , 37, 43 Power King and Power Ace Combo Mandrel Program Preventative Maintenance Product Warranty Rebore, Keyway and Set Screw Alterations Specialty Application Synchro-Link Belts Synchro-Link Belt Handling Synchro-Link Operating Conditions Synchro-Link Sleeve Program Tensioning for Synchro-Link STS, HPS and KPS II Timing Belts Tensioning for Synchro-Link HT Timing Belts Tensioning Information Useful Formulas for V-Belt Drives V-Belt Installation QD is a registered trademark of Emerson Electric. Taper-Lock and TL are registered trademarks of Reliance Electric. Table of Contents 1
3 Reference Information Service Express Place an order, request technical assistance, discuss commercial issues our knowledgeable team of inside sales professionals is prepared to handle your orders, inquiries or special requirements promptly, courteously and efficiently. Service Express hours are 7:00 A.M. through 6:00 P.M. CST. Message Express BANDO s Message Express is your real time communication link to any one of BANDO s field sales representatives, inside sales representatives, product specialists, engineering support personnel or any member of BANDO s management team. If you don t know your party s extension, Message Express will assist you in connecting to the individual with whom you wish to communicate. Web Page Visit our web site at for information on products, purchasing options, What s New at BANDO and to review our privacy statement. Contact us via at: serviceexpress@bandousa. com Looking for the e-dress of a specific individual request that information via (above), Message Express (above) or phone and our receptionist will give you that information. BANDO s proprietary system is your assurance that all belts shown with the designation will match all other belts of the same size and type. eliminates cumbersome, complex and time consuming matching systems, reduces inventory and simplifies order procedures. Application Exclusions For safety reasons, BANDO belts may not be designed into, applied on, or sold as replacements for any of the following applications: Aircraft (propeller or rotor) drive systems or any inflight accessory system drives. Any type of lift system for personnel or product that relies solely on the belt for support without an appropriate fail safe type of backup support system(s). Static Conductivity All BANDO belts labeled "static conductive" will meet the Rubber Manufacturers Association (RMA) requirements for static conductivity. Belts not marked "static conductive" may not meet the Rubber Manufacturers Association (RMA) requirements for static conductivity. For specific applications requiring static conductive belts, consult your BANDO sales representative or BANDO headquarters in Itasca, IL for static conductive certification and installation instructions. Specifications BANDO USA, Inc. reserves the right to modify, improve and/or enhance product design, specifications, dimensions and materials at any time without obligation for replacement or refund on any products or parts thereof which may be in any customers possession at the time such changes become effective. All dimensions shown in this catalog are for reference purposes only and are subject to change without notice. Where space requirements are critical, consult BANDO for certified specifications. The BANDO Product Warranty BANDO USA, Inc. warrants its products against defects in material and workmanship, under normal use and service, for a period of one year from date of shipment. BANDO s obligation under this warranty is limited to repairing or furnishing a similar product without charge. BANDO shall have the option of requiring the return of the defective material, transportation prepaid, to establish the claim. All claims must be made in writing. No allowances will be made for repairs or alterations without BANDO s written consent or approval. BANDO shall not in any event be liable for any special indirect or consequential damage. THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 2
4 Distribution, Service & Sales Stocking Distributors BANDO USA, Inc. markets their products through over 500 stocking distributors located throughout North and South America. These Distributors are serviced and supplied by BANDO distribution centers that are strategically located to provide optimum service levels on a local market basis. Pricing Design Engineering and Application Assistance Assistance in drive design, application or general engineering support is always available through your BANDO distributor, your BANDO sales representative or by contacting BANDO USA, Inc. Whether your request is for a complex drive application or for basic information on any BANDO product, we will be pleased to assist you. All prices in this catalog are list. For actual purchase price, contact your BANDO stocking distributor. All list prices are in USD and are subject to change without notice. BANDO Field Sales Representatives BANDO USA Inc. s team of sales representatives have an average of 20 years field sales experience per man. These are experienced power transmission specialists who work for and with BANDO distributors. For the name and location of the BANDO distributor nearest you, or the name of your BANDO sales representative, contact BANDO via: SERVICE EXPRESS Power Ace Product Preview BANDO's Power Ace narrow profile V-belt transmits power more efficiently and effectively, delivering higher horsepower ratings than classical cross section belts. BANDO's Power Ace should be considered for any new drive application, as they can transmit the same load as classical belts in 1/2 to 2/3 the space. The special bias cut angle of the cover fabric reduces stress as the belt bends around sheaves, lowering heat build up that shortens belt life. Extra strong polyester cords are treated for fatigue, stretch resistance and adhesion to assure the longest possible belt life. The rubber compound of the body is engineered to maintain structural uniformity while maintaining the flexibility to reduce heat build up. Meets RMA standards for oil and heat resistance and static conductivity. Refer to page 17 for size and list price information. 3
5 Product Preview Power King BANDO's continuous improvements in materials, design and manufacturing methods make the Power King classical cross section belt the workhorse of industry. Bias cut, rubber impregnated fabric cover provides superior flexibility and friction resistance. Oil and heat resistant. Ultra high strength polyester cords assure fatigue resistance and length stability while providing the flexibility needed to attain long, trouble-free service. Specially compounded rubber body reduces heat build-up while giving firm support to the cords, maintaining uniform load distribution. Meets RMA standards for oil and heat resistance and static conductivity. Refer to pages 18 through 21 for size and list price information. Product Preview Power Ace Cog and Power King Cog Studies have determined that using BANDO Power King Cog and Power Ace Cog V-belts can save substantial dollars on energy consumption. The precision molded raw edge cogged construction transfers power with much greater efficiency, allowing for smaller sheave sizes and increased power transmission capabilities. The bias cut cover stock provides lateral stability across the width of the belt while allowing axial flexibility. Stability is assured through the use of BANPRENE cushion stock that maintains cord integrity, assuring uniform distribution of load transmission. The fiber loaded cogged construction provides optimum flexibility and minimizes heat build-up. Meets RMA standards for oil and heat resistance and static conductivity. Refer to pages 22 through 24 for size and list price information. 4
6 Power Ace Combo, Power King Combo and Power Ace Aramid Combo To resolve problem applications where belts are flipping over or jumping out of the sheaves, utilize BANDO's series of Combo belts. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Combos utilize the premium quality Power King and Power Ace belts, with all of their features and benefits. Assures equal load distribution in drives where high shock or pulsating loads cause belts to whip, flip over or jump out of the sheave grooves. Combos are ideal for use on vertical shaft drives. Meets RMA standards for oil and heat resistance and static conductivity. Power Ace Aramid Combo belts are constructed with high modulus aramid cords to maintain length stability and to withstand severe shock loads, making them ideally suited for oil, gas, aggregate and lumber industry applications. Refer to pages 25 through 30 for size and list price information. Power Ace Cog Combo Power Ace Cog Combo combines the superior load carrying capacity of the Power Ace Cog belt with the banded construction of BANDO's Combo series to provide an exceptional belt for troublesome applications. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Power Ace Cog Combos utilize the premium quality Power Ace Cog belts, with all of their features and benefits. Provide belt stability in drives where high shock or pulsating loads cause belts to whip, flip over, or jump out of the sheave grooves. Assure equal load distribution. Power Ace Cog Combos are ideal for use on vertical shaft drives. Meets RMA standards for oil and heat resistance and static conductivity. Product Preview Product Preview Refer to page 31 for size and list price information. 5
7 Power Max Because Power Max belts are wide in proportion to their thickness, they must have extreme crosswise rigidity to keep them from dishing in. This dishing would cause the tensile cords to become misaligned, leading to uneven speed control and excessive wear on the cords, causing premature failure. Product Preview Power Max belts provide lengthwise flexibility to bend around small sheave diameters without excess strain that would shorten belt life. Tough polyester cords won't fatigue, even with repeated shock loads. Cords are specially treated to resist stretch and carry high horsepower loads. Transversely aligned fiber reinforcement in the belt cogs assures crosswise rigidity and flexibility to reduce heat build up and minimize cracking. Meets RMA standards for oil and heat resistance and static conductivity. Refer to pages 32 through 35 for size and list price information. Rib Ace BANDO's Rib Ace is an ultra thin, extremely flexible belt with the versatility to handle heavy, high speed industrial applications like machine tools, as well as light duty, slower applications such as exercise equipment. Able to utilize very small sheaves, allowing for speed ratios up to 40 to 1. Smooth, vibration-free performance ideally suited for consumer goods applications like clothes dryers. Rib Ace belts can be used in serpentine drive configurations with small backside idlers, making for compact design. Rib Ace belts improve performance on 1/8 turn, 1/4 turn and mule drives. Refer to pages 36 and 37 for size and list price information. 6
8 Double V Serpentine drives with one or more reverse bends which require power to be transmitted from both sides of the belt can put extra stress on belt components. BANDO's Double V dual-direction flexibility assures long life - as much as 40% more that traditional Double V-belts. Ideally suited to handle tough applications such as agricultural, textile and printing machinery. High strength polyester tensile cords provide superior length stability and fatigue resistance. Cords are bonded together chemically to the body of the belt to prevent separation and to assure long service life. The upper and lower sections of the belt are compounded for extra flexibility to allow the belt to bend easily in both directions. Designed for low heat build up to extend belt life. Meets RMA standards for oil and heat resistance and static conductivity. Refer to pages 38 and 39 for size and list price information. Duraflex GL Cog Duraflex GL combines cogged construction with polyurethane material to provide a belt supremely suited for light duty 2L fractional horsepower drives. Clean room environments, food processing and textile machinery all benefit from the elimination of "black dust" common to conventional FHP belts. Polyurethane construction is ten times more oil resistant than rubber and provides super clean operation. It won't absorb lubricants and swell like rubber belts. Strong polyester tensile cords are placed with extreme accuracy to distribute horsepower loads uniformly for long belt life. Specially treated cords assure no-stretch, no-wobble performance even in high speed, severe shock load applications. Duraflex GL Cog available only in 2L cross section. Product Preview Refer to page 40 for size and list price information. 7
9 Duraflex GL Duraflex GL V-belts are specifically designed for shorter center distance, high speed fractional horsepower drives. Common applications include HVAC equipment and appliances. Oil, heat and ozone resistant bias cut, rubber impregnated fabric cover protects inner components for long life. High strength polyester tensile cords provide maximum fatigue and stretch resistance. The cords are positioned, supported and protected by the insulation section for uniform load distribution. The special rubber compound in the body of the belt is formulated to flex around small sheaves and dissipate heat build up to extend belt life. Meets RMA standards for oil and heat resistance and static conductivity. Product Preview Refer to pages 40 through 42 for size and list price information. Duraflex VC (Cogged) and DC (Double Cog) Duraflex VC and DC are the most precise V-belts available. Because of their superior dimensional stability, Duraflex VC and DC have half the center-to-center distance variation of conventional belts. This stability and exceptionally high coefficient of friction add up to minimal slippage. The polyurethane construction eliminates the black dust problem common in conventional belts. The polyurethane body is more stable, flexible and the non-conductive compound is highly resistant to lubricants with a minimal volume increase. Exclusive BANDO TETRON cords are positioned with exact spacing to insure tensile strength and dimensional stability in high speed shock load applications. Cogged design provides maximum flexibility without sacrificing either strength or performance. Double cog construction allows you to scale down pulley size requirements. Cogs allow efficient operation in pulleys as small as 0.6" OD with virtually no slippage or heat build up. Refer to page 43 for size and list price information. 8
10 Ultrapower AG KC* Ultrapower AG KC is constructed specifically for those drives where a clutching function is essential to successful operation. Compounded to provide maximum durability during the clutching phase of operation, the KC's envelope, aramid fiber tension members and low profile design provide extended service life and superior flexibility to handle idler and reverse bend drive configurations typical of many power equipment applications. BANDO's KC envelope is designed specifically to handle the wear and tear of clutching applications. Bias cut, cross woven fabric is oil and heat resistant. Aramid fiber tensile cords transmit up to 20% more horsepower than traditional polyester construction. High modulus cords placed just above the neutral axis resist elongation, reducing or eliminating retensioning or expensive take-up mechanisms. The body of the KC is formulated to reduce heat buildup for a cooler running, longer lasting belt. The BANPRENE compound balances firmness with flexibility to maintain cross sectional uniformity. *Where clutching is not a requirement, select the Ultrapower AG K construction which has the same internal components as the KC design, only with a rubber impregnated fabric cover. Refer to page 44 and 45 for size and list price information. Metric V-Belts In addition to belts manufactured to RMA (Rubber Manufacturers Association) standards, BANDO produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances and more compact drives. They are direct replacements for belts on imported machinery and on domestic equipment for export. Oil and heat resistant bias cut envelope protects the belt's inner components against dirt, oil and heat. The bias cut BANPRENE impregnated fabric provides lateral stability while permitting axial flexibility for operating around small pulley diameters. High density polyester tension members treated for fatigue and elongation resistance minimize maintenance costs. BANPRENE compression section maintains tension member cross section uniformity while remaining flexible enough to reduce heat build up - one of the primary causes of premature belt failure. Refer to pages 46 through 48 for size and list price information. Product Preview Product Preview 9
11 BanFlex The small cross section of the BanFlex belts makes them the preferred choice where short center distances and small diameter sheaves are required on compact equipment designs. The 60 sidewall angle and precision molded, seamless construction allows for precise belt-tosheave meshing in high speed applications up to 10,000 RPM. Precision cast, seamless polyurethane body for maximum power transmission capability at high speeds. Polyester tensile member is treated to insure length stability and insure superior resistance to fatigue. Polyurethane ribs dissipate heat and assure lateral rigidity while providing longitudinal flexibility. Refer to pages 49 and 50 for size and list price information. Product Preview BanFlex Combo Ideally suited for short center distances and small diameter pulleys, BanFlex Combos' banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation. Treated polyester tensile cords resist fatigue and stretch as well as providing exceptional length stability and drive uniformity. Polyamid tie band prevents belt whip under impulse loads. Polyurethane ribs on the back of the belt provide rigidity across the width of the belt and dissipate heat, leading to longer belt life. Refer to pages 51 through 53 for size and list price information. 10
12 Synchro-Link Timing Belts When synchronization of the driven and driver speed is required, Synchro-Link Timing Belts give unsurpassed efficiency, economy and performance and are available in both inch (RMA) and metric dimensions. BANDO timing belts offer these advantages: Popular Profiles Available in the high torque, low noise STS profile, the widely used HT curvilinear profile and the traditional Trapezoidal profile. Non-Slip, Positive Performance Belt-pulley compatibility and close manufacturing tolerances assure that belt teeth mesh precisely with pulley grooves for constant output speed without skipping, vibration or speed variation. Extremely energy efficient - Studies by the US Department of Energy have found that synchronous belt drives are over 99% energy efficient, leading to lower operating costs. Low Maintenance/Economical Operation Because timing belts do not require re-tensioning and, unlike gears or chain, require no lubrication, they are ideal for applications where maintenance is difficult and downtime is costly. Low Tension Requirements The tooth grip principle of timing belts does not require high tension, so bearing loads are minimized, resulting in longer bearing and motor life. Wide Range of Load Capacities and Speeds Design versatility makes timing belts the right choice for a variety of applications. Speeds can range from 1 to over 10,000 RPM; load carrying capacity can vary from fractional to hundreds of horsepower. Space and Weight Savings Drives are compact because pulleys are small and center distances are short. Per horsepower transmitted, timing belts weigh only a fraction of alternative methods. Clean, Quiet Operation Noise and vibration are kept to a minimum. Clean operation is ideal for contamination sensitive machines. Synchro-Link Super Torque Timing Belts Product Preview Due to its high power transmission capabilities, quiet, smooth running tooth meshing qualities, energy efficiency and reliability, the STS tooth profile is widely recognized by automotive design engineers as the preferred belt for overhead cam applications in most late model cars and trucks. These same qualities make this generation of synchronous belts ideal for today's high performance industrial applications. As the tooth meshes with the pulley groove, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords, resulting in reduced bending fatigue and longer service life. Smooth tooth engagement and direct contact of the belt tooth and the pulley groove enable the belt to run quietly, even at high speeds. 11
13 Synchro-Link STS Timing Belts Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly - even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords, resulting in reduced bending fatigue and longer service life. No lubrication or re-tensioning required. Higher HP transmission capability can decrease the belt and pulley width, reducing the drive space envelope, resulting in a more compact machine design. Product Preview Refer to pages 54 through 65 for size and list price information. High Performance STS Belts Anticipating the demand for energy savings and higher horsepower transmission, BANDO developed our High Performance STS (HPSTS) belt, utilizing our time-proven technology and experience. High durometer oil and heat resistant, static conductive synthetic rubber protects against tooth deformation, minimizing fatigue. Tooth canvas provides a low coefficient of friction, lowering noise levels. This HPSTS belt achieves exceptionally higher power transmission - up to 2 times as high as conventional STS belts. Higher HP transmission minimizes the width of the belt, making system design as compact as possible. The narrower width of the belt and pulleys results in a quieter running drive. Runs in standard stock STS pulleys. HPS5M is only available in clean specification, minimizing rubber dust. Refer to pages 66 through 70 for size and list price information. 12
14 King Power Synchronous Belt (KPS II) Utilizing high modulus aramid cords and the unique blue polyurethane body, the KPS II is the belt of choice for applications requiring exceptional power transmission capabilities, particularly on lower speed-high torque drives. The KPS II belt transmits up to 5 times more power than a standard STS belt. This allows the same power transmission capacity to be achieved using narrower or smaller diameter pulleys, saving space and money. Wear-resistant polyurethane construction reduces rubber dust. Available in 8mm and 14mm pitch. Utilize standard STS pulleys for a wide range of speed ratios. Refer to pages 71 and 72 for size and list price information. Synchro-Link HT Timing Belts Product Preview BANDO's Synchro-Link HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds. The rounded tooth profile meshes precisely with matching pulley grooves so there is no belt creep or slip to cause speed variation. HT belt drives are 99% efficient, leading to significant energy savings on high horsepower applications. HT belts are thin and flexible so they do not generate heat build up, delivering long service life. Continuous, helically-wound S and Z oriented fiberglass cord is the load carrying muscle of the belt, resisting elongation and shock loads while providing excellent strength and service life. Refer to pages 73 through 78 for size and list price information. Product Preview 13
15 Product Preview Product Preview Product Preview Synchro-Link Trapezoidal Timing Belts Neoprene The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture. Continuous, helically-wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads won t fatigue this super strong cord. S and Z orientation of the cords aid in minimizing belt tracking problems. Precision formed, oil and heat resistant neoprene teeth have a shear resistance equal to the tensile strength of the belt (under standard 6 teeth in mesh tests). Tooth design and tight manufacturing tolerances provide full surface contact between belt and pulley for smooth running characteristics. The tooth surface is protected by a low friction, clean running, wear resistant woven nylon facing. Seamless construction eliminates vibration. Refer to pages 79 through 91 for size and list price information. Polyurethane Polyurethane timing belts provide a lightweight drive system, when used with aluminum or plastic pulleys, and exceptionally quiet operation. They are ideal for applications needing high oil and ozone resistance, and their extremely clean operation make them suitable for appliance and office machine use. Metric sizes are often found on imported textile machinery. Body is made from the highest quality polyurethane for maximum oil and ozone resistance. Non-static conductive. Strong tensile cords oriented in an S and Z configuration, which won t stretch or fatigue over the life of the belt, provide high load carrying capacity and superior tooth shear strength under shock load applications. Refer to pages 92 through 97 for size and list price information. 14
16 Synchro-Link Double Sided Timing Belts (Neoprene) Synchro-Link Double Sided Timing Belts provide smooth, precise performance under exacting drive conditions in serpentine drives common in printing, textile and packaging machinery. BANDO's precision molding process assures "mirror-image" symmetry, so both sides of the belt mesh with the pulley properly and provide maximum belt life. Flexible neoprene body resists oil, heat, ozone, grease and moisture for maximum belt life. Strong, helically-wound fiberglass cords won't stretch or fatigue under high horsepower loads. Durable precision formed teeth engage pulley grooves exactly for accurate synchronization from both sides of the belt. Tough nylon fabric on both sides of the belt protects teeth against wear and abrasion. Low coefficient of friction provides smooth running characteristics. Refer to pages 98 through 103 for size and list price information. Synchro-Link Double Sided Timing Belts (Polyurethane) An ideal selection for serpentine drives where extremely clean, quiet operation is required. Precision molded to insure mirror image top and bottom tooth alignment for precise symmetry and synchronization. Top quality oil and ozone resistant polyurethane provides clean running operation and exceptionally long belt life. Strong tensile cords assure length stability and stand up to high horsepower loads. Extremely clean operation makes these belts ideally suited for appliance and office equipment applications. Product Preview Refer to pages 104 through 107 for size and list price information. 15
17 Synchro-Link Timing Belt Pulleys For optimum performance, combine BANDO Synchro-Link Timing Belts and Timing Belt Pulleys. BANDO Synchro-Link Timing Belt Pulleys are manufactured to exacting tolerances to assure total drive system compatibility. They are available in a complete range of sizes, types, configurations and materials to contribute to the efficiency, economy and performance of your drive. Synchro-Link Minimum Plain Bore for trapezoidal, STS and HT profiles Synchro-Link QD construction for trapezoidal and HT profiles Synchro-Link TL construction for trapezoidal and STS profiles Product Preview Refer to pages , 113, and for size and list price information. Refer to pages , and for size and list price information. Refer to pages , and for size and list price information. The type of pulley used on a Synchro-Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i.e. QD, TL or Minimum Plain Bore). An Explanation of Synchro-Link Drive Pitches With Synchro-Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance between tooth centers and is measured on the pitch line of the belt. On the pulley, pitch is the distance between groove centers and is measured on the pulley s pitch curve. The pitch line of a Synchro-Link Drive Belt is located within the tension member. The pitch circle of a Synchro-Link Drive Belt pulley coincides with the pitch line of the belt mating with it. Product Preview Any Synchro-Link Drive Belt must be run with pulleys of the same pitch. A belt of one pitch cannot be used successfully with pulleys of a different pitch. Synchro-Link Drive Pulleys L Circular pitch of groove M Minimum depth of groove, including clearance N Width of groove at minimum depth, including clearance O Pressure angle P Top radius of groove R Pitch diameter (always > S) S Outside diameter Synchro-Link Drive Belts A Pitch of teeth B Depth of teeth C Width of bottom of teeth D Pressure angle E Radius at bottom of teeth F Radius at top of teeth G Pitch line differential Belt P.L. = A x Total no. of teeth in belt 16
18 3V Section Price (Lbs.) Price (Lbs.) Price (Lbs.) Effective Outside 3V V V V V V V V V V V V V V V V V Section Effective Outside 5V V V V V V V V V V V V V V V V V V V Section Effective Outside 8V V V V V V V V V V V V V V V Price (Lbs.) Price (Lbs.) Price (Lbs.) Effective Outside 3V V V V V V V V V V V V V V V V ".32" Nominal Dimensions.62".54" 1.0".88" Effective Outside 5V V V V V V V V V V V V V V V V V Effective Outside 8V V V V V V V V V V V V V V V Power Ace King V-Belts
19 Power King V-Belts.50" A Nominal Dimensions.88".66".31" B.41" C.53" 1.50" 1.25" D.75" E.91" A Section Price (Lbs.) Outside Datum A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Price (Lbs.) Outside Datum A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A For intermediate sizes not shown, consult BANDO for availability and price. 18
20 B Section Price (Lbs.) Outside Datum B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B For intermediate sizes not shown, consult BANDO for availability and price. Price (Lbs.) Outside.66" B.88".41" C.53" Datum B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B Power King V-Belts Power King V-Belts
21 Power King V-Belts B Section (Continued) Outside Datum Price (Lbs.) B B B B B B B B B B B Outside Datum Price (Lbs.) B B B B B B B B B B C Section Price (Lbs.) Outside Datum C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C For intermediate sizes not shown, consult BANDO for availability and price. Price (Lbs.) Outside Datum C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C
Injection Molded Plastic Self-lubricating Bearings
Injection Molded Plastic Self-lubricating Bearings Injection Molded Plastic Self-lubricating Bearings CSB-EPB : Injection molded thermoplastic P-P CSB-EPB Plastic Compound Bearings RoHS Structure CSB-EPB
Διαβάστε περισσότεραInstruction Execution Times
1 C Execution Times InThisAppendix... Introduction DL330 Execution Times DL330P Execution Times DL340 Execution Times C-2 Execution Times Introduction Data Registers This appendix contains several tables
Διαβάστε περισσότεραthe total number of electrons passing through the lamp.
1. A 12 V 36 W lamp is lit to normal brightness using a 12 V car battery of negligible internal resistance. The lamp is switched on for one hour (3600 s). For the time of 1 hour, calculate (i) the energy
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραTechnical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
Διαβάστε περισσότεραTerabyte Technology Ltd
Terabyte Technology Ltd is a Web and Graphic design company in Limassol with dedicated staff who will endeavour to deliver the highest quality of work in our field. We offer a range of services such as
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραPotential Dividers. 46 minutes. 46 marks. Page 1 of 11
Potential Dividers 46 minutes 46 marks Page 1 of 11 Q1. In the circuit shown in the figure below, the battery, of negligible internal resistance, has an emf of 30 V. The pd across the lamp is 6.0 V and
Διαβάστε περισσότερα[1] P Q. Fig. 3.1
1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One
Διαβάστε περισσότεραStrain gauge and rosettes
Strain gauge and rosettes Introduction A strain gauge is a device which is used to measure strain (deformation) on an object subjected to forces. Strain can be measured using various types of devices classified
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότερα(1) Describe the process by which mercury atoms become excited in a fluorescent tube (3)
Q1. (a) A fluorescent tube is filled with mercury vapour at low pressure. In order to emit electromagnetic radiation the mercury atoms must first be excited. (i) What is meant by an excited atom? (1) (ii)
Διαβάστε περισσότεραΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ Ανώτατο Εκπαιδευτικό Ίδρυμα Πειραιά Τεχνολογικού Τομέα. Ξένη Ορολογία. Ενότητα 6: Working Capital
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ Ανώτατο Εκπαιδευτικό Ίδρυμα Πειραιά Τεχνολογικού Τομέα Ξένη Ορολογία Ενότητα 6: Working Capital Ευαγγελία Κουτσογιάννη Τμήμα Λογιστικής & Χρηματοοικονομικής Άδειες Χρήσης Το παρόν εκπαιδευτικό
Διαβάστε περισσότεραHOMEWORK 4 = G. In order to plot the stress versus the stretch we define a normalized stretch:
HOMEWORK 4 Problem a For the fast loading case, we want to derive the relationship between P zz and λ z. We know that the nominal stress is expressed as: P zz = ψ λ z where λ z = λ λ z. Therefore, applying
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραLowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Διαβάστε περισσότεραΓιπλυμαηική Δπγαζία. «Ανθπυποκενηπικόρ ζσεδιαζμόρ γέθςπαρ πλοίος» Φοςζιάνηρ Αθανάζιορ. Δπιβλέπυν Καθηγηηήρ: Νηθφιανο Π. Βεληίθνο
ΔΘΝΙΚΟ ΜΔΣΟΒΙΟ ΠΟΛΤΣΔΥΝΔΙΟ ΥΟΛΗ ΝΑΤΠΗΓΩΝ ΜΗΥΑΝΟΛΟΓΩΝ ΜΗΥΑΝΙΚΩΝ Γιπλυμαηική Δπγαζία «Ανθπυποκενηπικόρ ζσεδιαζμόρ γέθςπαρ πλοίος» Φοςζιάνηρ Αθανάζιορ Δπιβλέπυν Καθηγηηήρ: Νηθφιανο Π. Βεληίθνο Σπιμελήρ Δξεηαζηική
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραApproximation of distance between locations on earth given by latitude and longitude
Approximation of distance between locations on earth given by latitude and longitude Jan Behrens 2012-12-31 In this paper we shall provide a method to approximate distances between two points on earth
Διαβάστε περισσότεραLowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
Διαβάστε περισσότεραDimensional Data - All tolerances (± 0.01) inches. 5.33 x 6.60.21" x.26" (Typ. 2) 11.68 x 12.95.46" x.51" (Typ. 2)
0-700 Volts, 100 Amps Bussmann BH-0 Series Dimensional Data - All tolerances (± 0.25) mm (± 0.01) inches B 54.23 2.135" 71.42 2.812" Catalog Symbol: BH-0 Series Base: Light-weight, high temperature thermoplastic
Διαβάστε περισσότεραΑΚΑ ΗΜΙΑ ΕΜΠΟΡΙΚΟΥ ΝΑΥΤΙΚΟΥ ΜΑΚΕ ΟΝΙΑΣ ΣΧΟΛΗ ΜΗΧΑΝΙΚΩΝ ΠΤΥΧΙΑΚΗ ΕΡΓΑΣΙΑ ΘΕΜΑ : ΧΗΜΙΚΑ ΠΡΟΣΘΕΤΑ ΠΟΥ ΠΡΟΟΡΙΖΟΝΤΑΙ ΓΙΑ ΤΟ ΝΕΡΟ ΤΟΥ ΑΤΜΟΛΕΒΗΤΑ
ΑΚΑ ΗΜΙΑ ΕΜΠΟΡΙΚΟΥ ΝΑΥΤΙΚΟΥ ΜΑΚΕ ΟΝΙΑΣ ΣΧΟΛΗ ΜΗΧΑΝΙΚΩΝ ΠΤΥΧΙΑΚΗ ΕΡΓΑΣΙΑ ΘΕΜΑ : ΧΗΜΙΚΑ ΠΡΟΣΘΕΤΑ ΠΟΥ ΠΡΟΟΡΙΖΟΝΤΑΙ ΓΙΑ ΤΟ ΝΕΡΟ ΤΟΥ ΑΤΜΟΛΕΒΗΤΑ ΣΠΟΥ ΑΣΤΗΣ : ΑΓΟΡΑΣΤΟΣ ΧΡΥΣΟΒΑΛΑΝΤΗΣ ΕΠΙΒΛΕΠΟΥΣΑ ΚΑΘΗΓΗΤΡΙΑ :
Διαβάστε περισσότεραMetglas. High Performance Square Loop Cores Technical Bulletin. Low saturated permeability
manufactured with cobalt-based METGLAS amorphous alloy 2714A allow the design of mag amps that can operate at higher frequencies than previously possible. Their combination of magnetic properties enable
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραApplications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Διαβάστε περισσότεραΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ΕΡΓΑΣΤΗΡΙΟ ΥΨΗΛΩΝ ΤΑΣΕΩΝ
ΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ΕΡΓΑΣΤΗΡΙΟ ΥΨΗΛΩΝ ΤΑΣΕΩΝ Διπλωµατική Εργασία Της Φοιτήτριας του Τµήµατος Ηλεκτρολόγων
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ Ανώτατο Εκπαιδευτικό Ίδρυμα Πειραιά Τεχνολογικού Τομέα. Ξενόγλωσση Τεχνική Ορολογία. Ενότητα: An Introduction to Tribology
ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ Ανώτατο Εκπαιδευτικό Ίδρυμα Πειραιά Τεχνολογικού Τομέα Ξενόγλωσση Τεχνική Ορολογία Ενότητα: An Introduction to Tribology Παναγιώτης Τσατσαρός Τμήμα Μηχανολόγων Μηχανικών ΤΕ Άδειες Χρήσης
Διαβάστε περισσότερα13111203 P.R.O. Tri Sprint Suit
13111203 P.R.O. Tri Sprint Suit The P.R.O. Tri Sprint Suit features our Transfer Repel fabric which is hydrodynamic perfect for short distance races such as sprint or Olympic but can also be worn over
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότερα6.003: Signals and Systems. Modulation
6.003: Signals and Systems Modulation May 6, 200 Communications Systems Signals are not always well matched to the media through which we wish to transmit them. signal audio video internet applications
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότερα5.4 The Poisson Distribution.
The worst thing you can do about a situation is nothing. Sr. O Shea Jackson 5.4 The Poisson Distribution. Description of the Poisson Distribution Discrete probability distribution. The random variable
Διαβάστε περισσότεραVentilated Distribution Transformers
General Purpose Energy efficient dry-type transformers 600 Volt Class, isolation type, single and three phase, 1 through 00. Indoor and outdoor models available. Accessories and Optional Styles trostatic
Διαβάστε περισσότεραSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spherical roller bearings Costs savings through rapid bearing replacement at difficult to access bearing locations Contents Rapid bearing replacement 2 Cost savings 2 Application examples 2 Replacement
Διαβάστε περισσότεραS /5000 BTU/Hr. 1000/1500 Watt
763.576.32 SPEC-168 D763.422.2211 COOLING SEALED ENCLOSURE COOLING AIR CONDITIONERS Sealed Enclosure Cooling Air Conditioners SPECTRACOOL SLIM FIT INDOOR S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt
Διαβάστε περισσότεραThe Simply Typed Lambda Calculus
Type Inference Instead of writing type annotations, can we use an algorithm to infer what the type annotations should be? That depends on the type system. For simple type systems the answer is yes, and
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραGroup 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραAssalamu `alaikum wr. wb.
LUMP SUM Assalamu `alaikum wr. wb. LUMP SUM Wassalamu alaikum wr. wb. Assalamu `alaikum wr. wb. LUMP SUM Wassalamu alaikum wr. wb. LUMP SUM Lump sum lump sum lump sum. lump sum fixed price lump sum lump
Διαβάστε περισσότεραMECHANICAL PROPERTIES OF MATERIALS
MECHANICAL PROPERTIES OF MATERIALS! Simple Tension Test! The Stress-Strain Diagram! Stress-Strain Behavior of Ductile and Brittle Materials! Hooke s Law! Strain Energy! Poisson s Ratio! The Shear Stress-Strain
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραPhys460.nb Solution for the t-dependent Schrodinger s equation How did we find the solution? (not required)
Phys460.nb 81 ψ n (t) is still the (same) eigenstate of H But for tdependent H. The answer is NO. 5.5.5. Solution for the tdependent Schrodinger s equation If we assume that at time t 0, the electron starts
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότερα38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραΕΙΣΑΓΩΓΗ ΣΤΗ ΣΤΑΤΙΣΤΙΚΗ ΑΝΑΛΥΣΗ
ΕΙΣΑΓΩΓΗ ΣΤΗ ΣΤΑΤΙΣΤΙΚΗ ΑΝΑΛΥΣΗ ΕΛΕΝΑ ΦΛΟΚΑ Επίκουρος Καθηγήτρια Τµήµα Φυσικής, Τοµέας Φυσικής Περιβάλλοντος- Μετεωρολογίας ΓΕΝΙΚΟΙ ΟΡΙΣΜΟΙ Πληθυσµός Σύνολο ατόµων ή αντικειµένων στα οποία αναφέρονται
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραRoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραΠώς μπορεί κανείς να έχει έναν διερμηνέα κατά την επίσκεψή του στον Οικογενειακό του Γιατρό στο Ίσλινγκτον Getting an interpreter when you visit your
Πώς μπορεί κανείς να έχει έναν διερμηνέα κατά την επίσκεψή του στον Οικογενειακό του Γιατρό στο Ίσλινγκτον Getting an interpreter when you visit your GP practice in Islington Σε όλα τα Ιατρεία Οικογενειακού
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραRight Rear Door. Let's now finish the door hinge saga with the right rear door
Right Rear Door Let's now finish the door hinge saga with the right rear door You may have been already guessed my steps, so there is not much to describe in detail. Old upper one file:///c /Documents
Διαβάστε περισσότεραEE512: Error Control Coding
EE512: Error Control Coding Solution for Assignment on Finite Fields February 16, 2007 1. (a) Addition and Multiplication tables for GF (5) and GF (7) are shown in Tables 1 and 2. + 0 1 2 3 4 0 0 1 2 3
Διαβάστε περισσότεραSection 9.2 Polar Equations and Graphs
180 Section 9. Polar Equations and Graphs In this section, we will be graphing polar equations on a polar grid. In the first few examples, we will write the polar equation in rectangular form to help identify
Διαβάστε περισσότεραderivation of the Laplacian from rectangular to spherical coordinates
derivation of the Laplacian from rectangular to spherical coordinates swapnizzle 03-03- :5:43 We begin by recognizing the familiar conversion from rectangular to spherical coordinates (note that φ is used
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραCreative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
Διαβάστε περισσότεραStudy of In-vehicle Sound Field Creation by Simultaneous Equation Method
Study of In-vehicle Sound Field Creation by Simultaneous Equation Method Kensaku FUJII Isao WAKABAYASI Tadashi UJINO Shigeki KATO Abstract FUJITSU TEN Limited has developed "TOYOTA remium Sound System"
Διαβάστε περισσότεραCapacitors - Capacitance, Charge and Potential Difference
Capacitors - Capacitance, Charge and Potential Difference Capacitors store electric charge. This ability to store electric charge is known as capacitance. A simple capacitor consists of 2 parallel metal
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραECOL Motors In Aluminum Housing
ECOL Motors In Aluminum Housing FEATURES APPLICATIONS E TBS C TBW B L K AC TBH A AA KK H AD N T E TBS R TBW L AC M 56-160 IM B3 56-160 IM B5 56-160 IM B14 TBH 4-S KK P HD N TBS T E R TBW L AC P M TBH 4-S
Διαβάστε περισσότεραZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
Διαβάστε περισσότεραΕργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων. Εξάμηνο 7 ο
Εργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων Εξάμηνο 7 ο Procedures and Functions Stored procedures and functions are named blocks of code that enable you to group and organize a series of SQL and PL/SQL
Διαβάστε περισσότεραΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ
ΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ιπλωµατική Εργασία του φοιτητή του τµήµατος Ηλεκτρολόγων Μηχανικών και Τεχνολογίας Ηλεκτρονικών
Διαβάστε περισσότεραStresses in a Plane. Mohr s Circle. Cross Section thru Body. MET 210W Mohr s Circle 1. Some parts experience normal stresses in
ME 10W E. Evans Stresses in a Plane Some parts eperience normal stresses in two directions. hese tpes of problems are called Plane Stress or Biaial Stress Cross Section thru Bod z angent and normal to
Διαβάστε περισσότεραUDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Διαβάστε περισσότεραTechnical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL
Technical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL WirkungDerat-TI-en-40 Version 4.0 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραOPTIbELT TECHNICAL MANUAL RUbbER TIMINg belt DRIvEs
OPTIbELT TECHNICAL MANUAL RUbbER TIMINg belt DRIvEs INCL. PULLEYs & bushes TECHNICAL MANUAL Rubber Timing Belt Drives optibelt OMEGA and optibelt ZR timing belts have been developed for the use in high
Διαβάστε περισσότεραCHAPTER 25 SOLVING EQUATIONS BY ITERATIVE METHODS
CHAPTER 5 SOLVING EQUATIONS BY ITERATIVE METHODS EXERCISE 104 Page 8 1. Find the positive root of the equation x + 3x 5 = 0, correct to 3 significant figures, using the method of bisection. Let f(x) =
Διαβάστε περισσότεραMATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Διαβάστε περισσότεραGearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Διαβάστε περισσότεραPipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραΚΥΠΡΙΑΚΗ ΕΤΑΙΡΕΙΑ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ 6/5/2006
Οδηγίες: Να απαντηθούν όλες οι ερωτήσεις. Ολοι οι αριθμοί που αναφέρονται σε όλα τα ερωτήματα είναι μικρότεροι το 1000 εκτός αν ορίζεται διαφορετικά στη διατύπωση του προβλήματος. Διάρκεια: 3,5 ώρες Καλή
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραRANGE OF APPLICATION HYDRO DL. ver sion 1.1 / web:
RANGE OF APPLICATION HYDRO DL ver sion 1.1 / 26-04-2012 Factory Head Office Polykastro Industrial Park 61200 Polykastro, Greece Tel.: +30 23430 20140, 20150 Fax: +30 23430 23701 Athens Office-Showroom
Διαβάστε περισσότεραSection 1: Listening and responding. Presenter: Niki Farfara MGTAV VCE Seminar 7 August 2016
Section 1: Listening and responding Presenter: Niki Farfara MGTAV VCE Seminar 7 August 2016 Section 1: Listening and responding Section 1: Listening and Responding/ Aκουστική εξέταση Στο πρώτο μέρος της
Διαβάστε περισσότερα