Istruzioni per l uso FORNO Sommario. Manual de instrucciones HORNO. Operating Instructions OVEN. Instruções para a utilização FORNO

Μέγεθος: px
Εμφάνιση ξεκινά από τη σελίδα:

Download "Istruzioni per l uso FORNO Sommario. Manual de instrucciones HORNO. Operating Instructions OVEN. Instruções para a utilização FORNO"

Transcript

1 FK 6 X/HA S Italiano Istruzioni per l uso FORNO Sommario Istruzioni per l uso, Avvertenze, Assistenza, Descrizione dell apparecchio,7 Descrizione dell apparecchio,9 Installazione,0 Avvio e utilizzo, Il programmmatore di cottura elettronico, Programmi, Precauzioni e consigli, Manutenzione e cura,6 Español Manual de instrucciones HORNO Manual de instrucciones, Advertencias, Asistencia,6 Descripción del aparato,8 Descripción del aparato,9 Instalación, Puesta en funcionamiento y uso, El programador electrónico, Programas, Precauciones y consejos,6 Mantenimiento y cuidados,7 Sumario English Operating Instructions OVEN Operating Instructions, Warnings, Assistance, Description of the appliance,7 Description of the appliance,9 Installation,7 Startup and use,9 The electronic programmer,9 Modes,0 Precautions and tips, Maintenance and care, Contents Portuges Instruções para a utilização FORNO Instruções para a utilização, Advertências, Assistência,6 Descrição do aparelho,8 Descrição do aparelho,9 Instalação,8 Início e utilização,0 O programador electrónico,0 Programas, Precauções e conselhos, Manutenção e cuidados, Índice Français Mode d emploi FOUR Mode d emploi, Avertissements, Assistance, Description de l appareil,7 Description de l appareil,9 Installation, Mise en marche et utilisation,6 Le programmateur électronique,6 Programmes,7 Précautions et conseils,9 Nettoyage et entretien,0 Sommaire Ελληνικά Οδηγίες χρήσης ΦΟΎΡΝΟΣ Περιεχόμενα Οδηγίες χρήσης, Προειδοποίηση, Τεχνική υποστήριξη,6 Περιγραφή της συσκευής,8 Περιγραφή της συσκευής,9 Εγκατάσταση, Εκκίνηση και χρήση,7 Ο ηλεκτρονικός προγραμματιστής,7 ΠΡΟΓΡΑΜΜΑΤΑ,8 Προφυλάξεις και συμβουλές,0 Συντήρηση και φροντίδα,

2 Avvertenze ATTENZIONE: Questo apparecchio e le sue parti accessibili diventano molto caldi durante l uso. Bisogna fare attenzione ed evitare di toccare gli elementi riscaldanti. Tenere lontani i bambini inferiori agli 8 anni se non continuamente sorvegliati. Il presente apparecchio può essere utilizzato dai bambini a partire dagli 8 anni e da persone con ridotte capacità fisiche, sensoriali o mentali oppure con mancanza di esperienza e di conoscenza se si trovano sotto adeguata sorveglianza oppure se sono stati istruiti circa l uso dell apparecchio in modo sicuro e se si rendono conto dei pericoli correlati. I bambini non devono giocare con l apparecchio. Le operazioni di pulizia e di manutenzione non devono essere effettuate dai bambini senza sorveglianza. Non utilizzare prodotti abrasivi né spatole di metallo taglienti per pulire lo sportello in vetro del forno in quanto potrebbero graffiare la superficie, provocando, così, la frantumazione del vetro. Non utilizzare mai pulitori a vapore o ad alta pressione per la pulizia dell apparecchio. ATTENZIONE: Assicurarsi che l apparecchio sia spento prima di sostituire la lampada per evitare la possibilità di scosse elettriche.! Quando si inserisce la griglia assicurarsi che il fermo sia rivolto verso l alto e nella parte posteriore della cavità. Warnings WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Never use steam cleaners or pressure cleaners on the appliance. WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.! When you place the rack inside, make sure that the stop is directed upwards and in the back of the cavity.

3 Avertissements ATTENTION : Cet appareil ainsi que ses parties accessibles deviennent très chauds pendant leur fonctionnement. Il faut faire attention à ne pas toucher les éléments chauffants. Ne pas faire approcher les enfants de moins de 8 ans à moins qu ils ne soient sous surveillance constante. Le présent appareil peut être utilisé par des enfants de plus de 8 ans et par des personnes présentant des capacités physiques, sensorielles ou mentales réduites ou n ayant pas l expérience ou les connaissances indispensables, à condition qu ils soient sous bonne surveillance ou qu ils aient reçu les instructions nécessaires pour une utilisation de l appareil en toute sécurité et à condition qu ils se rendent compte des dangers encourus. Les enfants ne doivent pas jouer avec l appareil. Les opérations de nettoyage et d entretien ne doivent pas être effectuées par des enfants non surveillés. Ne pas utiliser de produits abrasifs ni de spatules métalliques coupantes pour nettoyer la porte du four en verre, sous peine d érafler la surface et de briser le verre. Ne jamais nettoyer l appareil avec des nettoyeurs vapeur ou haute pression. ATTENTION : s assurer que l appareil est éteint avant de procéder au remplacement de l ampoule, afin d éviter tout risque d électrocution.! Lors de l introduction de la grille, s assurer que l arrêt est bien tourné vers le haut et se trouve dans la partie arrière de l enceinte. Advertencias ATENCIÓN: Este aparato y sus partes accesibles se vuelven muy calientes durante el uso. Por lo tanto, es importante evitar tocar los elementos calentadores. Mantenga alejados a los niños menores de 8 años si no son continuamente vigilados. El presente aparato puede ser utilizado por niños mayores de 8 años y por personas con capacidades físicas, sensoriales o mentales disminuidas o sin experiencia ni conocimientos, si se encuentran bajo una adecuada vigilancia o si han sido instruidos sobre el uso del aparato de modo seguro y comprenden los peligros relacionados con el mismo. Los niños no deben jugar con el aparato. Las operaciones de limpieza y de mantenimiento no deben ser realizadas por niños sin vigilancia. No utilice productos abrasivos ni espátulas de metal cortantes para limpiar la puerta de cristal del horno ya que podrían rayar la superficie y quebrar el cristal. No utilice nunca limpiadores a vapor o de alta presión para la limpieza del aparato. ATENCIÓN: Antes de sustituir la lámpara controle que el aparato esté apagado para evitar la posibilidad de choques eléctricos.! Cuando introduzca la parrilla, controle que el tope esté dirigido hacia arriba y en la parte posterior de la cavidad.

4 Advertências ATENÇÃO: Este aparelho e as suas partes acessíveis aquecem muito durante a utilização. É preciso ter atenção e evitar tocar os elementos que aquecem. Manter afastadas as crianças com menos de 8 anos, caso não estejam a ser vigiadas. O presente aparelho pode ser utilizado por crianças com mais de 8 anos e por pessoas com capacidades físicas, sensoriais ou mentais reduzidas ou com pouca experiência e conhecimentos, caso sejam adequadamente vigiadas ou caso tenham recebido instruções em relação ao uso do aparelho de forma segura e tenham conhecimento dos perigos associados. As crianças não devem brincar com o aparelho. As operações de limpeza e manutenção não devem ser efectuadas por crianças sem vigilância. Não utilizar produtos abrasivos nem espátulas de metal cortantes para limpar a porta em vidro do forno, uma vez que pode riscar a superfície, provocando a ruptura do vidro. Nunca utilize equipamento de limpeza a vapor ou de alta pressão para limpar o aparelho. ATENÇÃO: Assegurese de que o aparelho esteja desligado antes de substituir a lâmpada, para evitar a possibilidade de choques eléctricos.! Quando inserir a grelha, assegurese de que o bloqueio esteja voltado para cima e na parte posterior da cavidade. Προειδοποίηση ΠΡΟΣΟΧΉ: Η συσκευή αυτή και τα προσβάσιμα μέρη της καθίστανται πολύ θερμά κατά τη χρήση. Θα πρέπει να προσέχετε και να αποφεύγετε να αγγίζετε τα θερμαντικά στοιχεία. Κρατάτε μακριά τα παιδιά ηλικίας μικρότερης των 8 ετών ή να τα επιτηρείτε συνεχώς. Η παρούσα συσκευή μπορεί να χρησιμοποιηθεί από παιδιά μεγαλύτερα των 8 ετών και από άτομα με μειωμένες φυσικές, αισθητηριακές ή νοητικές ικανότητες ή χωρίς εμπειρία και γνώση αν βρίσκονται υπό κατάλληλη επιτήρηση ή αν έχουν εκπαιδευτεί στη χρήση της συσκευής με τρόπο ασφαλή και αν αντιλαμβάνονται τους σχετικούς κινδύνους. Τα παιδιά δεν πρέπει να παίζουν με τη συσκευή. Οι ενέργειες καθαρισμού και συντήρησης δεν πρέπει να διενεργούνται από τα παιδιά χωρίς επιτήρηση. Μη χρησιμοποιείτε προϊόντα αποξυστικά κι ούτε σπάτουλες μεταλλικές κοφτερές για να καθαρίσετε τη γυάλινη πόρτα του φούρνου επειδή μπορεί να προξενηθούν ξυσίματα στην επιφάνεια, προκαλώντας, έτσι, τη θραύση του γυαλιού. Μη χρησιμοποιείτε ποτέ ατμοκαθαριστές ή μηχανήματα καθαρισμού σε υψηλή πίεση για τον καθαρισμό της συσκευής. ΠΡΟΣΟΧΉ: Βεβαιωθείτε ότι η συσκευή είναι σβηστή πριν αντικαταστήστε τη λυχνία για να αποφευχθεί ενδεχόμενο ηλεκτροπληξίας.! Όταν εισάγεται το πλέγμα βεβαιωθείτε ότι το στοπ είναι στραμμένο προς τα πάνω και στο πίσω μέρος της κοιλότητας.

5 Assistenza! Non ricorrere mai a tecnici non autorizzati. Comunicare: Il tipo di anomalia; Il modello della macchina (Mod.) Il numero di serie (S/N) Queste ultime informazioni si trovano sulla targhetta caratteristiche posta sull apparecchio Assistance! Never use the services of an unauthorised technician. Please have the following information to hand: The type of problem encountered. The appliance model (Mod.). The serial number (S/N). The latter two pieces of information can be found on the data plate located on the appliance. Assistenza Attiva 7 giorni su 7 Se nasce il bisogno di assistenza o manutenzione basta chiamare il Numero Unico Nazionale * per essere messi subito in contatto con il Centro Assistenza Tecnica più vicino al luogo da cui si chiama. È attivo 7 giorni su 7, sabato e domenica compresi, e non lascia mai inascoltata una richiesta. Assistance! Ne jamais faire appel à des techniciens non agréés. Indiquer : le type d anomalie; le modèle de l appareil (Mod.); son numéro de série (S/N). Ces informations figurent sur la plaque signalétique apposée sur l appareil Estensione di garanzia Airbag Airbag è il servizio esclusivo creato da Ariston che integra e prolunga nel tempo i contenuti della garanzia standard: con una modica cifra protegge il cliente da ogni imprevisto riguardante l assistenza e la manutenzione dell elettrodomestico. Per i anni successivi alla data di acquisto il cliente che aderisce al programma Airbag avrà diritto gratuitamente a: l intervento entro 8 ore dalla chiamata; il contributo per spese di trasferta del Tecnico (diritto di chiamata); la manodopera; le parti di ricambio originali; il trasporto dell elettrodomestico non riparabile in loco. Inoltre, qualora l elettrodomestico non sia riparabile la garanzia prevede la sostituzione a prezzo agevolato in funzione dell anzianità del prodotto. * Al costo di, centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 08:00 alle 8:0, il Sab. dalle 08:00 alle :00 e di,8 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 8:0 alle 08:00, il Sab. dalle :00 alle 08:00 e i giorni festivi, per chi chiama dal telefono fisso. Per chi chiama da radiomobile le tariffe sono legate al piano tariffario dell operatore telefonico utilizzato. Le suddette tariffe potrebbero essere soggette a variazione da parte dell operatore telefonico; per maggiori informazioni consultare il sito www. indesit.com.

6 Asistencia! Nunca solicite la asistencia de técnicos no autorizados. Comunique: El tipo de anomalía; El modelo del aparato (Mod.) El número de serie (S/N) Esta información se encuentra en la placa de características colocada en el aparato. Τεχνική υποστήριξη! Μην προσφεύγετε ποτέ σε τεχνικούς μη εξουσιοδοτημένους. Γνωστοποιήστε: Τον τύπο της ανωμαλίας Το μοντέλο της μηχανής (Mod.) Τον αριθμό σειράς (S/N) Αυτές οι τελευταίες πληροφορίες βρίσκονται στην ταμπελίτσα χαρακτηριστικών που βρίσκεται στη συσκευή La siguiente información es válida solo para España. Para otros países de habla hispana consulte a su vendedor. Ampliación de garantía Llame al y le informaremos sobre el fantástico plan de ampliación de garantía hasta años. Consiga una cobertura total adicional de Piezas y componentes Mano de obra de los técnicos Desplazamiento a su domicilio de los técnicos Y NO PAGUE AVERIAS NUNCA MAS Servicio de asistencia técnica (SAT) Llame al 90.. y nuestros técnicos intervendrán con rapidez y eficacia, devolviendo el electrodoméstico a sus condiciones óptimas de funcionamiento. En el SAT encontrará recambios, accesorios y productos específicos para la limpieza y mantenimiento de su electrodoméstico a precios competitivos. ESTAMOS A SU SERVICIO Assistência! Nunca recorra a técnicos não autorizados. Comunique: o tipo de avaria; o modelo da máquina (Mod.) o número de série (S/N). Estas últimas informações encontramse na placa de identificação situada no aparelho. 6

7 Descrizione dell apparecchio Vista d insieme POSIZIONE POSIZIONE POSIZIONE POSIZIONE POSIZIONE 6 GUIDE di scorrimento dei ripiani 7 Ripiano LECCARDA 8 Ripiano GRIGLIA 9 Pannello di controllo Description of the appliance Overall view POSITION POSITION POSITION POSITION POSITION 6 GUIDES for the sliding racks 7 DRIPPING PAN 8 GRILL 9 Control panel Description de l appareil Vue d ensemble 9 6 NIVEAU NIVEAU NIVEAU NIVEAU NIVEAU 6 GLISSIERES de coulissement 7 Support LECHEFRITE 8 Support GRILLE 9 Tableau de bord 8 7 7

8 Descripción del aparato Vista en conjunto POSICIÓN POSICIÓN POSICIÓN POSICIÓN POSICIÓN 6 GUÍAS de deslizamiento de las bandejas 7 Bandeja GRASERA 8 Bandeja PARRILLA 9 Panel de control Descrição do aparelho Vista de conjunto POSIÇÃO POSIÇÃO POSIÇÃO POSIÇÃO POSIÇÃO 6 GUIAS de escorrimento das prateleiras 7 Prateleira BANDEJA PINGADEIRA 8 Prateleira GRADE 9 Painel de comandos Περιγραφή της συσκευής Συνολική άποψη 9 6 ΘΈΣΗ ΘΈΣΗ ΘΈΣΗ ΘΈΣΗ ΘΈΣΗ 6 ΟΔΗΓΟΙ ολίσθησης των επιπέδων 7 Επίπεδο ΛΙΠΟΣΥΛΛΈΚΤΗ 8 Επίπεδο ΓΚΡΙΛ 9 Πίνακας ελέγχου 8 7 8

9 Descrizione dell apparecchio Pannello di controllo Manopola PROGRAMMI Spia TERMOSTATO Manopola TERMOSTATO Programmatore ELETTRONICO Descrição do aparelho Painel de comandos Selector PROGRAMAS Indicador luminoso do TERMOSTATO Selector do TERMOSTATO Programador ELECTRÓNICO Description of the appliance Control panel SELECTOR knob THERMOSTAT indicator light THERMOSTAT knob ELECTRONIC programmer Περιγραφή της συσκευής Πίνακας ελέγχου Επιλογέας ΠΡΟΓΡΑΜΜΑΤΩΝ Ενδεικτικό φωτάκι ΘΕΡΜΟΣΤΑΤΗ Επιλογέας ΘΕΡΜΟΣΤΑΤΗ ΗΛΕΚΤΡΟΝΙΚΟΣ Προγραμματιστής* Description de l appareil Tableau de bord Bouton PROGRAMMES Voyant THERMOSTAT Bouton THERMOSTAT Programmateur ELECTRONIQUE Descripción del aparato Panel de control Mando de PROGRAMAS Piloto TERMOSTATO Mando del TERMOSTATO Programador ELECTRÓNICO 9

10 IT Installazione! È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme all apparecchio per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti.! Leggere attentamente le istruzioni: ci sono importanti informazioni sull installazione, sull uso e sulla sicurezza. Posizionamento! Gli imballaggi non sono giocattoli per bambini e vanno eliminati secondo le norme per la raccolta differenziata (vedi Precauzioni e consigli).! L installazione va effettuata secondo queste istruzioni e da personale professionalmente qualificato. Una errata installazione può causare danni a persone, animali o cose. Incasso Per garantire un buon funzionamento dell apparecchio è necessario che il mobile abbia le caratteristiche adatte: i pannelli adiacenti il forno devono essere di materiale resistente al calore; nel caso di mobili in legno impiallacciato, le colle devono essere resistenti alla temperatura di 00 C; per l incasso del forno, sia nel caso di inserimento sottotavolo (vedi figura) che a colonna, il mobile deve avere le seguenti dimensioni: Centraggio e fissaggio Per fissare l apparecchio al mobile: aprire la porta del forno; togliere i gommini che coprono i fori di fissaggio posti sulla cornice perimetrale; fissare il forno al mobile utilizzando viti a legno; riposizionare i gommini coprifori.! Tutte le parti che assicurano la protezione debbono essere fissate in modo tale da non poter essere tolte senza l aiuto di qualche utensile. Collegamento elettrico I forni dotati di cavo di alimentazione tripolare, sono predisposti per il funzionamento con corrente alternata alla tensione e frequenza di alimentazione indicate nella targhetta caratteristiche posta sull apparecchio (vedi sotto). Montaggio del cavo di alimentazione 90 mm. 0 mm. 70 mm. 0 mm. min. mm. 60 mm. 78 mm.. Aprire la morsettiera facendo leva con un cacciavite sulle linguette laterali del coperchio: tirare e aprire il coperchio (vedi figura). 9 mm. 0 mm. 0, mm., mm.*! Una volta incassato l apparecchio non debbono essere possibili contatti con le parti elettriche.le dichiarazioni di consumo indicate in targhetta caratteristiche sono state misurate con questo tipo di installazione. Aerazione Per garantire una buona aerazione è necessario eliminare la parete posteriore del vano. È preferibile installare il forno in modo che appoggi su due listelli in legno oppure su un piano continuo che abbia un apertura di almeno x 60 mm (vedi figure). 60 mm. mm. N L L N. Mettere in opera il cavo di alimentazione: svitare la vite del serracavo e le tre viti dei contatti LN e poi fissare i cavetti sotto le teste delle viti rispettando i colori Blu (N) Marrone (L) GialloVerde (vedi figura).. Fissare il cavo nell apposito fermacavo.. Chiudere il coperchio della morsettiera. Allacciamento del cavo di alimentazione alla rete Montare sul cavo una spina normalizzata per il carico indicato nella targhetta caratteristiche (vedi a fianco). In caso di collegamento diretto alla rete è necessario interporre tra l apparecchio e la rete un interruttore onnipolare con apertura minima fra i contatti di mm dimensionato al carico e rispondente alle norme in vigore (il filo di terra non deve essere interrotto dall interruttore). Il cavo di alimentazione deve essere posizionato in modo tale che in nessun punto superi di 0 C la temperatura ambiente (per esempio lo schienale del forno). 0

11 ! L installatore è responsabile del corretto collegamento elettrico e dell osservanza delle norme di sicurezza. Prima di effettuare l allacciamento accertarsi che: la presa abbia la messa a terra e sia a norma di legge; la presa sia in grado di sopportare il carico massimo di potenza della macchina, indicato nella targhetta caratteristiche (vedi sotto); la tensione di alimentazione sia compresa nei valori nella targhetta caratteristiche (vedi sotto); la presa sia compatibile con la spina dell apparecchio. In caso contrario sostituire la presa o la spina; non usare prolunghe e multiple.! Ad apparecchio installato, il cavo elettrico e la presa della corrente devono essere facilmente raggiungibili.! Il cavo non deve subire piegature o compressioni.! Il cavo deve essere controllato periodicamente e sostituito solo da tecnici autorizzati (vedi Assistenza).! L azienda declina ogni responsabilità qualora queste norme non vengano rispettate. TARGHETTA CARATTERISTICHE Dimensioni* Volume* lt. 9 Dimensioni** Volume** lt. 6 Collegamenti elettrici ENERGY LABEL larghezza cm, altezza cm, profondità cm, larghezza cm, altezza cm, profondità cm, * Solo per modelli con guide imbutite. ** Solo per modelli con guide in filo. tensione a 00V~ 0/60Hz (vedi targhetta caratteristiche) potenza massima assorbita 800W Direttiva /0/CE sull etichetta dei forni elettrici. Norma EN 00 Consumo energia convezione Naturale funzione di riscaldamento: Tradizionale; Consumo energia dichiarazione Classe convezione Forzata funzione di riscaldamento: Pasticceria. Questa apparecchiatura è conforme alle seguenti Direttive Comunitarie: 6/9/CEE del //06 (Bassa Tensione) e successive modificazioni /08/CEE del//0 (Compatibilità Elettromagnetica) e successive modificazioni 9/68/CEE del /07/9 e successive modificazioni. 0/9/CEE e successive modificazioni. 7/8 standby/off mode IT

12 IT Avvio e utilizzo ATTENZIONE! Il forno è dotato di un sistema di arresto griglie che consente di estrarle senza che queste fuoriescano dal forno. () Per estrarre completamente le griglie è sufficiente, come indicato sul disegno, alzarle, prendendole dalla parte anteriore e tirarle. ()! Alla prima accensione fare funzionare il forno a vuoto per almeno un ora con il termostato al massimo e a porta chiusa. Poi spegnere, aprire la porta del forno e aerare il locale. L odore che si avverte è dovuto all evaporazione delle sostanze usate per proteggere il forno. Alcuni modelli sono dotati di un sistema di cerniere che permette alla porta di chiudersi lentamente senza che sia richiesto di accompagnarne la corsa con la mano. Per un corretto utilizzo, prima di chiudere: aprire completamente la porta. evitare di forzare la chiusura manualmente. Avviare il forno. Selezionare il programma di cottura desiderato ruotando la manopola PROGRAMMI.. Scegliere la temperatura ruotando la manopola TERMOSTATO. Una lista con le cotture e le relative temperature consigliate è consultabile nella Tabella cottura (vedi Programmi).. La spia TERMOSTATO accesa indica la fase di riscaldamento fino alla temperatura impostata.. Durante la cottura è sempre possibile: modificare il programma di cottura agendo sulla manopola PROGRAMMI; modificare la temperatura agendo sulla manopola TERMOSTATO; interrompere la cottura riportando la manopola PROGRAMMI in posizione 0.! Non appoggiare mai oggetti sul fondo del forno perché si rischiano danni allo smalto.! Porre sempre i recipienti di cottura sulla griglia in dotazione. Ventilazione di raffreddamento Per ottenere una riduzione delle temperature esterne, una ventola di raffreddamento genera un getto d aria che esce tra il pannello di controllo, porta del forno ed anche nella parte inferiore della porta forno.! A fine cottura la ventola rimane attiva finché il forno non è sufficientemente freddo. Luce del forno Si accende selezionando con la manopola PROGRAMMI. Rimane accesa quando si seleziona un programma di cottura. Il programmmatore di cottura elettronico Icona FINE COTTURA Icona DURATA Tasto DIMINUZIONE TEMPI DISPLAY Tasto IMPOSTAZIONE TEMPI Icona OROLOGIO Icona CONTAMINUTI Tasto AUMENTO TEMPI Impostare l orologio! Si può impostare sia quando il forno è spento che quando è acceso, ma non si è programmata la fine di una cottura. Dopo l allacciamento alla rete elettrica o dopo un blackout, l icona quattro digit numerici sul DISPLAY lampeggiano.. Premere più volte il tasto finchè non lampeggiano l icona e i quattro digit numerici sul DISPLAY;. con i tasti e regolare l ora; se si tengono premuti, i numeri scorrono più velocemente per facilitare l impostazione.. attendere 0 sec oppure premere nuovamente il tasto per fissare l impostazione. Impostare il contaminuti! Questa funzione non interrompe la cottura e prescinde dall utilizzo del forno; permette solo di azionare il segnale acustico allo scadere dei minuti impostati.. Premere più volte il tasto finchè non lampeggiano l icona e i tre digit numerici sul DISPLAY;. con i tasti e regolare il tempo desiderato; se si tengono premuti, i numeri scorrono più velocemente per facilitare l impostazione.. attendere 0 sec oppure premere nuovamente il tasto per fissare l impostazione. Seguirà la visualizzazione del conto alla rovescia al termine del quale si azionerà il segnale acustico. Programmare la cottura! La programmazione è possibile solo dopo aver selezionato un programma di cottura. Programmare la durata di cottura. Premere più volte il tasto finchè non lampeggiano l icona e i tre digit numerici sul DISPLAY;. con i tasti e regolare la durata desiderata; se si tengono premuti, i numeri scorrono più velocemente per facilitare l impostazione.. attendere 0 sec oppure premere nuovamente il tasto per fissare l impostazione.. a tempo scaduto, sul DISPLAY compare la scritta END, il forno termina la cottura e viene emesso un segnale acustico. Esempio: sono le 9:00 e viene programmata una durata di ora e minuti. Il programma si arresta automaticamente alle 0:. e i

13 Programmare la fine di una cottura! La programmazione della fine di una cottura è possibile solo dopo aver impostato una durata di cottura.. Seguire la procedura da a descritta per la durata;. poi premere il tasto finchè non lampeggiano l icona e i quattro digit numerici sul DISPLAY;. con i tasti e regolare l ora di fine cottura desiderata; se si tengono premuti i numeri, scorrono più velocemente per facilitare l impostazione.. attendere 0 sec oppure premere nuovamente il tasto per fissare l impostazione.. a tempo scaduto, sul DISPLAY compare la scritta END, il forno termina la cottura e viene emesso un segnale acustico. Le icone e accese segnalano che è stata effettuata una programmazione. Sul DISPLAY vengono visualizzate alternativamente l ora di fine cottura e la durata. Annulare una programmazione Per annullare una programmazione: premere il tasto finchè non lampeggia l icona dell impostazione da annullare e i digit sul display. Premere il tasto finchè sul display non compaiono le cifre 00:00. premere contemporaneamente i tasti e ; in questo modo si annullano tutte le programmazioni effettuate contaminuti compreso. Programmi Programmi di cottura! Per tutti i programmi è impostabile una temperatura tra 60 C e, tranne: GRILL (si consiglia di impostare solo su ); GRATIN (si consiglia di non superare la temperatura di C). Programma FORNO TRADIZIONALE Si attivano i due elementi riscaldanti inferiore e superiore. Con questa cottura tradizionale è meglio utilizzare un solo ripiano: con più ripiani si ha una cattiva distribuzione della temperatura. Programma MULTICOTTURA Si attivano tutti gli elementi riscaldanti (superiore, inferiore e circolare) ed entra in funzione la ventola. Poiché il calore è costante in tutto il forno, l aria cuoce e rosola il cibo in modo uniforme. È possibile utilizzare fino a un massimo di due ripiani contemporaneamente. Programma GRATIN Si attiva l elemento riscaldante superiore ed entrano in funzione la ventola e il girarrosto (ove presente). Unisce all irradiazione termica unidirezionale, la circolazione forzata dell aria all interno del forno. Ciò impedisce la bruciatura superficiale degli alimenti aumentando il potere di penetrazione del calore. Effettuare le cotture con la porta del forno chiusa. Programma FORNO PASTICCERIA Si attiva l elemento riscaldante posteriore ed entra in funzione la ventola, garantendo un calore delicato e uniforme all interno del forno. Questo programma è indicato per la cottura dei cibi delicati (ad es. dolci che necessitano di lievitazione) e preparazioni mignon su tre ripiani contemporaneamente. Consigli pratici di cottura! Nelle cotture ventilate non utilizzare le posizioni dei ripiani e : sono investite direttamente dall aria calda, che potrebbe provocare bruciature sui cibi delicati.! Nelle cotture GRILL e GRATIN, disporre la leccarda in posizione per raccogliere i residui di cottura (sughi e/o grassi). MULTICOTTURA Utilizzare le posizioni dei ripiani e, mettendo alla i cibi che richiedono maggior calore. Disporre la leccarda in basso e la griglia in alto. GRILL Inserire la griglia in posizione o, disponendo gli alimenti al centro della griglia. Si consiglia di impostare il livello di energia al massimo. Non allarmarsi se la resistenza superiore non resta costantemente accesa: il suo funzionamento è controllato da un termostato. FORNO PIZZA Utilizzare una teglia in alluminio leggero, appoggiandola sulla griglia in dotazione. Con la leccarda si allungano i tempi di cottura e difficilmente si ottiene una pizza croccante. Nel caso di pizze molto farcite è consigliabile inserire la mozzarella a metà cottura. IT Programma FORNO PIZZA Si attivano gli elementi riscaldanti inferiore e circolare ed entra in funzione la ventola. Questa combinazione consente un rapido riscaldamento del forno, con un forte apporto di calore in prevalenza dal basso. Nel caso si utilizzi più di un ripiano alla volta, è necessario cambiarli di posizione tra loro a metà cottura. Programma GRILL Si attiva l elemento riscaldante superiore ed entra in funzione il girarrosto (ove presente). La temperatura elevata e diretta del grill è consigliata per gli alimenti che necessitano di un alta temperatura superficiale. Effettuare le cotture con la porta del forno chiusa.

14 IT Tabella cottura Programmi Tradizionale Multicottura Alimenti Anatra Arrosto di vitello o manzo Arrosto di maiale Biscotti (di frolla) Crostate Pizza (su ripiani) Lasagne Agnello Pollo arrosto + patate Sgombro Plumcake Bignè (su ripiani) Biscotti(su ripiani) Pan di spagna (su ripiano) Pan di spagna (su ripiani) Torte salate Peso (Kg) Posizione dei ripiani e e e e e Preriscaldamento (minuti) Temperatura consigliata Durata cottura (minuti) Pizza Pizza Focacce o 0 0 Grill Gratin Pasticceria Sogliole Spiedini di calamari e gamberi Filetto di merluzzo Verdure alla griglia Bistecca di vitello Cotolette Hamburger Sgombri Toast Con girarrosto (ove presente) Vitello allo spiedo Pollo allo spiedo Agnello allo spiedo Pollo alla griglia Seppie Con girarrosto (ove presente) Vitello allo spiedo Agnello allo spiedo Pollo (allo spiedo) + patate (sulla leccarda) Crostate Torta di frutta Plumcake Pan di spagna Crêpes farcite (su ripiani) Cake piccoli (su ripiani) Salatini di sfoglia al formaggio (su ripiani) Bignè (su ripiani) Biscotti (su ripiani) Meringhe (su ripiani) n o o e e e e e e e e e! I tempi di cottura sono indicativi e possono essere modificati in base ai proprio gusti personali % 00% 00%

15 Precauzioni e consigli! L apparecchio è stato progettato e costruito in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Sicurezza generale L apparecchio è stato concepito per un uso di tipo non professionale all interno dell abitazione. L apparecchio non va installato all aperto, nemmeno se lo spazio è riparato, perché è molto pericoloso lasciarlo esposto a pioggia e temporali. Per movimentare l apparecchio servirsi sempre delle apposite maniglie poste sui fianchi del forno. Non toccare l apparecchio a piedi nudi o le mani o i piedi bagnati o umidi. L apparecchio deve essere usato per cuocere alimenti, solo da persone adulte e secondo le istruzioni riportate in questo libretto. Ogni altro uso (ad esempio: riscaldamento di ambienti) è da considerarsi improprio e quindi pericoloso. Il costruttore non può essere considerato responsabile per eventuali danni derivanti da usi impropri, erronei ed irragionevoli. Durante l uso dell apparecchio gli elementi riscaldanti e alcune parti della porta forno diventano molto calde. Fare attenzione a non toccarle e tenere i bambimi a distanza. Evitare che il cavo di alimentazione di altri elettrodomestici entri in contatto con parti calde del forno. Non ostruire le aperture di ventilazione e di smaltimento di calore. Impugnare la maniglia di apertura della porta al centro: ai lati potrebbe essere calda. Utilizzare sempre guanti da forno per inserire o estrarre recipienti. Non rivestire il fondo del forno con fogli di alluminio. Non riporre materiale infiammabile nel forno: se l apparecchio viene messo inavvertitamente in funzione potrebbe incendiarsi. Assicurarsi sempre che le manopole siano nella posizione / quando l apparecchio non è utilizzato. Non staccare la spina dalla presa della corrente tirando il cavo, bensì afferrando la spina. Non fare pulizia o manutenzione senza aver prima staccato la spina dalla rete elettrica. In caso di guasto, in nessun caso accedere ai meccanismi interni per tentare una riparazione. Contattare l Assistenza (vedi Assistenza). Non appoggiare oggetti sulla porta del forno aperta. Evitare che i bambini giochino con l apparecchio. Non è previsto che l apparecchio venga utilizzato da persone (bambini compresi) con ridotte capacità fisiche, sensoriali o mentali, da persone inesperte o che non abbiano familiarità con il prodotto, a meno che non vengano sorvegliate da una persona responsabile della loro sicurezza o non abbiano ricevuto istruzioni preliminari sull uso dell apparecchio. Evitare che i bambini giochino con l apparecchio. L apparecchio non è destinato a essere messo in funzione per mezzo di un temporizzatore esterno oppure di un sistema di comando a distanza separato. Smaltimento Smaltimento del materiale di imballaggio: attenersi alle norme locali, così gli imballaggi potranno essere riutilizzati. La direttiva Europea 0/9/CE sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE), prevede che gli elettrodomestici non debbano essere smaltiti nel normale flusso dei rifiuti solidi urbani. Gli apparecchi dismessi devono essere raccolti separatamente per ottimizzare il tasso di recupero e riciclaggio dei materiali che li compongono ed impedire potenziali danni per la salute e l ambiente. Il simbolo del cestino barrato è riportato su tutti i prodotti per ricordare gli obblighi di raccolta separata. Per ulteriori informazioni, sulla corretta dismissione degli elettrodomestici, i detentori potranno rivolgersi al servizio pubblico preposto o ai rivenditori. Risparmiare e rispettare l ambiente Azionando il forno negli orari che vanno dal tardo pomeriggio fino alle prime ore del mattino si collabora a ridurre il carico di assorbimento delle aziende elettriche. Si raccomanda di effettuare sempre le cotture al GRILL e GRATIN a porta chiusa: sia per ottenere migliori risultati che per un sensibile risparmio di energia (0% circa). Mantenere efficienti e pulite le guarnizioni, in modo che aderiscano bene alla porta e non procurino dispersioni di calore. IT

16 IT Manutenzione e cura Escludere la corrente elettrica Prima di ogni operazione isolare l apparecchio dalla rete di alimentazione elettrica. Pulire l apparecchio Le parti esterne smaltate o inox e le guarnizioni in gomma possono essere pulite con una spugnetta imbevuta di acqua tiepida, e sapone neutro. Se le macchie sono difficili da asportare usare prodotti specifici. Si consiglia di sciacquare abbondantemente e di asciugare dopo la pulizia. Non usare polveri abrasive o sostanze corrosive. L interno del forno va pulito preferibilmente ogni volta dopo l uso, quando è ancora tiepido. Usare acqua calda e detersivo, risciaquare e asciugare con un panno morbido. Evitare gli abrasivi. Gli accessori possono essere lavati come normali stoviglie, anche in lavastoviglie ad eccezione delle guide scorrevoli.! Non utilizzare mai pulitori a vapore o ad alta pressione per la pulizia dell apparecchio. Pulire la porta Pulire il vetro della porta con spugne e prodotti non abrasivi e asciugare con un panno morbido; non usare materiali ruvidi abrasivi o raschietti metallici affilati che possono graffiare la superficie e causare la frantumazione del vetro. Per una pulizia più accurata è possibile smontare la porta del forno:. aprire completamente la porta (vedi figura);. servendosi di un cacciavite, alzare e ruotare le levette F poste sulle due cerniere (vedi figura); Sostituire la lampadina Per sostituire la lampadina di illuminazione del forno. Svitare il coperchio in vetro del portalampada.. Svitare la lampadina e sostituirla con una analoga: potenza W, attacco E.. Rimontare il coperchio (vedi figura)! Non utilizzare la lampada forno per e come illuminazione di ambienti. F. afferrare la porta ai due lati esterni, richiudendola lentamente ma non del tutto. Poi tirare la porta verso di sé estraendola dalla sua sede (vedi figura).! Rimontare la porta seguendo il procedimento in senso contrario. Controllare le guarnizioni Controllare periodicamente lo stato della guarnizione attorno alla porta del forno. In caso risulti danneggiata rivolgersi al Centro Assistenza più vicino (vedi Assistenza). È consigliabile non usare il forno fino all avvenuta riparazione. 6

17 Installation! Please keep this instruction booklet in a safe place for future reference. If the appliance is sold, given away or moved, please make sure the booklet is also passed on to the new owners so that they may benefit from the advice contained within it.! Please read this instruction manual carefully: it contains important information concerning the safe operation, installation and maintenance of the appliance. Positioning! Do not let children play with the packaging material; it should be disposed of in accordance with local separated waste collection standards (see Precautions and tips).! The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals. Builtin appliances Use an appropriate cabinet to ensure that the appliance operates properly: The panels adjacent to the oven must be made of heatresistant material. Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 00 C. o install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions: Centring and fixing Secure the appliance to the cabinet: Open the oven door. Remove the rubber plugs covering the fixing holes on the perimeter frame. Fix the oven to the cabinet using the wood screws. Replace the rubber plugs.! All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool. Electrical connection Ovens equipped with a threepole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below). Fitting the power supply cable GB 90 mm. 0 mm. 70 mm. 0 mm. min. mm. 60 mm. 78 mm.. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram). 9 mm. 0 mm. 0, mm., mm.*! The appliance must not come into contact with electrical parts once it has been installed. The indications for consumption given on the data plate have been calculated for this type of installation. Ventilation To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least x 60 mm (see diagrams). 60 mm. mm. N L L N. Install the power supply cable by loosening the cable clamp screw and the three wire contact screws LN. Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire to the terminal marked (see diagram).. Secure the cable by fastening the clamp screw.. Close the cover of the terminal board. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate (see table). The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 0 C at any point (the back panel of the oven, for example). 7

18 GB! The installer must ensure that the correct electrical connection has been performed and that it is fully compliant with safety regulations. Before connecting the appliance to the power supply, make sure that The appliance is earthed and the plug is compliant with the law. The socket can withstand the maximum power of the appliance, which is indicated on the data plate. The voltage is in the range between the values indicated on the data plate. The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.! The cable must not be bent or compressed.! The cable must be checked regularly and replaced by authorised technicians only (see Assistance). APPLIANCE SPECIFICATIONS Dimensions* Volume* Dimensions** Volume** Electrical connections width. cm height, cm depth. cm 9 l width. cm height, cm depth. cm 6 l voltage: 0 0 V~ 0/60 Hz (see data plate) maximum power absorbed 800 W Directive /0/EC on the label of electric ovens. Standard EN 00! The manufacturer declines any liability should these safety measures not be observed. ENERGY LABEL Energy consumption for Natural convection heating mode: Traditional mode Declared energy consumption for Forced convection Class heating mode: Baking This appliance conforms to the following European Economic Community directives: 6/9/EEC dated //06 (Low Voltage) and subsequent amendments /08/EEC dated 0/0/89 (Electromagnetic Compatibility) and subsequent amendments 9/68/EEC dated /07/9 and subsequent amendments. 0/9/EEC and subsequent amendments. 7/8 standby/off mode * Only for models with drawn rails. ** Only for models with wire rails. 8

19 Startup and use WARNING! The oven is provided with a stop system to extract the racks and prevent them from coming out of the oven (). As shown in the drawing, to extract them completely, simply lift the racks, holding them on the front part, and pull ().! The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away. Some models are equipped with a system of hinges which allows the door to close slowly, without the user having to follow the movement through with his/ her hand. To use the system correctly, before closing the door: Open the door fully. Do not force the closing movement manually. Starting the oven. Select the desired cooking mode by turning the SELECTOR knob.. Select the desired temperature using the THERMOSTAT knob. A list detailing cooking modes and suggested cooking temperatures can be found in the Cooking advice table (see Cooking modes).. The THERMOSTAT indicator light indicates that the oven is heating up to the temperature set.. During cooking it is always possible to: change the cooking mode by turning the SELECTOR knob; adjust the temperature by turning the THERMOSTAT knob; stop cooking by turning the SELECTOR knob to the 0 position.! Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.! Always place cookware on the rack(s) provided. Cooling ventilation In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door.! Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently. Oven light When selecting with the SELECTOR knob the oven light goes on. It remains lit when a cooking mode is selected. The electronic programmer END OF COOKING icon DURATION icon DECREASE TIME button DISPLAY SET TIME button CLOCK icon TIMER icon INCREASE TIME button Setting the clock! The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the mains, or after a blackout, the icon and the four numerical digits on the DISPLAY will begin to flash.. Press the button several times until the icon and the four digits on the display begin to flash.. Use the and buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value.. Wait for 0 seconds or press the button again to finalise the setting. Setting the timer! This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.. Press the button several times until the icon and the three digits on the display begin to flash.. Use the and buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value.. Wait for 0 seconds or press the button again to finalise the setting. The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated. Programming cooking! A cooking mode must be selected before programming can take place. Programming the cooking duration. Press the button several times until the icon and the three digits on the DISPLAY begin to flash.. Use the and buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value.. Wait for 0 seconds or press the button again to finalise the setting.. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. Press any button to stop it. For example: it is 9:00 a.m. and a time of hour and minutes is programmed. The programme will stop automatically at 0: a.m. GB 9

20 GB Setting the end time for a cooking mode! A cooking duration must be set before the cooking end time can be scheduled.. Follow steps to to set the duration as detailed above.. Next, press the button until the icon and the four digits on the DISPLAY begin to flash.. use the and buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value.. Wait for 0 seconds or press the button again to finalise the setting.. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.press any button to stop it. Programming has been set when the and buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately. For example: It is 9:00 a.m. and a duration of hour has been programmed. :0 is scheduled as the end time. The programme will start automatically at :0 a.m. Cancelling a programme To cancel a programme: press the button until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the button until the digits 00:00 appear on the display. Press and hold the and buttons; this will cancel all the settings selected previously, including timer settings. Modes Cooking modes! A temperature value between 60 C and can be set for all cooking modes except the following: GRILL (recommended: set only to power level) GRATIN (recommended: do not exceed C). TRADITIONAL OVEN mode Both the top and bottom heating elements will come on. When using this traditional cooking mode, it is best to use one cooking rack only. If more than one rack is used, the heat will be distributed unevenly. MULTILEVEL mode All the heating elements (top, bottom and circular) switch on and the fan begins to operate. Since the heat remains constant throughout the oven, the air cooks and browns food in a uniform manner. A maximum of two racks may be used at the same time. door closed. GRATIN mode The top heating element and the rotisserie (where present) are activated and the fan begins to operate. This combination of features increases the effectiveness of the unidirectional thermal radiation provided by the heating elements through forced circulation of the air throughout the oven. This helps prevent food from burning on the surface and allows the heat to penetrate right into the food. Always cook in this mode with the oven door closed. BAKING mode The rear heating element and the fan are switched on, thus guaranteeing the distribution of heat in a delicate and uniform manner throughout the entire oven. This mode is ideal for baking temperature sensitive foods (such as cakes, which need to rise) and for the preparation of bitesize pastries on shelves simultaneously. Practical cooking advice! Do not place racks in position or during fanassisted cooking. Excessive direct heat can burn temperature sensitive foods.! In the GRILL and GRATIN cooking modes, place the dripping pan in position to collect cooking residues (sauce and/or grease). MULTILEVEL Use positions and, placing the food which requires more heat on the rack in position. Place the dripping pan on the bottom and the rack on top. GRILL Place the rack in position or. Make sure the food is in the centre of the rack. We recommend that the power level is set to maximum. The top heating element is regulated by a thermostat and may not always operate constantly. PIZZA OVEN MODE Use a lightweight aluminium pizza pan. Place it on the rack provided. For a crispy crust, do not use the dripping pan as this extends the total cooking duration and prevents the crust from forming. If the pizza has a lot of toppings, we recommend adding the mozzarella cheese to the top of the pizza halfway through the cooking process. PIZZA OVEN mode The circular heating elements and the elements at the bottom of the oven are switched on and the fan is activated. This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the element at the bottom. If you use more than one rack at a time, switch the position of the dishes halfway through the cooking process. GRILL mode The top heating element and the rotisserie (where present) come on. The high and direct temperature of the grill is recommended for food which requires a high surface temperature. Always cook in this mode with the oven 0

Περιεχόμενα / Contents

Περιεχόμενα / Contents Aερόθερμo / Fan Heater PTC-906 Περιεχόμενα / Contents GR... Σελίδες 3-8 EN... Pages 9-11 2 GR Ευχαριστούμε που επιλέξατε μια συσκευή της γκάμας θερμαντικών IZZY. Σημαντικές Οδηγίες Ασφαλείας Τα Μέρη της

Διαβάστε περισσότερα

the total number of electrons passing through the lamp.

the total number of electrons passing through the lamp. 1. A 12 V 36 W lamp is lit to normal brightness using a 12 V car battery of negligible internal resistance. The lamp is switched on for one hour (3600 s). For the time of 1 hour, calculate (i) the energy

Διαβάστε περισσότερα

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

Διαβάστε περισσότερα

MOTORI PER VENTILATORI MOTORS FOR BLOWERS

MOTORI PER VENTILATORI MOTORS FOR BLOWERS MOTORI PER VENTILATORI MOTORS FOR BLOWERS LR 91167 FLANGIA TIPO A FLANGE TYPE A TIPO / TYPE A B C D E F G H I* L M N O P Q BM.80.A2.1000 315 250 290 20 225 φ 7 155 33 19 h7 114 84 6 21.5 M 8 3/8 BM.80.A2.1001

Διαβάστε περισσότερα

Capacitors - Capacitance, Charge and Potential Difference

Capacitors - Capacitance, Charge and Potential Difference Capacitors - Capacitance, Charge and Potential Difference Capacitors store electric charge. This ability to store electric charge is known as capacitance. A simple capacitor consists of 2 parallel metal

Διαβάστε περισσότερα

Potential Dividers. 46 minutes. 46 marks. Page 1 of 11

Potential Dividers. 46 minutes. 46 marks. Page 1 of 11 Potential Dividers 46 minutes 46 marks Page 1 of 11 Q1. In the circuit shown in the figure below, the battery, of negligible internal resistance, has an emf of 30 V. The pd across the lamp is 6.0 V and

Διαβάστε περισσότερα

ΚΥΠΡΙΑΚΗ ΕΤΑΙΡΕΙΑ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ 19/5/2007

ΚΥΠΡΙΑΚΗ ΕΤΑΙΡΕΙΑ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ 19/5/2007 Οδηγίες: Να απαντηθούν όλες οι ερωτήσεις. Αν κάπου κάνετε κάποιες υποθέσεις να αναφερθούν στη σχετική ερώτηση. Όλα τα αρχεία που αναφέρονται στα προβλήματα βρίσκονται στον ίδιο φάκελο με το εκτελέσιμο

Διαβάστε περισσότερα

Instruction Execution Times

Instruction Execution Times 1 C Execution Times InThisAppendix... Introduction DL330 Execution Times DL330P Execution Times DL340 Execution Times C-2 Execution Times Introduction Data Registers This appendix contains several tables

Διαβάστε περισσότερα

!Stato di tensione triassiale!stato di tensione piano!cerchio di Mohr

!Stato di tensione triassiale!stato di tensione piano!cerchio di Mohr !Stato di tensione triassiale!stato di tensione piano!cerchio di Mohr Stato di tensione F A = F / A F Traione pura stato di tensione monoassiale F M A M Traione e torsione stato di tensione piano = F /

Διαβάστε περισσότερα

Right Rear Door. Let's now finish the door hinge saga with the right rear door

Right Rear Door. Let's now finish the door hinge saga with the right rear door Right Rear Door Let's now finish the door hinge saga with the right rear door You may have been already guessed my steps, so there is not much to describe in detail. Old upper one file:///c /Documents

Διαβάστε περισσότερα

Εγκατάσταση λογισμικού και αναβάθμιση συσκευής Device software installation and software upgrade

Εγκατάσταση λογισμικού και αναβάθμιση συσκευής Device software installation and software upgrade Για να ελέγξετε το λογισμικό που έχει τώρα η συσκευή κάντε κλικ Menu > Options > Device > About Device Versions. Στο πιο κάτω παράδειγμα η συσκευή έχει έκδοση λογισμικού 6.0.0.546 με πλατφόρμα 6.6.0.207.

Διαβάστε περισσότερα

BFN3000 ΕΠΙΤΡΑΠΕΖΙΟΣ ΑΝΕΜΙΣΤΗΡΑΣ. Owner s manual. Μετάφραση του πρωτοτύπου των οδηγιών χρήσης

BFN3000 ΕΠΙΤΡΑΠΕΖΙΟΣ ΑΝΕΜΙΣΤΗΡΑΣ.   Owner s manual. Μετάφραση του πρωτοτύπου των οδηγιών χρήσης BFN3000 ΕΠΙΤΡΑΠΕΖΙΟΣ ΑΝΕΜΙΣΤΗΡΑΣ Μετάφραση του πρωτοτύπου των οδηγιών χρήσης Owner s manual www.bormanntools.com GR Οδηγίες ασφαλούς λειτουργίας 1. Τα χαρακτηριστικά της παροχής ηλεκτρικού ρεύματος θα

Διαβάστε περισσότερα

HOMEWORK 4 = G. In order to plot the stress versus the stretch we define a normalized stretch:

HOMEWORK 4 = G. In order to plot the stress versus the stretch we define a normalized stretch: HOMEWORK 4 Problem a For the fast loading case, we want to derive the relationship between P zz and λ z. We know that the nominal stress is expressed as: P zz = ψ λ z where λ z = λ λ z. Therefore, applying

Διαβάστε περισσότερα

(1) Describe the process by which mercury atoms become excited in a fluorescent tube (3)

(1) Describe the process by which mercury atoms become excited in a fluorescent tube (3) Q1. (a) A fluorescent tube is filled with mercury vapour at low pressure. In order to emit electromagnetic radiation the mercury atoms must first be excited. (i) What is meant by an excited atom? (1) (ii)

Διαβάστε περισσότερα

UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:

UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example: UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,

Διαβάστε περισσότερα

Stato di tensione triassiale Stato di tensione piano Cerchio di Mohr

Stato di tensione triassiale Stato di tensione piano Cerchio di Mohr Stato di tensione triassiale Stato di tensione iano Cerchio di Mohr Stato di tensione F A = F / A F Traione ura stato di tensione monoassiale F M A M Traione e torsione stato di tensione iano = F / A =

Διαβάστε περισσότερα

ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ USE INSTRUCTIONS

ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ USE INSTRUCTIONS ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ USE INSTRUCTIONS ΤΗΛΕΦΩΝΟ ΜΕ ΑΝΑΓΝΩΡΙΣΗ ΚΛΗΣΗΣ /CORDED PHONE WITH CALLER ID ΜΟΝΤΕΛΟ/MODEL: TM09-448 DC48V Παρακαλούμε διαβάστε προσεκτικά όλες τις οδηγίες χρήσης πριν την χρήση της συσκευής

Διαβάστε περισσότερα

SPECIFICATIONS... Pag. 2. WIRE SOLDER... Pag. 3. PCB SOLDER... Pag HIGH VOLTAGE PCB SOLDER... Pag. 6. RIGHT ANGLE PCB... Pag.

SPECIFICATIONS... Pag. 2. WIRE SOLDER... Pag. 3. PCB SOLDER... Pag HIGH VOLTAGE PCB SOLDER... Pag. 6. RIGHT ANGLE PCB... Pag. DIN 41618 & 41622 INDEX DIN 41618 SPECIFICATIONS.......................................................... Pag. 2 WIRE SOLDER............................................................ Pag. 3 PCB SOLDER.............................................................

Διαβάστε περισσότερα

Ge m i n i. il nuovo operatore compatto e leggero. η καινούργια και ελαφριά αυτόματη πόρτα

Ge m i n i. il nuovo operatore compatto e leggero. η καινούργια και ελαφριά αυτόματη πόρτα Ge m i n i 6 il nuovo operatore compatto e leggero η καινούργια και ελαφριά αυτόματη πόρτα Porte Gemini 6 Operatore a movimento lineare per porte automatiche a scorrimento orizzontale. Leggero, robusto

Διαβάστε περισσότερα

[1] P Q. Fig. 3.1

[1] P Q. Fig. 3.1 1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One

Διαβάστε περισσότερα

Tipologie installative - Installation types Type d installation - Installationstypen Tipos de instalación - Τυπολογίες εγκατάστασης

Tipologie installative - Installation types Type d installation - Installationstypen Tipos de instalación - Τυπολογίες εγκατάστασης AMPADE MOOCROMATICHE VIMAR DIMMERABII A 0 V~ - VIMAR 0 V~ DIMMABE MOOCHROME AMP AMPE MOOCHROME VIMAR VARIATEUR 0 V~ - DIMMERFÄHIGE MOOCHROMATICHE AMPE VO VIMAR MIT 0 V~ ÁMPARA MOOCROMÁTICA VIMAR REGUABE

Διαβάστε περισσότερα

H6GG1F IT. Istruzioni per l uso CUCINA E FORNO. Οδηγίες χρήσης ΚΟΥΖΙΝΑ ΚΑΙ ΦΟΥΡΝΟΣ. PT Instruções para a utilização FOGÃO E FORNO. Italiano.

H6GG1F IT. Istruzioni per l uso CUCINA E FORNO. Οδηγίες χρήσης ΚΟΥΖΙΝΑ ΚΑΙ ΦΟΥΡΝΟΣ. PT Instruções para a utilização FOGÃO E FORNO. Italiano. H6GG1F IT IT GR Italiano Istruzioni per l uso CUCINA E FORNO Sommario Istruzioni per l uso,1 ATTENZIONE,2 Descrizione dell apparecchio- Vista d insieme,5 Descrizione dell apparecchio- Pannello di controllo,6

Διαβάστε περισσότερα

CONFIGURAZIONE DELLA CASELLA DI POSTA ELETTRONICA CERTIFICATA (P.E.C.)

CONFIGURAZIONE DELLA CASELLA DI POSTA ELETTRONICA CERTIFICATA (P.E.C.) CONFIGURAZIONE DELLA CASELLA DI POSTA ELETTRONICA CERTIFICATA (P.E.C.) Consigliamo di configurare ed utilizzare la casella di posta elettronica certificata tramite il webmail dedicato fornito dal gestore

Διαβάστε περισσότερα

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating

Διαβάστε περισσότερα

Αποτελέσματα έρευνας σε συνδικαλιστές

Αποτελέσματα έρευνας σε συνδικαλιστές From law to practice-praxis Αποτελέσματα έρευνας σε συνδικαλιστές Το πρόγραμμα συγχρηματοδοτείται από την ΕΕ Συγχρηματοδοτείται από την Ευρωπαϊκή Ένωση Γνωρίζετε τι προβλέπει η Οδηγία 2002/14; Sa che cosa

Διαβάστε περισσότερα

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

Surface Mount Multilayer Chip Capacitors for Commodity Solutions Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF

Διαβάστε περισσότερα

Microscopi a penna PEAK. Sommario

Microscopi a penna PEAK. Sommario Microscopi a penna PEAK Sommario Microscopi a penna PEAK 2001-15 2 Microscopio a penna PEAK 2001-15, versione lunga 3 Microscopio a penna PEAK 2001-25 3 Microscopio a penna PEAK 2001-50 4 Microscopio a

Διαβάστε περισσότερα

2 Composition. Invertible Mappings

2 Composition. Invertible Mappings Arkansas Tech University MATH 4033: Elementary Modern Algebra Dr. Marcel B. Finan Composition. Invertible Mappings In this section we discuss two procedures for creating new mappings from old ones, namely,

Διαβάστε περισσότερα

ΚΥΠΡΙΑΚΗ ΕΤΑΙΡΕΙΑ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ 6/5/2006

ΚΥΠΡΙΑΚΗ ΕΤΑΙΡΕΙΑ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ 6/5/2006 Οδηγίες: Να απαντηθούν όλες οι ερωτήσεις. Ολοι οι αριθμοί που αναφέρονται σε όλα τα ερωτήματα είναι μικρότεροι το 1000 εκτός αν ορίζεται διαφορετικά στη διατύπωση του προβλήματος. Διάρκεια: 3,5 ώρες Καλή

Διαβάστε περισσότερα

ANSWERSHEET (TOPIC = DIFFERENTIAL CALCULUS) COLLECTION #2. h 0 h h 0 h h 0 ( ) g k = g 0 + g 1 + g g 2009 =?

ANSWERSHEET (TOPIC = DIFFERENTIAL CALCULUS) COLLECTION #2. h 0 h h 0 h h 0 ( ) g k = g 0 + g 1 + g g 2009 =? Teko Classes IITJEE/AIEEE Maths by SUHAAG SIR, Bhopal, Ph (0755) 3 00 000 www.tekoclasses.com ANSWERSHEET (TOPIC DIFFERENTIAL CALCULUS) COLLECTION # Question Type A.Single Correct Type Q. (A) Sol least

Διαβάστε περισσότερα

SPEEDO AQUABEAT. Specially Designed for Aquatic Athletes and Active People

SPEEDO AQUABEAT. Specially Designed for Aquatic Athletes and Active People SPEEDO AQUABEAT TM Specially Designed for Aquatic Athletes and Active People 1 2 Decrease Volume Increase Volume Reset EarphonesUSBJack Power Off / Rewind Power On / Fast Forward Goggle clip LED Status

Διαβάστε περισσότερα

derivation of the Laplacian from rectangular to spherical coordinates

derivation of the Laplacian from rectangular to spherical coordinates derivation of the Laplacian from rectangular to spherical coordinates swapnizzle 03-03- :5:43 We begin by recognizing the familiar conversion from rectangular to spherical coordinates (note that φ is used

Διαβάστε περισσότερα

DESIGN OF MACHINERY SOLUTION MANUAL h in h 4 0.

DESIGN OF MACHINERY SOLUTION MANUAL h in h 4 0. DESIGN OF MACHINERY SOLUTION MANUAL -7-1! PROBLEM -7 Statement: Design a double-dwell cam to move a follower from to 25 6, dwell for 12, fall 25 and dwell for the remader The total cycle must take 4 sec

Διαβάστε περισσότερα

English 3 Italiano 6 Ελληνικά 10

English 3 Italiano 6 Ελληνικά 10 2 English 3 Italiano 6 Ελληνικά 10 3 5 3 4 6 2 ENGLISH English Intended use Your Black and Decker sandwich maker/healthy grill has been designed for making toasted sandwiches and grilling food as described

Διαβάστε περισσότερα

CHAPTER 25 SOLVING EQUATIONS BY ITERATIVE METHODS

CHAPTER 25 SOLVING EQUATIONS BY ITERATIVE METHODS CHAPTER 5 SOLVING EQUATIONS BY ITERATIVE METHODS EXERCISE 104 Page 8 1. Find the positive root of the equation x + 3x 5 = 0, correct to 3 significant figures, using the method of bisection. Let f(x) =

Διαβάστε περισσότερα

EE512: Error Control Coding

EE512: Error Control Coding EE512: Error Control Coding Solution for Assignment on Finite Fields February 16, 2007 1. (a) Addition and Multiplication tables for GF (5) and GF (7) are shown in Tables 1 and 2. + 0 1 2 3 4 0 0 1 2 3

Διαβάστε περισσότερα

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater. Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges

Διαβάστε περισσότερα

Un calcolo deduttivo per la teoria ingenua degli insiemi. Giuseppe Rosolini da un università ligure

Un calcolo deduttivo per la teoria ingenua degli insiemi. Giuseppe Rosolini da un università ligure Un calcolo deduttivo per la teoria ingenua degli insiemi Giuseppe Rosolini da un università ligure Non è quella in La teoria ingenua degli insiemi Ma è questa: La teoria ingenua degli insiemi { < 3} è

Διαβάστε περισσότερα

Quick Installation Guide

Quick Installation Guide A Installation 1 F H B E C D G 2 www.trust.com/17528/faq Quick Installation Guide C C D Freewave Wireless Audio Set 17528/ 17529 D Installation Configuration Windows XP 4 5 8 Windows 7/ Vista 6 7 9 10

Διαβάστε περισσότερα

Glass Door Freezers Service Manual

Glass Door Freezers Service Manual Turbo Air Speed up the Pace of Innovation CAUTION! PLEASE KEEP POWER SWITCH ON BEFORE OPERATING THIS EQUIPMENT Glass Door Freezers Service Manual Please read this manual completely before attempting to

Διαβάστε περισσότερα

Modbus basic setup notes for IO-Link AL1xxx Master Block

Modbus basic setup notes for IO-Link AL1xxx Master Block n Modbus has four tables/registers where data is stored along with their associated addresses. We will be using the holding registers from address 40001 to 49999 that are R/W 16 bit/word. Two tables that

Διαβάστε περισσότερα

ULX Wireless System USER GUIDE SUPPLEMENT RENSEIGNEMENT SUPPLÉMENTAIRES INFORMACION ADICIONAL. M1 ( MHz)

ULX Wireless System USER GUIDE SUPPLEMENT RENSEIGNEMENT SUPPLÉMENTAIRES INFORMACION ADICIONAL. M1 ( MHz) ULX Wireless System USER GUIDE SUPPLEMENT RENSEIGNEMENT SUPPLÉMENTAIRES INFORMACION ADICIONAL M1 (662 698 MHz) 2003, Shure Incorporated 27B8733A (Rev. 4) Printed in U.S.A. SPECIFICATIONS ULX1 Transmitter

Διαβάστε περισσότερα

Εργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων. Εξάμηνο 7 ο

Εργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων. Εξάμηνο 7 ο Εργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων Εξάμηνο 7 ο Procedures and Functions Stored procedures and functions are named blocks of code that enable you to group and organize a series of SQL and PL/SQL

Διαβάστε περισσότερα

Section 8.3 Trigonometric Equations

Section 8.3 Trigonometric Equations 99 Section 8. Trigonometric Equations Objective 1: Solve Equations Involving One Trigonometric Function. In this section and the next, we will exple how to solving equations involving trigonometric functions.

Διαβάστε περισσότερα

Istruzioni per l uso Οδηγίες χρήσης ΑΤΜΟΣΥΣΤΗΜΑ

Istruzioni per l uso Οδηγίες χρήσης ΑΤΜΟΣΥΣΤΗΜΑ Istruzioni per l uso Οδηγίες χρήσης Sistema stirante ΑΤΜΟΣΥΣΤΗΜΑ Indice - Περιεχόμενα IT Descrizione... 4 Descrizione... 4 Pannello comandi... 4 Ferro di tipo professionale... 4 Ferro di tipo domestico...

Διαβάστε περισσότερα

INSTRUCTIONS MANUAL ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ

INSTRUCTIONS MANUAL ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ Model/Μοντέλο: WKH-1132 INSTRUCTIONS MANUAL ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ ENGLISH General Safety Instructions Before commissioning this kettle, please read the instruction manual carefully. Please keep the instruction

Διαβάστε περισσότερα

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical

Διαβάστε περισσότερα

ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣTΑΣΗΣ ΓΙΑ ΠΑΤΩΜΑ WPC INSTALLATION GUIDE FOR WPC DECKING

ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣTΑΣΗΣ ΓΙΑ ΠΑΤΩΜΑ WPC INSTALLATION GUIDE FOR WPC DECKING 1/12 ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣTΑΣΗΣ ΓΙΑ ΠΑΤΩΜΑ WPC INSTALLATION GUIDE FOR WPC DECKING Ανοίγουμε τρύπες Ø8 x 80mm στο σημείο κατασκευής, με τρυπάνι. To προτεινόμενο πλάτος και μήκος μεταξύ των 2 οπών να είναι 30-35εκ.,

Διαβάστε περισσότερα

User s Manual / Οδηγίες Χρήσης

User s Manual / Οδηγίες Χρήσης User s Manual / Οδηγίες Χρήσης EUROPEAN STANDARDS Your child s safety depends on you. Proper bed rail usage cannot be assured unless you follow these instructions. DO NOT USE YOUR BED RAIL UNTILL YOU READ

Διαβάστε περισσότερα

Bulletin 1489 UL489 Circuit Breakers

Bulletin 1489 UL489 Circuit Breakers Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker

Διαβάστε περισσότερα

RSDW08 & RDDW08 series

RSDW08 & RDDW08 series /,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05

Διαβάστε περισσότερα

Math 6 SL Probability Distributions Practice Test Mark Scheme

Math 6 SL Probability Distributions Practice Test Mark Scheme Math 6 SL Probability Distributions Practice Test Mark Scheme. (a) Note: Award A for vertical line to right of mean, A for shading to right of their vertical line. AA N (b) evidence of recognizing symmetry

Διαβάστε περισσότερα

Assalamu `alaikum wr. wb.

Assalamu `alaikum wr. wb. LUMP SUM Assalamu `alaikum wr. wb. LUMP SUM Wassalamu alaikum wr. wb. Assalamu `alaikum wr. wb. LUMP SUM Wassalamu alaikum wr. wb. LUMP SUM Lump sum lump sum lump sum. lump sum fixed price lump sum lump

Διαβάστε περισσότερα

NPI Unshielded Power Inductors

NPI Unshielded Power Inductors FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC

Διαβάστε περισσότερα

Summary of Specifications

Summary of Specifications Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours

Διαβάστε περισσότερα

How to register an account with the Hellenic Community of Sheffield.

How to register an account with the Hellenic Community of Sheffield. How to register an account with the Hellenic Community of Sheffield. (1) EN: Go to address GR: Πηγαίνετε στη διεύθυνση: http://www.helleniccommunityofsheffield.com (2) EN: At the bottom of the page, click

Διαβάστε περισσότερα

TIME SWITCHES AND TWILIGHT SWITCHES

TIME SWITCHES AND TWILIGHT SWITCHES W ANALOG DIN-RAIL TIME SWITCH QUARTZ, SERIES TEMPUS ANALOG 244 W SCHRACK-INFO Analogue time switch 1 channel Daily program With power reserve (NiMH rechargeable battery) Synchronised with mains Shortest

Διαβάστε περισσότερα

X815 X715. www.blackanddecker.co.uk

X815 X715. www.blackanddecker.co.uk www.blackanddecker.co.uk X815 X715 English 1. Spray button 2. Steam control dial 3. Steam burst button 4. Temperature control dial 5. Heating light 6. Heel rest 7. Self-clean button 8. Cord storage 9.

Διαβάστε περισσότερα

G. Parmeggiani, 15/1/2019 Algebra Lineare, a.a. 2018/2019, numero di MATRICOLA PARI. Svolgimento degli Esercizi per casa 12

G. Parmeggiani, 15/1/2019 Algebra Lineare, a.a. 2018/2019, numero di MATRICOLA PARI. Svolgimento degli Esercizi per casa 12 G. Parmeggiani, 5//9 Algebra Lineare, a.a. 8/9, Scuola di Scienze - Corsi di laurea: Studenti: Statistica per l economia e l impresa Statistica per le tecnologie e le scienze numero di MATRICOLA PARI Svolgimento

Διαβάστε περισσότερα

Istruzioni per l uso Οδηγίες χρήσης RASOIO DEPILATORE. IT pagina 1 ΕΛ σελίδα 12

Istruzioni per l uso Οδηγίες χρήσης RASOIO DEPILATORE. IT pagina 1 ΕΛ σελίδα 12 Istruzioni per l uso Οδηγίες χρήσης RASOIO DEPILATORE IT pagina 1 ΕΛ σελίδα 12 [A] [B1] [B2] [B3] 4 [E] 1 2 1 3 2 5 [C1] [C2] [D1] 3 4 7 6 [D2] [D3] 5 6 8 9 10 Type E1101 IPX5 IN: 3V Battery Battery Ni-MH

Διαβάστε περισσότερα

MARKET INTRODUCTION System integration

MARKET INTRODUCTION System integration MARKET INTRODUCTION System integration Air to Water Split System Inverter Driven Nomιnal Capacities : 5-6,5-9 - 11,5 kwth Max LWT= 60 C & Min OAT = -15 C COP>= 4.1 Air to Water Monoblock Inverter Driven

Διαβάστε περισσότερα

The challenges of non-stable predicates

The challenges of non-stable predicates The challenges of non-stable predicates Consider a non-stable predicate Φ encoding, say, a safety property. We want to determine whether Φ holds for our program. The challenges of non-stable predicates

Διαβάστε περισσότερα

Door Hinge replacement (Rear Left Door)

Door Hinge replacement (Rear Left Door) Door Hinge replacement (Rear Left Door) We will continue the previous article by replacing the hinges of the rear left hand side door. I will use again the same procedure and means I employed during the

Διαβάστε περισσότερα

Ακαδημαϊκός Λόγος Εισαγωγή

Ακαδημαϊκός Λόγος Εισαγωγή - Nel presente studio/saggio/lavoro si andranno ad esaminare/investigare/analizzare/individuare... Γενική εισαγωγή για μια εργασία/διατριβή Per poter rispondere a questa domanda, mi concentrerò in primo

Διαβάστε περισσότερα

Thin Film Chip Resistors

Thin Film Chip Resistors FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating

Διαβάστε περισσότερα

Advanced Subsidiary Unit 1: Understanding and Written Response

Advanced Subsidiary Unit 1: Understanding and Written Response Write your name here Surname Other names Edexcel GE entre Number andidate Number Greek dvanced Subsidiary Unit 1: Understanding and Written Response Thursday 16 May 2013 Morning Time: 2 hours 45 minutes

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors (Large Can Type)

Aluminum Electrolytic Capacitors (Large Can Type) Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction

Διαβάστε περισσότερα

Homework 8 Model Solution Section

Homework 8 Model Solution Section MATH 004 Homework Solution Homework 8 Model Solution Section 14.5 14.6. 14.5. Use the Chain Rule to find dz where z cosx + 4y), x 5t 4, y 1 t. dz dx + dy y sinx + 4y)0t + 4) sinx + 4y) 1t ) 0t + 4t ) sinx

Διαβάστε περισσότερα

OUR PRODUCT RANGE. www.rakson.gr

OUR PRODUCT RANGE. www.rakson.gr ΤΑ ΑΛΛΑ ΕΙ Η ΠΡΟΪΟΝΤΑ ΜΑΣ ΜΕΤΑΣΧΗΜΑΤΙΣΤΕΣ ΚΟΥ ΟΥΝΙΩΝ ΚΟΥ ΟΥΝΙΑ ΜΠΟΥΤΟΝ ΚΟΥ ΟΥΝΙΩΝ ΑΥΤΟΜΑΤΟΙ ΚΛΙΜΑΚΟΣΤΑΣΙΟΥ ΚΛΕΙ ΑΡΙΕΣ ΑΝΙΧΝΕΥΤΕΣ ΚΙΝΗΣΗΣ ΣΥΣΤΗΜΑΤΑ ΕΠΙΚΟΙΝΩΝΙΑΣ Θυροτηλεοράσεις Θυροτηλέφωνα Ενδοεπικοινωνίες

Διαβάστε περισσότερα

7 Present PERFECT Simple. 8 Present PERFECT Continuous. 9 Past PERFECT Simple. 10 Past PERFECT Continuous. 11 Future PERFECT Simple

7 Present PERFECT Simple. 8 Present PERFECT Continuous. 9 Past PERFECT Simple. 10 Past PERFECT Continuous. 11 Future PERFECT Simple A/ Ονόματα και ένα παράδειγμα 1 Present Simple 7 Present PERFECT Simple 2 Present Continuous 8 Present PERFECT Continuous 3 Past Simple (+ used to) 9 Past PERFECT Simple she eats she is eating she ate

Διαβάστε περισσότερα

ΕΡΙΤΟΡΕΣ ΚΑΙ ΑΝΘΩΡΟΙ ΚΛΕΙΔΙΑ ΑΝΑΘΕΣΘ ΑΓΩΝΑ ΓΑΦΕΙΟ ΑΓΩΝΩΝ ΟΓΑΝΩΤΙΚΘ ΕΡΙΤΟΡΘ. ζεκηλαρηο 1 ΡΑΓΚΟΣΜΙΑ ΟΜΟΣΡΟΝΔΙΑ (ISAF) ΕΛΛΘΝΙΚΘ ΟΜΟΣΡΟΝΔΙΑ (Ε.Ι.Ο.

ΕΡΙΤΟΡΕΣ ΚΑΙ ΑΝΘΩΡΟΙ ΚΛΕΙΔΙΑ ΑΝΑΘΕΣΘ ΑΓΩΝΑ ΓΑΦΕΙΟ ΑΓΩΝΩΝ ΟΓΑΝΩΤΙΚΘ ΕΡΙΤΟΡΘ. ζεκηλαρηο 1 ΡΑΓΚΟΣΜΙΑ ΟΜΟΣΡΟΝΔΙΑ (ISAF) ΕΛΛΘΝΙΚΘ ΟΜΟΣΡΟΝΔΙΑ (Ε.Ι.Ο. ΑΝΑΘΕΣΘ ΑΓΩΝΑ ΕΡΙΤΟΡΕΣ ΚΑΙ ΑΝΘΩΡΟΙ ΚΛΕΙΔΙΑ ΡΑΓΚΟΣΜΙΑ ΟΜΟΣΡΟΝΔΙΑ (ISAF) ΕΛΛΘΝΙΚΘ ΟΜΟΣΡΟΝΔΙΑ (Ε.Ι.Ο.) ΚΛΑΣΘ 6/6/2009 1 ΟΡΓΑΝΩΣΙΚΗ ΕΠΙΣΡΟΠΗ ΓΡΑΦΕΙΟ ΑΓΩΝΩΝ ΕΠΙΣΡΟΠΗ ΑΓΩΝΩΝ ΕΠΙΣΡΟΠΗ ΕΝΣΑΕΩΝ ΕΠΙΣΡΟΠΗ ΚΑΣΑΜΕΣΡΗΕΩΝ

Διαβάστε περισσότερα

MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments

MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover

Διαβάστε περισσότερα

KH2249. ραδιοφώνου Οδηγία χρήσης I Radio Istruzioni per l uso

KH2249. ραδιοφώνου Οδηγία χρήσης I Radio Istruzioni per l uso KH2249 ραδιοφώνου Οδηγία χρήσης I Radio Istruzioni per l uso Kompernaß GmbH Burgstrasse 21 D 44867 Bochum Deutschland/Germany www.kompernass.com KH 2249 GR/IT v.1.1 08-2006 Index 1. Υποδείξεις ασφαλείας...

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47

Διαβάστε περισσότερα

38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS

38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use

Διαβάστε περισσότερα

QUICKTRONIC PROFESSIONAL QTP5

QUICKTRONIC PROFESSIONAL QTP5 osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament

Διαβάστε περισσότερα

UNIVERSITY OF CALIFORNIA. EECS 150 Fall ) You are implementing an 4:1 Multiplexer that has the following specifications:

UNIVERSITY OF CALIFORNIA. EECS 150 Fall ) You are implementing an 4:1 Multiplexer that has the following specifications: UNIVERSITY OF CALIFORNIA Department of Electrical Engineering and Computer Sciences EECS 150 Fall 2001 Prof. Subramanian Midterm II 1) You are implementing an 4:1 Multiplexer that has the following specifications:

Διαβάστε περισσότερα

motori elettrici electric motors

motori elettrici electric motors motori elettrici electric motors MORGAN LLOYD INSPECTION AND TESTING SERVICES Frame size Level of sound pressure Lp - Livello della pressione sonora Lp Grandezza motore p = Lp - db (A) p = Lp - db (A)

Διαβάστε περισσότερα

S /5000 BTU/Hr. 1000/1500 Watt

S /5000 BTU/Hr. 1000/1500 Watt 763.576.32 SPEC-168 D763.422.2211 COOLING SEALED ENCLOSURE COOLING AIR CONDITIONERS Sealed Enclosure Cooling Air Conditioners SPECTRACOOL SLIM FIT INDOOR S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt

Διαβάστε περισσότερα

ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ/ ASSEMBLY INSTRUCTION ΤΟΜΜΥ ΚΡΕΒΑΤΙ/BED

ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ/ ASSEMBLY INSTRUCTION ΤΟΜΜΥ ΚΡΕΒΑΤΙ/BED ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ/ ASSEMBLY INSTRUCTION ΤΟΜΜΥ ΚΡΕΒΑΤΙ/BED 1. Παρακαλώ πολύ διαβάστε προσεκτικά τις οδηγίες πριν την συναρμολόγηση/ Please read the instructions carefully. 2. Παρακαλώ πολύ όπως ελέγξτε

Διαβάστε περισσότερα

Δημιουργία Λογαριασμού Διαχείρισης Business Telephony Create a Management Account for Business Telephony

Δημιουργία Λογαριασμού Διαχείρισης Business Telephony Create a Management Account for Business Telephony Δημιουργία Λογαριασμού Διαχείρισης Business Telephony Create a Management Account for Business Telephony Ελληνικά Ι English 1/7 Δημιουργία Λογαριασμού Διαχείρισης Επιχειρηματικής Τηλεφωνίας μέσω της ιστοσελίδας

Διαβάστε περισσότερα

S.Barbarino - Esercizi svolti di Campi Elettromagnetici. Esercizi svolti di Antenne - Anno 2004 I V ...

S.Barbarino - Esercizi svolti di Campi Elettromagnetici. Esercizi svolti di Antenne - Anno 2004 I V ... SBarbarino - Esercizi svolti di Campi Elettromagnetici Esercizi svolti di Antenne - Anno 004 04-1) Esercizio n 1 del 9/1/004 Si abbia un sistema di quattro dipoli hertziani inclinati, disposti uniformemente

Διαβάστε περισσότερα

Integrali doppi: esercizi svolti

Integrali doppi: esercizi svolti Integrali doppi: esercizi svolti Gli esercizi contrassegnati con il simbolo * presentano un grado di difficoltà maggiore. Esercizio. Calcolare i seguenti integrali doppi sugli insiemi specificati: a) +

Διαβάστε περισσότερα

IT - Manuale d uso per l utente EGIS PLUS 24 EGIS PLUS 24 FF EGIS PLUS 24 CF

IT - Manuale d uso per l utente EGIS PLUS 24 EGIS PLUS 24 FF EGIS PLUS 24 CF IT - Manuale d uso per l utente GR EGIS PLUS 24 EGIS PLUS 24 FF EGIS PLUS 24 CF Egregio Signore, desideriamo ringraziarla per aver preferito nel suo acquisto la caldaia di ns. produzione. Siamo certi di

Διαβάστε περισσότερα

b. Use the parametrization from (a) to compute the area of S a as S a ds. Be sure to substitute for ds!

b. Use the parametrization from (a) to compute the area of S a as S a ds. Be sure to substitute for ds! MTH U341 urface Integrals, tokes theorem, the divergence theorem To be turned in Wed., Dec. 1. 1. Let be the sphere of radius a, x 2 + y 2 + z 2 a 2. a. Use spherical coordinates (with ρ a) to parametrize.

Διαβάστε περισσότερα

ΚΥΠΡΙΑΚΟΣ ΣΥΝΔΕΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY 21 ος ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ Δεύτερος Γύρος - 30 Μαρτίου 2011

ΚΥΠΡΙΑΚΟΣ ΣΥΝΔΕΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ CYPRUS COMPUTER SOCIETY 21 ος ΠΑΓΚΥΠΡΙΟΣ ΜΑΘΗΤΙΚΟΣ ΔΙΑΓΩΝΙΣΜΟΣ ΠΛΗΡΟΦΟΡΙΚΗΣ Δεύτερος Γύρος - 30 Μαρτίου 2011 Διάρκεια Διαγωνισμού: 3 ώρες Απαντήστε όλες τις ερωτήσεις Μέγιστο Βάρος (20 Μονάδες) Δίνεται ένα σύνολο από N σφαιρίδια τα οποία δεν έχουν όλα το ίδιο βάρος μεταξύ τους και ένα κουτί που αντέχει μέχρι

Διαβάστε περισσότερα

Στο εστιατόριο «ToDokimasesPrinToBgaleisStonKosmo?» έξω από τους δακτυλίους του Κρόνου, οι παραγγελίες γίνονται ηλεκτρονικά.

Στο εστιατόριο «ToDokimasesPrinToBgaleisStonKosmo?» έξω από τους δακτυλίους του Κρόνου, οι παραγγελίες γίνονται ηλεκτρονικά. Διαστημικό εστιατόριο του (Μ)ΑστροΈκτορα Στο εστιατόριο «ToDokimasesPrinToBgaleisStonKosmo?» έξω από τους δακτυλίους του Κρόνου, οι παραγγελίες γίνονται ηλεκτρονικά. Μόλις μια παρέα πελατών κάτσει σε ένα

Διαβάστε περισσότερα

L18VFSS10E. Instruction Manual 45.7cm/18 High Power Floor Fan. Εγχειρίδιο Οδηγιών Επιδαπεδιος Ανεμιστηρας 45.7 Εκατοστομετρο

L18VFSS10E. Instruction Manual 45.7cm/18 High Power Floor Fan. Εγχειρίδιο Οδηγιών Επιδαπεδιος Ανεμιστηρας 45.7 Εκατοστομετρο L18VFSS10E Instruction Manual 45.7cm/18 High Power Floor Fan Εγχειρίδιο Οδηγιών Επιδαπεδιος Ανεμιστηρας 45.7 Εκατοστομετρο GB GR Contents GB Safety Warnings... 2 Unpacking... 5 Getting to Know Your Fan...

Διαβάστε περισσότερα

Matrices and Determinants

Matrices and Determinants Matrices and Determinants SUBJECTIVE PROBLEMS: Q 1. For what value of k do the following system of equations possess a non-trivial (i.e., not all zero) solution over the set of rationals Q? x + ky + 3z

Διαβάστε περισσότερα

Strain gauge and rosettes

Strain gauge and rosettes Strain gauge and rosettes Introduction A strain gauge is a device which is used to measure strain (deformation) on an object subjected to forces. Strain can be measured using various types of devices classified

Διαβάστε περισσότερα

Modern Greek Extension

Modern Greek Extension Centre Number 2017 HIGHER SCHOOL CERTIFICATE EXAMINATION Student Number Modern Greek Extension Written Examination General Instructions Reading time 10 minutes Working time 1 hour and 50 minutes Write

Διαβάστε περισσότερα

2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing

2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing 2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN

Διαβάστε περισσότερα

PortSip Softphone. Ελληνικά Ι English 1/20

PortSip Softphone. Ελληνικά Ι English 1/20 PortSip Softphone Ελληνικά Ι English 1/20 1. Περιεχόμενα 2. Εγκατάσταση σε Smartphone & Tablet (Android ή ios)... 1 3. Εγκατάσταση σε ηλεκτρονικό υπολογιστή (Windows ή Mac).... 5 4. Installation in Smartphone

Διαβάστε περισσότερα

Code Breaker. TEACHER s NOTES

Code Breaker. TEACHER s NOTES TEACHER s NOTES Time: 50 minutes Learning Outcomes: To relate the genetic code to the assembly of proteins To summarize factors that lead to different types of mutations To distinguish among positive,

Διαβάστε περισσότερα

9.09. # 1. Area inside the oval limaçon r = cos θ. To graph, start with θ = 0 so r = 6. Compute dr

9.09. # 1. Area inside the oval limaçon r = cos θ. To graph, start with θ = 0 so r = 6. Compute dr 9.9 #. Area inside the oval limaçon r = + cos. To graph, start with = so r =. Compute d = sin. Interesting points are where d vanishes, or at =,,, etc. For these values of we compute r:,,, and the values

Διαβάστε περισσότερα

TRIGONOMETRIA: ANGOLI ASSOCIATI

TRIGONOMETRIA: ANGOLI ASSOCIATI FACOLTÀ DI INGEGNERIA CORSO DI AZZERAMENTO - MATEMATICA ANNO ACCADEMICO 010-011 ESERCIZI DI TRIGONOMETRIA: ANGOLI ASSOCIATI Esercizio 1: Fissata in un piano cartesiano ortogonale xoy una circonferenza

Διαβάστε περισσότερα

ΔΙΕΘΕΡΜΙΕΣ ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ

ΔΙΕΘΕΡΜΙΕΣ ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΔΙΕΘΕΡΜΙΕΣ ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ GIMA DIATERMO MB122 - mono/bipolar - 120 W Minimum preselectable power: 0 Level step: 1 Maximum output power CUT (W): 120-250 ohm Maximum output power BLEND (W):

Διαβάστε περισσότερα

3.4 SUM AND DIFFERENCE FORMULAS. NOTE: cos(α+β) cos α + cos β cos(α-β) cos α -cos β

3.4 SUM AND DIFFERENCE FORMULAS. NOTE: cos(α+β) cos α + cos β cos(α-β) cos α -cos β 3.4 SUM AND DIFFERENCE FORMULAS Page Theorem cos(αβ cos α cos β -sin α cos(α-β cos α cos β sin α NOTE: cos(αβ cos α cos β cos(α-β cos α -cos β Proof of cos(α-β cos α cos β sin α Let s use a unit circle

Διαβάστε περισσότερα

Gruppo idraulico solare a singola via

Gruppo idraulico solare a singola via Gruppo idraulico a singola via per impianti solari termici ΣΥΓΚΡΟΤΗΜΑ ΚΥΚΛΟΦΟΡΗΤΗ ΜΟΝΗΣ ΓΡΑΜΜΗΣ ΓΙΑ ΗΛΙΑΚΑ ΣΥΣΤΗΜΑΤΑ ΒΕΒΙΑΣΜΕΝΗΣ ΚΥΚΛΟΦΟΡΙΑΣ Il Descrizione Περιγραφή gruppo di circolazione viene utilizzato

Διαβάστε περισσότερα

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code) FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM

Διαβάστε περισσότερα